Scott Murray [Thu, 31 May 2018 13:25:39 +0000 (13:25 +0000)]
Merge "meta-agl-bsp/meta-rcar-gen3: Correct asound.state" into eel
Ronan Le Martret [Wed, 30 May 2018 11:52:45 +0000 (13:52 +0200)]
Fix kernel .config file configuration
* A missing carriage return at the end of a cfg
will break the kernel .config
Bug-AGL: SPEC-1475
EE-MUST-FIX
Change-Id: Ie0bc472153ae73b41c495161f83acba57d812b9a
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Tom Rini [Tue, 29 May 2018 19:41:55 +0000 (15:41 -0400)]
meta-agl-bsp/meta-rcar-gen3: Correct asound.state
With current BSPs we need to specify a different card name. Furthermore
the old DVC Out value is now too large and needs to be reduced by a
factor of 10, and the default volumes increased slightly instead.
Change-Id: I3cd30054ab569e47e4cb2b0aa479a437e2f03458
Bug-AGL: SPEC-1481
Signed-off-by: Tom Rini <trini@konsulko.com>
Jan-Simon Möller [Thu, 24 May 2018 19:57:29 +0000 (21:57 +0200)]
Bump distro config post release of 5.0.3
Change-Id: Ie9edba00148e7c79d035a828f702449ece6f1cbe
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Yordan Dimitrov [Tue, 22 May 2018 12:41:01 +0000 (13:41 +0100)]
Enable I2C-TINY-USB and LEDS-BLINKM drivers for AGL demonstrator
To extent the demonstrator we need to support an I2C adaptor and RGB LED.
Change-Id: I1816ee9a7acf4699d1639b4954422df9ca8f452e
Signed-off-by: Yordan Dimitrov <y.dimitrov.14@gmail.com>
Jan-Simon Möller [Mon, 21 May 2018 23:38:21 +0000 (01:38 +0200)]
Bump DISTRO_VERSION for 5.0.3 release
Change-Id: If948f3d1c5bde6fad4759a903432c664300b0832
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Martin Kelly [Sat, 27 Jan 2018 01:34:56 +0000 (17:34 -0800)]
bsp: add salvator-x H3 support
The Salvator-X uses the same SoC as the H3 but includes other
peripherals. As a result, it can reuse the same h3ulcb config but needs
a different device tree and kernel config. This is already supported in
meta-rcar-gen3 but needs AGL plumbing, so add it.
There is also an M3 version of the Salvator-X, but I don't have one and
cannot test it. So I've added support only for the H3 version here.
Bug-AGL: SPEC-1376
Change-Id: I64683f4f65dda3fee63e6243f0ba916e568ca245
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Jan-Simon Möller [Fri, 30 Mar 2018 22:49:13 +0000 (00:49 +0200)]
Move DISTRO_VERSION to 5.0.2
To prepare the release.
Change-Id: I6a3d34ae38e4e4f0813733343dd4a7d53bbae850
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Thu, 29 Mar 2018 18:38:51 +0000 (18:38 +0000)]
Merge "setup_mm_packages.sh: handle weird terminals" into eel
Martin Kelly [Fri, 2 Mar 2018 20:48:49 +0000 (12:48 -0800)]
re-enable gobject-introspection
In commit
f9a285987c5c956d445efeea6c60f258534fe57b, we disabled
gobject-introspection due to a build error as part of the Rocko
transition. However, the only build errors were on qemu, which were
caused by not emulating SSE4.2 (see poky commit
5b2b343453e805be013e721d079bc24de946f28b for details).
Emulate SSE4.2 in qemu and re-enable gobject-introspection.
Bug-AGL: SPEC-1355
Change-Id: I073db2c37623bb8ba6b7809ca0c3bba5213001e2
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Martin Kelly [Wed, 31 Jan 2018 22:33:12 +0000 (14:33 -0800)]
setup_mm_packages.sh: handle weird terminals
Currently, setup_mm_packages.sh fails on terminals that won't display
colors (such as my Jenkins CI setup). Tweak the code to handle this case
and display an error message instead of failing.
Change-Id: If18e16ed385af567801a56871542b4eb86f4588d
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Dominig ar Foll Intel Open Source [Wed, 14 Feb 2018 13:56:05 +0000 (14:56 +0100)]
adding Minnow eth driver to allow network boot
Change-Id: I86a0ff336d16be399fc50ca81cd687cbaa4a68fa
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Harunobu Kurokawa [Tue, 23 Jan 2018 07:10:21 +0000 (16:10 +0900)]
meta-agl-bsp/meta-rcar-gen3: Improve AUTOLOAD for kernel module.
These kernel modules are used in the video driver.
In addition, the H.264 transfer from the IVI System to the Cluster
in AGL demo also use the encoder plugin.
For this the driver needs to be loaded before weston.
