.api = "ll-auth",
.specification = NULL,
.verbs = _ll_auth_binding_verbs,
- .preinit = ll_auth_init,
- .init = NULL,
+ .preinit = NULL,
+ .init = ll_auth_init,
.onevent = NULL,
.noconcurrency = 0
};
#
# http://www.apache.org/licenses/LICENSE-2.0
#
-# Unless required by applicabfile:///home/agl/projects/identity/hl-identity-binding/conf.d/app-templates/samples.d/CMakeLists.txt.samplele law or agreed to in writing, software
+# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
+++ /dev/null
-build/
-bower_components/
-node_modules/
-dist.prod/
-CMakeCache.txt
-Makefile
-*.so
-nbproject
-.vscode
-*.tar.gz
-.*.sw*
-_book
+++ /dev/null
-[gerrit]
-host=gerrit.automotivelinux.org
-port=29418
-project=apps/app-templates
-defaultbranch=master
+++ /dev/null
- Apache License
- Version 2.0, January 2004
- http://www.apache.org/licenses/
-
- TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
- 1. Definitions.
-
- "License" shall mean the terms and conditions for use, reproduction,
- and distribution as defined by Sections 1 through 9 of this document.
-
- "Licensor" shall mean the copyright owner or entity authorized by
- the copyright owner that is granting the License.
-
- "Legal Entity" shall mean the union of the acting entity and all
- other entities that control, are controlled by, or are under common
- control with that entity. For the purposes of this definition,
- "control" means (i) the power, direct or indirect, to cause the
- direction or management of such entity, whether by contract or
- otherwise, or (ii) ownership of fifty percent (50%) or more of the
- outstanding shares, or (iii) beneficial ownership of such entity.
-
- "You" (or "Your") shall mean an individual or Legal Entity
- exercising permissions granted by this License.
-
- "Source" form shall mean the preferred form for making modifications,
- including but not limited to software source code, documentation
- source, and configuration files.
-
- "Object" form shall mean any form resulting from mechanical
- transformation or translation of a Source form, including but
- not limited to compiled object code, generated documentation,
- and conversions to other media types.
-
- "Work" shall mean the work of authorship, whether in Source or
- Object form, made available under the License, as indicated by a
- copyright notice that is included in or attached to the work
- (an example is provided in the Appendix below).
-
- "Derivative Works" shall mean any work, whether in Source or Object
- form, that is based on (or derived from) the Work and for which the
- editorial revisions, annotations, elaborations, or other modifications
- represent, as a whole, an original work of authorship. For the purposes
- of this License, Derivative Works shall not include works that remain
- separable from, or merely link (or bind by name) to the interfaces of,
- the Work and Derivative Works thereof.
-
- "Contribution" shall mean any work of authorship, including
- the original version of the Work and any modifications or additions
- to that Work or Derivative Works thereof, that is intentionally
- submitted to Licensor for inclusion in the Work by the copyright owner
- or by an individual or Legal Entity authorized to submit on behalf of
- the copyright owner. For the purposes of this definition, "submitted"
- means any form of electronic, verbal, or written communication sent
- to the Licensor or its representatives, including but not limited to
- communication on electronic mailing lists, source code control systems,
- and issue tracking systems that are managed by, or on behalf of, the
- Licensor for the purpose of discussing and improving the Work, but
- excluding communication that is conspicuously marked or otherwise
- designated in writing by the copyright owner as "Not a Contribution."
-
- "Contributor" shall mean Licensor and any individual or Legal Entity
- on behalf of whom a Contribution has been received by Licensor and
- subsequently incorporated within the Work.
-
- 2. Grant of Copyright License. Subject to the terms and conditions of
- this License, each Contributor hereby grants to You a perpetual,
- worldwide, non-exclusive, no-charge, royalty-free, irrevocable
- copyright license to reproduce, prepare Derivative Works of,
- publicly display, publicly perform, sublicense, and distribute the
- Work and such Derivative Works in Source or Object form.
-
- 3. Grant of Patent License. Subject to the terms and conditions of
- this License, each Contributor hereby grants to You a perpetual,
- worldwide, non-exclusive, no-charge, royalty-free, irrevocable
- (except as stated in this section) patent license to make, have made,
- use, offer to sell, sell, import, and otherwise transfer the Work,
- where such license applies only to those patent claims licensable
- by such Contributor that are necessarily infringed by their
- Contribution(s) alone or by combination of their Contribution(s)
- with the Work to which such Contribution(s) was submitted. If You
- institute patent litigation against any entity (including a
- cross-claim or counterclaim in a lawsuit) alleging that the Work
- or a Contribution incorporated within the Work constitutes direct
- or contributory patent infringement, then any patent licenses
- granted to You under this License for that Work shall terminate
- as of the date such litigation is filed.
