Jan-Simon Moeller [Wed, 23 Feb 2022 13:58:29 +0000 (14:58 +0100)]
Prepare Lucky Lamprey 12.1.1 release
Update the distro configuration file.
Bug-AGL: SPEC-4267
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I18195e4be2a63d1838a9b2c9496aa75939effb4f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27218
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Mon, 14 Feb 2022 23:39:44 +0000 (18:39 -0500)]
meta-agl-bsp: BBMASK out rcar3 base-files and systemd modifications
To avoid breaking changes to systemd-tmpfiles' default behavior,
disable the base-files and systemd bbappends in meta-rcar-gen3 with
BBMASK. The changes in the BSP seem aimed at fixing an issue with
a particular NFS root configuration that does not apply to upstream
AGL, and break the documented expected behavior of systemd-tmpfiles
with respect to configuring files/directories under /var/volatile.
Additionally, this potentially improves shared state reuse across
aarch64 machine builds.
Bug-AGL: SPEC-4256
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I03807d2190a963f8cdf303d07f00fc1c099d230e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27200
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
49d3bdfdc0be53b5a857159a57073a7382b8453c)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27179
Ronan Le Martret [Wed, 26 Jan 2022 10:14:55 +0000 (11:14 +0100)]
[RCAR] Update RCAR BSP to 5.9.0
Update driver for the new RCAR BSP v5.9.0
From files:
R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-
20220121.zip
R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-
20220121.zip
From URL:
https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-h3-m3-documents-software
Bug-AGL: SPEC-4234
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I570347da7d667cdf1cbd83eaf08cabbbaf97af7e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27163
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Fri, 28 Jan 2022 14:34:25 +0000 (15:34 +0100)]
[RCAR] Fix block device performance decreased
* After the RCAR BSP 5.5.O, the block device performance decreased.
The root cause is a change in the default kernel configuration of the BSP
(CPU Frequency scaling) from (RCAR BSP 4.7.0):
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
\# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
To its new default (RCAR BSP 5.5.0)
\# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
You can check current value at runtime using:
cat /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
cat /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
To mediate the regression we do switch back to the PERFORMANCE governor.
Bug-AGL: SPEC-4205
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I6d19d92dae9dd8c7977e2034215fce07d8318773
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27108
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
(cherry picked from commit
d32ed899583ab14e6442f76dd1c78695f9c0ec33)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27177
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Ashok Sidipotu [Fri, 14 Jan 2022 15:38:56 +0000 (21:08 +0530)]
pipewire: update to pw 0.3.43 and wp 0.4.7
Change-Id: I3e478f5e1215d128f0d76ffb2b18c278d90de266
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27090
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Marius Vlad [Tue, 28 Dec 2021 14:48:17 +0000 (16:48 +0200)]
meta-agl-core/recipes-graphics/wayland: Backport two fixes for libweston-8
This backports two small fixes for some potential libweston crashes
happening on the DRM backend tear down, or EGL initailization failure
paths.
Bug-AGL: SPEC-4197
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Idc28bb7ef6d8fde8c149bb5eb35a2ba40a25706a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27018
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ashok Sidipotu [Thu, 6 Jan 2022 01:16:45 +0000 (06:46 +0530)]
policy: fix record not working
Define a capture endpoint to get record working.
Change-Id: I3356736676bf112249b078ffeb16548cfa3daea3
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27073
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Sat, 18 Dec 2021 22:41:05 +0000 (23:41 +0100)]
Post 12.1.0 change to distro configuration
The release is out, update the distro configuration file.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I891575f0f694bb0dd98b0e9d7abaa62e266a146b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27037
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Ashok Sidipotu [Wed, 1 Dec 2021 08:17:25 +0000 (13:47 +0530)]
pipewire: update to pw 0.3.40 and wp 0.4.5
Change-Id: Ie9e3fd0a67e6a5fa38543cb9b4cc54f2e0555813
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26953
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Tue, 7 Dec 2021 17:16:59 +0000 (18:16 +0100)]
Update SDK installation path variable name
Upstream YP changed the variable for the SDK installation folder.
in https://git.yoctoproject.org/poky/commit/?h=dunfell&id=
67dbe8a1c2b485d0cec174d28107b0ac8ea77d5f
thus adapt our distro configuration.
Bug-AGL: SPEC-4172
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I6a77286801619252b9ac14196af08723817cadc4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26971
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Moeller [Wed, 1 Dec 2021 22:31:33 +0000 (23:31 +0100)]
Update the distro config for lamprey 12.1.0
Change the version and the SDE timestamp.
Bug-AGL: SPEC-4163
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I6bff37ca3c045720dc2b75e300a349b26fdc288d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26950
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
Scott Murray [Mon, 2 Aug 2021 21:10:51 +0000 (17:10 -0400)]
Convert to new override syntax
This is effectively a manual cherry-pick and squash of commits:
dd6fc5dcaa0a027b7651bb365d5dd0f623498f8f
917a82316bf53ead29d6345a39189d9e4efeef25
20e81c0a9d36660de671dd5ac2e006e31c0e621b
from the master branch with additional review and fixups.
The intent of these changes is to minimize the effort to backport
fixes from the master branch, which has been updated in preparation
for the switch to the next Yocto LTS release in early 2022.
Bug-AGL: SPEC-4144
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I91c1640c6335d7748a2531d2fe8bf86d2d2aee32
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26876
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Marius Vlad [Thu, 18 Nov 2021 15:30:51 +0000 (17:30 +0200)]
agl-compositor_git: Bump SRCREV
This update includes the following bug-fixes:
-
59b6881bc31538 layout: Fix-up the positions when placing the pop-up/dialog
-
10d2c1d637e9ef shell: Fix passing maximized state from the start
Bug-AGL: SPEC-4127, SPEC-4119
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: Ic8b6a9d57052e8f85f2e896d7c8724e66b028ff6
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26879
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Tue, 5 Oct 2021 16:51:16 +0000 (12:51 -0400)]
meta-agl-bsp: reference hardware updates for BSP v5.5.0
Update the AGL reference hardware devicetree and U-Boot configuration
names to work with the Renesas BSP v5.5.0 update and related
meta-agl-refhw changes.
Bug-AGL: SPEC-4103
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit
fe29f1717f6ee309273507724c488a6b5fbb5598)
Change-Id: I94db9390c2ec3d2b0cd9b1c0167570d813f2bae3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26867
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Fri, 29 Oct 2021 09:55:26 +0000 (18:55 +0900)]
[RCAR] Fix HDMI display connector exchanging
This patch always keeps SK's HDMI to HDMI-A-1 when using KF.
Normally, when using KF, HDMI-A-2 is assigned to SK's HDMI.
