src/window_manager.cpp

   1 /*
   2  * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
   3  *
   4  * Licensed under the Apache License, Version 2.0 (the "License");
   5  * you may not use this file except in compliance with the License.
   6  * You may obtain a copy of the License at
   7  *
   8  *      http://www.apache.org/licenses/LICENSE-2.0
   9  *
  10  * Unless required by applicable law or agreed to in writing, software
  11  * distributed under the License is distributed on an "AS IS" BASIS,
  12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13  * See the License for the specific language governing permissions and
  14  * limitations under the License.
  15  */
  16
  17 #include <fstream>
  18 #include <regex>
  19
  20 #include "window_manager.hpp"
  21 #include "json_helper.hpp"
  22 #include "wm_config.hpp"
  23 #include "applist.hpp"
  24
  25 extern "C"
  26 {
  27 #include <systemd/sd-event.h>
  28 }
  29
  30 namespace wm
  31 {
  32
  33 static const unsigned kTimeOut = 3000000UL; /* 3s */
  34
  35 /* DrawingArea name used by "{layout}.{area}" */
  36 const char kNameLayoutNormal[] = "normal";
  37 const char kNameLayoutSplit[]  = "split";
  38 const char kNameAreaFull[]     = "full";
  39 const char kNameAreaMain[]     = "main";
  40 const char kNameAreaSub[]      = "sub";
  41
  42 /* Key for json obejct */
  43 const char kKeyDrawingName[] = "drawing_name";
  44 const char kKeyDrawingArea[] = "drawing_area";
  45 const char kKeyDrawingRect[] = "drawing_rect";
  46 const char kKeyX[]           = "x";
  47 const char kKeyY[]           = "y";
  48 const char kKeyWidth[]       = "width";
  49 const char kKeyHeight[]      = "height";
  50 const char kKeyWidthPixel[]  = "width_pixel";
  51 const char kKeyHeightPixel[] = "height_pixel";
  52 const char kKeyWidthMm[]     = "width_mm";
  53 const char kKeyHeightMm[]    = "height_mm";
  54 const char kKeyIds[]         = "ids";
  55
  56 static sd_event_source *g_timer_ev_src = nullptr;
  57 static AppList g_app_list;
  58
  59 namespace
  60 {
  61
  62 using nlohmann::json;
  63
  64 result<json> file_to_json(char const *filename)
  65 {
  66     json j;
  67     std::ifstream i(filename);
  68     if (i.fail())
  69     {
  70         HMI_DEBUG("wm", "Could not open config file, so use default layer information");
  71         j = default_layers_json;
  72     }
  73     else
  74     {
  75         i >> j;
  76     }
  77
  78     return Ok(j);
  79 }
  80
  81 struct result<layer_map> load_layer_map(char const *filename)
  82 {
  83     HMI_DEBUG("wm", "loading IDs from %s", filename);
  84
  85     auto j = file_to_json(filename);
  86     if (j.is_err())
  87     {
  88         return Err<layer_map>(j.unwrap_err());
  89     }
  90     json jids = j.unwrap();
  91
  92     return to_layer_map(jids);
  93 }
  94
  95 static int processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
  96 {
  97     HMI_NOTICE("wm", "Time out occurs because the client replys endDraw slow, so revert the request");
  98     reinterpret_cast<wm::WindowManager *>(userdata)->timerHandler();
  99     return 0;
 100 }
 101
 102 } // namespace
 103
 104 /**
 105  * WindowManager Impl
 106  */
 107 WindowManager::WindowManager(wl::display *d)
 108     : chooks{this},
 109       display{d},
 110       controller{},
 111       outputs(),
 112       layers(),
 113       id_alloc{},
 114       pending_events(false)
 115 {
 116     char const *path_layers_json = getenv("AFM_APP_INSTALL_DIR");
 117     std::string path;
 118     if (!path_layers_json)
 119     {
 120         HMI_ERROR("wm", "AFM_APP_INSTALL_DIR is not defined");
 121         path = std::string(path_layers_json);
 122     }
 123     else
 124     {
 125         path = std::string(path_layers_json) + std::string("/etc/layers.json");
 126     }
 127
 128     try
 129     {
 130         {
 131             auto l = load_layer_map(path.c_str());
 132             if (l.is_ok())
 133             {
 134                 this->layers = l.unwrap();
 135             }
 136             else
 137             {
 138                 HMI_ERROR("wm", "%s", l.err().value());
 139             }
 140         }
 141     }
 142     catch (std::exception &e)
 143     {
 144         HMI_ERROR("wm", "Loading of configuration failed: %s", e.what());
 145     }
 146 }
 147
 148 int WindowManager::init()
 149 {
 150     int ret;
 151     if (!this->display->ok())
 152     {
 153         return -1;
 154     }
 155
 156     if (this->layers.mapping.empty())
 157     {
 158         HMI_ERROR("wm", "No surface -> layer mapping loaded");
 159         return -1;
 160     }
 161
 162     // TODO: application requests by old role,
 163     //       so create role map (old, new)
 164     // Load old_role.db
 165     this->loadOldRoleDb();
 166
 167     // Make afb event
 168     for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
 169     {
 170         map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
 171     }
 172
 173     this->display->add_global_handler(
 174         "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
 175             this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
 176         });
 177
 178     this->display->add_global_handler(
 179         "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
 180             this->controller =
 181                 std::make_unique<struct compositor::controller>(r, name, v);
 182
 183             // Init controller hooks
 184             this->controller->chooks = &this->chooks;
 185
 186             // This protocol needs the output, so lets just add our mapping here...
 187             this->controller->add_proxy_to_id_mapping(
 188                 this->outputs.back()->proxy.get(),
 189                 wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
 190                     this->outputs.back()->proxy.get())));
 191
 192             // Create screen
 193             this->controller->create_screen(this->outputs.back()->proxy.get());
 194
 195             // Set display to controller
 196             this->controller->display = this->display;
 197         });
 198
 199     // First level objects
 200     this->display->roundtrip();
 201     // Second level objects
 202     this->display->roundtrip();
 203     // Third level objects
 204     this->display->roundtrip();
 205
 206     ret = init_layers();
 207     return ret;
 208 }
 209
 210 int WindowManager::dispatch_pending_events()
 211 {
 212     if (this->pop_pending_events())
 213     {
 214         this->display->dispatch_pending();
 215         return 0;
 216     }
 217     return -1;
 218 }
 219
 220 void WindowManager::set_pending_events()
 221 {
 222     this->pending_events.store(true, std::memory_order_release);
 223 }
 224
 225 result<int> WindowManager::api_request_surface(char const *appid, char const *drawing_name)
 226 {
 227     // TODO: application requests by old role,
 228     //       so convert role old to new
 229     const char *role = this->convertRoleOldToNew(drawing_name);
 230
 231     auto lid = this->layers.get_layer_id(std::string(role));
 232     if (!lid)
 233     {
 234         /**
 235        * register drawing_name as fallback and make it displayed.
 236        */
 237         lid = this->layers.get_layer_id(std::string("fallback"));
 238         HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", role);
 239         if (!lid)
 240         {
 241             return Err<int>("Drawing name does not match any role, Fallback is disabled");
 242         }
 243     }
 244
 245     auto rname = this->lookup_id(role);
 246     if (!rname)
 247     {
 248         // name does not exist yet, allocate surface id...