Bug-AGL: SPEC-1038
Change-Id: If403b7dfa5d3402070f2596ae36a3c013495aa97
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Jan-Simon Möller [Wed, 31 Jan 2018 19:57:10 +0000 (20:57 +0100)]
Post-release changes to poky-agl.conf
Change-Id: I93778f8efdfe9e04a401a091217e50dc1c2daa25
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Tue, 30 Jan 2018 20:52:50 +0000 (20:52 +0000)]
Merge "Prepare 5.0.1 release" into eel
Tom Rini [Tue, 30 Jan 2018 13:18:32 +0000 (08:18 -0500)]
Drop references to image_types_uboot.bbclass
With the sync to poky 2.3.3 various bugfixes of mine have been
backported upstream. At this point in time there is no longer a
image_types_uboot.bbclass file as instead the required logic is now
always part of image_types.bbclass.
Change-Id: Ie762adec19a5f31409d72b2ccfded532b8286c15
Bug-AGL: SPEC-1270
Signed-off-by: Tom Rini <trini@konsulko.com>
Jan-Simon Möller [Tue, 30 Jan 2018 10:46:57 +0000 (11:46 +0100)]
Prepare 5.0.1 release
Change-Id: Ia24156b2ae95b84f55b7fa4c0125787a98f4a955
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Tue, 16 Jan 2018 12:00:28 +0000 (12:00 +0000)]
Merge "Weston crushed by ivi-input-controller" into eel
Tadao Tanikawa [Fri, 12 Jan 2018 20:30:15 +0000 (05:30 +0900)]
Weston crushed by ivi-input-controller
When repeat switching between HomeScreen and WebBrowser
very quickly, sometimes weston crushed because of
segmentation fault of ivi-input-contoller.so.
Change-Id: I408158a98f30640fdab9a843331451b5549cb761
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Tadao Tanikawa [Thu, 11 Jan 2018 13:27:29 +0000 (13:27 +0000)]
Fix user-config.service is started everytime when app launching
Due to miss an option in service configuration of
user-config.service, it is started everytime when application
has been launched.
If the user touches app icon or shortcut many times at very
short intervals, user-config.service would invoked too many
time for very short time, then systemd reject execution and
make an error.
This causes an issues in UI. E.g. missing touch event,
collapse of synchronization of HomeScreen's UI view.
Bug-AGL: SPEC-1246
Change-Id: Ia6c7ecac2f880e61c290d6e3ad27d363e228d5f9
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Jan-Simon Möller [Fri, 5 Jan 2018 10:58:19 +0000 (11:58 +0100)]
Prepare EE 5.0.0 distro config
This change prepares the 5.0.0 release.
Change-Id: I15601e8046f77ad6da6c09f98eb46503174ecaee
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Romain Forlot [Tue, 2 Jan 2018 17:48:57 +0000 (18:48 +0100)]
Disable window decoration and ensure fullscreen
Change-Id: I2c9aad08d58b0da1fb6f362b95472f4a653fd9a3
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Jan-Simon Moeller [Tue, 2 Jan 2018 13:29:09 +0000 (13:29 +0000)]
Merge "Open final merge window for EE" into eel
Jan-Simon Moeller [Tue, 2 Jan 2018 10:43:03 +0000 (10:43 +0000)]
Merge "low-level-can-service: bump to new version" into eel
Jan-Simon Möller [Tue, 2 Jan 2018 10:40:26 +0000 (11:40 +0100)]
Open final merge window for EE
Change-Id: I6972a566395f92634967579e4c8ebd6479f19a81
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Romain Forlot [Fri, 22 Dec 2017 17:42:19 +0000 (18:42 +0100)]
low-level-can-service: bump to new version
docs: bump version to 5.0-EE
Code enhancements mem leaks and uninitialized byte
Initialize struct to avoid unexpected behavior
Change-Id: Ia1c63d76ca69886426fa0d373e719c88710c7a0d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Jan-Simon Moeller [Wed, 27 Dec 2017 13:14:40 +0000 (13:14 +0000)]
Merge "weston-ini-conf: Disable kingfisher's 2nd and 3rd output" into eel
Jan-Simon Moeller [Wed, 27 Dec 2017 12:53:50 +0000 (12:53 +0000)]
Merge "adding copying of microcode.cpio if present" into eel
Harunobu Kurokawa [Fri, 22 Dec 2017 13:18:01 +0000 (22:18 +0900)]
weston-ini-conf: Disable kingfisher's 2nd and 3rd output
Kingfisher has tree display output, currently AGL use
only one output from micro HDMI.