It is a patch that avoids SK's HDMI becoming 2nd HDMI,
and it is a commit that corrects the code for BSP v5.5.0.
Bug-AGL: SPEC-4123
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I68351317861fdeb4668ff5bbae420f6cfa24a3a3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26826
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Fri, 29 Oct 2021 14:12:01 +0000 (16:12 +0200)]
[RCAR] Add missing dependency for board M3+KF
* For the RCAR BSP v5.5.0 we need a yocto layer:
- poky/meta-yocto-bsp
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: If5f4701e1bf1973f1f20f47f9496f07024e0f347
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26825
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Tue, 21 Sep 2021 07:34:09 +0000 (09:34 +0200)]
[RCAR] Add missing dependency on wayland
* Previous RCAR BSP provides lib /usr/lib/libpvrWAYLAND_WSEGL.so inside
package gles-user-module. Now libpvrWAYLAND_WSEGL.so is in an independent
package name wayland-wsegl.
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I6bb80d44fd26d25aca860976575d45e65688b6cd
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26824
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Tue, 21 Sep 2021 07:30:13 +0000 (09:30 +0200)]
[RCAR] Add missing build dependency for wayland-wsegl
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: Ia724303015235fd03fe633125ef79cd3eaef9739
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26823
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Tue, 22 Jun 2021 13:34:18 +0000 (15:34 +0200)]
[RCAR] Update RCAR BSP recipes to 5.5.0 version
* rename the dts/dtsi file, the new BSP 5.5.0 change the file name of
the dts file.
* update the driver files hash
* Add "meta-yocto-bsp" to BBLAYERS, it's new dependency of meta-renesas.
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I3d8edb2d924e43dabd16466fd68015b5be1a40d2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26822
Tested-by: Jenkins Job builder account
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Wed, 15 Sep 2021 16:30:10 +0000 (18:30 +0200)]
[RCAR] Fix kernel-module-gles build
* In the new RCAR BSP 5.5 one file missing from prevous BSP,
this file was only a kind of a link. This patch just fix this missing
file.
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: Ia4cdf794b16aff8e12a64fcccfecce85336619e7
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26821
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Tue, 2 Nov 2021 23:13:20 +0000 (19:13 -0400)]
meta-agl-bsp: remove old Raspberry Pi U-Boot recipe
Newer U-Boot recipes were added to pick up the 4B support, remove
the older ones since they are no longer used.
Bug-AGL: SPEC-4072
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iedc9b7ec189316319296d2a23c0293559e83566c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26778
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
54a20427a2c553165ce9a8393aeda218e7aa310e)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26803
Scott Murray [Tue, 2 Nov 2021 23:15:07 +0000 (19:15 -0400)]
Update github.com git:// SRC_URIs
GitHub is dropping unauthenticated git protocol access in
January 2022, per:
https://github.blog/2021-09-01-improving-git-protocol-security-github/#no-more-unauthenticated-git
While a workaround in the BitBake git fetcher is forthcoming, not
specifying protocol=https for github.com git:// SRC_URIs will start
resulting in warnings in Yocto 3.5/Kirkstone. To ease our upgrade
path, go ahead and update our affected SRC_URIs. Note that this has
been done by running the scripts/contrib/convert-srcuri.py script
from latest poky, which also makes git branch specification explicit
since the git fetcher is likely to require that in the future due
to widespread switches from master to main branches.
Bug-AGL: SPEC-4126
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I1b5003a79de5283f88bb51f2decadbabeaff8ed5
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26779
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
abc4742a714cfc60a868c0912432a6f59fd41b77)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26800
Hiroyuki Ishii [Tue, 29 Jun 2021 08:13:03 +0000 (17:13 +0900)]
qt5: Fix timer leak in qtwayland to avoid animations being sluggish
With long-running qt applications which have fluid animations
in wayland environment, the animation becomes obviously sluggish
because massive amount of memcpy() is called through a constructor
being placed in a loop in QTimerInfoList::timerInsert() function.
This is caused by a timer-index leak bug of qtwayland, which is
already reported to the qt project as following ticket.
https://bugreports.qt.io/browse/QTBUG-79838
Unfortunately QTBUG-79838 is still open because maintenance of
non-commercial version of qt5 is already stopped. However, we've
confirmed that the patch attached to that ticket works fine
except for that part of it is no longer needed due to the deletion
of the code. So let's apply only effective part of it.
Bug-AGL: SPEC-3991
Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Change-Id: Ib148b81aabb98e8df10c1414cdbfe26f7ddf09a6
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26466
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26759
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Naoto YAMAGUCHI <naoto.yamaguchi@aisin.co.jp>
Scott Murray [Thu, 7 Oct 2021 18:43:58 +0000 (14:43 -0400)]
meta-app-framework: bump version for dbus bbappend
Rename the dbus bbappend to handle the upgrade to 1.12.20 in the
poky 3.1.11 update.
Bug-AGL: SPEC-4104
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2876920f0ac949f4dee0835af03c096c4e186973
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26729
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
3b7fb84007945e5b19c705b24179260cad05ba55)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26683
Hiroyuki Ishii [Thu, 9 Sep 2021 01:43:22 +0000 (10:43 +0900)]
raspberrypi: Upgrade to u-boot v2021.07 for latest 4B boards
The latest revision (1.4) of raspberry pi 4B board can't be boot
by using current version of u-boot with showing "No partition
table" message. This can be related to the change of DMA hardware
on the new SoC (2711ZPKFSB06C0T) and we've confirmed upgrading
u-boot to newer version than 2021.04 which has several fixes
around Broadcom's DMA solves the issue. Also, we'd like to choice
2021.07 rather than 2021.04 since it's going to be supported for
longer in yocto project.
Bug-AGL: SPEC-4072
Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I0f396611cb76230dd91c6d42b9f2a7cfb92909df
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26664
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Jan-Simon Moeller [Sun, 19 Sep 2021 21:26:38 +0000 (23:26 +0200)]
Post 12.0.1 update to distro config
Update the distro config file.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I6b0eb6fdffb57a87568468ec9bfdf5bff716f5d2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26661
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Wed, 15 Sep 2021 13:51:22 +0000 (09:51 -0400)]
meta-agl-bsp: Add reference hardware WLAN card support
Add the required firmware for the reference hardware WLAN card to
MACHINE_EXTRA_RRECOMMENDS in the agl-refhw-h3 feature include file.
Bug-AGL: SPEC-4071
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Idf2e35bea3be4e030245b36333c50a568cb2a01b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26656
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Tue, 14 Sep 2021 19:32:34 +0000 (21:32 +0200)]
Inject multimedia package specific to rcar platform
The packagegroup agl-graphical-multimedia needs to be extended
to pull in the BSP specific packagegroups.
