+++ /dev/null
-{
- "description": "Layer mapping",
- "mappings": [
- {
- "name": "BackGroundLayer",
- "role" : "map|radio|music|video",
- "type" : "stack",
- "id_range_begin": 0,
- "id_range_end": 0,
- "comment": "Work Around: This is evacuation layer that not stopping event loop"
- },
- {
- "name": "FarHomeScreen",
- "role": "",
- "type": "stack",
- "id_range_begin": 100,
- "id_range_end": 199,
- "comment": "FarHomeScreen is the part of HomeScreen. The z order of this layer is lower than NearHomeScreen"
- },
- {
- "name": "Apps",
- "role": "music|video|browser|radio|phone|map|navigation|hvac|settings|dashboard|poi|mixer|sdl|launcher|receiver|tachometer|fallback",
- "type": "tile",
- "id_range_begin": 1000,
- "id_range_end": 2999,
- "comment": "Range of IDs that will always be placed on layer 1001"
- },
- {
- "name": "NearHomeScreen",
- "role": "homescreen",
- "type": "tile",
- "id_range_begin": 3000,
- "id_range_end": 3000,
- "comment": "TOYOTA special software keyboard"
- },
- {
- "name": "Application Popup Layer",
- "role": "popup*",
- "type": "stack",
- "id_range_begin": 4000,
- "id_range_end": 4999,
- "comment": "[T.B.D]This layer is for application popup layer"
- },
- {
- "name": "Restriction",
- "role": "restriction",
- "type": "stack",
- "id_range_begin": 5000,
- "id_range_end": 5999,
- "comment": "This layer is for restriction notification. This is used by restriction role"
- },
- {
- "name": "OnScreen",
- "role": "^on_screen*",
- "type": "stack",
- "id_range_begin": 6000,
- "id_range_end": 6999,
- "comment": "Range of IDs that will always be placed on the OnScreen layer, that gets a very high 'dummy' id of 9999"
- },
- {
- "name": "Remote",
- "role": "tbtnavi",
- "type": "stack",
- "id_range_begin": 9000,
- "id_range_end": 9999,
- "comment": "Range of IDs that will always be placed on the OnScreen layer, that gets a very high 'dummy' id of 9999"
- }
- ]
-}
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<protocol name="ivi_wm">
-
- <copyright>
- Copyright (C) 2017 Advanced Driver Information Technology Joint Venture GmbH
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.
- </copyright>
-
- <interface name="ivi_wm_screen" version="1">
- <description summary="controller interface to screen in ivi compositor"/>
-
- <request name="destroy" type="destructor">
- <description summary="destroy ivi_wm_screen">
- Request to destroy the ivi_wm_screen.
- </description>
- </request>
-
- <request name="clear">
- <description summary="remove all layers from screen render order">
- A screen has no content assigned to itself, it is a container for layers.
- This request removes all layers from the screen render order.
- Note: the layers are not destroyed, they are just no longer contained by
- the screen.
- </description>
- </request>
-
- <request name="add_layer">
- <description summary="add a layer to screen render order at nearest z-position">
- A screen has no content assigned to itself, it is a container for layers.
- This request adds a layers to the topmost position of the screen render order.
- The added layer will cover all other layers of the screen.
- </description>
- <arg name="layer_id" type="uint"/>
- </request>
-
- <request name="remove_layer">
- <description summary="remove a layer to screen render order">
- A screen has no content assigned to itself, it is a container for layers.
- This request removes a layer.
- </description>
- <arg name="layer_id" type="uint"/>
- </request>
-
- <request name="screenshot">
- <description summary="take screenshot of screen">
- An ivi_screenshot object is created which will receive the screenshot
- data of the specified output.
- </description>
- <arg name="screenshot" type="new_id" interface="ivi_screenshot"/>
- </request>
-
- <request name="get">
- <description summary="get a parameter of a screen in ivi compositor">
- After this request, compositor sends the requested parameter.
- </description>
- <arg name="param" type="int"/>
- </request>
-
- <event name="screen_id">
- <description summary="advertise server side id of the ivi-screen">
- Sent immediately after creating the ivi_wm_screen object.
- </description>
- <arg name="id" type="uint"/>
- </event>
-
- <event name="layer_added">
- <description summary="update render order of the screen">
- A layer is added to the render order lisf of the screen
- </description>
- <arg name="layer_id" type="uint"/>
- </event>
-
- <event name="connector_name">
- <description summary="advertise connector name of the corresponding output">
- Sent immediately after creating the ivi_wm_screen object.
- </description>
- <arg name="process_name" type="string"/>
- </event>
-
- <enum name="error">
- <entry name="no_layer" value="0"
- summary="the layer with given id does not exist"/>
- <entry name="no_screen" value="1"
- summary="the output is already destroyed"/>
- <entry name="bad_param" value="2"
- summary="the given parameter is not valid"/>
- </enum>
-
- <event name="error">
- <description summary="error event">
- The error event is sent out when an error has occurred.
- </description>
- <arg name="error" type="uint" summary="error code"/>
- <arg name="message" type="string" summary="error description"/>
- </event>
- </interface>
-
- <interface name="ivi_screenshot" version="1">
- <description summary="screenshot of an output or a surface">
- An ivi_screenshot object receives a single "done" or "error" event.
- The server will destroy this resource after the event has been send,
- so the client shall then destroy its proxy too.
- </description>
-
- <event name="done">
- <description summary="screenshot finished">
- This event contains a filedescriptor for a file with raw image data.
- Furthermore size, stride, format and timestamp of screenshot are
- provided.
- </description>
- <arg name="fd" type="fd" summary="fd for file containing image data"/>
- <arg name="width" type="int" summary="image width in pixels"/>
- <arg name="height" type="int" summary="image height in pixels"/>
- <arg name="stride" type="int" summary="number of bytes per pixel row"/>
- <arg name="format" type="uint" summary="image format of type wl_shm.format"/>
- <arg name="timestamp" type="uint" summary="timestamp in milliseconds"/>
- </event>
-
- <enum name="error">
- <entry name="io_error" value="0"
- summary="screenshot file could not be created"/>
- <entry name="not_supported" value="1"
- summary="screenshot can not be read"/>
- <entry name="no_output" value="2"
- summary="output has been destroyed"/>
- <entry name="no_surface" value="3"
- summary="surface has been destroyed"/>
- <entry name="no_content" value="4"
- summary="surface has no content"/>
- </enum>
-
- <event name="error">
- <description summary="error event">
- The error event is sent when the screenshot could not be created.
- </description>
- <arg name="error" type="uint" enum="error" summary="error code"/>
- <arg name="message" type="string" summary="error description"/>
- </event>
- </interface>
-
- <interface name="ivi_wm" version="1">
- <description summary="interface for ivi managers to use ivi compositor features"/>
-
- <request name="commit_changes">
- <description summary="commit all changes requested by client">
- All requests are not applied directly to scene object, so a controller
- can set different properties and apply the changes all at once.
- Note: there's an exception to this. Creation and destruction of
- scene objects is executed immediately.
- </description>
- </request>
-
- <request name="create_screen">
- <description summary="create a screen in ivi-compositor">
- Ask the ivi-wm to create a ivi-screen for given wl_output.
- </description>
- <arg name="output" type="object" interface="wl_output"/>
- <arg name="id" type="new_id" interface="ivi_wm_screen" summary="the new ivi-screen"/>
- </request>
-
- <request name="set_surface_visibility">
- <description summary="set the visibility of a surface in ivi compositor">
- If visibility argument is 0, the surface in the ivi compositor is set to invisible.
- If visibility argument is not 0, the surface in the ivi compositor is set to visible.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="visibility" type="uint"/>
- </request>
-
- <request name="set_layer_visibility">
- <description summary="set visibility of layer in ivi compositor">
- If visibility argument is 0, the layer in the ivi compositor is set to invisible.
- If visibility argument is not 0, the layer in the ivi compositor is set to visible.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="visibility" type="uint"/>
- </request>
-
- <request name="set_surface_opacity">
- <description summary="set the opacity of a surface in ivi compositor">
- The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="opacity" type="fixed"/>
- </request>
-
- <request name="set_layer_opacity">
- <description summary="set opacity of layer in ivi compositor">
- The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="opacity" type="fixed"/>
- </request>
-
- <request name="set_surface_source_rectangle">
- <description summary="set the scanout area of a surface in ivi compositor">
- The source rectangle defines the part of the surface content, that is used for
- compositing the surface. It can be used, if valid content of the surface is smaller
- than the surface. Effectively it can be used to zoom the content of the surface.