-
- 4. Redistribution. You may reproduce and distribute copies of the
- Work or Derivative Works thereof in any medium, with or without
- modifications, and in Source or Object form, provided that You
- meet the following conditions:
-
- (a) You must give any other recipients of the Work or
- Derivative Works a copy of this License; and
-
- (b) You must cause any modified files to carry prominent notices
- stating that You changed the files; and
-
- (c) You must retain, in the Source form of any Derivative Works
- that You distribute, all copyright, patent, trademark, and
- attribution notices from the Source form of the Work,
- excluding those notices that do not pertain to any part of
- the Derivative Works; and
-
- (d) If the Work includes a "NOTICE" text file as part of its
- distribution, then any Derivative Works that You distribute must
- include a readable copy of the attribution notices contained
- within such NOTICE file, excluding those notices that do not
- pertain to any part of the Derivative Works, in at least one
- of the following places: within a NOTICE text file distributed
- as part of the Derivative Works; within the Source form or
- documentation, if provided along with the Derivative Works; or,
- within a display generated by the Derivative Works, if and
- wherever such third-party notices normally appear. The contents
- of the NOTICE file are for informational purposes only and
- do not modify the License. You may add Your own attribution
- notices within Derivative Works that You distribute, alongside
- or as an addendum to the NOTICE text from the Work, provided
- that such additional attribution notices cannot be construed
- as modifying the License.
-
- You may add Your own copyright statement to Your modifications and
- may provide additional or different license terms and conditions
- for use, reproduction, or distribution of Your modifications, or
- for any such Derivative Works as a whole, provided Your use,
- reproduction, and distribution of the Work otherwise complies with
- the conditions stated in this License.
-
- 5. Submission of Contributions. Unless You explicitly state otherwise,
- any Contribution intentionally submitted for inclusion in the Work
- by You to the Licensor shall be under the terms and conditions of
- this License, without any additional terms or conditions.
- Notwithstanding the above, nothing herein shall supersede or modify
- the terms of any separate license agreement you may have executed
- with Licensor regarding such Contributions.
-
- 6. Trademarks. This License does not grant permission to use the trade
- names, trademarks, service marks, or product names of the Licensor,
- except as required for reasonable and customary use in describing the
- origin of the Work and reproducing the content of the NOTICE file.
-
- 7. Disclaimer of Warranty. Unless required by applicable law or
- agreed to in writing, Licensor provides the Work (and each
- Contributor provides its Contributions) on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
- implied, including, without limitation, any warranties or conditions
- of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
- PARTICULAR PURPOSE. You are solely responsible for determining the
- appropriateness of using or redistributing the Work and assume any
- risks associated with Your exercise of permissions under this License.
-
- 8. Limitation of Liability. In no event and under no legal theory,
- whether in tort (including negligence), contract, or otherwise,
- unless required by applicable law (such as deliberate and grossly
- negligent acts) or agreed to in writing, shall any Contributor be
- liable to You for damages, including any direct, indirect, special,
- incidental, or consequential damages of any character arising as a
- result of this License or out of the use or inability to use the
- Work (including but not limited to damages for loss of goodwill,
- work stoppage, computer failure or malfunction, or any and all
- other commercial damages or losses), even if such Contributor
- has been advised of the possibility of such damages.
-
- 9. Accepting Warranty or Additional Liability. While redistributing
- the Work or Derivative Works thereof, You may choose to offer,
- and charge a fee for, acceptance of support, warranty, indemnity,
- or other liability obligations and/or rights consistent with this
- License. However, in accepting such obligations, You may act only
- on Your own behalf and on Your sole responsibility, not on behalf
- of any other Contributor, and only if You agree to indemnify,
- defend, and hold each Contributor harmless for any liability
- incurred by, or claims asserted against, such Contributor by reason
- of your accepting any such warranty or additional liability.
-
- END OF TERMS AND CONDITIONS
-
- APPENDIX: How to apply the Apache License to your work.
-
- To apply the Apache License to your work, attach the following
- boilerplate notice, with the fields enclosed by brackets "{}"
- replaced with your own identifying information. (Don't include
- the brackets!) The text should be enclosed in the appropriate
- comment syntax for the file format. We also recommend that a
- file or class name and description of purpose be included on the
- same "printed page" as the copyright notice for easier
- identification within third-party archives.
-
- Copyright 2017 claneys
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
+++ /dev/null
-# AGL CMake template
-
-Files used to build an application, or binding, project with the
-AGL Application Framework.
-
-To build your AGL project using these templates, you have to install
-them within your project and adjust compilation option in `config.cmake`.
-For technical reasons, you also have to specify **cmake** target in
-sub CMakeLists.txt installed. Make a globbing search to find source files
-isn't recommended now to handle project build especially in a multiuser
-project because CMake will not be aware of new or removed source files.