Change-Id: Ife61da4bfd2127a49c50247c26d8a7693960d439
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Dominig ar Foll Intel Open Source [Fri, 22 Dec 2017 01:20:42 +0000 (02:20 +0100)]
adding copying of microcode.cpio if present
Change-Id: Ia1903d6e5906f3353ba1ad1f9c259865bf507330
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Jan-Simon Möller [Fri, 22 Dec 2017 01:13:38 +0000 (02:13 +0100)]
Prepare EE rc5
Change-Id: I3157142b03456987c648af05b60f61641aab6afa
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Thu, 21 Dec 2017 20:48:15 +0000 (20:48 +0000)]
Merge "Adding lua to Host SDK" into eel
Jan-Simon Moeller [Thu, 21 Dec 2017 08:46:01 +0000 (08:46 +0000)]
Merge changes I6716197b,I07fe2d5a,Ia35a6007,I1457c89a,Iaaf3b308 into eel
* changes:
meta-agl-bsp/meta-rcar-gen3: Add u-boot-script-rcar-gen3 to ease boot
meta-rcar-gen3: add si46xx radio tools for KF support
ti-bt: add a systemd unit and enable
meta-rcar-gen3: add WiLink8 tools for KF support
templates: rcar3: add meta-rcar-gen3-adas for KF support
Romain Forlot [Wed, 20 Dec 2017 23:10:34 +0000 (00:10 +0100)]
Adding lua to Host SDK
Bug-AGL: SPEC-1215
Change-Id: I32cb7e3aeb8e4decafb3bf4b76b4ee7e39b10226
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Tom Rini [Wed, 13 Dec 2017 23:18:29 +0000 (18:18 -0500)]
meta-agl-bsp/meta-rcar-gen3: Add u-boot-script-rcar-gen3 to ease boot
Introduce a boot.scr script to handle loading the kernel and device
tree, along with setting up the bootargs.
Change-Id: I6716197bc68c37e72d6203113f055fbc0d84ee37
Bug-AGL: SPEC-1175
Signed-off-by: Tom Rini <trini@konsulko.com>
Matt Porter [Tue, 12 Dec 2017 00:38:41 +0000 (19:38 -0500)]
meta-rcar-gen3: add si46xx radio tools for KF support
Add userspace flashing/init/operational tools and userspace
driver to support the si46xx radio on Kingfisher.
Bug-AGL: SPEC-1175
Change-Id: I07fe2d5a3e19e4c094e3238430a9287c9aa52aff
Signed-off-by: Matt Porter <mporter@konsulko.com>
Matt Porter [Wed, 13 Dec 2017 15:55:51 +0000 (10:55 -0500)]
ti-bt: add a systemd unit and enable
We need to provide a systemd unit for UIM to be started at boot. We
also do not want the blacklist that Cogent has created, so delete that.
Bug-AGL: SPEC-1175
Change-Id: Ia35a6007722d4e42a7a76fe9d8d26b90b073f73b
Signed-off-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Matt Porter [Thu, 7 Dec 2017 20:47:50 +0000 (15:47 -0500)]
meta-rcar-gen3: add WiLink8 tools for KF support
Add WiLink8 firmware and BT daemon to support Kingfisher.
Bug-AGL: SPEC-1175
Change-Id: I1457c89abfa3ba3d6afe25c1e158cbfee8e937ad
Signed-off-by: Matt Porter <mporter@konsulko.com>
Matt Porter [Thu, 7 Dec 2017 20:45:44 +0000 (15:45 -0500)]
templates: rcar3: add meta-rcar-gen3-adas for KF support
Bug-AGL: SPEC-1175
Change-Id: Iaaf3b308eae48be9df87e477c62ff391efa59b50
Signed-off-by: Matt Porter <mporter@konsulko.com>
Matt Porter [Wed, 13 Dec 2017 23:04:28 +0000 (18:04 -0500)]
pulseaudio: disable exit-idle-time in daemon.conf
With bluetooth connected, pulseaudio is segfaulting during
idle shutdown. Implement a workaround to avoid idle shutdown
by disabling the exit idle timer that is on by default.
Bug-AGL: SPEC-1188
Change-Id: Ie5868ed2a89d275973a7aca2555a0216c67d090a
Signed-off-by: Matt Porter <mporter@konsulko.com>
José Bollo [Mon, 18 Dec 2017 14:58:05 +0000 (15:58 +0100)]
af-binder & af-main: use AGL_DEFAULT_REVISION for eel
This commit set to AGL_DEFAULT_REVISION for branch eel products.
At his time, it integrate the switch to the version 5.0.0-EE.
After this commit, the changes in binder and framework
should be tracked by the version info of the product.
Change-Id: I6ce40f472c9dc4961808a276f73605d57573dc55
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12683
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Dominig ar Foll Intel Open Source [Mon, 18 Dec 2017 08:49:40 +0000 (09:49 +0100)]
Adding mkabl to support MRB platforms (non signed kernel) and detection/rejection of configiguration with initrd=microcode.cpio
Change-Id: Iff7cbd34fb8abd0f0860fe183018a2d9a133614e
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12669
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Stephane Desneux [Thu, 30 Nov 2017 17:43:15 +0000 (18:43 +0100)]
4A: don't pull agl-audio-plugin when 4A is enabled
When agl-audio-4a-framework feature is enabled at aglsetup time, 4A audio
is enabled and legacy agl-audio-plugin used with GENIVI AudioManager must
not be pulled in images.