- If a parameter is less than 0, that value is not changed.
- x: horizontal start position of scanout area within the surface
- y: vertical start position of scanout area within the surface
- width: width of scanout area within the surface
- height: height of scanout area within the surface
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </request>
-
- <request name="set_layer_source_rectangle">
- <description summary="set the scanout area of a layer in ivi compositor">
- The source rectangle defines the part of the layer content, that is used for
- compositing the screen. It can be used, if valid content of the layer is smaller
- than the layer. Effectively it can be used to zoom the content of the layer.
- If a parameter is less than 0, that value is not changed.
- x: horizontal start position of scanout area within the layer
- y: vertical start position of scanout area within the layer
- width: width of scanout area within the layer
- height: height of scanout area within the layer
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </request>
-
- <request name="set_surface_destination_rectangle">
- <description summary="Set the destination area of a surface within a layer">
- The destination rectangle defines the position and size of a surface on a layer.
- The surface will be scaled to this rectangle for rendering.
- If a parameter is less than 0, that value is not changed.
- x: horizontal start position of surface within the layer
- y: vertical start position of surface within the layer
- width : width of surface within the layer
- height: height of surface within the layer
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </request>
-
- <request name="set_layer_destination_rectangle">
- <description summary="Set the destination area of a layer within a screen">
- The destination rectangle defines the position and size of a layer on a screen.
- The layer will be scaled to this rectangle for rendering.
- If a parameter is less than 0, that value is not changed.
- x: horizontal start position of layer within the screen
- y: vertical start position of layer within the screen
- width : width of surface within the screen
- height: height of surface within the screen
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </request>
-
- <enum name="sync">
- <description summary="sync request states">
- </description>
- <entry name="add" value="0"/>
- <entry name="remove" value="1"/>
- </enum>
-
- <request name="surface_sync">
- <description summary="request to synchronize of a surface in ivi compositor">
- After this request, compositor sends the properties of the surface.
- If sync_state argument is 0, compositor sends the properties continously.
- If sync_state argument is not 0, compositor stops sending the properties
- continously.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="sync_state" type="int"/>
- </request>
-
- <request name="layer_sync">
- <description summary="request to synchronize of a layer in ivi compositor">
- After this request, compositor sends the properties of the layer.
- If sync_state argument is 0, compositor sends the properties continously.
- If sync_state argument is not 0, compositor stops sending the properties
- continously.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="sync_state" type="int"/>
- </request>
-
- <enum name="param" bitfield="true">
- <description summary="parameter types">
- The HMI controller can request different types of parameters of an
- ivi-object.
- </description>
- <entry name="opacity" value="1"/>
- <entry name="visibility" value="2"/>
- <entry name="size" value="4"/>
- <entry name="render_order" value="8"/>
- </enum>
-
- <request name="surface_get">
- <description summary="get a parameter of an ivi_layout_surface in ivi compositor">
- After this request, compositor sends the requested parameter.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="param" type="int"/>
- </request>
-
- <request name="layer_get">
- <description summary="get a parameter of an ivi_layout_layer in ivi compositor">
- After this request, compositor sends the requested parameter.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="param" type="int"/>
- </request>
-
- <request name="surface_screenshot">
- <description summary="take screenshot of surface">
- An ivi_screenshot object is created which will receive an image of the
- buffer currently attached to the surface with the given id. If there
- is no surface with such name the server will respond with an
- ivi_screenshot.error event.
- </description>
- <arg name="screenshot" type="new_id" interface="ivi_screenshot"/>
- <arg name="surface_id" type="uint"/>
- </request>
-
- <enum name="surface_type">
- <description summary="hint for the compositor">
- If a surface is restricted type, visible contents of the surface is strictly
- controlled by the compositor. Its content is not allowed to be go out of
- its destination region. If the application resizes its buffers or uses
- wp_viewporter protocol to scale its contents, the old destination region
- would causes visible glitches.
- To avoid these issues, the controller process mark a surface as desktop
- compatible. Source and destination regions of a desktop compatible
- surface will be modified accordingly,when application sends a request
- for resizing or scaling its contents. Therefore, applications contents
- will be drawn according to application's wishes.
- On the other hand, source and destination regions will be strictly
- enforced, when the surface's type is restricted. The default type for
- a surface is ivi.
- </description>
- <entry name="restricted" value="0" summary="strictly controlled"/>
- <entry name="desktop" value="1" summary="free to resize and scale"/>
- </enum>
-
- <request name="set_surface_type">
- <description summary="request to set a type for the surface in ivi compositor">
- After this request, compositor changes the type of the surface.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="type" type="int"/>
- </request>
-
- <request name="layer_clear">
- <description summary="remove all surfaces from layer render order">
- A layer has no content assigned to itself, it is a container for surfaces.
- This request removes all surfaces from the layer render order.
- </description>
- <arg name="layer_id" type="uint"/>
- </request>
-
- <request name="layer_add_surface">
- <description summary="add a surface to layer render order at nearest z-position">
- A layer has no content assigned to itself, it is a container for surfaces.
- This request adds a surface to the topmost position of the layer render order.
- The added surface will cover all other surfaces of the layer.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="surface_id" type="uint"/>
- </request>
-
- <request name="layer_remove_surface">
- <description summary="remove a surface from layer render order">
- A layer has no content assigned to itself, it is a container for surfaces.
- This request removes one surfaces from the layer render order.
- Note: the surface is not destroyed, it is just no longer contained by
- the layer.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="surface_id" type="uint"/>
- </request>
-
- <request name="create_layout_layer">
- <description summary="create an ivi_layout_layer in ivi compositor">
- After this request, compositor creates an ivi_layout_layer
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </request>
-
- <request name="destroy_layout_layer">
- <description summary="destroy an ivi_layout_layer in ivi compositor">
- After this request, compositor destroyes an existing ivi_layout_layer.
- </description>
- <arg name="layer_id" type="uint"/>
- </request>
-
- <event name="surface_visibility">
- <description summary="the visibility of the surface in ivi compositor has changed">
- The new visibility state is provided in argument visibility.
- If visibility is 0, the surface has become invisible.
- If visibility is not 0, the surface has become visible.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="visibility" type="int"/>
- </event>
-
- <event name="layer_visibility">
- <description summary="the visibility of the layer in ivi compositor has changed">
- The new visibility state is provided in argument visibility.
- If visibility is 0, the layer has become invisible.
- If visibility is not 0, the layer has become visible.
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="visibility" type="int"/>
- </event>
-
- <event name="surface_opacity">
- <description summary="the opacity of surface in ivi compositor has changed">
- The new opacity state is provided in argument opacity.
- The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="opacity" type="fixed"/>
- </event>
-
- <event name="layer_opacity">
- <description summary="the opacity of layer in ivi compositor has changed">
- The new opacity state is provided in argument opacity.
- The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="opacity" type="fixed"/>
- </event>
-
- <event name="surface_source_rectangle">
- <description summary="the source rectangle of surface in ivi compositor has changed">
- The scanout region of the surface content has changed.
- The new values for source rectangle are provided by
- x: new horizontal start position of scanout area within the surface
- y: new vertical start position of scanout area within the surface
- width: new width of scanout area within the surface
- height: new height of scanout area within the surface
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </event>
-
- <event name="layer_source_rectangle">
- <description summary="the source rectangle of layer in ivi compositor has changed">
- The scanout region of the layer content has changed.