 249         auto id = int(this->id_alloc.generate_id(role));
 250         this->layers.add_surface(id, *lid);
 251
 252         // set the main_surface[_name] here and now
 253         if (!this->layers.main_surface_name.empty() &&
 254             this->layers.main_surface_name == drawing_name)
 255         {
 256             this->layers.main_surface = id;
 257             HMI_DEBUG("wm", "Set main_surface id to %u", id);
 258         }
 259
 260         // add client into the db
 261         std::string appid_str(appid);
 262         g_app_list.addClient(appid_str, *lid, id, std::string(role));
 263
 264         // Set role map of (new, old)
 265         this->rolenew2old[role] = std::string(drawing_name);
 266
 267         return Ok<int>(id);
 268     }
 269
 270     // Check currently registered drawing names if it is already there.
 271     return Err<int>("Surface already present");
 272 }
 273
 274 char const *WindowManager::api_request_surface(char const *appid, char const *drawing_name,
 275                                      char const *ivi_id)
 276 {
 277     ST();
 278
 279     // TODO: application requests by old role,
 280     //       so convert role old to new
 281     const char *role = this->convertRoleOldToNew(drawing_name);
 282
 283     auto lid = this->layers.get_layer_id(std::string(role));
 284     unsigned sid = std::stol(ivi_id);
 285
 286     if (!lid)
 287     {
 288         /**
 289        * register drawing_name as fallback and make it displayed.
 290        */
 291         lid = this->layers.get_layer_id(std::string("fallback"));
 292         HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", role);
 293         if (!lid)
 294         {
 295             return "Drawing name does not match any role, Fallback is disabled";
 296         }
 297     }
 298
 299     auto rname = this->lookup_id(role);
 300
 301     if (rname)
 302     {
 303         return "Surface already present";
 304     }
 305
 306     // register pair drawing_name and ivi_id
 307     this->id_alloc.register_name_id(role, sid);
 308     this->layers.add_surface(sid, *lid);
 309
 310     // this surface is already created
 311     HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", sid, *lid);
 312
 313     this->controller->layers[*lid]->add_surface(sid);
 314     this->layout_commit();
 315
 316     // add client into the db
 317     std::string appid_str(appid);
 318     g_app_list.addClient(appid_str, *lid, sid, std::string(role));
 319
 320     // Set role map of (new, old)
 321     this->rolenew2old[role] = std::string(drawing_name);
 322
 323     return nullptr;
 324 }
 325
 326 void WindowManager::api_activate_surface(char const *appid, char const *drawing_name,
 327                                char const *drawing_area, const reply_func &reply)
 328 {
 329     ST();
 330
 331     // TODO: application requests by old role,
 332     //       so convert role old to new
 333     const char *c_role = this->convertRoleOldToNew(drawing_name);
 334
 335     std::string id = appid;
 336     std::string role = c_role;
 337     std::string area = drawing_area;
 338     Task task = Task::TASK_ALLOCATE;
 339     unsigned req_num = 0;
 340     WMError ret = WMError::UNKNOWN;
 341
 342     ret = this->setRequest(id, role, area, task, &req_num);
 343
 344     if(ret != WMError::SUCCESS)
 345     {
 346         HMI_ERROR("wm", errorDescription(ret));
 347         reply("Failed to set request");
 348         return;
 349     }
 350
 351     reply(nullptr);
 352     if (req_num != g_app_list.currentRequestNumber())
 353     {
 354         // Add request, then invoked after the previous task is finished
 355         HMI_SEQ_DEBUG(req_num, "request is accepted");
 356         return;
 357     }
 358
 359     /*
 360      * Do allocate tasks
 361      */
 362     ret = this->doTransition(req_num);
 363
 364     if (ret != WMError::SUCCESS)
 365     {
 366         //this->emit_error()
 367         HMI_SEQ_ERROR(req_num, errorDescription(ret));
 368         g_app_list.removeRequest(req_num);
 369         this->processNextRequest();
 370     }
 371 }
 372
 373 void WindowManager::api_deactivate_surface(char const *appid, char const *drawing_name,
 374                                  const reply_func &reply)
 375 {
 376     ST();
 377
 378     // TODO: application requests by old role,
 379     //       so convert role old to new
 380     const char *c_role = this->convertRoleOldToNew(drawing_name);
 381
 382     /*
 383     * Check Phase
 384     */
 385     std::string id = appid;
 386     std::string role = c_role;
 387     std::string area = ""; //drawing_area;
 388     Task task = Task::TASK_RELEASE;
 389     unsigned req_num = 0;
 390     WMError ret = WMError::UNKNOWN;
 391
 392     ret = this->setRequest(id, role, area, task, &req_num);
 393
 394     if (ret != WMError::SUCCESS)
 395     {
 396         HMI_ERROR("wm", errorDescription(ret));
 397         reply("Failed to set request");
 398         return;
 399     }
 400
 401     reply(nullptr);
 402     if (req_num != g_app_list.currentRequestNumber())
 403     {
 404         // Add request, then invoked after the previous task is finished
 405         HMI_SEQ_DEBUG(req_num, "request is accepted");
 406         return;
 407     }
 408
 409     /*
 410     * Do allocate tasks
 411     */
 412     ret = this->doTransition(req_num);
 413
 414     if (ret != WMError::SUCCESS)
 415     {
 416         //this->emit_error()
 417         HMI_SEQ_ERROR(req_num, errorDescription(ret));
 418         g_app_list.removeRequest(req_num);
 419         this->processNextRequest();
 420     }
 421 }
 422
 423 void WindowManager::api_enddraw(char const *appid, char const *drawing_name)
 424 {
 425     // TODO: application requests by old role,
 426     //       so convert role old to new
 427     const char *c_role = this->convertRoleOldToNew(drawing_name);
 428
 429     std::string id = appid;
 430     std::string role = c_role;
 431     unsigned current_req = g_app_list.currentRequestNumber();
 432     bool result = g_app_list.setEndDrawFinished(current_req, id, role);
 433
 434     if (!result)
 435     {
 436         HMI_ERROR("wm", "%s is not in transition state", id.c_str());
 437         return;
 438     }
 439
 440     if (g_app_list.endDrawFullfilled(current_req))
 441     {
 442         // do task for endDraw
 443         this->stopTimer();
 444         WMError ret = this->doEndDraw(current_req);
 445
 446         if(ret != WMError::SUCCESS)
 447         {
 448             //this->emit_error();
 449         }
 450         this->emitScreenUpdated(current_req);
 451         HMI_SEQ_INFO(current_req, "Finish request status: %s", errorDescription(ret));
 452
 453         g_app_list.removeRequest(current_req);
 454
 455         this->processNextRequest();
 456     }
 457     else
 458     {
 459         HMI_SEQ_INFO(current_req, "Wait other App call endDraw");
 460         return;
 461     }
 462 }
 463
 464 result<json_object *> WindowManager::api_get_display_info()
 465 {
 466     // Check controller
 467     if (!this->controller)
 468     {
 469         return Err<json_object *>("ivi_controller global not available");
 470     }
 471