Change-Id: I23ff0ced9eff184718b47219e80f1f51db8b9fb8
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12245
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit
5746146e5a42821fb95d39af36b0e7e07c45b79d)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12601
Romain Forlot [Fri, 1 Dec 2017 11:24:46 +0000 (12:24 +0100)]
Removing qtwebkit to be replaced by qtwebengine
Bug-AGL: SPEC-1159
Change-Id: Ieecc7cc51015dd0b7ce689e90f43fcd17b3eb62d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12495
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Kien Dinh [Mon, 11 Dec 2017 06:21:37 +0000 (15:21 +0900)]
Enabled general Intel bluetooth driver support instead of specific one.
ibt-11-5 is the specific firmware for Joule. The image for IA should be able
to include multiple firmware, including this one.
For having the firmware in the image, please include linux-firmware-ibt by
IMAGE_INSTALL_append = ' linux-firmware-ibt'
Change-Id: I4451dbbf54145df784b763dd3ef924d8a7ac8863
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12511
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tadao Tanikawa [Mon, 11 Dec 2017 10:45:22 +0000 (10:45 +0000)]
A larger value is set as default-id-offset
A lager value of default-id-offset would help debug of
AGL DEMO especially for WindowManager/HomeScreen.
Change-Id: I452985a27f69f24c3879f2aea83bb6fe647f29d1
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12427
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
Reviewed-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tom Rini [Tue, 12 Dec 2017 02:02:54 +0000 (21:02 -0500)]
meta-intel: Ensure we pass the microcode as initrd in wic images
We need to ensure that the microcode is passed to the kernel as an
initrd to allow for application of required updates.
Bug-AGL: SPEC-1173
Change-Id: I37a2ca401df9a9c17cf2d3a60151af639a3aba28
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12453
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Mon, 11 Dec 2017 20:03:57 +0000 (21:03 +0100)]
Eel branch open for final merge window before v5.0.0
Change-Id: I7f1ac72b10974d810b2f7e369ab0434f649c89ce
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12445
Jan-Simon Möller [Sun, 10 Dec 2017 21:29:29 +0000 (22:29 +0100)]
Prepare Electric Eel rc4 release v4.99.4
Change-Id: I35318a08aa96f4c152a91c55f1f5a56163a0615f
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12411
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tom Rini [Mon, 27 Nov 2017 13:13:50 +0000 (08:13 -0500)]
meta-intel: Switch to using WIC images only
The hddimg format has a hard-stop at 4GB sized images. We can trigger
this rather easily at this point under agl-demo-platform-crosssdk. WIC
images do not have any such limitation, so we remove hddimg from the
list of built images. The main impact of this is that whereas before we
would modify the default kernel command line via APPEND in the conf file
we would now modify it via the wks file we create for each platform and
that mkefi-agl.sh is now redundant. These wks files are based on the
systemd one but also reflect the design of mkefi-agl.sh in that they
drop the swap partition. Much of the APPEND commentary is moved to the
wks file and we remove some irrelevant comments as well.
Bug-AGL: SPEC-963
Change-Id: If667e1f946e4b9793b63f6d7f572d56d73e35767
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12327
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Wataru Mizuno [Wed, 6 Dec 2017 12:57:23 +0000 (21:57 +0900)]
ivi-controller: add resize setting suit to surface size
The ivi-controller resizes surface size like desktop usecase.
When window manager switchs the half size window to full size,
resize was not working correctly.
This patch fixs this issue by changing surface source region at
the same timing of destination region is changed.
This patch is not necessary later version of wayland-ivi-extension
2.0 since this resize function has already been implemented by
appropriate manner.
Change-Id: Ib028bbc7d77b92ddfafa680b6247224012d630f3
Signed-off-by: Wataru Mizuno <wmizuno@jp.adit-jv.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12399
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Dominig ar Foll Intel Open Source [Fri, 1 Dec 2017 09:40:31 +0000 (10:40 +0100)]
adding support for .wic .wic.xz as source for image
Change-Id: I94c09c6105ac06a37cedc04c777dd1372015a02d
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12409
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Matt Ranostay [Thu, 7 Dec 2017 23:56:22 +0000 (15:56 -0800)]
lightmediascanner: add ~/Videos to initial media scan
Index users ~/Videos directory on initial systemd service startup.
Bug-AGL: SPEC-1169
Change-Id: I536c85fa811153e980acc489db128dd02251e00d
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12397
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Romain Forlot [Fri, 8 Dec 2017 08:17:37 +0000 (09:17 +0100)]
Fix wrong config.xml file used to build widget
Bug-AGL: SPEC-1162
Change-Id: Ib5896de50a52b4828bd6784f2f1c5b9fae55fca9
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12381
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Leon Anavi [Fri, 1 Dec 2017 17:06:00 +0000 (19:06 +0200)]
linux-renesas_%.bbappend: Fix ath9k_htc.cfg and rtl_sdr.cfg
Files ath9k_htc.cfg and rtl_sdr.cfg are provided
by linux-agl.inc. As of the moment there is no need
linux-renesas_%.bbappend also to provide them and
furthermore this patches fixes the kernel build.