- The new values for source rectangle are provided by
- x: new horizontal start position of scanout area within the layer
- y: new vertical start position of scanout area within the layer
- width: new width of scanout area within the layer
- height: new height of scanout area within the layer
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </event>
-
- <event name="surface_destination_rectangle">
- <description summary="the destination rectangle of surface in ivi compositor has changed">
- The new values for source rectangle are provided by
- x: new horizontal start position of surface within the layer
- y: new vertical start position of surface within the layer
- width : new width of surface within the layer
- height: new height of surface within the layer
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </event>
-
- <event name="layer_destination_rectangle">
- <description summary="the destination rectangle of layer in ivi compositor has changed">
- The new values for source rectangle are provided by
- x: new horizontal start position of layer within the screen
- y: new vertical start position of layer within the screen
- width : new width of layer within the screen
- height: new height of layer within the screen
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </event>
-
- <event name="surface_created">
- <description summary="ivi_layout_surface was created"/>
- <arg name="surface_id" type="uint"/>
- </event>
-
- <event name="layer_created">
- <description summary="ivi_layout_layer was created"/>
- <arg name="layer_id" type="uint"/>
- </event>
-
- <event name="surface_destroyed">
- <description summary="ivi_layout_surface was destroyed"/>
- <arg name="surface_id" type="uint"/>
- </event>
-
- <event name="layer_destroyed">
- <description summary="ivi_layout_layer was destroyed"/>
- <arg name="layer_id" type="uint"/>
- </event>
-
- <enum name="surface_error">
- <entry name="no_surface" value="0"
- summary="the surface with given id does not exist"/>
- <entry name="bad_param" value="1"
- summary="the given parameter is not valid"/>
- <entry name="not_supported" value="2"
- summary="the request is not supported"/>
- </enum>
-
- <event name="surface_error">
- <description summary="error event">
- The error event is sent out when an error has occurred.
- </description>
- <arg name="object_id" type="uint" summary="id of a layer or surface"/>
- <arg name="error" type="uint" summary="error code"/>
- <arg name="message" type="string" summary="error description"/>
- </event>
-
- <enum name="layer_error">
- <entry name="no_surface" value="0"
- summary="the surface with given id does not exist"/>
- <entry name="no_layer" value="1"
- summary="the layer with given id does not exist"/>
- <entry name="bad_param" value="2"
- summary="the given parameter is not valid"/>
- </enum>
-
- <event name="layer_error">
- <description summary="error event">
- The error event is sent out when an error has occurred.
- </description>
- <arg name="object_id" type="uint" summary="id of a layer or surface"/>
- <arg name="error" type="uint" summary="error code"/>
- <arg name="message" type="string" summary="error description"/>
- </event>
-
- <event name="surface_size">
- <description summary="the surface size in ivi compositor has changed">
- The client providing content for this surface modified size of the surface.
- The modified surface size is provided by arguments width and height.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- </event>
-
- <event name="surface_stats">
- <description summary="receive updated statistics for surface in ivi compositor">
- The information contained in this event is essential for monitoring, debugging,
- logging and tracing support in IVI systems.
- </description>
- <arg name="surface_id" type="uint"/>
- <arg name="frame_count" type="uint"/>
- <arg name="pid" type="uint"/>
- </event>
-
- <event name="layer_surface_added">
- <description summary="update render order of the layer">
- A surface is added to the render order of the layer
- </description>
- <arg name="layer_id" type="uint"/>
- <arg name="surface_id" type="uint"/>
- </event>
- </interface>
-
-</protocol>
-
+++ /dev/null
-/*
- * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef TMCAGLWM_CONTROLLER_HOOKS_HPP
-#define TMCAGLWM_CONTROLLER_HOOKS_HPP
-
-#include <cstdint>
-
-#include <functional>
-
-namespace wm
-{
-
-class WindowManager;
-
-struct controller_hooks
-{
- WindowManager *wmgr;
-
- void surface_created(uint32_t surface_id);
- void surface_removed(uint32_t surface_id);
- void surface_visibility(uint32_t surface_id, uint32_t v);
- void surface_destination_rectangle(uint32_t surface_id, uint32_t x, uint32_t y, uint32_t w, uint32_t h);
- void surface_properties(uint32_t surface_id, uint32_t pid);
-};
-
-} // namespace wm
-
-#endif // TMCAGLWM_CONTROLLER_HOOKS_HPP
+++ /dev/null
-/*
- * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <regex>
-
-#include "layers.hpp"
-#include "json_helper.hpp"
-#include "util.hpp"
-
-namespace wm
-{
-
-using json = nlohmann::json;
-
-layer::layer(nlohmann::json const &j)
-{
- this->role = j["role"];
- this->name = j["name"];
- this->layer_id = j["layer_id"];
-
- // Init flag of normal layout only
- this->is_normal_layout_only = true;
-
- auto split_layouts = j.find("split_layouts");
- if (split_layouts != j.end())
- {
-
- // Clear flag of normal layout only
- this->is_normal_layout_only = false;
-
- auto &sls = j["split_layouts"];
- // this->layouts.reserve(sls.size());
- std::transform(std::cbegin(sls), std::cend(sls),
- std::back_inserter(this->layouts), [this](json const &sl) {
- struct split_layout l
- {
- sl["name"], sl["main_match"], sl["sub_match"]
- };
- HMI_DEBUG("wm",
- "layer %d add split_layout \"%s\" (main: \"%s\") (sub: "
- "\"%s\")",
- this->layer_id,
- l.name.c_str(), l.main_match.c_str(),
- l.sub_match.c_str());
- return l;
- });
- }
- HMI_DEBUG("layer_id:%d is_normal_layout_only:%d\n",
- this->layer_id, this->is_normal_layout_only);
-}
-
-struct result<struct layer_map> to_layer_map(nlohmann::json const &j)
-{
- try
- {
- layer_map stl{};
- auto m = j["mappings"];
-
- std::transform(std::cbegin(m), std::cend(m),
- std::inserter(stl.mapping, stl.mapping.end()),
- [](nlohmann::json const &j) {
- return std::pair<int, struct layer>(
- j.value("layer_id", -1), layer(j));
- });
-
- // TODO: add sanity checks here?
- // * check for double IDs
- // * check for double names/roles
-
- stl.layers.reserve(m.size());
- std::transform(std::cbegin(stl.mapping), std::cend(stl.mapping),
- std::back_inserter(stl.layers),
- [&stl](std::pair<int, struct layer> const &k) {
- stl.roles.emplace_back(
- std::make_pair(k.second.role, k.second.layer_id));
- return unsigned(k.second.layer_id);
- });
-
- std::sort(stl.layers.begin(), stl.layers.end());
-
- for (auto i : stl.mapping)
- {
- if (i.second.name.empty())
- {
- return Err<struct layer_map>("Found mapping w/o name");
- }
- if (i.second.layer_id == -1)
- {