 472     // Set display info
 473     compositor::size o_size = this->controller->output_size;
 474     compositor::size p_size = this->controller->physical_size;
 475
 476     json_object *object = json_object_new_object();
 477     json_object_object_add(object, kKeyWidthPixel, json_object_new_int(o_size.w));
 478     json_object_object_add(object, kKeyHeightPixel, json_object_new_int(o_size.h));
 479     json_object_object_add(object, kKeyWidthMm, json_object_new_int(p_size.w));
 480     json_object_object_add(object, kKeyHeightMm, json_object_new_int(p_size.h));
 481
 482     return Ok<json_object *>(object);
 483 }
 484
 485 result<json_object *> WindowManager::api_get_area_info(char const *drawing_name)
 486 {
 487     HMI_DEBUG("wm", "called");
 488
 489     // TODO: application requests by old role,
 490     //       so convert role old to new
 491     const char *role = this->convertRoleOldToNew(drawing_name);
 492
 493     // Check drawing name, surface/layer id
 494     auto const &surface_id = this->lookup_id(role);
 495     if (!surface_id)
 496     {
 497         return Err<json_object *>("Surface does not exist");
 498     }
 499
 500     if (!this->controller->surface_exists(*surface_id))
 501     {
 502         return Err<json_object *>("Surface does not exist in controller!");
 503     }
 504
 505     auto layer_id = this->layers.get_layer_id(*surface_id);
 506     if (!layer_id)
 507     {
 508         return Err<json_object *>("Surface is not on any layer!");
 509     }
 510
 511     auto o_state = *this->layers.get_layout_state(*surface_id);
 512     if (o_state == nullptr)
 513     {
 514         return Err<json_object *>("Could not find layer for surface");
 515     }
 516
 517     struct LayoutState &state = *o_state;
 518     if ((state.main != *surface_id) && (state.sub != *surface_id))
 519     {
 520         return Err<json_object *>("Surface is inactive");
 521     }
 522
 523     // Set area rectangle
 524     compositor::rect area_info = this->area_info[*surface_id];
 525     json_object *object = json_object_new_object();
 526     json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
 527     json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
 528     json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
 529     json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));
 530
 531     return Ok<json_object *>(object);
 532 }
 533
 534 void WindowManager::api_ping() { this->dispatch_pending_events(); }
 535
 536 void WindowManager::send_event(char const *evname, char const *label)
 537 {
 538     HMI_DEBUG("wm", "%s: %s(%s)", __func__, evname, label);
 539
 540     json_object *j = json_object_new_object();
 541     json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
 542
 543     int ret = afb_event_push(this->map_afb_event[evname], j);
 544     if (ret != 0)
 545     {
 546         HMI_DEBUG("wm", "afb_event_push failed: %m");
 547     }
 548 }
 549
 550 void WindowManager::send_event(char const *evname, char const *label, char const *area,
 551                      int x, int y, int w, int h)
 552 {
 553     HMI_DEBUG("wm", "%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
 554               __func__, evname, label, area, x, y, w, h);
 555
 556     json_object *j_rect = json_object_new_object();
 557     json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
 558     json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
 559     json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
 560     json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));
 561
 562     json_object *j = json_object_new_object();
 563     json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
 564     json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
 565     json_object_object_add(j, kKeyDrawingRect, j_rect);
 566
 567     int ret = afb_event_push(this->map_afb_event[evname], j);
 568     if (ret != 0)
 569     {
 570         HMI_DEBUG("wm", "afb_event_push failed: %m");
 571     }
 572 }
 573
 574 /**
 575  * proxied events
 576  */
 577 void WindowManager::surface_created(uint32_t surface_id)
 578 {
 579     auto layer_id = this->layers.get_layer_id(surface_id);
 580     if (!layer_id)
 581     {
 582         HMI_DEBUG("wm", "Newly created surfce %d is not associated with any layer!",
 583                   surface_id);
 584         return;
 585     }
 586
 587     HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface_id, *layer_id);
 588
 589     this->controller->layers[*layer_id]->add_surface(surface_id);
 590     this->layout_commit();
 591 }
 592
 593 void WindowManager::surface_removed(uint32_t surface_id)
 594 {
 595     HMI_DEBUG("wm", "surface_id is %u", surface_id);
 596     g_app_list.removeSurface(surface_id);
 597 }
 598
 599 void WindowManager::removeClient(const std::string &appid)
 600 {
 601     HMI_DEBUG("wm", "Remove clinet %s from list", appid.c_str());
 602     g_app_list.removeClient(appid);
 603 }
 604
 605 void WindowManager::exceptionProcessForTransition()
 606 {
 607     unsigned req_num = g_app_list.currentRequestNumber();
 608     HMI_SEQ_NOTICE(req_num, "Process exception handling for request. Remove current request %d", req_num);
 609     g_app_list.removeRequest(req_num);
 610     HMI_SEQ_NOTICE(g_app_list.currentRequestNumber(), "Process next request if exists");
 611     this->processNextRequest();
 612 }
 613
 614 void WindowManager::timerHandler()
 615 {
 616     unsigned req_num = g_app_list.currentRequestNumber();
 617     HMI_SEQ_DEBUG(req_num, "Timer expired remove Request");
 618     g_app_list.reqDump();
 619     g_app_list.removeRequest(req_num);
 620     this->processNextRequest();
 621 }
 622
 623 /*
 624  ******* Private Functions *******
 625  */
 626
 627 bool WindowManager::pop_pending_events()
 628 {
 629     bool x{true};
 630     return this->pending_events.compare_exchange_strong(
 631         x, false, std::memory_order_consume);
 632 }
 633
 634 optional<int> WindowManager::lookup_id(char const *name)
 635 {
 636     return this->id_alloc.lookup(std::string(name));
 637 }
 638 optional<std::string> WindowManager::lookup_name(int id)
 639 {
 640     return this->id_alloc.lookup(id);
 641 }
 642
 643 /**
 644  * init_layers()
 645  */
 646 int WindowManager::init_layers()
 647 {
 648     if (!this->controller)
 649     {
 650         HMI_ERROR("wm", "ivi_controller global not available");
 651         return -1;
 652     }
 653
 654     if (this->outputs.empty())
 655     {
 656         HMI_ERROR("wm", "no output was set up!");
 657         return -1;
 658     }
 659
 660     WMConfig wm_config;
 661     wm_config.loadConfigs();
 662
 663     auto &c = this->controller;
 664
 665     auto &o = this->outputs.front();
 666     auto &s = c->screens.begin()->second;
 667     auto &layers = c->layers;
 668
 669     this->layers.loadAreaDb();
 670     const compositor::rect base = this->layers.getAreaSize("fullscreen");
 671
 672     const std::string aspect_setting = wm_config.getConfigAspect();
 673     const compositor::rect scale_rect =
 674         this->layers.getScaleDestRect(o->width, o->height, aspect_setting);
 675
 676     // Write output dimensions to ivi controller...