Bug-AGL: SPEC-4029
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ieed3263884304a7d00d9f468583f3db9370e3741
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26634
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
(cherry picked from commit
ae07296dfa03edd1eb25e0a632960bf71956c738)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26592
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Scott Murray [Fri, 10 Sep 2021 20:38:55 +0000 (16:38 -0400)]
xmlsec1: remove backported patch
The backported host contamination fix for xmlsec1 can now be
removed since meta-oe now includes it.
Bug-AGL: SPEC-4051
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2b41872f67c25cdbd4e250a399293afde2284a27
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26630
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Mon, 6 Sep 2021 20:13:46 +0000 (22:13 +0200)]
Prepare Lucky Lamprey 12.0.1 patch release
Update the distro configuration.
Change-Id: Id394214798dd7f1ee61739637ffb8b492f3f3a32
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26616
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Marius Vlad [Wed, 1 Sep 2021 14:46:10 +0000 (16:46 +0200)]
agl-compositor: Bump SRCREV
This bumps up SRCREV to include 'compositor: Do not allow vt-switching
by default'.
Note this patch also includes
- re-building libweston with headless backend as lamprey was cut after
some of the changes made into agl-compositor and it those it requires
having the headless backend installed
- includes the libcompositor updates required to avoid QA build errors
- compliance with weston ini configuration wrt to loading up systemd
plugin.
Bug-AGL: SPEC-4063
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I9abbb84895de2e37d814ff0485ae0d004982fc34
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26604
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Thu, 12 Aug 2021 13:30:38 +0000 (15:30 +0200)]
Add backported patch to overcome host contamination issue
This patch is required to fix a cross-compilation issue due to host contamination.
It is a backport from meta-openembedded master branch and submitted to dunfell.
Bug-AGL: SPEC-4051
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I22aa1777d1e8606c54c873f53e380263f8f8a05b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26578
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Marius Vlad [Wed, 4 Aug 2021 19:44:02 +0000 (21:44 +0200)]
recipes-graphics/wayland/weston-ini-conf: Add missing transmitter-output
Seems that re-shuffling of recipes missed out the transmitter-output
file when using waltham-remoting (in AGL_FEATURES).
Bug-AGL: SPEC-4047
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I589960eb13532cfaab66a6d32ca79a8628398563
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26553
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Kenji Hosokawa <khosokawa@jp.adit-jv.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
ce21cba7432a434c359235be901fa0efb9c7b784)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26526
Scott Murray [Tue, 27 Jul 2021 19:46:51 +0000 (15:46 -0400)]
meta-agl-bsp: add "kingfisher" to AGL_FEATURES for -kf builds
To be able to detect when building with Kingfisher support in
recipes, add a "kingfisher" feature to AGL_FEATURES. This should be
lower impact on builds than an override wrt sharing sstate between
builds, and matches what has been done for the refhw support with
h3ulcb.
Bug-AGL: SPEC-4023
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I8f8eb148b94cdc8e80b0600b3112e45d1e709948
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26544
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
92514559f9b195e6b58128a7492239ff50e23dec)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26525
Scott Murray [Thu, 1 Jul 2021 17:11:46 +0000 (13:11 -0400)]
meta-agl-bsp: Enable building agl-refhw-h3 firmware
Changes:
- Replace the agl-refhw-h3 addition to MACHINEOVERRIDES with just
using AGL_FEATURES. With the rework of the arm-trusted-firmware
bbappend in meta-agl-refhw, the override is no longer necessary,
and a feature in AGL_FEATURES makes more sense in the context of
this not being a separate machine in the AGL build, but just a
feature.
- Remove BBMASK so the arm-trusted-firmware bbappend from
meta-agl-refhw-gen3 will now be picked up.
- Hook up building the U-Boot variant for the refhw by extending
UBOOT_CONFIG.
- Remove the compatible machine declaration from gpsd-conf-refhw,
as we're using the package in h3ulcb images anyways.
Bug-AGL: SPEC-3916
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ibe3ecdbe74811793c0e030df28a64b3052d64f47
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26476
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
bc4666c43c67a666e1cf6706b601b397fd0f5548)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26522
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Moeller [Wed, 21 Jul 2021 10:08:15 +0000 (12:08 +0200)]
Post 12.0.0 change of the distro config
Apply the post-release change to the distro config.
The Lucky Lamprey branch is now open for changes towards 12.0.1.
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Ia03a8e0be88794117d879dd054115fa4730af7fc
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26506
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Tue, 13 Jul 2021 11:10:20 +0000 (13:10 +0200)]
Prepare release of Lucky Lamprey v12.0.0
Prepare the release of Lucky Lamprey v12.0.0 .
Change-Id: I868d4470aa92b9a298dfb24a19a7261ee545b57b
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26499
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Tue, 13 Jul 2021 11:08:11 +0000 (13:08 +0200)]
Post M3 update of distro configuration
Update after Milestone 3 is released.
Change-Id: Ide3ecd049573a49f5e7858b8d5f620ee0d02b016
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26498
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Fri, 2 Jul 2021 20:07:21 +0000 (22:07 +0200)]
Prepare Lucky Lamprey Milestone 3
Update the distro configuration.
Change-Id: Ib7ffb28cc71da5b28f95bcbe89c6b3fadbe981c7
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26479
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
George Kiagiadakis [Thu, 1 Jul 2021 09:44:58 +0000 (12:44 +0300)]
pipewire: fix timerfd deadlock issue
Bug-AGL: SPEC-3957
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I5f41e4161b281473cebc3cb3d8e27c2c93b457be
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26399
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Thu, 1 Jul 2021 12:43:57 +0000 (14:43 +0200)]
Update AGL_BRANCH to lamprey
Update the distro configuration for Lucky Lamprey
Change-Id: I55bb62a90bbeeed581af7ce95cd5b531c461cade
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26474
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Möller [Wed, 30 Jun 2021 21:56:32 +0000 (23:56 +0200)]
Add gitreview file for Lucky Lamprey branch
Update the .gitreview file.
Change-Id: I91e119acbde35ef76b1cd3aed2d6f5c380cb0ae8
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Scott Murray [Sun, 27 Jun 2021 18:36:00 +0000 (14:36 -0400)]
Refactor kernel configuration fragment handling
Refactor the kernel configuration fragment handling to shift all AGL
applied configuration fragments into a new AGL_KCONFIG_FRAGMENTS
variable that is used to generate SRC_URI and KERNEL_CONFIG_FRAGMENTS
additions for the various BSPs. The intent is to make it simple to
disable AGL provided configuration in downstream builds as the IC EG
has expressed as a requirement. Additionally, the rework has allowed
for some clean up of accumulated cruft.