-
-You'll find usage samples here:
-
-- [helloworld-service](https://github.com/iotbzh/helloworld-service)
-- [low-level-can-service](https://gerrit.automotivelinux.org/gerrit/apps/low-level-can-service)
-- [high-level-viwi-service](https://github.com/iotbzh/high-level-viwi-service)
-- [audio-binding](https://github.com/iotbzh/audio-binding)
-- [unicens2-binding](https://github.com/iotbzh/unicens2-binding)
-
-## Quickstart
-
-### Initialization
-
-To use these templates files on your project just install the reference files using
-**git submodule** then use `config.cmake` file to configure your project specificities :
-
-```bash
-git submodule add https://gerrit.automotivelinux.org/gerrit/p/apps/app-templates.git conf.d/app-templates
-mkdir conf.d/cmake
-cp conf.d/app-templates/cmake/config.cmake.sample conf.d/cmake/config.cmake
-```
-
-Edit the copied config.cmake file to fit your needs.
-
-Now, create your top CMakeLists.txt file which include `config.cmake` file.
-
-An example is available in **app-templates** submodule that you can copy and
-use:
-
-```bash
-cp conf.d/app-templates/cmake/CMakeLists.txt.sample CMakeLists.txt
-```
-
-### Create your CMake targets
-
-For each target part of your project, you need to use ***PROJECT_TARGET_ADD***
-to include this target to your project.
-
-Using it, make available the cmake variable ***TARGET_NAME*** until the next
-***PROJECT_TARGET_ADD*** is invoked with a new target name.
-
-So, typical usage defining a target is:
-
-```cmake
-PROJECT_TARGET_ADD(SuperExampleName) --> Adding target to your project
-
-add_executable/add_library(${TARGET_NAME}.... --> defining your target sources
-
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES.... --> fit target properties
-for macros usage
-```
-
-### Targets PROPERTIES
-
-You should set properties on your targets that will be used to package your
-apps in a widget file that could be installed on an AGL system.
-
-Specify what is the type of your targets that you want to be included in the
-widget package with the property **LABELS**:
-
-Choose between:
-
-- **BINDING**: Shared library that be loaded by the AGL Application Framework
-- **BINDINGV2**: Shared library that be loaded by the AGL Application Framework.
- This has to be accompagnied with a JSON file named like the *${OUTPUT_NAME}-apidef* of
- the target that describe the API with OpenAPI syntax (e.g: *mybinding-apidef*).
- Or you can choose the name by setting the *CACHE* cmake variable *OPENAPI_DEF*
- (***CAUTION***: setting a CACHE variable is needed, or set a normal variable
- with the *PARENT_SCOPE* option to make it visible for the parent scope
- where the target is defined) JSON file will be used to generate header file
- using `afb-genskel` tool.
-- **HTDOCS**: Root directory of a web app. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **DATA**: Resources used by your application. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **EXECUTABLE**: Entry point of your application executed by the AGL
- Application Framework
-
-> **TIP** you should use the prefix _afb-_ with your **BINDING* targets which
-> stand for **Application Framework Binding**.
-
-```cmake
-SET_TARGET_PROPERTIES(${TARGET_NAME}
- PREFIX "afb-"
- LABELS "BINDING"
- OUTPUT_NAME "file_output_name"
-)
-```
-
-> **NOTE**: You doesn't need to specify an **INSTALL** command for these
-> targets. This is already handle by template and will be installed in the
-> following path : **${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}**
-
-## More details: Typical project architecture
-
-A typical project architecture would be :
-
-```tree
-<project-root-path>
-│
-├── conf.d/
-│ ├── autobuild/
-│ │ ├── agl
-│ │ │ └── autobuild
-│ │ ├── linux
-│ │ │ └── autobuild
-│ │ └── windows
-│ │ └── autobuild
-│ ├── app-templates/
-│ │ ├── README.md
-│ │ ├── autobuild/
-│ │ │ ├── agl
-│ │ │ │ └── autobuild.in
-│ │ │ ├── linux
-│ │ │ │ └── autobuild.in
-│ │ │ └── windows
-│ │ │ └── autobuild.in
-│ │ ├── cmake/
-│ │ │ ├── config.cmake.sample
-│ │ │ ├── export.map
-│ │ │ └── macros.cmake
-│ │ ├── deb/
-│ │ │ └── config.deb.in
-│ │ ├── rpm/
-│ │ │ └── config.spec.in
-│ │ └── wgt/
-│ │ ├── config.xml.in
-│ │ ├── config.xml.in.sample
-│ │ ├── icon-default.png
-│ │ ├── icon-html5.png
-│ │ ├── icon-native.png
-│ │ ├── icon-qml.png
-│ │ └── icon-service.png
-│ ├── packaging/
-│ │ ├── config.spec
-│ │ └── config.deb
-│ ├── cmake
-│ │ └── config.cmake
-│ └── wgt
-│ └── config.xml.in
-├── <libs>
-├── <target>
-│ └── <files>
-├── <target>
-│ └── <file>
-└── <target>
- └── <files>
-```
-
-| # | Parent | Description |
-| - | -------| ----------- |
-| \<root-path\> | - | Path to your project. Hold master CMakeLists.txt and general files of your projects. |
-| conf.d | \<root-path\> | Holds needed files to build, install, debug, package an AGL app project |