Bug-AGL: SPEC-1152
Change-Id: I29ddac799469e0a3107037bb11918c228d10b5db
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12357
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Tue, 5 Dec 2017 16:45:43 +0000 (17:45 +0100)]
af-binder: Make weak ws-client by default (to be fixed)
The case of unicens service that can be here or not creates
problem to the binding 4a when the service is not here.
This commits makes the requirement of ws-client
socket optional. This unblocks the situation but need to
be fixed later, for example, by introducing an explicit
weak requirement.
Bug-AGL: SPEC-1151
Change-Id: I64864996032510f9540a6d1710cbac6e90889658
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12349
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Romain Forlot [Fri, 1 Dec 2017 13:44:30 +0000 (14:44 +0100)]
XDG-IVI: Load by default id-agent in weston
Bug-AGL: SPEC-1096
Change-Id: Iecfede123503410e1fdfa509a724cbcaf643d92b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12311
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Matt Porter [Thu, 30 Nov 2017 23:01:56 +0000 (18:01 -0500)]
meta-agl-bsp: move usbaudio.cfg to linux-agl.inc
USB audio should be enabled for all AGL BSPs. Move the
usbaudio.cfg from the Renesas BSP bbappend (it's actually
not even used there as the fragment is not being appended)
to linux-agl.inc and append it.
Bug-AGL: SPEC-1148
Change-Id: I219d0d0355a4d57f883086631e07f3d191be2975
Signed-off-by: Matt Porter <mporter@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12281
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Wed, 29 Nov 2017 17:26:44 +0000 (18:26 +0100)]
af-binder: Fix hangup on long messages
Fixes:
- Handle correctly the sending of very long
messages.
Improvements:
- Better handling of sd_event loop
- Allows settings of afb-daemon options by
environment:
AFB_TRACEREQ, AFB_TRACEDITF, AFB_TRACESVC,
AFB_TRACEEVT, AFB_LDPATHS
Bug-AGL: SPEC-1091
Change-Id: I1bf8d52bf3ab8f1c73a524c0030b388570d08da8
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12225
Reviewed-by: José Bollo <jobol@nonadev.net>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Romain Forlot [Thu, 30 Nov 2017 11:06:42 +0000 (12:06 +0100)]
Fix permission label and write verbs call
- Fails write request if CAN signal not writable
- Fix permission label
- Correctly reconstituting entire CAN frame
- Deprecate cmake variables not useful
Mechanism to build 3rdparty external libs isn't unique
and should not be handled by app-templates
- Handle space in project path
Bug-AGL: SPEC-966
Change-Id: I3cf2cef32b55b2f796c154ff88aa23fdf1644a7d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12231
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Stephane Desneux [Tue, 7 Nov 2017 17:44:34 +0000 (18:44 +0100)]
meta-netboot: enhance reference uboot config for R-Car Gen3
The provided config now allows to switch from netboot to sdcard
boot at runtime by changing a uboot variable.
Change-Id: I778f46f65ca007dbdd5ae070e946c04b7277ddeb
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12213
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Kotaro Hashimoto [Thu, 30 Nov 2017 02:10:09 +0000 (11:10 +0900)]
Fix Linux Kernel fragment for netboot
Previous change caused issue of missing nbd.cfg at bitbaking for non-netboot environment.
This patch fix netboot setting.
(*)https://gerrit.automotivelinux.org/gerrit/#/c/12063/
Change-Id: I61a9e2ac9aecc98b6a379c4587a025710aaebfbb
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12217
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tom Rini [Wed, 29 Nov 2017 17:59:11 +0000 (12:59 -0500)]
meta-agl-bsp/meta-rcar-gen3: Add default asound.state file
The m3/h3 platforms have certain mixer settings that must be enabled and
levels set before anything will be heard. Provide a default that sets
this to a comfortable default along with other volumes.
Bug-AGL: SPEC-792
Change-Id: I1b983b75fd580ae39495a47058bb568b7f75a479
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12201
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Wed, 29 Nov 2017 10:15:19 +0000 (11:15 +0100)]
Update eel branch defaults
This change updates the gitreview and default.xml for the
Electric Eel branch.
Change-Id: Ic068b4690bf5aba0cc4e56fa61c1e04f92733287
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12181
Stephane Desneux [Tue, 28 Nov 2017 21:41:59 +0000 (21:41 +0000)]
mxml: remove SECURITY_CFLAGS override
mxml is not neeeded anymore as a dependency of agl-service-unicens
so the override on SECURITY_CLAGS can be removed
Bug-AGL: SPEC-1108
Change-Id: I704fdeed2db07a159a1cd32ebcf6ae93d8702a2b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12171
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Mon, 27 Nov 2017 17:56:29 +0000 (18:56 +0100)]
Merge window for EE rc4 is open
Change-Id: I11fdb68861c74532fa2cd1014195f1585330d981
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12161
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Romain Forlot [Wed, 15 Nov 2017 16:33:16 +0000 (16:33 +0000)]
Added XDG compatibility to ivi-shell
Backported M.Teyfel patch from wayland-devel mailing list:
https://lists.freedesktop.org/archives/wayland-devel/2017-November/035700.html
Upgrade wayland-ivi-extension to v2.0.2 but keep
using 1.1x for now with PREFERRED_VERSION until HMI could use the new
version.