 677     c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
 678     c->physical_size = compositor::size{uint32_t(o->physical_width),
 679                                         uint32_t(o->physical_height)};
 680
 681     // Clear scene
 682     layers.clear();
 683
 684     // Clear screen
 685     s->clear();
 686
 687     // Quick and dirty setup of layers
 688     for (auto const &i : this->layers.mapping)
 689     {
 690         c->layer_create(i.second.layer_id, scale_rect.w, scale_rect.h);
 691         auto &l = layers[i.second.layer_id];
 692         l->set_source_rectangle(0, 0, base.w, base.h);
 693         l->set_destination_rectangle(
 694             scale_rect.x, scale_rect.y, scale_rect.w, scale_rect.h);
 695         l->set_visibility(1);
 696         HMI_DEBUG("wm", "Setting up layer %s (%d) for surface role match \"%s\"",
 697                   i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
 698     }
 699
 700     // Add layers to screen
 701     s->set_render_order(this->layers.layers);
 702
 703     this->layout_commit();
 704
 705     return 0;
 706 }
 707
 708 void WindowManager::surface_set_layout(int surface_id, const std::string& area)
 709 {
 710     if (!this->controller->surface_exists(surface_id))
 711     {
 712         HMI_ERROR("wm", "Surface %d does not exist", surface_id);
 713         return;
 714     }
 715
 716     auto o_layer_id = this->layers.get_layer_id(surface_id);
 717
 718     if (!o_layer_id)
 719     {
 720         HMI_ERROR("wm", "Surface %d is not associated with any layer!", surface_id);
 721         return;
 722     }
 723
 724     uint32_t layer_id = *o_layer_id;
 725
 726     auto const &layer = this->layers.get_layer(layer_id);
 727     auto rect = this->layers.getAreaSize(area);
 728     HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "%s : x:%d y:%d w:%d h:%d", area.c_str(),
 729                     rect.x, rect.y, rect.w, rect.h);
 730     auto &s = this->controller->surfaces[surface_id];
 731
 732     int x = rect.x;
 733     int y = rect.y;
 734     int w = rect.w;
 735     int h = rect.h;
 736
 737     HMI_DEBUG("wm", "surface_set_layout for surface %u on layer %u", surface_id,
 738               layer_id);
 739
 740     // set destination to the display rectangle
 741     s->set_destination_rectangle(x, y, w, h);
 742
 743     // update area information
 744     this->area_info[surface_id].x = x;
 745     this->area_info[surface_id].y = y;
 746     this->area_info[surface_id].w = w;
 747     this->area_info[surface_id].h = h;
 748
 749     HMI_DEBUG("wm", "Surface %u now on layer %u with rect { %d, %d, %d, %d }",
 750               surface_id, layer_id, x, y, w, h);
 751 }
 752
 753 void WindowManager::layout_commit()
 754 {
 755     this->controller->commit_changes();
 756     this->display->flush();
 757 }
 758
 759 void WindowManager::emit_activated(char const *label)
 760 {
 761     this->send_event(kListEventName[Event_Active], label);
 762 }
 763
 764 void WindowManager::emit_deactivated(char const *label)
 765 {
 766     this->send_event(kListEventName[Event_Inactive], label);
 767 }
 768
 769 void WindowManager::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
 770 {
 771     this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
 772 }
 773
 774 void WindowManager::emit_syncdraw(const std::string &role, const std::string &area)
 775 {
 776     compositor::rect rect = this->layers.getAreaSize(area);
 777     this->send_event(kListEventName[Event_SyncDraw],
 778         role.c_str(), area.c_str(), rect.x, rect.y, rect.w, rect.h);
 779 }
 780
 781 void WindowManager::emit_flushdraw(char const *label)
 782 {
 783     this->send_event(kListEventName[Event_FlushDraw], label);
 784 }
 785
 786 void WindowManager::emit_visible(char const *label, bool is_visible)
 787 {
 788     this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
 789 }
 790
 791 void WindowManager::emit_invisible(char const *label)
 792 {
 793     return emit_visible(label, false);
 794 }
 795
 796 void WindowManager::emit_visible(char const *label) { return emit_visible(label, true); }
 797
 798 void WindowManager::activate(int id)
 799 {
 800     auto ip = this->controller->sprops.find(id);
 801     if (ip != this->controller->sprops.end())
 802     {
 803         this->controller->surfaces[id]->set_visibility(1);
 804         char const *label =
 805             this->lookup_name(id).value_or("unknown-name").c_str();
 806
 807          // FOR CES DEMO >>>
 808         if ((0 == strcmp(label, "radio")) ||
 809             (0 == strcmp(label, "music")) ||
 810             (0 == strcmp(label, "video")) ||
 811             (0 == strcmp(label, "map")))
 812         {
 813             for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
 814             {
 815                 if (id == *i)
 816                 {
 817                     // Remove id
 818                     this->surface_bg.erase(i);
 819
 820                     // Remove from BG layer (999)
 821                     HMI_DEBUG("wm", "Remove %s(%d) from BG layer", label, id);
 822                     this->controller->layers[999]->remove_surface(id);
 823
 824                     // Add to FG layer (1001)
 825                     HMI_DEBUG("wm", "Add %s(%d) to FG layer", label, id);
 826                     this->controller->layers[1001]->add_surface(id);
 827
 828                     for (int j : this->surface_bg)
 829                     {
 830                         HMI_DEBUG("wm", "Stored id:%d", j);
 831                     }
 832                     break;
 833                 }
 834             }
 835         }
 836         // <<< FOR CES DEMO
 837
 838         this->layout_commit();
 839
 840         // TODO: application requests by old role,
 841         //       so convert role new to old for emitting event
 842         const char* old_role = this->rolenew2old[label].c_str();
 843
 844         this->emit_visible(old_role);
 845         this->emit_activated(old_role);
 846     }
 847 }
 848
 849 void WindowManager::deactivate(int id)
 850 {
 851     auto ip = this->controller->sprops.find(id);
 852     if (ip != this->controller->sprops.end())
 853     {
 854         char const *label =
 855             this->lookup_name(id).value_or("unknown-name").c_str();
 856
 857         // FOR CES DEMO >>>
 858         if ((0 == strcmp(label, "radio")) ||
 859             (0 == strcmp(label, "music")) ||
 860             (0 == strcmp(label, "video")) ||
 861             (0 == strcmp(label, "map")))
 862         {
 863
 864             // Store id
 865             this->surface_bg.push_back(id);
 866
 867             // Remove from FG layer (1001)
 868             HMI_DEBUG("wm", "Remove %s(%d) from FG layer", label, id);
 869             this->controller->layers[1001]->remove_surface(id);
 870
 871             // Add to BG layer (999)
 872             HMI_DEBUG("wm", "Add %s(%d) to BG layer", label, id);
 873             this->controller->layers[999]->add_surface(id);
 874
 875             for (int j : surface_bg)
 876             {
 877                 HMI_DEBUG("wm", "Stored id:%d", j);
 878             }
 879         }
 880         else
 881         {
 882             this->controller->surfaces[id]->set_visibility(0);
 883         }
 884         // <<< FOR CES DEMO
 885
 886         this->layout_commit();
 887
 888         // TODO: application requests by old role,
 889         //       so convert role new to old for emitting event
 890         const char* old_role = this->rolenew2old[label].c_str();
 891
 892         this->emit_deactivated(old_role);
 893         this->emit_invisible(old_role);
 894     }
 895 }
 896
 897 WMError WindowManager::setRequest(const std::string& appid, const std::string &role, const std::string &area,
 898                             Task task, unsigned* req_num)
 899 {