-| app-templates | conf.d | Git submodule to app-templates AGL repository which provides CMake helpers macros library, and build scripts. config.cmake is a copy of config.cmake.sample configured for the projects. SHOULD NOT BE MODIFIED MANUALLY !|
-| autobuild | conf.d | Scripts generated from app-templates to build packages the same way for differents platforms.|
-| cmake | conf.d | Contains at least config.cmake file modified from the sample provided in app-templates submodule. |
-| wgt | conf.d | Contains at least config.xml.in template file modified from the sample provided in app-templates submodule for the needs of project (See config.xml.in.sample file for more details). |
-| packaging | conf.d | Contains output files used to build packages. |
-| \<libs\> | \<root-path\> | External dependencies libraries. This isn't to be used to include header file but build and link statically specifics libraries. | Library sources files. Can be a decompressed library archive file or project fork. |
-| \<target\> | \<root-path\> | A target to build, typically library, executable, etc. |
-
-### Update app-templates submodule
-
-You may have some news bug fixes or features available from app-templates
-repository that you want. To update your submodule proceed like the following:
-
-```bash
-git submodule update --remote
-git commit -s conf.d/app-templates
-```
-
-This will update the submodule to the HEAD of master branch repository.
-
-You could just want to update at a specified repository tag or branch or commit
-, here are the method to do so:
-
-```bash
-cd conf.d/app-templates
-# Choose one of the following depending what you want
-git checkout <tag_name>
-git checkout --detach <branch_name>
-git checkout --detach <commit_id>
-# Then commit
-cd ../..
-git commit -s conf.d/app-templates
-```
-
-### Build a widget
-
-#### config.xml.in file
-
-To build a widget you need a _config.xml_ file describing what is your apps and
-how Application Framework would launch it. This repo provide a simple default
-file _config.xml.in_ that should work for simple application without
-interactions with others bindings.
-
-It is recommanded that you use the sample one which is more complete. You can
-find it at the same location under the name _config.xml.in.sample_ (stunning
-isn't it). Just copy the sample file to your _conf.d/wgt_ directory and name it
-_config.xml.in_, then edit it to fit your needs.
-
-> ***CAUTION*** : The default file is only meant to be use for a
-> simple widget app, more complicated ones which needed to export
-> their api, or ship several app in one widget need to use the provided
-> _config.xml.in.sample_ which had all new Application Framework
-> features explained and examples.
-
-#### Using cmake template macros
-
-To leverage all cmake templates features, you have to specify ***properties***
-on your targets. Some macros will not works without specifying which is the
-target type.
-
-As the type is not always specified for some custom targets, like an ***HTML5***
-application, macros make the difference using ***LABELS*** property.
-
-Choose between:
-
-- **BINDING**: Shared library that be loaded by the AGL Application Framework
-- **BINDINGV2**: Shared library that be loaded by the AGL Application Framework.
- This has to be accompagnied with a JSON file named like the *${OUTPUT_NAME}-apidef* of
- the target that describe the API with OpenAPI syntax (e.g: *mybinding-apidef*).
- Or you can choose the name by setting the *CACHE* cmake variable *OPENAPI_DEF*
- (***CAUTION***: setting a CACHE variable is needed, or set a normal variable
- with the *PARENT_SCOPE* option to make it visible for the parent scope
- where the target is defined) JSON file will be used to generate header file
- using `afb-genskel` tool.
-- **HTDOCS**: Root directory of a web app. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **DATA**: Resources used by your application. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **EXECUTABLE**: Entry point of your application executed by the AGL
- Application Framework
-
-> **TIP** you should use the prefix _afb-_ with your **BINDING* targets which
-> stand for **Application Framework Binding**.
-
-Example:
-
-```cmake
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES
- LABELS "HTDOCS"
- OUTPUT_NAME dist.prod
- )
-```
-
-> **NOTE**: You doesn't need to specify an **INSTALL** command for these
-> targets. This is already handle by template and will be installed in the
-> following path : **${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}**
-
-## Macro reference
-
-### PROJECT_TARGET_ADD
-
-Typical usage would be to add the target to your project using macro
-`PROJECT_TARGET_ADD` with the name of your target as parameter.