- return Err<struct layer_map>("Found invalid/unset IDs in mapping");
- }
- }
-
- auto msi = j.find("main_surface");
- if (msi != j.end())
- {
- stl.main_surface_name = msi->value("surface_role", "");
- stl.main_surface = -1;
- }
-
- return Ok(stl);
- }
- catch (std::exception &e)
- {
- return Err<struct layer_map>(e.what());
- }
-}
-
-optional<int>
-layer_map::get_layer_id(int surface_id)
-{
- auto i = this->surfaces.find(surface_id);
- if (i != this->surfaces.end())
- {
- return optional<int>(i->second);
- }
- return nullopt;
-}
-
-optional<int> layer_map::get_layer_id(std::string const &role)
-{
- for (auto const &r : this->roles)
- {
- auto re = std::regex(r.first);
- if (std::regex_match(role, re))
- {
- HMI_DEBUG("role %s matches layer %d", role.c_str(), r.second);
- return optional<int>(r.second);
- }
- }
- HMI_DEBUG("role %s does NOT match any layer", role.c_str());
- return nullopt;
-}
-
-json layer::to_json() const
-{
- auto is_full = this->rect == compositor::full_rect;
-
- json r{};
- if (is_full)
- {
- r = {{"type", "full"}};
- }
- else
- {
- r = {{"type", "rect"},
- {"rect",
- {{"x", this->rect.x},
- {"y", this->rect.y},
- {"width", this->rect.w},
- {"height", this->rect.h}}}};
- }
-
- return {
- {"name", this->name},
- {"role", this->role},
- {"layer_id", this->layer_id},
- {"area", r},
- };
-}
-
-json layer_map::to_json() const
-{
- json j{};
- for (auto const &i : this->mapping)
- {
- j.push_back(i.second.to_json());
- }
- return j;
-}
-
-void layer_map::setupArea(double scaling)
-{
- compositor::rect rct;
-
- rct = this->area2size["normal.full"];
- this->area2size["normalfull"] = rct;
- this->area2size["normal"] = rct;
-
- for (auto &i : this->area2size)
- {
- i.second.x = static_cast<int>(scaling * i.second.x + 0.5);
- i.second.y = static_cast<int>(scaling * i.second.y + 0.5);
- i.second.w = static_cast<int>(scaling * i.second.w + 0.5);
- i.second.h = static_cast<int>(scaling * i.second.h + 0.5);
-
- HMI_DEBUG("wm:lm", "area:%s size(after) : x:%d y:%d w:%d h:%d",
- i.first.c_str(), i.second.x, i.second.y, i.second.w, i.second.h);
- }
-}
-
-compositor::rect layer_map::getAreaSize(const std::string &area)
-{
- return area2size[area];
-}
-
-int layer_map::loadAreaDb()
-{
- HMI_DEBUG("wm:lm", "Call");
-
- // Get afm application installed dir
- char const *afm_app_install_dir = getenv("AFM_APP_INSTALL_DIR");
- HMI_DEBUG("wm:lm", "afm_app_install_dir:%s", afm_app_install_dir);
-
- std::string file_name;
- if (!afm_app_install_dir)
- {
- HMI_ERROR("wm:lm", "AFM_APP_INSTALL_DIR is not defined");
- }
- else
- {
- file_name = std::string(afm_app_install_dir) + std::string("/etc/areas.db");
- }
-
- // Load area.db
- json_object *json_obj;
- int ret = jh::inputJsonFilie(file_name.c_str(), &json_obj);
- if (0 > ret)
- {
- HMI_DEBUG("wm:lm", "Could not open area.db, so use default area information");
- json_obj = json_tokener_parse(kDefaultAreaDb);
- }
- HMI_DEBUG("wm:lm", "json_obj dump:%s", json_object_get_string(json_obj));
-
- // Perse areas
- HMI_DEBUG("wm:lm", "Perse areas");
- json_object *json_cfg;
- if (!json_object_object_get_ex(json_obj, "areas", &json_cfg))
- {
- HMI_ERROR("wm:lm", "Parse Error!!");
- return -1;
- }
-
- int len = json_object_array_length(json_cfg);
- HMI_DEBUG("wm:lm", "json_cfg len:%d", len);
- HMI_DEBUG("wm:lm", "json_cfg dump:%s", json_object_get_string(json_cfg));
-
- const char *area;
- for (int i = 0; i < len; i++)
- {
- json_object *json_tmp = json_object_array_get_idx(json_cfg, i);
- HMI_DEBUG("wm:lm", "> json_tmp dump:%s", json_object_get_string(json_tmp));
-
- area = jh::getStringFromJson(json_tmp, "name");
- if (nullptr == area)
- {
- HMI_ERROR("wm:lm", "Parse Error!!");
- return -1;
- }
- HMI_DEBUG("wm:lm", "> area:%s", area);
-
- json_object *json_rect;
- if (!json_object_object_get_ex(json_tmp, "rect", &json_rect))
- {
- HMI_ERROR("wm:lm", "Parse Error!!");
- return -1;
- }
- HMI_DEBUG("wm:lm", "> json_rect dump:%s", json_object_get_string(json_rect));
-
- compositor::rect area_size;
- area_size.x = jh::getIntFromJson(json_rect, "x");
- area_size.y = jh::getIntFromJson(json_rect, "y");
- area_size.w = jh::getIntFromJson(json_rect, "w");
- area_size.h = jh::getIntFromJson(json_rect, "h");
-
- this->area2size[area] = area_size;
- }
-
- // Check
- for (auto itr = this->area2size.begin();
- itr != this->area2size.end(); ++itr)
- {
- HMI_DEBUG("wm:lm", "area:%s x:%d y:%d w:%d h:%d",
- itr->first.c_str(), itr->second.x, itr->second.y,
- itr->second.w, itr->second.h);
- }
-
- // Release json_object
- json_object_put(json_obj);
-
- return 0;
-}
-
-const char* layer_map::kDefaultAreaDb = "{ \
- \"areas\": [ \
- { \
- \"name\": \"fullscreen\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 0, \
- \"w\": 1080, \
- \"h\": 1920 \
- } \
- }, \
- { \
- \"name\": \"normal.full\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 218, \
- \"w\": 1080, \
- \"h\": 1488 \
- } \
- }, \
- { \
- \"name\": \"split.main\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 218, \
- \"w\": 1080, \
- \"h\": 744 \
- } \
- }, \
- { \
- \"name\": \"split.sub\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 962, \
- \"w\": 1080, \
- \"h\": 744 \
- } \
- }, \
- { \
- \"name\": \"software_keyboard\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 962, \
- \"w\": 1080, \
- \"h\": 744 \
- } \
- }, \
- { \
- \"name\": \"restriction.normal\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 218, \
- \"w\": 1080, \
- \"h\": 1488 \
- } \
- }, \
- { \
- \"name\": \"restriction.split.main\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 218, \
- \"w\": 1080, \
- \"h\": 744 \
- } \
- }, \
- { \
- \"name\": \"restriction.split.sub\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 962, \
- \"w\": 1080, \
- \"h\": 744 \
- } \
- }, \
- { \
- \"name\": \"on_screen\", \
- \"rect\": { \
- \"x\": 0, \
- \"y\": 218, \
- \"w\": 1080, \
- \"h\": 1488 \
- } \
- } \
- ] \
-}";
-
-} // namespace wm
+++ /dev/null
-/*
- * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef TMCAGLWM_LAYERS_H
-#define TMCAGLWM_LAYERS_H
-
-#include <string>
-
-#include "../include/json.hpp"
-#include "layout.hpp"
-#include "result.hpp"
-#include "wayland_ivi_wm.hpp"
-
-namespace wm
-{
-
-struct split_layout
-{
- std::string name;
- std::string main_match;
- std::string sub_match;
-};
-
-struct layer
-{
- using json = nlohmann::json;
-
- // A more or less descriptive name?
- std::string name = "";
- // The actual layer ID
- int layer_id = -1;
- // The rectangular region surfaces are allowed to draw on
- // this layer, note however, width and hieght of the rect
- // can be negative, in which case they specify that
- // the actual value is computed using MAX + 1 - w
- // That is; allow us to specify dimensions dependent on
- // e.g. screen dimension, w/o knowing the actual screen size.
- compositor::rect rect;
- // Specify a role prefix for surfaces that should be
- // put on this layer.
- std::string role;
- // TODO: perhaps a zorder is needed here?