 900     if (!g_app_list.contains(appid))
 901     {
 902         return WMError::NOT_REGISTERED;
 903     }
 904
 905     auto client = g_app_list.lookUpClient(appid);
 906
 907     /*
 908      * Queueing Phase
 909      */
 910     unsigned current = g_app_list.currentRequestNumber();
 911     unsigned requested_num = g_app_list.getRequestNumber(appid);
 912     if (requested_num != 0)
 913     {
 914         HMI_SEQ_INFO(requested_num,
 915             "%s %s %s request is already queued", appid.c_str(), role.c_str(), area.c_str());
 916         return REQ_REJECTED;
 917     }
 918
 919     WMRequest req = WMRequest(appid, role, area, task);
 920     unsigned new_req = g_app_list.addRequest(req);
 921     *req_num = new_req;
 922     g_app_list.reqDump();
 923
 924     HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", appid.c_str(), role.c_str(), area.c_str());
 925
 926     return WMError::SUCCESS;
 927 }
 928
 929 WMError WindowManager::doTransition(unsigned req_num)
 930 {
 931     HMI_SEQ_DEBUG(req_num, "check policy");
 932     WMError ret = this->checkPolicy(req_num);
 933     if (ret != WMError::SUCCESS)
 934     {
 935         return ret;
 936     }
 937     HMI_SEQ_DEBUG(req_num, "Start transition.");
 938     ret = this->startTransition(req_num);
 939     return ret;
 940 }
 941
 942 WMError WindowManager::checkPolicy(unsigned req_num)
 943 {
 944     /*
 945     * Check Policy
 946     */
 947     // get current trigger
 948     bool found = false;
 949     bool split = false;
 950     WMError ret = WMError::LAYOUT_CHANGE_FAIL;
 951     auto trigger = g_app_list.getRequest(req_num, &found);
 952     if (!found)
 953     {
 954         ret = WMError::NO_ENTRY;
 955         return ret;
 956     }
 957     std::string req_area = trigger.area;
 958
 959     // >>>> Compatible with current window manager until policy manager coming
 960     if (trigger.task == Task::TASK_ALLOCATE)
 961     {
 962         HMI_SEQ_DEBUG(req_num, "Check split or not");
 963         const char *msg = this->check_surface_exist(trigger.role.c_str());
 964
 965         if (msg)
 966         {
 967             HMI_SEQ_ERROR(req_num, msg);
 968             ret = WMError::LAYOUT_CHANGE_FAIL;
 969             return ret;
 970         }
 971
 972         auto const &surface_id = this->lookup_id(trigger.role.c_str());
 973         auto o_state = *this->layers.get_layout_state(*surface_id);
 974         struct LayoutState &state = *o_state;
 975
 976         unsigned curernt_sid = state.main;
 977         split = this->can_split(state, *surface_id);
 978
 979         if (split)
 980         {
 981             HMI_SEQ_DEBUG(req_num, "Split happens");
 982             // Get current visible role
 983             std::string add_role = this->lookup_name(state.main).value();
 984             // Set next area
 985             std::string add_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaMain);
 986             // Change request area
 987             req_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaSub);
 988             HMI_SEQ_NOTICE(req_num, "Change request area from %s to %s, because split happens",
 989                                 trigger.area.c_str(), req_area.c_str());
 990             // set another action
 991             std::string add_name = g_app_list.getAppID(curernt_sid, add_role, &found);
 992             if (!found)
 993             {
 994                 HMI_SEQ_ERROR(req_num, "Couldn't widhdraw with surfaceID : %d", curernt_sid);
 995                 ret = WMError::NOT_REGISTERED;
 996                 return ret;
 997             }
 998             HMI_SEQ_INFO(req_num, "Additional split app %s, role: %s, area: %s",
 999                          add_name.c_str(), add_role.c_str(), add_area.c_str());
1000             // Set split action
1001             bool end_draw_finished = false;
1002             WMAction split_action{
1003                 add_name,
1004                 add_role,
1005                 add_area,
1006                 TaskVisible::VISIBLE,
1007                 end_draw_finished};
1008             WMError ret = g_app_list.setAction(req_num, split_action);
1009             if (ret != WMError::SUCCESS)
1010             {
1011                 HMI_SEQ_ERROR(req_num, "Failed to set action");
1012                 return ret;
1013             }
1014             g_app_list.reqDump();
1015         }
1016     }
1017     else
1018     {
1019         HMI_SEQ_DEBUG(req_num, "split doesn't happen");
1020     }
1021
1022     // Set invisible task(Remove if policy manager finish)
1023     ret = this->setInvisibleTask(trigger.role, split);
1024     if(ret != WMError::SUCCESS)
1025     {
1026         HMI_SEQ_ERROR(req_num, "Failed to set invisible task: %s", errorDescription(ret));
1027         return ret;
1028     }
1029
1030     /*  get new status from Policy Manager */
1031     HMI_SEQ_NOTICE(req_num, "ATM, Policy manager does't exist, then set WMAction as is");
1032     if(trigger.role == "homescreen")
1033     {
1034         // TODO : Remove when Policy Manager completed
1035         HMI_SEQ_NOTICE(req_num, "Hack. This process will be removed. Change HomeScreen code!!");
1036         req_area = "fullscreen";
1037     }
1038     TaskVisible task_visible =
1039         (trigger.task == Task::TASK_ALLOCATE) ? TaskVisible::VISIBLE : TaskVisible::INVISIBLE;
1040
1041     ret = g_app_list.setAction(req_num, trigger.appid, trigger.role, req_area, task_visible);
1042     g_app_list.reqDump();
1043
1044     return ret;
1045 }
1046
1047 WMError WindowManager::startTransition(unsigned req_num)
1048 {
1049     bool sync_draw_happen = false;
1050     bool found = false;
1051     WMError ret = WMError::SUCCESS;
1052     auto actions = g_app_list.getActions(req_num, &found);
1053     if (!found)
1054     {
1055         ret = WMError::NO_ENTRY;
1056         HMI_SEQ_ERROR(req_num,
1057             "Window Manager bug :%s : Action is not set", errorDescription(ret));
1058         return ret;
1059     }
1060
1061     for (const auto &action : actions)
1062     {
1063         if (action.visible != TaskVisible::INVISIBLE)
1064         {
1065             sync_draw_happen = true;
1066
1067             // TODO: application requests by old role,
1068             //       so convert role new to old for emitting event
1069             std::string old_role = this->rolenew2old[action.role];
1070
1071             this->emit_syncdraw(old_role, action.area);
1072             /* TODO: emit event for app not subscriber
1073             if(g_app_list.contains(y.appid))
1074                 g_app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
1075         }
1076     }
1077
1078     if (sync_draw_happen)
1079     {
1080         this->setTimer();
1081     }
1082     else
1083     {
1084         // deactivate only, no syncDraw
1085         // Make it deactivate here
1086         for (const auto &x : actions)
1087         {
1088             if (g_app_list.contains(x.appid))
1089             {
1090                 auto client = g_app_list.lookUpClient(x.appid);
1091                 this->deactivate(client->surfaceID(x.role));
1092             }
1093         }
1094         ret = NO_LAYOUT_CHANGE;
1095     }
1096     return ret;
1097 }
1098
1099 WMError WindowManager::setInvisibleTask(const std::string &role, bool split)
1100 {
1101     unsigned req_num = g_app_list.currentRequestNumber();
1102     HMI_SEQ_DEBUG(req_num, "set current visible app to invisible task");
1103     // This task is copied from original actiavete surface
1104     const char *drawing_name = this->rolenew2old[role].c_str();
1105     auto const &surface_id = this->lookup_id(role.c_str());
1106     auto layer_id = this->layers.get_layer_id(*surface_id);
1107     auto o_state = *this->layers.get_layout_state(*surface_id);
1108     struct LayoutState &state = *o_state;
1109     std::string add_name, add_role;