-
-Example:
-
-```cmake
-PROJECT_TARGET_ADD(low-can-demo)
-```
-
-> ***NOTE***: This will make available the variable `${TARGET_NAME}`
-> set with the specificied name. This variable will change at the next call
-> to this macros.
-
-### project_subdirs_add
-
-This macro will search in all subfolder any `CMakeLists.txt` file. If found then
-it will be added to your project. This could be use in an hybrid application by
-example where the binding lay in a sub directory.
-
-Usage :
-
-```cmake
-project_subdirs_add()
-```
-
-You also can specify a globbing pattern as argument to filter which folders
-will be looked for.
-
-To filter all directories that begin with a number followed by a dash the
-anything:
-
-```cmake
-project_subdirs_add("[0-9]-*")
-```
-
-## Advanced customization
-
-### Including additionnals cmake files
-
-#### Machine and system custom cmake files
-
-Advanced tuning is possible using addionnals cmake files that are included
-automatically from some specifics locations. They are included in that order:
-
-- Project CMake files normaly located in _<project-root-path>/conf.d/app-templates/cmake/cmake.d_
-- Home CMake files located in _$HOME/.config/app-templates/cmake.d_
-- System CMake files located in _/etc/app-templates/cmake.d_
-
-CMake files has to be named using the following convention: `XX-common*.cmake`
-or `XX-${PROJECT_NAME}*.cmake`, where `XX` are numbers, `*` file name
-(ie. `99-common-my_customs.cmake`).
-
-> **NOTE** You need to specify after numbers that indicate include order, to
-which project that file applies, if it applies to all project then use keyword
-`common`.
-
-So, saying that you should be aware that every normal cmake variables used at
-project level could be overwrited by home or system located cmake files if
-variables got the same name. Exceptions are cached variables set using
-**CACHE** keyword:
-
-Example:
-
-```cmake
-set(VARIABLE_NAME 'value string random' CACHE STRING 'docstring')
-```
-
-#### OS custom cmake files
-
-This is meant to personalize the project depending on the OS your are using.
-At the end of config.cmake, common.cmake will include lot of cmake file to
-customize project build depending on your plateform. It will detect your OS
-deducing it from file _/etc/os-release_ now as default in almost all Linux
-distribution.
-
-So you can use the value of field **ID_LIKE** or **ID** if the
-first one doesn't exists and add a cmake file for that distribution in your
-_conf.d/cmake/_ directory or relatively to your _app-templates_ submodule path
-_app-templates/../cmake/_
-
-Those files has to be named use the following scheme _XX-${OSRELEASE}*.cmake_
-where _XX_ are numbers, ${OSRELEASE} the **ID_LIKE** or **ID** field from
-_/etc/os-release_ file.
-
-### Include customs templated scripts
-
-As well as for additionnals cmake files you can include your own templated
-scripts that will be passed to cmake command `configure_file`.
-
-Just create your own script to the following directories:
-
-- Home location in _$HOME/.config/app-templates/scripts_
-- System location in _/etc/app-templates/scripts_
-
-Scripts only needs to use the extension `.in` to be parsed and configured by
-CMake command.
-
-## Autobuild script usage
-
-### Generation
-
-To be integrated in the Yocto build workflow you have to generate `autobuild`
-scripts using _autobuild_ target.
-
-To generate those scripts proceeds:
-
-```bash
-mkdir -p build
-cd build
-cmake .. && make autobuild
-```
-
-You should see _conf.d/autobuild/agl/autobuild_ file now.
-
-### Available targets
-
-Here are the available targets available from _autobuild_ scripts:
-
-- **clean** : clean build directory from object file and targets results.
-- **distclean** : delete build directory
-- **configure** : generate project Makefile from CMakeLists.txt files.
-- **build** : compile all project targets.
-- **package** : build and output a wgt package.
-
-You can specify variables that modify the behavior of compilation using
-the following variables:
-
-- **CONFIGURE_ARGS** : Variable used at **configure** time.
-- **BUILD_ARGS** : Variable used at **build** time.
-- **DEST** : Directory where to output ***wgt*** file.