- std::vector<struct split_layout> layouts;
-
- mutable struct LayoutState state;
-
- // Flag of normal layout only
- bool is_normal_layout_only;
-
- explicit layer(nlohmann::json const &j);
-
- json to_json() const;
-};
-
-struct layer_map
-{
- using json = nlohmann::json;
-
- using storage_type = std::map<int, struct layer>;
- using layers_type = std::vector<uint32_t>;
- using role_to_layer_map = std::vector<std::pair<std::string, int>>;
- using addsurf_layer_map = std::map<int, int>;
-
- storage_type mapping; // map surface_id to layer
- layers_type layers; // the actual layer IDs we have
- int main_surface;
- std::string main_surface_name;
- role_to_layer_map roles;
- addsurf_layer_map surfaces; // additional surfaces on layers
-
- optional<int> get_layer_id(int surface_id);
- optional<int> get_layer_id(std::string const &role);
- optional<struct LayoutState *> get_layout_state(int surface_id)
- {
- int layer_id = *this->get_layer_id(surface_id);
- auto i = this->mapping.find(layer_id);
- return i == this->mapping.end()
- ? nullopt
- : optional<struct LayoutState *>(&i->second.state);
- }
- optional<struct layer> get_layer(int layer_id)
- {
- auto i = this->mapping.find(layer_id);
- return i == this->mapping.end() ? nullopt
- : optional<struct layer>(i->second);
- }
-
- layers_type::size_type get_layers_count() const
- {
- return this->layers.size();
- }
-
- void add_surface(int surface_id, int layer_id)
- {
- this->surfaces[surface_id] = layer_id;
- }
-
- void remove_surface(int surface_id)
- {
- this->surfaces.erase(surface_id);
- }
-
- json to_json() const;
- void setupArea(double scaling);
- compositor::rect getAreaSize(const std::string &area);
- int loadAreaDb();
-
- private:
- std::unordered_map<std::string, compositor::rect> area2size;
-
- static const char *kDefaultAreaDb;
-};
-
-struct result<struct layer_map> to_layer_map(nlohmann::json const &j);
-
-static const nlohmann::json default_layers_json = {
- {"main_surface", {
- {"surface_role", "HomeScreen"}
- }},
- {"mappings", {
- {
- {"role", "^HomeScreen$"},
- {"name", "HomeScreen"},
- {"layer_id", 1000},
- {"area", {
- {"type", "full"}
- }}
- },
- {
- {"role", "MediaPlayer|Radio|Phone|Navigation|HVAC|Settings|Dashboard|POI|Mixer"},
- {"name", "apps"},
- {"layer_id", 1001},
- {"area", {
- {"type", "rect"},
- {"rect", {
- {"x", 0},
- {"y", 218},
- {"width", -1},
- {"height", -433}
- }}
- }}
- },
- {
- {"role", "^OnScreen.*"},
- {"name", "popups"},
- {"layer_id", 9999},
- {"area", {
- {"type", "rect"},
- {"rect", {
- {"x", 0},
- {"y", 760},
- {"width", -1},
- {"height", 400}
- }}
- }}
- }
- }}
-};
-} // namespace wm
-
-#endif // TMCAGLWM_LAYERS_H
+++ /dev/null
-/*
- * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "wayland_ivi_wm.hpp"
-
-/**
- * namespace wl
- */
-namespace wl
-{
-
-/**
- * display
- */
-display::display()
- : d(std::unique_ptr<struct wl_display, void (*)(struct wl_display *)>(
- wl_display_connect(nullptr), &wl_display_disconnect)),
- r(d.get()) {}
-
-bool display::ok() const { return d && wl_display_get_error(d.get()) == 0; }
-
-void display::roundtrip() { wl_display_roundtrip(this->d.get()); }
-
-int display::dispatch() { return wl_display_dispatch(this->d.get()); }
-
-int display::dispatch_pending() { return wl_display_dispatch_pending(this->d.get()); }
-
-int display::read_events()
-{
- ;
- while (wl_display_prepare_read(this->d.get()) == -1)
- {
- if (wl_display_dispatch_pending(this->d.get()) == -1)
- {
- return -1;
- }
- }
-
- if (wl_display_flush(this->d.get()) == -1)
- {
- return -1;
- }
-
- if (wl_display_read_events(this->d.get()) == -1)
- {
- wl_display_cancel_read(this->d.get());
- }
-
- return 0;
-}
-
-void display::flush() { wl_display_flush(this->d.get()); }
-
-int display::get_fd() const { return wl_display_get_fd(this->d.get()); }
-
-int display::get_error() { return wl_display_get_error(this->d.get()); }
-
-/**
- * registry
- */
-namespace
-{
-void registry_global_created(void *data, struct wl_registry * /*r*/, uint32_t name,
- char const *iface, uint32_t v)
-{
- static_cast<struct registry *>(data)->global_created(name, iface, v);
-}
-
-void registry_global_removed(void *data, struct wl_registry * /*r*/,
- uint32_t name)
-{
- static_cast<struct registry *>(data)->global_removed(name);
-}
-
-constexpr struct wl_registry_listener registry_listener = {
- registry_global_created, registry_global_removed};
-} // namespace
-
-registry::registry(struct wl_display *d)
- : wayland_proxy(d == nullptr ? nullptr : wl_display_get_registry(d))
-{
- if (this->proxy != nullptr)
- {
- wl_registry_add_listener(this->proxy.get(), ®istry_listener, this);
- }
-}
-
-void registry::add_global_handler(char const *iface, binder bind)
-{
- this->bindings[iface] = std::move(bind);
-}
-
-void registry::global_created(uint32_t name, char const *iface, uint32_t v)
-{
- auto b = this->bindings.find(iface);
- if (b != this->bindings.end())
- {
- b->second(this->proxy.get(), name, v);
- }
- HMI_DEBUG("wl::registry @ %p global n %u i %s v %u", this->proxy.get(), name,
- iface, v);
-}
-
-void registry::global_removed(uint32_t /*name*/) {}
-
-/**
- * output
- */
-namespace
-{
-void output_geometry(void *data, struct wl_output * /*wl_output*/, int32_t x,
- int32_t y, int32_t physical_width, int32_t physical_height,
- int32_t subpixel, const char *make, const char *model,
- int32_t transform)
-{
- static_cast<struct output *>(data)->geometry(
- x, y, physical_width, physical_height, subpixel, make, model, transform);
-}
-
-void output_mode(void *data, struct wl_output * /*wl_output*/, uint32_t flags,
- int32_t width, int32_t height, int32_t refresh)
-{
- static_cast<struct output *>(data)->mode(flags, width, height, refresh);
-}
-
-void output_done(void *data, struct wl_output * /*wl_output*/)
-{
- static_cast<struct output *>(data)->done();
-}
-
-void output_scale(void *data, struct wl_output * /*wl_output*/,
- int32_t factor)
-{
- static_cast<struct output *>(data)->scale(factor);
-}
-
-constexpr struct wl_output_listener output_listener = {
- output_geometry, output_mode, output_done, output_scale};
-} // namespace
-
-output::output(struct wl_registry *r, uint32_t name, uint32_t v)
- : wayland_proxy(wl_registry_bind(r, name, &wl_output_interface, v))
-{
- wl_output_add_listener(this->proxy.get(), &output_listener, this);
-}
-
-void output::geometry(int32_t x, int32_t y, int32_t pw, int32_t ph,
- int32_t subpel, char const *make, char const *model,
- int32_t tx)
-{
- HMI_DEBUG("wm",
- "wl::output %s @ %p x %i y %i w %i h %i spel %x make %s model %s tx %i",
- __func__, this->proxy.get(), x, y, pw, ph, subpel, make, model, tx);
- this->physical_width = pw;
- this->physical_height = ph;
- this->transform = tx;
-}
-
-void output::mode(uint32_t flags, int32_t w, int32_t h, int32_t r)
-{
- HMI_DEBUG("wl::output %s @ %p f %x w %i h %i r %i", __func__,
- this->proxy.get(), flags, w, h, r);
- if ((flags & WL_OUTPUT_MODE_CURRENT) != 0u)
- {
- this->width = w;
- this->height = h;
- this->refresh = r;
- }
-}
-
-void output::done()
-{
- HMI_DEBUG("wl::output %s @ %p done", __func__, this->proxy.get());
- // Pivot and flipped
- if (this->transform == WL_OUTPUT_TRANSFORM_90 ||
- this->transform == WL_OUTPUT_TRANSFORM_270 ||
- this->transform == WL_OUTPUT_TRANSFORM_FLIPPED_90 ||
- this->transform == WL_OUTPUT_TRANSFORM_FLIPPED_270)
- {
- std::swap(this->width, this->height);
- std::swap(this->physical_width, this->physical_height);
- }
-}
-
-void output::scale(int32_t factor)
-{
- HMI_DEBUG("wl::output %s @ %p f %i", __func__, this->proxy.get(), factor);
-}
-} // namespace wl
-
-/**
- * namespace compositor
- */
-namespace compositor
-{
-
-namespace
-{
-
-void surface_visibility_changed(
- void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t surface_id, int32_t visibility)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_visibility_changed(surface_id, visibility);
-}
-
-void surface_opacity_changed(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t surface_id, wl_fixed_t opacity)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_opacity_changed(surface_id, float(wl_fixed_to_double(opacity)));
-}
-
-void surface_source_rectangle_changed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t surface_id,