In practice, clearing AGL_KCONFIG_FRAGMENTS drops all non-BSP provided
kernel configuration with the exception of some qemu BSP related
additions required for AGL CI and some explicitly configurable things
like netboot support.
Notable changes:
- Instead of always using AGL's own fragment merging logic on top of
the BSP kernel recipe, an effort is now made to leverage the BSP
recipes' own merging schemes, so there are now separate include
files for kernel-yocto.bbclass and plain kernel.bbclass based kernel
recipes, as well as a common include file that defines the
AGL_KCONFIG_FRAGMENTS variable and its derivations. That file can
be included directly in bbappends for BSP kernel recipes that use
the KERNEL_CONFIG_FRAGMENTS scheme (e.g. meta-ti, meta-qcom).
- The SMACK enabling configuration in meta-app-framework has been
updated to supply different fragments for enabling SMACK by default
for 4.x and 5.x kernels. This removes a warning from always
supplying the old configuration, and allows providing a CONFIG_LSM
definition to ensure over-riding any BSP modifications.
This allows removing the previous hack to handle CONFIG_LSM being
set in the defconfigs in linux-raspberrypi.
- By request, the linux-yocto support from meta-agl-bsp/meta-core has
been rationalized into meta-agl-core to improve the experience when
using meta-agl-core standalone for testing.
- All demo supporting kernel configuration has been removed, a
subsequent change to meta-agl-demo will add it there by leveraging
AGL_KCONFIG_FRAGMENTS.
- The hardware device support has been split out of the can-bus.cfg
fragment, in favor of shifting it to meta-agl-demo. A few other
stray non-CAN configuration options have also been removed from
can-bus.cfg, as they do not seem to be required.
Bug-AGL: SPEC-3983
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If6662fd36e26cec767b1d53b1188a74d01ef9dcf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26460
Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Thu, 24 Jun 2021 18:33:08 +0000 (14:33 -0400)]
packagegroup-agl-core-devel: remove duplicate profiling tools
Remove perf and powertop from packagegroup-agl-core-devel since they
are already in packagegroup-core-tools-profile which gets pulled in
when agl-devel is used. For perf in particular, this simplifies
avoiding dependencies on the kernel source being available when
building container images.
Bug-AGL: SPEC-3983
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I472ab2209dc89e76bb561189e711f45bad480e94
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26456
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Thu, 24 Jun 2021 16:56:21 +0000 (18:56 +0200)]
Post release bump after LL m2
Update the distro configuration.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I0c5be0ffc3f9b7e4b59b98d4eac6d5439900b4f5
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26455
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
vasyl [Mon, 14 Jun 2021 17:39:50 +0000 (20:39 +0300)]
aglsetup: Fix append_fragment fails with heredocs on Ubuntu 21.04.
Looks like bash creates temporary file for heredocs and passes fd to
deleted file to command that use heredocs. Therefore, it is better not
to use '[[ -f /dev/stdin ]]' in case of heredocs.
Replaced it with more relaxed condition.
Bug-AGL: SPEC-3990
Change-Id: Ib68d1510dd6899b0f60b207071b222ef1933bf77
Signed-off-by: vasyl <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26428
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Wed, 23 Jun 2021 19:33:43 +0000 (21:33 +0200)]
Update license handling for pipewire recipe
We need to set LICENSE to multiple (MIT & GPL-2.0-only & LGPL-2.1-or-later) to satisfy
the current scheme required by bitbake.
But the licenses of the output packages are not all 3,
but mostly MIT and a few LGPL-2.1-or-later and one GPL-2.0-only.
To map the dynamically created output packages with the proper MIT license,
we need to call setVar after all dynamic packages are created.
Bug-AGL: SPEC-3844
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I0900902af2527254869c125ec90239c9afb26f3c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26449
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Scott Murray [Mon, 14 Jun 2021 22:12:31 +0000 (18:12 -0400)]
Remove default inclusion of kernel-modules
Remove the kernel-modules meta package append to IMAGE_INSTALL
from the default base-agl.inc aglsetup.sh template, as it essentially
turns a developer convenience into default behavior that may not be
desirable by all users. Note that this does change the contents of
agl-image-(boot|minimal|weston) with respect to kernel modules on
most platforms, but if this proves problematic it is recommended that
kernel-modules be added back elsewhere in a more transparent fashion.
A corresponding change will be made in meta-agl-demo to retain the
behavior for the demo platform images.
Bug-AGL: SPEC-3983
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ie1098f25d69e721345d13db3681278543d594e78
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26431
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Corentin Labbe [Wed, 16 Jun 2021 08:46:28 +0000 (08:46 +0000)]
SPEC-3976: qemuarm: remove CONFIG_ARM_LPAE
CONFIG_ARM_LPAE cause sndHDA failure.
Furthermore, this permits to mimic real AGL ARM board which dont have LPAE.
Bug-AGL: SPEC-3976
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Change-Id: I0f48feadc8aa04427ffb2365cf319e2dcbe32ff3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26435
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Mon, 14 Jun 2021 22:05:47 +0000 (18:05 -0400)]
rcar3: move extra kernel modules to MACHINE_EXTRA_RRECOMMENDS
The appending of the rcar3 graphics related kernel modules to
IMAGE_INSTALL in agl_rcar.inc is problematic for users building
headless or container targetted images. To avoid this, instead
append them to MACHINE_EXTRA_RRECOMMENDS, which will result in
them being pulled in via packagegroup-machine-base. Users not
desiring them can then either disable package recommendations
or not pull in packagegroup-machine-base. In practice, this
has no effect on any of the current images in meta-agl-core or
meta-agl-demo, but it is required for the IC EG guest container
build for rcar3 platforms.
Bug-AGL: SPEC-3983
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I309926b6dc31614fb7c710b0a302716942d07df8
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26430
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Tue, 22 Jun 2021 15:08:25 +0000 (15:08 +0000)]
pipewire: fix alsa virtual device to work again
* Install symlinks to the configuration files in /etc/alsa/conf.d
* Add patch from pipewire master to support roles on the virtual
alsa device
Bug-AGL: SPEC-3822
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: Ie411df23390754e2cdc494657eb9881771b8c401
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26447
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Fri, 11 Jun 2021 08:33:59 +0000 (11:33 +0300)]
pipewire: update to pw 0.3.30 and wp 0.4.0
* The pipewire recipe has been synced with the upstream yocto one
* WirePlumber configuration now has volume ducking enabled for
navigation messages. This means that music will now duck when
a navigation message plays instead of being corked.