-
-Variable as to be in CMake format. (ie: BUILD_ARGS="-DC_FLAGS='-g -O2'")
-
-Usage example:
-
-```bash
-./conf.d/autobuild/wgt/autobuild package DEST=/tmp
-```
+++ /dev/null
-{
- "title": "CMake Application templates",
- "subtitle": "Developer Documentation",
- "description": "CMake templates used to build an AGL apps and widget",
- "keywords": "AGL, Development, Iotbzh",
- "author": "IoT.Bzh Team",
- "website": "http://iot.bzh",
- "published": "July 2017",
- "version": "1.0",
-
- "gitbook": "3.2.2",
- "root": "docs",
- "pdf": {
- "fontFamily": "Verdana",
- "fontSize": 12,
- "paperSize": "a4",
- "pageBreaksBefore": "//h:div[@class=\"page-break\"]"
- },
- "styles": {
- "website": "resources/ebook.css",
- "ebook": "resources/ebook.css",
- "pdf": "resources/ebook.css"
- },
-
- "hidepageheaders": [2, 3],
- "hidepagefooters": [2, 3],
-
- "plugins": [
- "regexplace"
- ],
- "pluginsConfig": {
- "regexplace": {
- "removeFirstPartsInSectionNumber": true,
- "substitutes": [{
- "pattern": "<!-- pagebreak -->",
- "flags": "g",
- "substitute": "<div class=\"page-break\"></div>"
- },
- {
- "pattern": "<!-- clear -->",
- "flags": "g",
- "substitute": "<div class=\"clear\"></div>"
- },
- {
- "pattern": "<!-- nopagebreak -->",
- "flags": "g",
- "substitute": "<div class=\"nopb\">"
- },
- {
- "pattern": "<!-- endnopagebreak -->",
- "flags": "g",
- "substitute": "</div>"
- },
- {
- "pattern": "<!-- note -->",
- "flags": "g",
- "substitute": "<div class=\"note\">"
- },
- {
- "pattern": "<!-- endnote -->",
- "flags": "g",
- "substitute": "</div>"
- },
- {
- "pattern": "!\\[(.*?)\\]\\((.*?)(?:\\s+\"(.*)\")?\\){0,}{caption=1([^\\}]*)}",
- "flags": "gmi",
- "substitute": "<figure id=\"fig_PAGE_LEVEL_._INDEX_\"><img $3 alt=\"$1\" title=\"$1\" href=\"$2\"><figcaption></figcaption></figure>",
- "decode": true
- },
- {
- "pattern": "<img ([^>]*) {0,}\/{0,}> {0,}{caption=1([^\\}]*)}",
- "flags": "g",
- "substitute": "<figure id=\"fig_PAGE_LEVEL_._INDEX_\"><img $2 $1><figcaption></figcaption></figure>",
- "decode": true
- },
- {
- "pattern": "<img (.*)alt=\"([^\"]*)\"(.*) {0,1}\/{0,1}><figcaption></figcaption>",
- "flags": "g",
- "substitute": "<img$1alt=\"$2\"$3><figcaption><span>Picture _PAGE_LEVEL_._INDEX_</span>: $2</figcaption>",
- "store": {
- "substitute": "<a href=\"_PAGE_PATH_#fig_PAGE_LEVEL_._INDEX_\">Pic. _PAGE_LEVEL_._INDEX_</a> <span>$2</span>",
- "variable_name": "pictures"
- }
- },
- {
- "pattern": "<img ([^>]*)> {0,}{style {1,}([^}]*)}",
- "flags": "g",
- "substitute": "<img $1 style=\"$2\">",
- "decode": true
- }
- ]
- }
- }
-}
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-#--------------------------------------------------------------------------
-# WARNING:
-# Do not change this cmake template
-# Customise your preferences in "./conf.d/cmake/config.cmake"
-#--------------------------------------------------------------------------
-
-# (BUG!!!) as PKG_CONFIG_PATH does not work [should be en env variable]
-set(PKG_CONFIG_USE_CMAKE_PREFIX_PATH ON CACHE BOOLEAN "Flag for using prefix path")
-
-INCLUDE(FindPkgConfig)
-INCLUDE(CheckIncludeFiles)
-INCLUDE(CheckLibraryExists)
-INCLUDE(GNUInstallDirs)
-
-set(CMAKE_BUILD_TYPE Debug CACHE STRING "the type of build")
-set(CMAKE_POSITION_INDEPENDENT_CODE ON)
-set(CMP0048 1)
-
-# Default compilation options
-############################################################################
-link_libraries(-Wl,--as-needed -Wl,--gc-sections)
-set(COMPILE_OPTIONS -Wall -Wextra -Wconversion -Wno-unused-parameter -Wno-sign-compare -Wno-sign-conversion -Werror=maybe-uninitialized -Werror=implicit-function-declaration -ffunction-sections -fdata-sections -fPIC CACHE STRING "Compilation flags")
-foreach(option ${COMPILE_OPTIONS})
- add_compile_options($<$<CONFIG:PROFILING>:${option}>)
-endforeach()
-
-# Compilation OPTIONS depending on language
-#########################################
-foreach(option ${COMPILE_OPTIONS})
- add_compile_options(${option})
-endforeach()
-foreach(option ${C_COMPILE_OPTIONS})
- add_compile_options($<$<COMPILE_LANGUAGE:C>:${option}>)
-endforeach()
-foreach(option ${CXX_COMPILE_OPTIONS})
- add_compile_options($<$<COMPILE_LANGUAGE:CXX>:${option}>)
-endforeach()
-
-# Compilation option depending on CMAKE_BUILD_TYPE
-##################################################
-set(PROFILING_COMPILE_OPTIONS -g -O0 -pg -Wp,-U_FORTIFY_SOURCE CACHE STRING "Compilation flags for PROFILING build type.")