1110     std::string add_area = "";
1111     int surface;
1112     TaskVisible task_visible = TaskVisible::INVISIBLE;
1113     bool end_draw_finished = true;
1114     bool found = false;
1115
1116     for (auto const &l : this->layers.mapping)
1117     {
1118         if (l.second.layer_id <= *layer_id)
1119         {
1120             continue;
1121         }
1122         HMI_DEBUG("wm", "debug: main %d , sub : %d", l.second.state.main, l.second.state.sub);
1123         if (l.second.state.main != -1)
1124         {
1125             //this->deactivate(l.second.state.main);
1126             surface = l.second.state.main;
1127             add_role = *this->id_alloc.lookup(surface);
1128             add_name = g_app_list.getAppID(surface, add_role, &found);
1129             if(!found){
1130                 return WMError::NOT_REGISTERED;
1131             }
1132             HMI_SEQ_INFO(req_num, "Invisible %s", add_name.c_str());
1133             WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
1134             g_app_list.setAction(req_num, act);
1135             l.second.state.main = -1;
1136         }
1137
1138         if (l.second.state.sub != -1)
1139         {
1140             //this->deactivate(l.second.state.sub);
1141             surface = l.second.state.sub;
1142             add_role = *this->id_alloc.lookup(surface);
1143             add_name = g_app_list.getAppID(surface, add_role, &found);
1144             if (!found)
1145             {
1146                 return WMError::NOT_REGISTERED;
1147             }
1148             HMI_SEQ_INFO(req_num, "Invisible %s", add_name.c_str());
1149             WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
1150             g_app_list.setAction(req_num, act);
1151             l.second.state.sub = -1;
1152         }
1153     }
1154
1155     // change current state here, but this is hack
1156     auto layer = this->layers.get_layer(*layer_id);
1157
1158     if (state.main == -1)
1159     {
1160         HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
1161     }
1162     else
1163     {
1164         if (0 != strcmp(drawing_name, "HomeScreen"))
1165         {
1166             if (split)
1167             {
1168                 if (state.sub != *surface_id)
1169                 {
1170                     if (state.sub != -1)
1171                     {
1172                         //this->deactivate(state.sub);
1173                         WMAction deact_sub;
1174                         deact_sub.role =
1175                             std::move(*this->id_alloc.lookup(state.sub));
1176                         deact_sub.area = add_area;
1177                         deact_sub.appid = g_app_list.getAppID(state.sub, deact_sub.role, &found);
1178                         if (!found)
1179                         {
1180                             HMI_SEQ_ERROR(req_num, "App doesn't exist for role : %s",
1181                                             deact_sub.role.c_str());
1182                             return WMError::NOT_REGISTERED;
1183                         }
1184                         deact_sub.visible = task_visible;
1185                         deact_sub.end_draw_finished = end_draw_finished;
1186                         HMI_SEQ_DEBUG(req_num, "Set invisible task for %s", deact_sub.appid.c_str());
1187                         g_app_list.setAction(req_num, deact_sub);
1188                     }
1189                 }
1190                 //state = LayoutState{state.main, *surface_id};
1191             }
1192             else
1193             {
1194                 HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
1195
1196                 //this->surface_set_layout(*surface_id);
1197                 if (state.main != *surface_id)
1198                 {
1199                     // this->deactivate(state.main);
1200                     WMAction deact_main;
1201                     deact_main.role = std::move(*this->id_alloc.lookup(state.main));
1202                     ;
1203                     deact_main.area = add_area;
1204                     deact_main.appid = g_app_list.getAppID(state.main, deact_main.role, &found);
1205                     if (!found)
1206                     {
1207                         HMI_SEQ_DEBUG(req_num, "sub surface ddoesn't exist");
1208                         return WMError::NOT_REGISTERED;
1209                     }
1210                     deact_main.visible = task_visible;
1211                     deact_main.end_draw_finished = end_draw_finished;
1212                     HMI_SEQ_DEBUG(req_num, "sub surface doesn't exist");
1213                     g_app_list.setAction(req_num, deact_main);
1214                 }
1215                 if (state.sub != -1)
1216                 {
1217                     if (state.sub != *surface_id)
1218                     {
1219                         //this->deactivate(state.sub);
1220                         WMAction deact_sub;
1221                         deact_sub.role = std::move(*this->id_alloc.lookup(state.sub));
1222                         ;
1223                         deact_sub.area = add_area;
1224                         deact_sub.appid = g_app_list.getAppID(state.sub, deact_sub.role, &found);
1225                         if (!found)
1226                         {
1227                             HMI_SEQ_DEBUG(req_num, "sub surface ddoesn't exist");
1228                             return WMError::NOT_REGISTERED;
1229                         }
1230                         deact_sub.visible = task_visible;
1231                         deact_sub.end_draw_finished = end_draw_finished;
1232                         HMI_SEQ_DEBUG(req_num, "sub surface doesn't exist");
1233                         g_app_list.setAction(req_num, deact_sub);
1234                     }
1235                 }
1236                 //state = LayoutState{*surface_id};
1237             }
1238         }
1239     }
1240     return WMError::SUCCESS;
1241 }
1242
1243 WMError WindowManager::doEndDraw(unsigned req_num)
1244 {
1245     // get actions
1246     bool found;
1247     auto actions = g_app_list.getActions(req_num, &found);
1248     WMError ret = WMError::SUCCESS;
1249     if (!found)
1250     {
1251         ret = WMError::NO_ENTRY;
1252         return ret;
1253     }
1254
1255     HMI_SEQ_INFO(req_num, "do endDraw");
1256
1257     // layout change and make it visible
1258     for (const auto &act : actions)
1259     {
1260         // layout change
1261         if(!g_app_list.contains(act.appid)){
1262             ret = WMError::NOT_REGISTERED;
1263         }
1264         ret = this->layoutChange(act);
1265         if(ret != WMError::SUCCESS)
1266         {
1267             HMI_SEQ_WARNING(req_num,
1268                 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1269             return ret;
1270         }
1271         ret = this->visibilityChange(act);
1272         if (ret != WMError::SUCCESS)
1273         {
1274             HMI_SEQ_WARNING(req_num,
1275                 "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
1276             return ret;
1277         }
1278         HMI_SEQ_DEBUG(req_num, "visible %s", act.role.c_str());
1279         //this->lm_enddraw(act.role.c_str());
1280     }
1281
1282     // Change current state
1283     this->changeCurrentState(req_num);
1284
1285     HMI_SEQ_INFO(req_num, "emit flushDraw");
1286
1287     for(const auto &act_flush : actions)
1288     {
1289         if(act_flush.visible != TaskVisible::INVISIBLE)
1290         {
1291             // TODO: application requests by old role,
1292             //       so convert role new to old for emitting event
1293             std::string old_role = this->rolenew2old[act_flush.role];
1294
1295             this->emit_flushdraw(old_role.c_str());
1296         }
1297     }
1298
1299     return ret;
1300 }