* PipeWire's default configuration now lives in /usr/share/pipewire,
with the possibility to override it in /etc/pipewire. This allows
resetting to upstream defaults by removing /etc/pipewire
v2: add licenses to the layer to match the upstream recipe,
adapt licenses of sub-packages
v3: mark each package with the desired license instead of the mix
v4: simplify the license output of the sub-packages
Bug-AGL: SPEC-3844
Change-Id: I7a15ddb503d5b064f244c8a42a1aafb4caa1d46a
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26426
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Sat, 12 Jun 2021 21:22:13 +0000 (17:22 -0400)]
Remove Raspberry Pi 3 support
The raspberrypi3 machine template had only been retained to allow
anyone interested in using one with a telematics or cluster demo
image build to do so. At this point the Pi 4 has been out long
enough that that seems no longer necessary, so removing the
support to avoid confusion and reduce clutter seems warranted.
Bug-AGL: SPEC-3985
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib3770ba03771aff468f94d5bf6f2910fc01f7ee0
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26429
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Sun, 13 Jun 2021 21:24:04 +0000 (23:24 +0200)]
Prepare Lucky Lamprey M2
Update the distro manifest.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Ib87d4a6b4313fe39c7121f691a9768fd4fafa49c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26427
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Mon, 7 Jun 2021 21:29:36 +0000 (17:29 -0400)]
meta-agl-core: dynamically add qtbase bbappend
Add a dynamic layer addition for meta-qt5 that contains a qtbase
bbappend with the required configuration changes for building
it with Wayland support. The aim is to avoid duplication of these
configuration changes among meta-agl-core users.
Bug-AGL: SPEC-3972
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I642ad6e62c10da1b1c2323a13c7d5fa91ba9f028
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26395
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Mon, 7 Jun 2021 21:21:41 +0000 (17:21 -0400)]
Update agl-virt feature
Changes:
- Add AGL_META_FILESYSTEMS hook to bblayers.conf.sample to match
the other common meta-openembedded layer dependencies.
- Update agl-virt 50_bblayers.conf.inc to define the required
AGL_META_* variables for the layers from meta-openembedded that
it requires.
Bug-AGL: SPEC-3970
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iae55fa082bd25cf43bde6152abab40c836cf6279
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26394
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
Scott Murray [Mon, 7 Jun 2021 21:14:20 +0000 (17:14 -0400)]
Add agl-package-management feature
Changes:
- Move addition of package-management to IMAGE_FEATURES and
associated package feed variables to a new agl-package-management
feature template. The feature is not included by default in
the base set.
- To somewhat maintain the previous developer experience the new
feature has been made a dependency of the agl-devel feature.
In practice, the only images affected by this change are
agl-image-minimal and agl-image-weston from meta-agl-core, the
demo platform images in meta-agl have package management enabled
by default.
Bug-AGL: SPEC-3971
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I56665e1cd82db19a697fdae2551a9276eab08961
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26393
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Sun, 30 May 2021 21:01:47 +0000 (17:01 -0400)]
Add initial j7-evm machine support
Add template and inc file for requested j7-evm machine.
Notes:
- The various images have been test built, including the
agl-demo-platform image. No runtime testing has been done due to
lack of hardware.
- The proprietary SGX graphics support has not been enabled. This
is due to both being unable to test, and it being unclear if it
is required given the telematics usecases mentioned with respect
to the hardware.
- The shared TMPDIR for the non-optional multiconfig for building
the bootloader has been shifted to a split one, as failures were
reproducibly being seen when using the rm_work bbclass, and in
general the community recommendation is to not share them. This
does mean that cleaning up a build tree requires removing the
tmp-k3r5 directory in addition to tmp.
Bug-AGL: SPEC-3928
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5c4e325b0b709b6571946475bf128bc25b171f6e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26379
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Sun, 30 May 2021 19:13:37 +0000 (15:13 -0400)]
Remove dra7xx-evm machine support
Remove dra7xx-evm machine template and related BSP configuration
tweaks. The configuration is stale and untested, and no one has
expressed interest in it for long enough that it seems better to
just remove it to avoid confusion about support status.
Bug-AGL: SPEC-3934
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I1659eef113cf1e6fcfdddf65f712275b8fc49b6f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26378
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Sun, 30 May 2021 18:58:49 +0000 (14:58 -0400)]
Update i.MX machine configurations
Changes:
- Add new i.MX and i.MX6 common inc files and shift duplicated
configuration to them.
- Switch to using the newer IMX_BSP_DEFAULT variable mechanism for
selecting mainline vs NXP bits, instead of adding use-mainline-bsp
to MACHINEOVERRIDES.
- Remove the accidental addition of agl-medium-arm-compiler to
DISTRO_FEATURES for the imx8mqevk configurations.
- Remove some other stale variable definitions.
- Update BSP layer path in i.MX6 template 50_setup.sh files, these
were missed on a previous update.
Bug-AGL: SPEC-3933
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I0145e3c8b73b4d53706fda4237ab10f181fd16f7
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26377
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Sun, 30 May 2021 18:47:34 +0000 (14:47 -0400)]
meta-agl-core: Rework packagegroup-agl-core-boot
To avoid the problem of it drift with respect to the upstream
packagegroup-core-boot that it was originally derived from, rework
packagegroup-agl-core-boot to just RDEPEND on it instead. This
has the benefit of making the AGL additions more clearly visible.
Additionally:
- Define VIRTUAL-RUNTIME_base-utils-syslog for packagegroup-core-boot
to match AGL's current default.
- Add a VIRTUAL-RUNTIME_rngd variable to allow downstream users to
remove or replace rng-tools in their distro configuration.
- Explicitly add the packagegroup to IMAGE_INSTALL in the base
agl-image-boot.inc to better match upstream core-image-minimal in
definition, and make sure that any derived image that is created by
including the inc file (instead of the bb file) is usable.
Bug-AGL: SPEC-3932
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib82d5d6b561eca4d059c56b01a0caddefcb48776
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26376
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
Jan-Simon Moeller [Mon, 31 May 2021 10:59:33 +0000 (12:59 +0200)]
Remove old cyclone5 template
This is no longer in active use and will be removed.
Bug-AGL: SPEC-3943
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I7b9026fb5013d7534a96c04a0617e5f50a95aa5c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26380
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Naoto Yamaguchi [Tue, 18 May 2021 23:04:56 +0000 (08:04 +0900)]
Remove connman-plugin-session-policy-local
A packagegroup-agl-core-connectivity require to connman-plugin-session-policy-local in all case.
On the other hand, connman-plugin-session-policy-local is enabled in case of AGL_FEATURES with aglcore.
When the meta-agl use without aglcore, building for packagegroup-agl-core-connectivity will fail.
This patch remove to connman-plugin-session-policy-local in all case.
Because connman-plugin-session-policy-local is not using.