-set(DEBUG_COMPILE_OPTIONS -g -ggdb -Wp,-U_FORTIFY_SOURCE CACHE STRING "Compilation flags for DEBUG build type.")
-set(CCOV_COMPILE_OPTIONS -g -O2 --coverage CACHE STRING "Compilation flags for CCOV build type.")
-set(RELEASE_COMPILE_OPTIONS -g -O2 CACHE STRING "Compilation flags for RELEASE build type.")
-foreach(option ${PROFILING_COMPILE_OPTIONS})
- add_compile_options($<$<CONFIG:PROFILING>:${option}>)
-endforeach()
-foreach(option ${DEBUG_COMPILE_OPTIONS})
- add_compile_options($<$<CONFIG:PROFILING>:${option}>)
-endforeach()
-foreach(option ${CCOV_COMPILE_OPTIONS})
- add_compile_options($<$<CONFIG:PROFILING>:${option}>)
-endforeach()
-foreach(option ${RELEASE_COMPILE_OPTIONS})
- add_compile_options($<$<CONFIG:PROFILING>:${option}>)
-endforeach()
-
-# Env variable overload default
-# Disabled by default now. Tell me if you need really it
-# but you should not have needs for that since you can
-# set CMAKE_INSTALL_PREFIX in your config.cmake.
-#if(DEFINED ENV{INSTALL_PREFIX})
-# set(INSTALL_PREFIX $ENV{INSTALL_PREFIX} CACHE PATH "The path where to install")
-#else()
-# set(INSTALL_PREFIX "${CMAKE_SOURCE_DIR}/Install" CACHE PATH "The path where to install")
-#endif()
-#set(CMAKE_INSTALL_PREFIX ${INSTALL_PREFIX} CACHE PATH "Installation Prefix")
-
-# Loop on required package and add options
-foreach (PKG_CONFIG ${PKG_REQUIRED_LIST})
- string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG})
- PKG_CHECK_MODULES(${XPREFIX} REQUIRED ${PKG_CONFIG})
-
- INCLUDE_DIRECTORIES(${${XPREFIX}_INCLUDE_DIRS})
- list(APPEND link_libraries ${${XPREFIX}_LDFLAGS})
- add_compile_options (${${XPREFIX}_CFLAGS})
-endforeach(PKG_CONFIG)
-
-# Optional LibEfence Malloc debug library
-IF(CMAKE_BUILD_TYPE MATCHES DEBUG)
-CHECK_LIBRARY_EXISTS(efence malloc "" HAVE_LIBEFENCE)
-IF(HAVE_LIBEFENCE)
- MESSAGE(STATUS "Linking with ElectricFence for debugging purposes...")
- SET(libefence_LIBRARIES "-lefence")
- list (APPEND link_libraries ${libefence_LIBRARIES})
-ENDIF(HAVE_LIBEFENCE)
-ENDIF(CMAKE_BUILD_TYPE MATCHES DEBUG)
-
-# set default include directories
-INCLUDE_DIRECTORIES(${EXTRA_INCLUDE_DIRS})
-
-# Default Linkflag
-set (PKG_TEMPLATE_PREFIX ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR} CACHE PATH "Default Package Templates Directory")
-if(NOT BINDINGS_LINK_FLAG)
- set(BINDINGS_LINK_FLAG "-Wl,--version-script=${PKG_TEMPLATE_PREFIX}/cmake/export.map")
-endif()
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-#--------------------------------------------------------------------------
-# WARNING:
-# Do not change this cmake template
-# Customise your preferences in "./etc/config.cmake"
-#--------------------------------------------------------------------------
-
-# Get colorized message output non Windows OS. You know bash ? :)
-if(NOT WIN32)
- string(ASCII 27 Esc)
- set(ColourReset "${Esc}[m")
- set(ColourBold "${Esc}[1m")
- set(Red "${Esc}[31m")
- set(Green "${Esc}[32m")
- set(Yellow "${Esc}[33m")
- set(Blue "${Esc}[34m")
- set(Magenta "${Esc}[35m")
- set(Cyan "${Esc}[36m")
- set(White "${Esc}[37m")
- set(BoldRed "${Esc}[1;31m")
- set(BoldGreen "${Esc}[1;32m")
- set(BoldYellow "${Esc}[1;33m")
- set(BoldBlue "${Esc}[1;34m")
- set(BoldMagenta "${Esc}[1;35m")
- set(BoldCyan "${Esc}[1;36m")
- set(BoldWhite "${Esc}[1;37m")
-endif()
-
-# Native packaging name
-set(NPKG_PROJECT_NAME agl-${PROJECT_NAME})
-
-string(REGEX MATCH "[0-9]+" LINUX_VERSION_CODE ${LINUX_VERSION_CODE_LINE})