Added Emre Ucan simple-id-agent to review.
Bug-AGL: SPEC-1096
Change-Id: I74c4ae0bf0bf822e27dcbb193dc9f7a13d3e270d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11991
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Nobuhiko Tanibata <nobuhiko_tanibata@denso.co.jp>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Sun, 26 Nov 2017 21:23:09 +0000 (22:23 +0100)]
Prepare for eel rc3 release
Change-Id: I0adcb275bca01ef7e32d6c0d6fdfabdf078e0bfc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12149
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Stephane Desneux [Thu, 23 Nov 2017 13:57:50 +0000 (14:57 +0100)]
aglsetup: exit with error if fragment script fails
Bug-AGL: SPEC-1002
Change-Id: I93407ca24c67b6b7c4e9aa09325fbf78d01f1c64
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12111
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Thu, 16 Nov 2017 08:26:32 +0000 (09:26 +0100)]
Remove obsolete examples
At this time, many demo examples are available
to demonstrate use of AGL framework.
Keeping these obsoletes examples introduces confusion.
Maintaining these examples is possible but not done
from what I see.
In conclusion, removing it is much cleaner.
Change-Id: I29a68eabf48a72d4a681de9b641da72f647ffbac
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12017
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Anton Gerasimov [Wed, 22 Nov 2017 11:01:42 +0000 (12:01 +0100)]
Add sota support for Renesas R-Car M3
Everything for R-Car M3 support is in place, just DISTRO_FEATURES 'sota'
was missing.
Change-Id: Ib22ee4ace894ff5426ba4f06c7ec8bd208cb4e5f
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12091
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Wed, 22 Nov 2017 10:55:59 +0000 (11:55 +0100)]
afm-main: use AGL_BRANCH for naming package
Change-Id: I7ac64017cf21a0a29d6fa60ab12ab260589a1d50
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12089
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Mon, 20 Nov 2017 17:08:29 +0000 (18:08 +0100)]
af-binder-devtools: Align to use app-framework-binder repo
The development tools of af-binder are better provided by
af-binder itself in the repository app-framework-binder.
This is better for support and evolution.
Bug-AGL: SPEC-941
Change-Id: Ib283c36bc6194f793fd61c7844191e3187fe3bed
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12059
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tom Rini [Fri, 3 Nov 2017 19:29:15 +0000 (15:29 -0400)]
Rework Linux Kernel fragment applications
- All kernel recipes must inherit linux-agl.inc
- All kernel recipes for a given version (e.g. 4.9) should include
linux-VER-agl.inc in order to avoid duplication (such as the SMACK
label patch or security fixes)
- We enforce having merge_config.sh be invoked at the end, in order to
make sure fragments will be applied.
- Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is
still enabled.
With all of the above, we fix a number of minor issues as well, such as
platforms manually enabling NBD/RAMDISK for netboot as the previous
logic was not working in all cases.
Bug-AGL: SPEC-946
Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Fri, 17 Nov 2017 05:23:32 +0000 (06:23 +0100)]
Move genskel to af-binder-tools recipes
This change fixes SPEC-941 and the HAL build by providing the needed
afb-genskel for build by recipe and as part of the SDK.
v2: move to af-binder folder and align naming to af-binder-devtools
add nativesdk-af-binder-devtools to packagegroup nativesdk-packagegroup-sdk-host
add af-binder-devtools-native to packagegroup packagegroup-agl-app-framework
v3: move af-binder-devtools-native to aglwgt as DEPENDS as there is no -native package
to add to the packagegroup-agl-app-framework
Bug-AGL: SPEC-941
Change-Id: Iae3c8d958000623b1c84db896307032f5033477d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12033
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
José Bollo [Fri, 17 Nov 2017 16:25:29 +0000 (17:25 +0100)]
af-binder: Fix autolock in protocol
A lock happened when a binding made a synchronous call
in an event callback.
Bug-AGL: SPEC-1091
Change-Id: I33793ff6755c339308a418fbd93b43227ca1cec2
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12041
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Scott Murray [Thu, 16 Nov 2017 03:09:11 +0000 (22:09 -0500)]
mxml: disable SECURITY_CFLAGS
The mxml shared library was failing to link on x86-64, disable the
SECURITY_CFLAGS on it for now until we can contact upstream and get
the underlying issue addressed.