Bug-AGL: SPEC-3924
Signed-off-by: Naoto Yamaguchi <naoto.yamaguchi@aisin.co.jp>
Change-Id: Icb9d3bca640a93348857e17a195ac6d1a20d30bb
Signed-off-by: Naoto Yamaguchi <i33399_yamaguchi@aisin-aw.co.jp>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26356
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
Jan-Simon Möller [Tue, 25 May 2021 13:56:17 +0000 (15:56 +0200)]
Post release update to distro config
M1 is being released. Update the distro configuration
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I4d2edaed3fa311f357c42aff3c0d4b901e867911
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26373
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Jan-Simon Moeller [Thu, 13 May 2021 22:02:28 +0000 (00:02 +0200)]
Prepare Lucky Lamprey Milestone 1
Adapt distro configuration for LL m1 .
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: If86cb91e6742bffb1e6a5aa8f93b9c37b754b4ca
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26353
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Marius Vlad [Wed, 12 May 2021 09:59:13 +0000 (12:59 +0300)]
agl-shell-activator_git: Add recipe
This adds the recipe for agl-activator/agl-shell-activator, a simple
tool that switches (already started) applications. It assumes the first
output, but can be enhanced to support use multi output if needed.
Bug-AGL: SPEC-3817
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I32f8bb246d75591cd7fc4f7d4b4047ee2b8f1b09
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26348
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Tue, 11 May 2021 08:34:16 +0000 (11:34 +0300)]
wireplumber: update to 0.4 rc1
* Update the bluetooth config to be aligned with the default upstream config
* Make a2dp streams use the Multimedia role instead of Communication
* Add wireplumber.conf in the agl config, which is now required
Bug-AGL: SPEC-3844
Change-Id: Ifdc61065593b7cbd366dd490689135f0973ebf66
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26340
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Thu, 6 May 2021 15:50:43 +0000 (11:50 -0400)]
meta-pipewire: add meta-oe dependency
Add LAYERDEPENDS definition to meta-pipewire's layer.conf, meta-oe is
now a dependency due to Wireplumber's use of lua.
Bug-AGL: SPEC-3909
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia57de5b43cca86a5b5260a06494ef43dec6ae675
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26343
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Mon, 10 May 2021 16:07:57 +0000 (19:07 +0300)]
pipewire: backport pipewiresink patches to fix stuttering and other issues
Bug-AGL: SPEC-3900
Change-Id: Ib93772c58b4177b8e72713e4d395c9244732e907
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26338
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Fri, 7 May 2021 07:59:42 +0000 (10:59 +0300)]
pipewire: update to 0.3.27
Bug-AGL: SPEC-3900
Bug-AGL: SPEC-3844
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I36eba1a6ad1342351b668360c2c812f0a9bb3632
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26333
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Fri, 23 Apr 2021 20:32:24 +0000 (16:32 -0400)]
meta-agl-core: remove IMAGE_FSTYPES override
Remove the anonymous python logic added to override any changes
to IMAGE_FSTYPES via _append/_remove by BSPs to fix SPEC-3741.
The updated Renesas BSP no longer does so, and removing this
logic avoids issues when using meta-agl-core with distribution
configurations other than poky-agl.
Additionally:
- Change the IMAGE_FSTYPES and INITRAMFS_FSTYPES assignments in
poky-agl.conf back to regular ("=") instead of immediate
(":=") so that things like the _appends being done to
AGL_DEFAULT_IMAGE_FSTYPES for netboot and CI usecases will
take affect. They were only currently working because of the
later evaluation in the anonymous python logic that is being
removed.
- Rationalize agl-image-minimal.inc to just include
agl-image-boot.inc, and remove the unnecessary use of the
AGL_EXTRA_IMAGE_FSTYPES variable in agl-image-boot.inc.
Bug-AGL: SPEC-3897
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Id655683c705678dd3ab1caff8980dba06f46a1bc
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26292
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
Marius Vlad [Thu, 8 Apr 2021 13:22:05 +0000 (16:22 +0300)]
meta-agl-core/recipes-graphics/wayland: Do not export seat related functions
We're only using the seat initialization parts for
waltham-transmitter-plugin so add them only there. So far there's only a
user for it (the transmitter-plugin) so it is easier to just build it
conditionally for now.
Bug-AGL: SPEC-3879
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I3af5578c319c361babf3fc5497517f2b075a4271
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26244
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Thu, 15 Apr 2021 17:21:22 +0000 (20:21 +0300)]
virtio: Backport virtio sound driver.
Added patch series is the latest implementation [1] of virtio sound
device [2] driver. It was accepted [3] by sound maintainer for the next
kernel version.
virtio-snd.cfg snippet has been generated using menuconfig/diffconfig
tasks by selecting SND_VIRTIO, other configs have been selected
automatically.
[1]: https://lore.kernel.org/alsa-devel/
20210302164709.
3142702-1-anton.yakovlev@opensynergy.com/
[2]: https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-sound.tex
[3]: https://lore.kernel.org/alsa-devel/s5hsg575q5z.wl-tiwai@suse.de/
Bug-AGL: SPEC-3894
Change-Id: Ide484b4a70e5d2aef0726f701f87d783e128c4d3
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26291
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Thu, 15 Apr 2021 17:18:59 +0000 (20:18 +0300)]
virtio: Bump virtio-aarch64 kernel to version v5.10.
There are a number of virtio drivers [1,2] developed on top of newer
kernel version. To simplify their backporting it is better to have
newest possible kernel version. Use v5.10 since at the moment it is
latest available Linux Yocto kernel. As a sacrifice, some external
kernel modules have to be disabled since they fail to compile with newer
kernel.
Recipe imported from
repo: https://git.yoctoproject.org/cgit/cgit.cgi/poky/
branch: master
commit:
a870101
path: meta/recipes-kernel/linux/linux-yocto_5.10.bb
[1]: https://lore.kernel.org/alsa-devel/
20210302164709.
3142702-1-anton.yakovlev@opensynergy.com/
[2]: https://lore.kernel.org/linux-arm-kernel/
20201105212116.411422-1-peter.hilber@opensynergy.com/
Bug-AGL: SPEC-3894
Change-Id: I8ac793c1075bdeaa96d03252b97abcf983bb7ee0
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26290
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Wed, 16 Dec 2020 18:03:37 +0000 (20:03 +0200)]
virtualization/linux-yocto: Fix multitouch with virtio-input.
Multitouch support with virtio-input was broken which can be observed:
* by running weston-simple-touch with weston compositor (
weston-simple-touch does not work with AGL compositor due to XDG shell
issues)
* by doing pinch to zoom in/out on navigation app map
Change-Id: I3ec2a989a4217ebe22cee9cf1640190ca8e2bb81
Bug-AGL: SPEC-3893
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26289
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Wed, 16 Dec 2020 16:47:15 +0000 (18:47 +0200)]
virtualization/linux-yocto: Add virtio-aarch64-standard.scc to SRC_URI.