1301
1302 WMError WindowManager::layoutChange(const WMAction &action)
1303 {
1304     if (action.visible == TaskVisible::INVISIBLE)
1305     {
1306         // Visibility is not change -> no redraw is required
1307         return WMError::SUCCESS;
1308     }
1309     auto client = g_app_list.lookUpClient(action.appid);
1310     unsigned surface = client->surfaceID(action.role);
1311     if (surface == 0)
1312     {
1313         HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1314                       "client doesn't have surface with role(%s)", action.role.c_str());
1315         return WMError::NOT_REGISTERED;
1316     }
1317     // Layout Manager
1318     WMError ret = this->setSurfaceSize(surface, action.area);
1319     return ret;
1320 }
1321
1322 WMError WindowManager::visibilityChange(const WMAction &action)
1323 {
1324     HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Change visibility");
1325     if(!g_app_list.contains(action.appid)){
1326         return WMError::NOT_REGISTERED;
1327     }
1328     auto client = g_app_list.lookUpClient(action.appid);
1329     unsigned surface = client->surfaceID(action.role);
1330     if(surface == 0)
1331     {
1332         HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
1333                       "client doesn't have surface with role(%s)", action.role.c_str());
1334         return WMError::NOT_REGISTERED;
1335     }
1336
1337     if (action.visible != TaskVisible::INVISIBLE)
1338     {
1339         this->activate(surface); // Layout Manager task
1340     }
1341     else
1342     {
1343         this->deactivate(surface); // Layout Manager task
1344     }
1345     return WMError::SUCCESS;
1346 }
1347
1348 WMError WindowManager::setSurfaceSize(unsigned surface, const std::string &area)
1349 {
1350     this->surface_set_layout(surface, area);
1351
1352     return WMError::SUCCESS;
1353 }
1354
1355 WMError WindowManager::changeCurrentState(unsigned req_num)
1356 {
1357     HMI_SEQ_DEBUG(req_num, "Change current layout state");
1358     bool trigger_found = false, action_found = false;
1359     auto trigger = g_app_list.getRequest(req_num, &trigger_found);
1360     auto actions = g_app_list.getActions(req_num, &action_found);
1361     if (!trigger_found || !action_found)
1362     {
1363         HMI_SEQ_ERROR(req_num, "Action not found");
1364         return WMError::LAYOUT_CHANGE_FAIL;
1365     }
1366
1367     // Layout state reset
1368     struct LayoutState reset_state{-1, -1};
1369     HMI_SEQ_DEBUG(req_num,"Reset layout state");
1370     for (const auto &action : actions)
1371     {
1372         if(!g_app_list.contains(action.appid)){
1373             return WMError::NOT_REGISTERED;
1374         }
1375         auto client = g_app_list.lookUpClient(action.appid);
1376         auto pCurState = *this->layers.get_layout_state((int)client->surfaceID(action.role));
1377         if(pCurState == nullptr)
1378         {
1379             HMI_SEQ_ERROR(req_num, "Counldn't find current status");
1380             continue;
1381         }
1382         pCurState->main = reset_state.main;
1383         pCurState->sub = reset_state.sub;
1384     }
1385
1386     HMI_SEQ_DEBUG(req_num, "Change state");
1387     for (const auto &action : actions)
1388     {
1389         auto client = g_app_list.lookUpClient(action.appid);
1390         auto pLayerCurState = *this->layers.get_layout_state((int)client->surfaceID(action.role));
1391         if (pLayerCurState == nullptr)
1392         {
1393             HMI_SEQ_ERROR(req_num, "Counldn't find current status");
1394             continue;
1395         }
1396         int surface = -1;
1397
1398         if (action.visible != TaskVisible::INVISIBLE)
1399         {
1400             surface = (int)client->surfaceID(action.role);
1401             HMI_SEQ_INFO(req_num, "Change %s surface : %d, state visible area : %s",
1402                             action.role.c_str(), surface, action.area.c_str());
1403             // visible == true -> layout changes
1404             if(action.area == "normal.full" || action.area == "split.main")
1405             {
1406                 pLayerCurState->main = surface;
1407             }
1408             else if (action.area == "split.sub")
1409             {
1410                 pLayerCurState->sub = surface;
1411             }
1412             else
1413             {
1414                 // normalfull
1415                 pLayerCurState->main = surface;
1416             }
1417         }
1418     }
1419
1420     return WMError::SUCCESS;
1421 }
1422
1423 void WindowManager::emitScreenUpdated(unsigned req_num)
1424 {
1425     // Get visible apps
1426     HMI_SEQ_DEBUG(req_num, "emit screen updated");
1427     bool found = false;
1428     auto actions = g_app_list.getActions(req_num, &found);
1429
1430     // create json object
1431     json_object *j = json_object_new_object();
1432     json_object *jarray = json_object_new_array();
1433
1434     for(const auto& action: actions)
1435     {
1436         if(action.visible != TaskVisible::INVISIBLE)
1437         {
1438             json_object_array_add(jarray, json_object_new_string(action.appid.c_str()));
1439         }
1440     }
1441     json_object_object_add(j, kKeyIds, jarray);
1442     HMI_SEQ_INFO(req_num, "Visible app: %s", json_object_get_string(j));
1443
1444     int ret = afb_event_push(
1445         this->map_afb_event[kListEventName[Event_ScreenUpdated]], j);
1446     if (ret != 0)
1447     {
1448         HMI_DEBUG("wm", "afb_event_push failed: %m");
1449     }
1450     json_object_put(jarray);
1451 }
1452
1453 void WindowManager::setTimer()
1454 {
1455     HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Timer set activate");
1456     if (g_timer_ev_src == nullptr)
1457     {
1458         // firsttime set into sd_event
1459         int ret = sd_event_add_time(afb_daemon_get_event_loop(), &g_timer_ev_src,
1460             CLOCK_REALTIME, time(NULL) * (1000000UL) + kTimeOut, 1, processTimerHandler, this);
1461         if (ret < 0)
1462         {
1463             HMI_ERROR("wm", "Could't set timer");
1464         }
1465     }
1466     else
1467     {
1468         // update timer limitation after second time
1469         sd_event_source_set_time(g_timer_ev_src, time(NULL) * (1000000UL) + kTimeOut);
1470         sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_ONESHOT);
1471     }
1472 }
1473
1474 void WindowManager::stopTimer()
1475 {
1476     unsigned req_num = g_app_list.currentRequestNumber();
1477     HMI_SEQ_DEBUG(req_num, "Timer stop");
1478     int rc = sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_OFF);
1479     if (rc < 0)
1480     {
1481         HMI_SEQ_ERROR(req_num, "Timer stop failed");
1482     }
1483 }
1484
1485 void WindowManager::processNextRequest()
1486 {
1487     g_app_list.next();
1488     g_app_list.reqDump();
1489     unsigned req_num = g_app_list.currentRequestNumber();
1490     if (g_app_list.haveRequest())
1491     {
1492         HMI_SEQ_DEBUG(req_num, "Process next request");
1493         WMError rc = doTransition(req_num);
1494         if (rc != WMError::SUCCESS)
1495         {
1496             HMI_SEQ_ERROR(req_num, errorDescription(rc));
1497         }
1498     }
1499     else
1500     {
1501         HMI_SEQ_DEBUG(req_num, "Nothing Request. Waiting Request");
1502     }
1503 }
1504
1505 const char* WindowManager::convertRoleOldToNew(char const *old_role)
1506 {
1507     const char *new_role = nullptr;
1508
1509     for (auto const &on : this->roleold2new)
1510     {
1511         std::regex regex = std::regex(on.first);
1512         if (std::regex_match(old_role, regex))
1513         {
1514             // role is old. So convert to new.
1515             new_role = on.second.c_str();
1516             break;
1517         }
1518     }
1519
1520     if (nullptr == new_role)
1521     {
1522         // role is new or fallback.