Change-Id: I53578544222294119f4141ccc4dfa28d2737983b
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11999
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Romain Forlot [Tue, 14 Nov 2017 15:47:18 +0000 (15:47 +0000)]
Fix: wrong config.xml used to build widget
Change-Id: I3c5936c4c9b1f8de58ea912482e7b5d8ddc5eedd
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11961
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Mon, 13 Nov 2017 14:38:35 +0000 (15:38 +0100)]
Remove unused and/or obsolete default binding from image
Remove the systematic bindings:
* af-binder-binding-afb-dbus-binding because not used
* af-binder-binding-authlogin because obsolete and not used
Change-Id: I351128c44a4f375cff22ff0a1f631d0a5dfa58b1
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11903
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Yuichi Kusakabe [Tue, 14 Nov 2017 03:51:11 +0000 (12:51 +0900)]
Add Logicool G29 steering wheel kernel config
AGL simple CAN simulator use Logicool G29 steering wheel, shift knob and pedal.
https://gaming.logicool.co.jp/ja-jp/product/g29-driving-force
Change-Id: I4b6ed6a5e1592c6aa4075d7d3e89ec90c006f7dd
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11919
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Mon, 13 Nov 2017 14:34:40 +0000 (15:34 +0100)]
af-binder: Improve monitoring of events
Fix an issue when monitoring events created by local bindings.
Change-Id: If8c4513cacf2c33eccdcd4a9a58178d91095cc41
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11901
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Sat, 11 Nov 2017 23:58:55 +0000 (00:58 +0100)]
af-binder: Bug fixes and improvements
- fix lock error
- fix default token
- improved management of sessions
Change-Id: I9e7518f091da7ceeb1c66a90873a24f82de2dabf
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11873
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Thu, 9 Nov 2017 11:41:57 +0000 (12:41 +0100)]
Bump poky-agl.conf post release
Change-Id: Ib87b6ba6cccd56bb85b3c2086fc10227beaeffbc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11779
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Mihail Grigorov [Tue, 7 Nov 2017 16:11:55 +0000 (18:11 +0200)]
meta-agl-bsp: kernel: remove linux-boundary defconfig from meta-freescale-layer.
Its do not needed anymore here, because we started to using meta-boundary layer
Bug-AGL: SPEC-905
Change-Id: I179ac8747fe24293be89d3138f54589511ed2b63
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11749
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Moeller [Tue, 7 Nov 2017 09:49:08 +0000 (09:49 +0000)]
Revert "Fix FTBS on newer pyro versions due to duplicate userids"
This reverts commit
14a6db75ed0fad7fd55ad3ee239a4b92abfb8754.
Change-Id: I130bcb057ab8e59f7e5dd14256cb6623aee24798
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11729
Reviewed-by: ronan Le Martret <ronan.lemartret@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Ronan Le Martret [Tue, 7 Nov 2017 09:01:14 +0000 (10:01 +0100)]
Remove duplicate user/group definition
* Fix build error
* user must be define only once
* user have default group "users:100"
* Note: At the first Pyro release, the option "--user-group" was
always true (it was an untrack issue) for useradd yocto function.
"user_group = uaargs.user_group is None or uaargs.user_group is True"
and so force to create a group with the same name as the user.
(Because we use a group name and not a gid).
So at first create a custom group for each user solve the issue,
but it's not the good solution.
** This issue was Fix upstream in:
Poky:
7ca04fef1b324b7fc6e8c5bbddcd41617cc5e5c6
Bug-AGL: SPEC-1053
Change-Id: Idfe5f07216741f1cfffdbcc4711d08f66f73bd79
Signed-off-by: Ronan Le Martret <ronan@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11705
Reviewed-by: ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Jan-Simon Möller [Mon, 6 Nov 2017 22:26:23 +0000 (23:26 +0100)]
Fix FTBS on newer pyro versions due to duplicate userids
This change removes the agl-users package from the
packagegroup-agl-core-security.bbappend .
The reason is that for SOTA we have to use predefined userids
to stay consistent across builds.
Newer pyro releases are more picky about duplicate userids
from static files and those being created on-the-fly.
For now we remove the dynamic variant by removing
agl-users from the packagegroup.
Change-Id: I54034361eec344b8130754fadf8c48207321797a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11715
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Jan-Simon Möller [Sun, 5 Nov 2017 15:17:18 +0000 (16:17 +0100)]
Prepare Electric Eel RC2 release
Change-Id: I5e286abc387fa15883ff288093cd5bc91b495ec0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11691
Jan-Simon Möller [Sun, 5 Nov 2017 11:54:08 +0000 (12:54 +0100)]
Allow SRCREV handling through poky-agl.conf
This change simplifies the SRCREV handling by using
- AGL_APP_REVISION and AGL_DEFAULT_REVISION
in recipes.
Also the AGL_BRANCH can be used to switch to release branches.
Bug-AGL: SPEC-864
Change-Id: I9384c85d4f7434416d87359f88c482887ac2ead8
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11685
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
José Bollo [Fri, 3 Nov 2017 12:33:17 +0000 (13:33 +0100)]
af-binder: Bug fixes
* fix a bug in handling of event loop that consummed
100% CPU and reached assertion failures
* fix a file descriptor leak in handling API sockets
on server side
* ensure non interleaved log messages
* fix lack of 'noconcurrency' flag in creation of
dynamic apis
Also allows javascript client to set their "callId"
explicitely.