It allows to use patch command to apply patches via scc file.
As explained in [1,2], Yocto kernel metadata is commonly used for two
purposes:
1. To construct Yocto kernel git by committing patches listed in scc
files.
2. To configure Yocto kernel during Yocto build.
When scc file is not explicitly added to SRC_URI, then patch commands
will be ignored during Yocto build because it is assumed that patches
are already pre-applied during Yocto kernel git tree construction.
On the other hand, nopatch should be added to standard.scc because
patches from it are actually pre-applied.
[1]: https://www.yoctoproject.org/pipermail/yocto/2019-October/046986.html
[2]: https://docs.yoctoproject.org/kernel-dev/maint-appx.html
Change-Id: Id238e79e1b354daaa23e83bef45fc93a216fbf92
Bug-AGL: SPEC-3893
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26288
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Fri, 16 Apr 2021 13:01:41 +0000 (13:01 +0000)]
virtualization/linux-yocto: Reorganize layout of linux-yocto kernel virtio metadata.
Follow layout of yocto-kernel-cache, this makes code a little bit more
understandable and familiar for one who worked with yocto-kernel-cache.
Change-Id: I1ad65039a1738b928069d035d485e2728e8a55b2
Bug-AGL: SPEC-3893
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26287
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
George Kiagiadakis [Thu, 11 Feb 2021 12:13:55 +0000 (14:13 +0200)]
meta-pipewire: update to pipewire 0.3.25 and wireplumber master
Bug-AGL: SPEC-3844
Change-Id: Ie32bfa43bf078c7d218d3150dc616501b8848bd0
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26094
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Marius Vlad [Tue, 20 Apr 2021 16:33:25 +0000 (19:33 +0300)]
recipes-graphics/wayland/weston_8.0_aglcore: Remove unneeded patch
With the last SRCREV bump for agl-compositor we no longer need the patch
that made a private function, public.
Bug-AGL: SPEC-3641
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I3f58f88b8b33fad5eff1812112acef00306f1cb5
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26279
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Marius Vlad [Tue, 20 Apr 2021 13:57:53 +0000 (16:57 +0300)]
recipes-graphics/wayland/agl-compositor: SRCREV bump
The major change in this bump, besides some smaller fixes, is that the
compositor would send to the client (before attaching a buffer to a surface)
the initial surface dimensions, thus not needing any resizing code for the
client to handle, making this a nice optimization to have to in.
Obviously, this happens only for regular clients, w/ the client shell,
still required to handle the resizing of its buffers.
With this bump we also remove an external dependency patch (which should
come as a follow-up to this) and increase the compositor version.
In detail the following changes have been added:
-
68d184f9d541a47 meson.build: Do a release update before libweston9 integration
-
483d363b9e724a0 layout: Remove weston_output_damage dependecy
-
e35c7858a788b46 layout: Fix split role sending invalid dimensions
-
80febb3fbcebe88 desktop: Tell clients to use current geometry area from start
-
46e2d5e441dfb9f desktop: Send remove event only if output and app_id is set
-
d85915199c8a321 Notify about application destruction
-
fd860492da6fb07 Allow unregistered applications in rba
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: Iaed23aae27695db51260b7b04e3d9e0a5a053aa2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26278
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Vasyl Vavrychuk [Sat, 27 Mar 2021 20:29:52 +0000 (21:29 +0100)]
aglsetup: Override templateconf.cfg in case of -f, --force.
Overriding this config file was missing for some reason.
Bug-AGL: SPEC-3861
Change-Id: Iddf195615291b166a05bedb5ef0ddf645265e546
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26208
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Fri, 19 Mar 2021 15:38:19 +0000 (16:38 +0100)]
[RCAR] Fix sound on ulcb board
After RCAR BSP 4.7.0, m3ulcb and h3ulcb (without kingfisher layer) does not have audio after BSP Update.
The sound car is named ak4613 now for booth ulcb card and ulcb +kf
card.(no rcarsound name anymore)
Bug-AGL: SPEC-3849
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: Id759de2a0df90cd216106da54870f663ca7adb64
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26189
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Thu, 18 Mar 2021 03:05:06 +0000 (04:05 +0100)]
Mask patch causing crash in lua
The patch CVE-2020-15945.patch applied by meta-oe does
crash the lua ptest in db.lua (segfault).
Mask the patch until a solution is found upstream.
Bug-AGL: SPEC-3828
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I27eeea4a47b653fe13b9f949b3d792602a3c6e1a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26183
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Scott Murray [Mon, 8 Mar 2021 17:59:15 +0000 (12:59 -0500)]
meta-agl-bsp: add pseudo abort workaround for rcar3 builds
Add workaround to avoid pseudo aborts triggered by the rcar3 kernel
module recipes writing to KERNELSRC in do_install, errors are of the
form (from pseudo.log):
path mismatch [27 links]: ino
19366408 db 'NAMELESS FILE' req 'build/tmp/work-shared/h3ulcb/kernel-source/include'.
See the commit messages in poky commits
4e7c211 and
3b7f2c6 and the
wiki page at:
https://wiki.yoctoproject.org/wiki/Pseudo_Abort
for details on the pseudo behavior change. These can potentially be
moved to the recipes in the BSP, or removed if the recipes are changed
to shift the module headers and symbols to their dev packages.
Bug-AGL: SPEC-3840
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ic872e1cec1ccbd37a5a53d146119fa5053b85482
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26147
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Mon, 8 Mar 2021 17:50:34 +0000 (12:50 -0500)]
meta-agl-core: remove rng-tools bbappend
The rng-tools patches are now being applied in the upstream recipe in
dunfell 3.1.6, so the local bbappend and patches can now be dropped.
Bug-AGL: SPEC-3840
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Id431d9e5259fd78d6f36934ed4839ef4aa35ba2b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26146
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Julien Massot <julien.massot@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Mon, 15 Feb 2021 08:46:36 +0000 (09:46 +0100)]
[RCAR] u-boot: move redundant-yyloc-global patch to u-boot-common.inc
gcc10 build issue occurs in both u-boot and u-boot-tools
(From OE-Core rev:
2e128a775a3d51dc1856a35e2f5135d3c156d10e)
Bug-AGL: SPEC-3804
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I7be66b06e99415fa7b6c3a7a2c397d00ee44b4cc
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26052
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Mon, 15 Feb 2021 08:42:50 +0000 (09:42 +0100)]
[RCAR] Update BSP Renesas RCAR gen3 to version 4.7.0
Bug-AGL: [SPEC-3804]
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I2a5c9dce63cd7c681cf9a36cf530e432081e1c6b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26051
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Sun, 14 Feb 2021 21:32:34 +0000 (22:32 +0100)]
Revert "meta-renesas: workaround recipe incompatibilities with YP 3.1.4"
Bug-AGL: SPEC-3804
This reverts commit
8b4612385bbf4cdf523c9b731ed73c7887995372.