1523         new_role = old_role;
1524     }
1525
1526     HMI_DEBUG("wm", "old:%s -> new:%s", old_role, new_role);
1527
1528     return new_role;
1529 }
1530
1531 int WindowManager::loadOldRoleDb()
1532 {
1533     // Get afm application installed dir
1534     char const *afm_app_install_dir = getenv("AFM_APP_INSTALL_DIR");
1535     HMI_DEBUG("wm", "afm_app_install_dir:%s", afm_app_install_dir);
1536
1537     std::string file_name;
1538     if (!afm_app_install_dir)
1539     {
1540         HMI_ERROR("wm", "AFM_APP_INSTALL_DIR is not defined");
1541     }
1542     else
1543     {
1544         file_name = std::string(afm_app_install_dir) + std::string("/etc/old_roles.db");
1545     }
1546
1547     // Load old_role.db
1548     json_object* json_obj;
1549     int ret = jh::inputJsonFilie(file_name.c_str(), &json_obj);
1550     if (0 > ret)
1551     {
1552         HMI_ERROR("wm", "Could not open old_role.db, so use default old_role information");
1553         json_obj = json_tokener_parse(kDefaultOldRoleDb);
1554     }
1555     HMI_DEBUG("wm", "json_obj dump:%s", json_object_get_string(json_obj));
1556
1557     // Perse apps
1558     json_object* json_cfg;
1559     if (!json_object_object_get_ex(json_obj, "old_roles", &json_cfg))
1560     {
1561         HMI_ERROR("wm", "Parse Error!!");
1562         return -1;
1563     }
1564
1565     int len = json_object_array_length(json_cfg);
1566     HMI_DEBUG("wm", "json_cfg len:%d", len);
1567     HMI_DEBUG("wm", "json_cfg dump:%s", json_object_get_string(json_cfg));
1568
1569     for (int i=0; i<len; i++)
1570     {
1571         json_object* json_tmp = json_object_array_get_idx(json_cfg, i);
1572
1573         const char* old_role = jh::getStringFromJson(json_tmp, "name");
1574         if (nullptr == old_role)
1575         {
1576             HMI_ERROR("wm", "Parse Error!!");
1577             return -1;
1578         }
1579
1580         const char* new_role = jh::getStringFromJson(json_tmp, "new");
1581         if (nullptr == new_role)
1582         {
1583             HMI_ERROR("wm", "Parse Error!!");
1584             return -1;
1585         }
1586
1587         this->roleold2new[old_role] = std::string(new_role);
1588     }
1589
1590     // Check
1591     for(auto itr = this->roleold2new.begin();
1592       itr != this->roleold2new.end(); ++itr)
1593     {
1594         HMI_DEBUG("wm", ">>> role old:%s new:%s",
1595                   itr->first.c_str(), itr->second.c_str());
1596     }
1597
1598     // Release json_object
1599     json_object_put(json_obj);
1600
1601     return 0;
1602 }
1603
1604 const char *WindowManager::check_surface_exist(const char *drawing_name)
1605 {
1606     auto const &surface_id = this->lookup_id(drawing_name);
1607     if (!surface_id)
1608     {
1609         return "Surface does not exist";
1610     }
1611
1612     if (!this->controller->surface_exists(*surface_id))
1613     {
1614         return "Surface does not exist in controller!";
1615     }
1616
1617     auto layer_id = this->layers.get_layer_id(*surface_id);
1618
1619     if (!layer_id)
1620     {
1621         return "Surface is not on any layer!";
1622     }
1623
1624     auto o_state = *this->layers.get_layout_state(*surface_id);
1625
1626     if (o_state == nullptr)
1627     {
1628         return "Could not find layer for surface";
1629     }
1630
1631     HMI_DEBUG("wm", "surface %d is detected", *surface_id);
1632     return nullptr;
1633 }
1634
1635 bool WindowManager::can_split(struct LayoutState const &state, int new_id)
1636 {
1637     if (state.main != -1 && state.main != new_id)
1638     {
1639         auto new_id_layer = this->layers.get_layer_id(new_id).value();
1640         auto current_id_layer = this->layers.get_layer_id(state.main).value();
1641
1642         // surfaces are on separate layers, don't bother.
1643         if (new_id_layer != current_id_layer)
1644         {
1645             return false;
1646         }
1647
1648         std::string const &new_id_str = this->lookup_name(new_id).value();
1649         std::string const &cur_id_str = this->lookup_name(state.main).value();
1650
1651         auto const &layer = this->layers.get_layer(new_id_layer);
1652
1653         HMI_DEBUG("wm", "layer info name: %s", layer->name.c_str());
1654
1655         if (layer->layouts.empty())
1656         {
1657             return false;
1658         }
1659
1660         for (auto i = layer->layouts.cbegin(); i != layer->layouts.cend(); i++)
1661         {
1662             HMI_DEBUG("wm", "%d main_match '%s'", new_id_layer, i->main_match.c_str());
1663             auto rem = std::regex(i->main_match);
1664             if (std::regex_match(cur_id_str, rem))
1665             {
1666                 // build the second one only if the first already matched
1667                 HMI_DEBUG("wm", "%d sub_match '%s'", new_id_layer, i->sub_match.c_str());
1668                 auto res = std::regex(i->sub_match);
1669                 if (std::regex_match(new_id_str, res))
1670                 {
1671                     HMI_DEBUG("wm", "layout matched!");
1672                     return true;
1673                 }
1674             }
1675         }
1676     }
1677
1678     return false;
1679 }
1680
1681 const char* WindowManager::kDefaultOldRoleDb = "{ \
1682     \"old_roles\": [ \
1683         { \
1684             \"name\": \"HomeScreen\", \
1685             \"new\": \"homescreen\" \
1686         }, \
1687         { \
1688             \"name\": \"Music\", \
1689             \"new\": \"music\" \
1690         }, \
1691         { \
1692             \"name\": \"MediaPlayer\", \
1693             \"new\": \"music\" \
1694         }, \
1695         { \
1696             \"name\": \"Video\", \
1697             \"new\": \"video\" \
1698         }, \
1699         { \
1700             \"name\": \"VideoPlayer\", \
1701             \"new\": \"video\" \
1702         }, \
1703         { \
1704             \"name\": \"WebBrowser\", \
1705             \"new\": \"browser\" \
1706         }, \
1707         { \
1708             \"name\": \"Radio\", \
1709             \"new\": \"radio\" \
1710         }, \
1711         { \
1712             \"name\": \"Phone\", \
1713             \"new\": \"phone\" \
1714         }, \
1715         { \
1716             \"name\": \"Navigation\", \
1717             \"new\": \"map\" \
1718         }, \
1719         { \
1720             \"name\": \"HVAC\", \
1721             \"new\": \"hvac\" \
1722         }, \
1723         { \
1724             \"name\": \"Settings\", \
1725             \"new\": \"settings\" \
1726         }, \
1727         { \
1728             \"name\": \"Dashboard\", \
1729             \"new\": \"dashboard\" \
1730         }, \
1731         { \
1732             \"name\": \"POI\", \
1733             \"new\": \"poi\" \
1734         }, \
1735         { \
1736             \"name\": \"Mixer\", \
1737             \"new\": \"mixer\" \
1738         }, \
1739         { \
1740             \"name\": \"Restriction\", \
1741             \"new\": \"restriction\" \
1742         }, \
1743         { \
1744             \"name\": \"^OnScreen.*\", \
1745             \"new\": \"on_screen\" \
1746         } \
1747     ] \
1748 }";
1749
1750 /**
1751  * controller_hooks
1752  */
1753 void controller_hooks::surface_created(uint32_t surface_id)
1754 {
1755     this->app->surface_created(surface_id);
1756 }
1757
1758 void controller_hooks::surface_removed(uint32_t surface_id)
1759 {
1760     this->app->surface_removed(surface_id);
1761 }
1762
1763 void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
1764                                           uint32_t /*v*/) {}
1765
1766 void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,
1767                                                      uint32_t /*x*/,
1768                                                      uint32_t /*y*/,
1769                                                      uint32_t /*w*/,
1770                                                      uint32_t /*h*/) {}
1771
1772 } // namespace wm