- int32_t x, int32_t y, int32_t width, int32_t height)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_source_rectangle_changed(surface_id, x, y, width, height);
-}
-
-void surface_destination_rectangle_changed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t surface_id,
- int32_t x, int32_t y, int32_t width, int32_t height)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_destination_rectangle_changed(surface_id, x, y, width, height);
-}
-
-void surface_created(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t id_surface)
-{
- static_cast<struct controller *>(data)->surface_created(id_surface);
-}
-
-void surface_destroyed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t surface_id)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_destroyed(surface_id);
-}
-
-void surface_error_detected(void *data, struct ivi_wm * /*ivi_wm*/, uint32_t object_id,
- uint32_t error_code, const char *error_text)
-{
- static_cast<struct controller *>(data)->surface_error_detected(
- object_id, error_code, error_text);
-}
-
-void surface_size_changed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t surface_id,
- int32_t width, int32_t height)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_size_changed(surface_id, width, height);
-}
-
-void surface_stats_received(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t surface_id, uint32_t frame_count, uint32_t pid)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_stats_received(surface_id, frame_count, pid);
-}
-
-void surface_added_to_layer(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t layer_id, uint32_t surface_id)
-{
- auto c = static_cast<struct controller *>(data);
- c->surface_added_to_layer(layer_id, surface_id);
-}
-
-void layer_visibility_changed(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t layer_id, int32_t visibility)
-{
- auto c = static_cast<struct controller *>(data);
- c->layer_visibility_changed(layer_id, visibility);
-}
-
-void layer_opacity_changed(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t layer_id, wl_fixed_t opacity)
-{
- auto c = static_cast<struct controller *>(data);
- c->layer_opacity_changed(layer_id, float(wl_fixed_to_double(opacity)));
-}
-
-void layer_source_rectangle_changed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t layer_id,
- int32_t x, int32_t y, int32_t width, int32_t height)
-{
- auto c = static_cast<struct controller *>(data);
- c->layer_source_rectangle_changed(layer_id, x, y, width, height);
-}
-
-void layer_destination_rectangle_changed(
- void *data, struct ivi_wm * /*ivi_wm*/, uint32_t layer_id,
- int32_t x, int32_t y, int32_t width, int32_t height)
-{
- auto c = static_cast<struct controller *>(data);
- c->layer_destination_rectangle_changed(layer_id, x, y, width, height);
-}
-
-void layer_created(void *data, struct ivi_wm * /*ivi_wm*/,
- uint32_t id_layer)
-{
- static_cast<struct controller *>(data)->layer_created(id_layer);
-}
-
-void layer_destroyed(void *data, struct ivi_wm * /*ivi_wm*/, uint32_t layer_id)
-{
- auto c = static_cast<struct controller *>(data);
- c->layer_destroyed(layer_id);
-}
-
-void layer_error_detected(void *data, struct ivi_wm * /*ivi_wm*/, uint32_t object_id,
- uint32_t error_code, const char *error_text)
-{
- static_cast<struct controller *>(data)->layer_error_detected(
- object_id, error_code, error_text);
-}
-
-constexpr struct ivi_wm_listener listener = {
- surface_visibility_changed,
- layer_visibility_changed,
- surface_opacity_changed,
- layer_opacity_changed,
- surface_source_rectangle_changed,
- layer_source_rectangle_changed,
- surface_destination_rectangle_changed,
- layer_destination_rectangle_changed,
- surface_created,
- layer_created,
- surface_destroyed,
- layer_destroyed,
- surface_error_detected,
- layer_error_detected,
- surface_size_changed,
- surface_stats_received,
- surface_added_to_layer,
-};
-
-void screen_created(void *data, struct ivi_wm_screen *ivi_wm_screen, uint32_t id)
-{
- static_cast<struct screen *>(data)->screen_created((struct screen *)data, id);
-}
-
-void layer_added(void *data,
- struct ivi_wm_screen *ivi_wm_screen,
- uint32_t layer_id)
-{
- HMI_DEBUG("added layer_id:%d", layer_id);
-}
-
-void connector_name(void *data,
- struct ivi_wm_screen *ivi_wm_screen,
- const char *process_name)
-{
- HMI_DEBUG("process_name:%s", process_name);
-}
-
-void screen_error(void *data,
- struct ivi_wm_screen *ivi_wm_screen,
- uint32_t error,
- const char *message)
-{
- HMI_DEBUG("screen error:%d message:%s", error, message);
-}
-
-constexpr struct ivi_wm_screen_listener screen_listener = {
- screen_created,
- layer_added,
- connector_name,
- screen_error,
-};
-} // namespace
-
-/**
- * surface
- */
-surface::surface(uint32_t i, struct controller *c)
- : controller_child(c, i)
-{
- this->parent->add_proxy_to_sid_mapping(this->parent->proxy.get(), i);
-}
-
-void surface::set_visibility(uint32_t visibility)
-{
- HMI_DEBUG("compositor::surface id:%d v:%d", this->id, visibility);
- ivi_wm_set_surface_visibility(this->parent->proxy.get(), this->id, visibility);
-}
-
-void surface::set_source_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height)
-{
- ivi_wm_set_surface_source_rectangle(this->parent->proxy.get(), this->id,
- x, y, width, height);
-}
-
-void surface::set_destination_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height)
-{
- ivi_wm_set_surface_destination_rectangle(this->parent->proxy.get(), this->id,
- x, y, width, height);
-}
-
-/**
- * layer
- */
-layer::layer(uint32_t i, struct controller *c) : layer(i, 0, 0, c) {}
-
-layer::layer(uint32_t i, int32_t w, int32_t h, struct controller *c)
- : controller_child(c, i)
-{
- this->parent->add_proxy_to_lid_mapping(this->parent->proxy.get(), i);
- ivi_wm_create_layout_layer(c->proxy.get(), i, w, h);
-}
-
-void layer::set_visibility(uint32_t visibility)
-{
- ivi_wm_set_layer_visibility(this->parent->proxy.get(), this->id, visibility);
-}
-
-void layer::set_destination_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height)
-{
- ivi_wm_set_layer_destination_rectangle(this->parent->proxy.get(), this->id,
- x, y, width, height);
-}
-
-void layer::add_surface(uint32_t surface_id)
-{
- ivi_wm_layer_add_surface(this->parent->proxy.get(), this->id, surface_id);
-}
-
-void layer::remove_surface(uint32_t surface_id)
-{
- ivi_wm_layer_remove_surface(this->parent->proxy.get(), this->id, surface_id);
-}
-
-/**
- * screen
- */
-screen::screen(uint32_t i, struct controller *c, struct wl_output *o)
- : wayland_proxy(ivi_wm_create_screen(c->proxy.get(), o)),
- controller_child(c, i)
-{
- HMI_DEBUG("compositor::screen @ %p id %u o %p", this->proxy.get(), i, o);
-
- // Add listener for screen
- ivi_wm_screen_add_listener(this->proxy.get(), &screen_listener, this);
-}
-
-void screen::clear() { ivi_wm_screen_clear(this->proxy.get()); }
-
-void screen::screen_created(struct screen *screen, uint32_t id)
-{
- HMI_DEBUG("compositor::screen @ %p screen %u (%x) @ %p", this->proxy.get(),
- id, id, screen);
- this->id = id;
- this->parent->screens[id] = screen;
-}
-
-void screen::set_render_order(std::vector<uint32_t> const &ro)
-{
- std::size_t i;
-
- // Remove all layers from the screen render order
- ivi_wm_screen_clear(this->proxy.get());
-
- for (i = 0; i < ro.size(); i++)
- {
- HMI_DEBUG("compositor::screen @ %p add layer %u", this->proxy.get(), ro[i]);
- // Add the layer to screen render order at nearest z-position
- ivi_wm_screen_add_layer(this->proxy.get(), ro[i]);
- }
-}
-
-/**
- * controller
- */
-controller::controller(struct wl_registry *r, uint32_t name, uint32_t version)
- : wayland_proxy(
- wl_registry_bind(r, name, &ivi_wm_interface, version)),
- output_size{}
-{
- ivi_wm_add_listener(this->proxy.get(), &listener, this);
-}
-
-void controller::layer_create(uint32_t id, int32_t w, int32_t h)
-{
- this->layers[id] = std::make_unique<struct layer>(id, w, h, this);
-}
-
-void controller::surface_create(uint32_t id)
-{
- this->surfaces[id] = std::make_unique<struct surface>(id, this);
-
- // TODO: If Clipping is necessary, this process should be modified.
- {
- // Set surface type:IVI_WM_SURFACE_TYPE_DESKTOP)
- // for resizing wayland surface when switching from split to full surface.
- ivi_wm_set_surface_type(this->proxy.get(), id, IVI_WM_SURFACE_TYPE_DESKTOP);
-
- // Set source reactangle even if we should not need to set it
- // for enable setting for destination region.