Change-Id: I28b4f9c2543e3d184b55fc63e0a1c46752450be3
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11677
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Matt Ranostay [Fri, 3 Nov 2017 02:48:41 +0000 (04:48 +0200)]
lightmediascanner: add ~/Music to initial media scan
Index users ~/Music directory on initial systemd service
startup.
Bug-AGL: SPEC-1029
Change-Id: Iae20eaaa33fa3c6c13eeb57d1694eef9cfa8866d
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11667
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Mihail Grigorov [Thu, 26 Oct 2017 14:23:40 +0000 (17:23 +0300)]
meta-agl-bsp: templates: update of nitrogen6x machine template
Bug-AGL: SPEC-905
Change-Id: I959a9f8d085b0fb247998790191c3dcf2e4e34fa
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11567
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Mihail Grigorov [Thu, 26 Oct 2017 15:02:56 +0000 (18:02 +0300)]
imx6qsabrelite starts to using 'meta-boundary' layer
a) Adding 'meta-boundary' to bblayers.conf.
b) Prevent of build errors from missing bb files (firefox, chromium),
with help of BBMASK variable.
Bug-AGL: SPEC-905
Change-Id: Id0b823d4f0e8977206dbd22684e0d2cf9e88465f
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11569
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Mihail Grigorov [Thu, 26 Oct 2017 11:22:47 +0000 (14:22 +0300)]
meta-agl-bsp: imx6qsabrelite: Switch to WIC image
To produce a bootable WIC image, we needs to make some
changes in 6x_bootscript for compatibility with WIC and
SDCARD images.
Because in case of WIC, we have one partition, and the kernel
files are located in /boot directory.
In case of SDCARD image, kernel files are in root directory of
first partition.
Bug-AGL: SPEC-899
Change-Id: Ie4b26a703cc468ff8c8405e957aacc2973ee289a
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11571
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Tom Rini [Wed, 25 Oct 2017 12:13:04 +0000 (08:13 -0400)]
python-wand: Add patch to ensure our built ImageMagick is used
It can be slightly tricky to build a copy of python-wand that will also
function. A problem is that without additional logic (MAGICK_HOME), the
python code will not look outside of system paths for a copy of the
imagemagick library. However, even with this path added to the search
list, the code will still try a 'naked' load of the library it wants.
This can result in a visible failure if you have a new enough
imagemagic-6 installed (such as 6.9.7) as the date string checking logic
will fail. Work around these problems by setting MAGICK_HOME globally
to the correct location and patch the api code to look for the form of
imagemagick that we build first, rather than last, so that we are going
to first search for what we know we built.
Bug-AGL: SPEC-984
Backport: https://lists.linaro.org/pipermail/openembedded/2017-October/000102.html
Change-Id: I9f0e3e64ab4601845e4f336aa81ce7c3d01ff7b7
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11587
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tom Rini [Tue, 24 Oct 2017 14:38:42 +0000 (10:38 -0400)]
meta-agl-bsp/meta-rcar-gen3: Import imagemagick_6.9.2.bb
In order for python-wand to function, it must have ImageMagick 6.9.2
available. Import this recipe from meta-linaro.
Bug-AGL: SPEC-984
Backport: https://git.linaro.org/openembedded/meta-linaro.git/commit/?h=pyro&id=
74dacb34c13d1c85fe4627a890b9c04940f9ffeb
Change-Id: I6ddda052213d41ce3de115a4a3e5cf65afeaf5ee
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11585
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
zheng_wenlong [Fri, 27 Oct 2017 04:55:01 +0000 (13:55 +0900)]
Add joystick.cfg for usb joystick and steering-wheel kernel configure
Add joystick.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
Related commit:
https://gerrit.automotivelinux.org/gerrit/#/c/10463/
Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Romain Forlot [Fri, 13 Oct 2017 17:20:19 +0000 (17:20 +0000)]
Update low-can service
Updated docs
Write on CAN bus fixed
New verbs that list supported CAN signals and retrieve current value of
a signal
Updated app-template submodules
Change-Id: Ibac813266bdc1cac832daaeb93b26d4088e21764
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11297
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
José Bollo [Mon, 23 Oct 2017 12:31:10 +0000 (14:31 +0200)]
af-binder: Extend maxlength of websocket messages
The default maxlength of 65000 bytes is too limited.
This commit extends the maxlength to
1048500 bytes.
Also includes minor improvements and fixes.
Bug-AGL: SPEC-981
Change-Id: Ic891ae90bbdd5ec94310bfc3aea1fb30f6e80077
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11491
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Romain Forlot [Tue, 17 Oct 2017 10:34:28 +0000 (10:34 +0000)]
Invert make/autobuild order
because make all create a package dir then 'make package' doesn't fails
so autobuild isn't executed. Invert the order keep compability and give
priority to the autobuild script.
Needed for gerrit review: 11297 about low-can service update
Change-Id: I54e1da827ec7254afbab7de5498421914832f460
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11359
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Code Review / AGL / meta-agl.git / log