Change-Id: I4a70f1cc57bf2265846b3a208b74c46a786ec622
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26050
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Ronan Le Martret [Tue, 16 Feb 2021 21:11:44 +0000 (22:11 +0100)]
Revert "meta-renesas: update gstreamer version workaround"
Bug-AGL: SPEC-3804
This reverts commit
0fcc99e2b74b7e393980c2e3bfe9863b5dbc8ae4.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: Iabc9a6e7c8a2db86411b9b5e788b38d41564d351
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26049
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Mon, 8 Mar 2021 17:33:48 +0000 (12:33 -0500)]
meta-agl-bsp: clean up Raspberry Pi Xen support
Changes:
- Rename bbappend for Xen support to work with 5.4 kernel.
- Drop one of the Xen support patches that no longer applies, as it
seems no longer required due to upstream changes.
- Move Xen kernel configuration fragment use to non-versioned kernel
bbappend to simplify future upgrades.
- Move ENABLE_UART definition to machine template inc files instead
of duplicating it in multiple bbappends. This is more in line with
how upstream indicates it be used.
Note that these changes have been compile tested with the agl-virt-xen
feature, but the resulting image has not yet been tested with Xen.
This is still an improvement, as agl-virt-xen would have silently not
affected kernel configuration previously. As well, some of the
reshuffling done here will simplify the kernel upgrade in the next
branch.
Bug-AGL: SPEC-3841
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Thu, 25 Feb 2021 20:37:18 +0000 (15:37 -0500)]
meta-agl-core: update poky-agl distro configuration
Changes to match current poky:
- Remove SDK_VERSION definition since the one inherited from
poky.conf should be fine
- Replace explicit systemd enabling with use of INIT_MANAGER variable
- Moved some of the DISTRO_FEATURES variables together to improve
readability
- Remove gstreamer1.0* PREFERRED_VERSION overrides, as they no longer
seem required
- Remove PREFERRED_PROVIDER_jpeg as it no longer is required
Note that these are in part cleanup to match poky dunfell, and also
to reduce the amount of changes required to support current upstream
poky master.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I540dd97eef147201446021dbe0bda5289e34a18f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26100
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Wed, 24 Feb 2021 20:21:07 +0000 (15:21 -0500)]
meta-agl-core: update packagegroup-agl-core-boot
Update packagegroup-agl-core-boot to match the current state of
packagegroup-core-boot in upstream poky master. The changes
remove use of some of the global VIRTUAL-RUNTIME variables that are
now assumed to be globally scoped, and replacing the hard-coded
busybox usage with appropriate VIRTUAL-RUNTIME variables.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5d16c44bf78afd2a8b0914c3381f94e7e5382223
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26099
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Tue, 23 Feb 2021 19:28:03 +0000 (14:28 -0500)]
meta-agl-core: fix connman-ncurses compilation
Add patch for connman-ncurses to fix compilation with newer json-c in
poky master.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Id17b2863a04b37981d7f7cb0885365fe1a8418d2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26098
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Wed, 24 Feb 2021 20:53:58 +0000 (15:53 -0500)]
meta-agl-core: remove libsoup bbappend
Remove now libsoup bbappend as it seems no longer necessary with
upstream poky master, and also remove libsoup from the autobuilder
image, as there is no longer any need to test building it.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I01b9fbfbf0d5b40df72f6be88322bbd855335d92
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26097
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Wed, 24 Feb 2021 20:23:49 +0000 (15:23 -0500)]
meta-agl-core: update packagegroup-agl-core-connectivity
Remove dhcp-server from packagegroup-agl-core-connectivity, as it is
no longer available in upstream poky master, and nothing in the AGL
images depends upon it.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ie778a6e7a0d5e19ca694133207acc6e39f3d58c4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26096
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Tue, 23 Feb 2021 19:47:28 +0000 (14:47 -0500)]
meta-agl-core: fix S definition in waltham-transmitter-plugin
Bitbake now warns if the path in the S variable definition has a
trailing '/', remove it.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib1f24e03a0878b895b3bd08d2579b0e7b379a2b2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26095
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Wed, 10 Feb 2021 18:32:25 +0000 (13:32 -0500)]
meta-agl-bsp: Fix agl-refhw-h3 BBMASK definition
Use += with BBMASK definition to avoid over-writing other additions.
Bug-AGL: SPEC-3798
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If6d5850e7dc07de56c2a6737634f0c0935ec2030
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26040
Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
Scott Murray [Wed, 10 Feb 2021 18:23:15 +0000 (13:23 -0500)]
meta-renesas: update gstreamer version workaround
The wildcard bbappends added as a workaround for gstreamer 1.16.3
versus 1.16.2 for the dunfell 3.1.4 upgrade (SPEC-3706) were less
than ideal since they still pointed at the 1.16.2 branch in Renesas'
repositories. They have advised that 1.16.3 support branches are
now available, so update the workaround bbappends to use them, and
change the wildcard usage back to the full version number.
This should hold us until the BSP v4.1.7 update, when these bbappends
can be removed.
Bug-AGL: SPEC-3803
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I56e6699dce8b45f3c5f713958c43b9bbc8af8ec6
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26039
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Marius Vlad [Fri, 5 Feb 2021 12:47:18 +0000 (14:47 +0200)]
agl-compositor: Bump SRCREV
This update is needed to allow unregistered/unknown applications in/to the
RBAModel json to be displayed. By default no application would be allowed. This
can be tweaked by modifying the weston.ini file. By default it is off/not set.
In detail this update includes the following the changes:
-
fd860492da6fb07f Allow unregistered applications in rba
-
47386558dbc95387 Use parameterized constructor of RBAArbitrator
-
79bc7999332d55b7 Update architecture diagram with a small legend
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I6249fd934868b6c064cf9f183e3db5282ffdc2bf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26024
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Thu, 4 Feb 2021 15:22:10 +0000 (10:22 -0500)]
meta-agl-bsp: Add reference hardware GPS support
Add recipe for gpsd configuration for the reference hardware, which
also installs a script plus systemd unit drop-in to handle enabling
and disabling it. The latter is required due to the reference
hardware's reuse of the h3ulcb image, which means the existing
PREFERRED_PROVIDER_virtual/gpsd-conf scheme is not sufficient in
this case.
Bug-AGL: SPEC-3792
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ifaf3b93d06825f7c5c6a8ce2773d93931e47178c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25994
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Code Review / AGL / meta-agl.git / log