- this->surfaces[id]->set_source_rectangle(0, 0, this->output_size.w, this->output_size.h);
-
- // Flush display
- this->display->flush();
- }
-}
-
-void controller::create_screen(struct wl_output *output)
-{
- // TODO: screen id is 0 (WM manages one screen for now)
- this->screen = std::make_unique<struct screen>(0, this, output);
-}
-
-void controller::get_surface_properties(uint32_t surface_id, int param)
-{
- ivi_wm_surface_get(this->proxy.get(), surface_id, param);
-}
-
-void controller::layer_created(uint32_t id)
-{
- HMI_DEBUG("compositor::controller @ %p layer %u (%x)", this->proxy.get(), id, id);
- if (this->layers.find(id) != this->layers.end())
- {
- HMI_DEBUG("WindowManager has created layer %u (%x) already", id, id);
- }
- else
- {
- this->layers[id] = std::make_unique<struct layer>(id, this);
- }
-}
-
-void controller::layer_error_detected(uint32_t object_id,
- uint32_t error_code, const char *error_text)
-{
- HMI_DEBUG("compositor::controller @ %p error o %d c %d text %s",
- this->proxy.get(), object_id, error_code, error_text);
-}
-
-void controller::surface_visibility_changed(uint32_t id, int32_t visibility)
-{
- HMI_DEBUG("compositor::surface %s @ %d v %i", __func__, id,
- visibility);
- this->sprops[id].visibility = visibility;
- this->chooks->surface_visibility(id, visibility);
-}
-
-void controller::surface_opacity_changed(uint32_t id, float opacity)
-{
- HMI_DEBUG("compositor::surface %s @ %d o %f",
- __func__, id, opacity);
- this->sprops[id].opacity = opacity;
-}
-
-void controller::surface_source_rectangle_changed(uint32_t id, int32_t x,
- int32_t y, int32_t width,
- int32_t height)
-{
- HMI_DEBUG("compositor::surface %s @ %d x %i y %i w %i h %i", __func__,
- id, x, y, width, height);
- this->sprops[id].src_rect = rect{width, height, x, y};
-}
-
-void controller::surface_destination_rectangle_changed(uint32_t id, int32_t x,
- int32_t y, int32_t width,
- int32_t height)
-{
- HMI_DEBUG("compositor::surface %s @ %d x %i y %i w %i h %i", __func__,
- id, x, y, width, height);
- this->sprops[id].dst_rect = rect{width, height, x, y};
- this->chooks->surface_destination_rectangle(id, x, y, width, height);
-}
-
-void controller::surface_size_changed(uint32_t id, int32_t width,
- int32_t height)
-{
- HMI_DEBUG("compositor::surface %s @ %d w %i h %i", __func__, id,
- width, height);
- this->sprops[id].size = size{uint32_t(width), uint32_t(height)};
- this->surfaces[id]->set_source_rectangle(0, 0, width, height);
-}
-
-void controller::surface_added_to_layer(uint32_t layer_id, uint32_t surface_id)
-{
- HMI_DEBUG("compositor::surface %s @ %d l %u",
- __func__, layer_id, surface_id);
-}
-
-void controller::surface_stats_received(uint32_t surface_id,
- uint32_t frame_count, uint32_t pid)
-{
- HMI_DEBUG("compositor::surface %s @ %d f %u pid %u",
- __func__, surface_id, frame_count, pid);
- this->sprops[surface_id].pid = pid;
-}
-
-void controller::surface_created(uint32_t id)
-{
- HMI_DEBUG("compositor::controller @ %p surface %u (%x)", this->proxy.get(), id,
- id);
- if (this->surfaces.find(id) == this->surfaces.end())
- {
- this->surfaces[id] = std::make_unique<struct surface>(id, this);
- this->chooks->surface_created(id);
-
- // Set surface type:IVI_WM_SURFACE_TYPE_DESKTOP)
- // for resizing wayland surface when switching from split to full surface.
- ivi_wm_set_surface_type(this->proxy.get(), id, IVI_WM_SURFACE_TYPE_DESKTOP);
-
- // Flush display
- this->display->flush();
- }
-}
-
-void controller::surface_destroyed(uint32_t surface_id)
-{
- HMI_DEBUG("compositor::surface %s @ %d", __func__, surface_id);
- this->chooks->surface_removed(surface_id);
- this->sprops.erase(surface_id);
- this->surfaces.erase(surface_id);
-}
-
-void controller::surface_error_detected(uint32_t object_id,
- uint32_t error_code, const char *error_text)
-{
- HMI_DEBUG("compositor::controller @ %p error o %d c %d text %s",
- this->proxy.get(), object_id, error_code, error_text);
-}
-
-void controller::layer_visibility_changed(uint32_t layer_id, int32_t visibility)
-{
- HMI_DEBUG("compositor::layer %s @ %d v %i", __func__, layer_id, visibility);
- this->lprops[layer_id].visibility = visibility;
-}
-
-void controller::layer_opacity_changed(uint32_t layer_id, float opacity)
-{
- HMI_DEBUG("compositor::layer %s @ %d o %f", __func__, layer_id, opacity);
- this->lprops[layer_id].opacity = opacity;
-}
-
-void controller::layer_source_rectangle_changed(uint32_t layer_id,
- int32_t x, int32_t y,
- int32_t width, int32_t height)
-{
- HMI_DEBUG("compositor::layer %s @ %d x %i y %i w %i h %i",
- __func__, layer_id, x, y, width, height);
- this->lprops[layer_id].src_rect = rect{width, height, x, y};
-}
-
-void controller::layer_destination_rectangle_changed(uint32_t layer_id,
- int32_t x, int32_t y,
- int32_t width, int32_t height)
-{
- HMI_DEBUG("compositor::layer %s @ %d x %i y %i w %i h %i",
- __func__, layer_id, x, y, width, height);
- this->lprops[layer_id].dst_rect = rect{width, height, x, y};
-}
-
-void controller::layer_destroyed(uint32_t layer_id)
-{
- HMI_DEBUG("compositor::layer %s @ %d", __func__, layer_id);
- this->lprops.erase(layer_id);
- this->layers.erase(layer_id);
-}
-
-void controller::add_proxy_to_sid_mapping(struct ivi_wm *p,
- uint32_t id)
-{
- HMI_DEBUG("Add surface proxy mapping for %p (%u)", p, id);
- this->surface_proxy_to_id[uintptr_t(p)] = id;
- this->sprops[id].id = id;
-}
-
-void controller::remove_proxy_to_sid_mapping(struct ivi_wm *p)
-{
- HMI_DEBUG("Remove surface proxy mapping for %p", p);
- this->surface_proxy_to_id.erase(uintptr_t(p));
-}
-
-void controller::add_proxy_to_lid_mapping(struct ivi_wm *p,
- uint32_t id)
-{
- HMI_DEBUG("Add layer proxy mapping for %p (%u)", p, id);
- this->layer_proxy_to_id[uintptr_t(p)] = id;
- this->lprops[id].id = id;
-}
-
-void controller::remove_proxy_to_lid_mapping(struct ivi_wm *p)
-{
- HMI_DEBUG("Remove layer proxy mapping for %p", p);
- this->layer_proxy_to_id.erase(uintptr_t(p));
-}
-
-void controller::add_proxy_to_id_mapping(struct wl_output *p, uint32_t id)
-{
- HMI_DEBUG("Add screen proxy mapping for %p (%u)", p, id);
- this->screen_proxy_to_id[uintptr_t(p)] = id;
-}
-
-void controller::remove_proxy_to_id_mapping(struct wl_output *p)
-{
- HMI_DEBUG("Remove screen proxy mapping for %p", p);
- this->screen_proxy_to_id.erase(uintptr_t(p));
-}
-
-} // namespace compositor
+++ /dev/null
-/*
- * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef WM_WAYLAND_HPP
-#define WM_WAYLAND_HPP
-
-#include "controller_hooks.hpp"
-#include "ivi-wm-client-protocol.h"
-#include "util.hpp"
-
-#include <functional>
-#include <memory>
-#include <unordered_map>
-#include <vector>
-
-/**
- * @struct wayland_proxy
- */
-template <typename ProxyT>
-struct wayland_proxy
-{
- std::unique_ptr<ProxyT, std::function<void(ProxyT *)>> proxy;
- wayland_proxy(wayland_proxy const &) = delete;
- wayland_proxy &operator=(wayland_proxy const &) = delete;
- wayland_proxy(void *p)
- : wayland_proxy(p,
- reinterpret_cast<void (*)(ProxyT *)>(wl_proxy_destroy)) {}
- wayland_proxy(void *p, std::function<void(ProxyT *)> &&p_del)
- : proxy(std::unique_ptr<ProxyT, std::function<void(ProxyT *)>>(
- static_cast<ProxyT *>(p), p_del)) {}
-};
-
-/**
- * namespace wl
- */
-namespace wl
-{
-
-/**
- * @struct registry
- */
-struct registry : public wayland_proxy<struct wl_registry>
-{
- typedef std::function<void(struct wl_registry *, uint32_t, uint32_t)> binder;
- std::unordered_map<std::string, binder> bindings;
-
- registry(registry const &) = delete;
- registry &operator=(registry const &) = delete;
- registry(struct wl_display *d);
-
- void add_global_handler(char const *iface, binder bind);
-
- // Events
- void global_created(uint32_t name, char const *iface, uint32_t v);
- void global_removed(uint32_t name);
-};
-
-/**
- * @struct display
- */
-struct display
-{
- std::unique_ptr<struct wl_display, void (*)(struct wl_display *)> d;
- struct registry r;
-
- display(display const &) = delete;
- display &operator=(display const &) = delete;
- display();
- bool ok() const;
- void roundtrip();
- int dispatch();
- int dispatch_pending();
- int read_events();
- void flush();
- int get_fd() const;
- int get_error();
-
- // Lets just proxy this for the registry
- inline void add_global_handler(char const *iface, registry::binder bind)
- {
- this->r.add_global_handler(iface, bind);
- }
-};
-
-/**
- * @struct output
- */
-struct output : public wayland_proxy<struct wl_output>
-{
- int width{};
- int height{};
- int physical_width{};
- int physical_height{};
- int refresh{};
- int transform{};
-
- output(output const &) = delete;
- output &operator=(output const &) = delete;
- output(struct wl_registry *r, uint32_t name, uint32_t v);
-
- // Events
- void geometry(int32_t x, int32_t y, int32_t pw, int32_t ph, int32_t subpel,
- char const *make, char const *model, int32_t tx);
- void mode(uint32_t flags, int32_t w, int32_t h, int32_t r);
- void done();
- void scale(int32_t factor);
-};
-} // namespace wl
-
-/**
- * namespace compositor
- */
-namespace compositor
-{
-
-struct size
-{
- uint32_t w, h;
-};
-
-struct rect
-{
- int32_t w, h;
- int32_t x, y;
-};
-
-static const constexpr rect full_rect = rect{-1, -1, 0, 0};
-
-inline bool operator==(struct rect a, struct rect b)
-{
- return a.w == b.w && a.h == b.h && a.x == b.x && a.y == b.y;
-}
-
-struct controller;
-
-struct controller_child
-{
- struct controller *parent;
- uint32_t id;
-
- controller_child(controller_child const &) = delete;
- controller_child &operator=(controller_child const &) = delete;
- controller_child(struct controller *c, uint32_t i) : parent(c), id(i) {}
- virtual ~controller_child() {}
-};
-
-struct surface_properties
-{
- uint32_t id; // let's just save an ID here too
- struct rect dst_rect;
- struct rect src_rect;
- struct size size;
- int32_t orientation;
- int32_t visibility;
- float opacity;
- uint32_t pid;
-};
-
-/**
- * @struct surface
- */
-struct surface : public controller_child
-{
- surface(surface const &) = delete;
- surface &operator=(surface const &) = delete;
- surface(uint32_t i, struct controller *c);
-
- // Requests
- void set_visibility(uint32_t visibility);
- void set_source_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height);
- void set_destination_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height);
-};
-
-/**
- * @struct layer
- */
-struct layer : public controller_child
-{
- layer(layer const &) = delete;
- layer &operator=(layer const &) = delete;
- layer(uint32_t i, struct controller *c);
- layer(uint32_t i, int32_t w, int32_t h, struct controller *c);
-
- // Requests
- void set_visibility(uint32_t visibility);
- void set_destination_rectangle(int32_t x, int32_t y,
- int32_t width, int32_t height);
- void add_surface(uint32_t surface_id);
- void remove_surface(uint32_t surface_id);
-};
-
-/**
- * @struct screen
- */
-struct screen : public wayland_proxy<struct ivi_wm_screen>,
- public controller_child
-{
- screen(screen const &) = delete;
- screen &operator=(screen const &) = delete;
- screen(uint32_t i, struct controller *c, struct wl_output *o);
-
- void clear();
- void screen_created(struct screen *screen, uint32_t id);
- void set_render_order(std::vector<uint32_t> const &ro);
-};
-
-/**
- * @struct controller
- */
-struct controller : public wayland_proxy<struct ivi_wm>
-{
- // This controller is still missing ivi-input
-
- typedef std::unordered_map<uintptr_t, uint32_t> proxy_to_id_map_type;
- typedef std::unordered_map<uint32_t, std::unique_ptr<struct surface>>
- surface_map_type;
- typedef std::unordered_map<uint32_t, std::unique_ptr<struct layer>>
- layer_map_type;
- typedef std::unordered_map<uint32_t, struct screen *> screen_map_type;
- typedef std::unordered_map<uint32_t, struct surface_properties> props_map;
-
- // HACK:
- // The order of these member is mandatory, as when objects are destroyed
- // they will call their parent (that's us right here!) and remove their
- // proxy-to-id mapping. I.e. the *_proxy_to_id members need to be valid
- // when the surfaces/layers/screens maps are destroyed. This sucks, but
- // I cannot see a better solution w/o globals or some other horrible
- // call-our-parent construct.
- proxy_to_id_map_type surface_proxy_to_id;
- proxy_to_id_map_type layer_proxy_to_id;
- proxy_to_id_map_type screen_proxy_to_id;
-
- props_map sprops;
- props_map lprops;
-
- surface_map_type surfaces;
- layer_map_type layers;
- screen_map_type screens;
-
- std::unique_ptr<struct screen> screen;
-
- size output_size; // Display size[pixel]
- size physical_size; // Display size[mm]
-
- // Scale for conversion CSS PX -> DP(Device Pixel)
- double scale;
-
- wm::controller_hooks *chooks;
-
- struct wl::display *display;
-
- void add_proxy_to_sid_mapping(struct ivi_wm *p, uint32_t id);
- void remove_proxy_to_sid_mapping(struct ivi_wm *p);
-
- void add_proxy_to_lid_mapping(struct ivi_wm *p, uint32_t id);
- void remove_proxy_to_lid_mapping(struct ivi_wm *p);
-
- void add_proxy_to_id_mapping(struct wl_output *p, uint32_t id);
- void remove_proxy_to_id_mapping(struct wl_output *p);
-
- bool surface_exists(uint32_t id) const
- {
- return this->surfaces.find(id) != this->surfaces.end();
- }
-
- bool layer_exists(uint32_t id) const
- {
- return this->layers.find(id) != this->layers.end();
- }
-
- controller(struct wl_registry *r, uint32_t name, uint32_t version);
-
- // Requests
- void commit_changes() const
- {
- ivi_wm_commit_changes(this->proxy.get());
- }
- void layer_create(uint32_t id, int32_t w, int32_t h);
- void surface_create(uint32_t id);
- void create_screen(struct wl_output *output);
- void get_surface_properties(uint32_t surface_id, int param = 0);
-
- // Events
- void surface_visibility_changed(uint32_t id, int32_t visibility);
- void surface_opacity_changed(uint32_t id, float opacity);
- void surface_source_rectangle_changed(uint32_t id, int32_t x, int32_t y,
- int32_t width, int32_t height);
- void surface_destination_rectangle_changed(uint32_t id, int32_t x, int32_t y,
- int32_t width, int32_t height);
- void surface_created(uint32_t id);
- void surface_destroyed(uint32_t surface_id);
- void surface_error_detected(uint32_t object_id,
- uint32_t error_code, char const *error_text);
- void surface_size_changed(uint32_t id, int32_t width, int32_t height);
- void surface_stats_received(uint32_t surface_id,
- uint32_t frame_count, uint32_t pid);
- void surface_added_to_layer(uint32_t layer_id, uint32_t surface_id);
-
- void layer_visibility_changed(uint32_t layer_id, int32_t visibility);
- void layer_opacity_changed(uint32_t layer_id, float opacity);
- void layer_source_rectangle_changed(uint32_t layer_id, int32_t x, int32_t y,
- int32_t width, int32_t height);
- void layer_destination_rectangle_changed(uint32_t layer_id, int32_t x, int32_t y,
- int32_t width, int32_t height);
- void layer_created(uint32_t id);
- void layer_destroyed(uint32_t layer_id);
- void layer_error_detected(uint32_t object_id,
- uint32_t error_code, char const *error_text);
-};
-} // namespace compositor
-
-#endif // !WM_WAYLAND_HPP
Code Review / apps / agl-service-windowmanager-2017.git / commitdiff