-math(EXPR a "${LINUX_VERSION_CODE} >> 16")
-math(EXPR b "(${LINUX_VERSION_CODE} >> 8) & 255")
-math(EXPR c "(${LINUX_VERSION_CODE} & 255)")
-
-set(KERNEL_VERSION "${a}.${b}.${c}")
-
-# Include project configuration
-# ------------------------------
-project(${PROJECT_NAME} VERSION ${PROJECT_VERSION} LANGUAGES ${PROJECT_LANGUAGES})
-set(PROJECT_LIBDIR "${CMAKE_SOURCE_DIR}/libs" CACHE PATH "Subpath to libraries")
-set(PROJECT_RESOURCES "${CMAKE_SOURCE_DIR}/data" CACHE PATH "Subpath to data")
-
-set(AFB_TOKEN "" CACHE PATH "Default AFB_TOKEN")
-set(AFB_REMPORT "1234" CACHE PATH "Default AFB_TOKEN")
-
-# Check GCC minimal version
-if (gcc_minimal_version)
-message (STATUS "${Cyan}-- Check gcc_minimal_version (found gcc version ${CMAKE_C_COMPILER_VERSION}) \
-(found g++ version ${CMAKE_CXX_COMPILER_VERSION})${ColourReset}")
-if (CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${gcc_minimal_version} OR CMAKE_C_COMPILER_VERSION VERSION_LESS ${gcc_minimal_version})
-message(FATAL_ERROR "${Red}**** FATAL: Require at least gcc-${gcc_minimal_version} please set CMAKE_C[XX]_COMPILER")
-endif()
-endif(gcc_minimal_version)
-
-# Check Kernel mandatory version, will fail the configuration if required version not matched.
-if (kernel_mandatory_version)
-message (STATUS "${Cyan}-- Check kernel_mandatory_version (found kernel version ${KERNEL_VERSION})${ColourReset}")
-if (KERNEL_VERSION VERSION_LESS ${kernel_mandatory_version})
-message(FATAL_ERROR "${Red}**** FATAL: Require at least ${kernel_mandatory_version} please use a recent kernel or source your SDK environment then clean and reconfigure your CMake project.")
-endif (KERNEL_VERSION VERSION_LESS ${kernel_mandatory_version})
-endif(kernel_mandatory_version)
-
-# Check Kernel minimal version just print a Warning about missing features
-# and set a definition to be used as preprocessor condition in code to disable
-# incompatibles features.
-if (kernel_minimal_version)
-message (STATUS "${Cyan}-- Check kernel_minimal_version (found kernel version ${KERNEL_VERSION})${ColourReset}")
-if (KERNEL_VERSION VERSION_LESS ${kernel_minimal_version})
-message(WARNING "${Yellow}**** Warning: Some feature(s) require at least ${kernel_minimal_version}. Please use a recent kernel or source your SDK environment then clean and reconfigure your CMake project.${ColourReset}")
-else (KERNEL_VERSION VERSION_LESS ${kernel_minimal_version})
-add_definitions(-DKERNEL_MINIMAL_VERSION_OK)
-endif (KERNEL_VERSION VERSION_LESS ${kernel_minimal_version})
-endif(kernel_minimal_version)
-
-# Project path variables
-# ----------------------
-set(PKGOUT_DIR package CACHE PATH "Output directory for packages")
-
-# Define a default package directory
-if(PKG_PREFIX)
- set(PROJECT_PKG_BUILD_DIR ${PKG_PREFIX}/${PKGOUT_DIR} CACHE PATH "Application contents to be packaged")
-else()
- set(PROJECT_PKG_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/${PKGOUT_DIR} CACHE PATH "Application contents to be packaged")
-endif()
-
-# Paths to templates files
-set(TEMPLATE_DIR "${PKG_TEMPLATE_PREFIX}/template.d" CACHE PATH "Subpath to a directory where are stored needed files to launch on remote target to debuging purposes")
-
-string(REGEX REPLACE "^(.*)/.*$" "\\1" ENTRY_POINT "${PKG_TEMPLATE_PREFIX}")
-set(PROJECT_PKG_ENTRY_POINT ${ENTRY_POINT}/packaging CACHE PATH "Where package build files, like rpm.spec file or config.xml, are write.")
-
-set(WIDGET_ICON "${ENTRY_POINT}/wgt/${PROJECT_ICON}" CACHE PATH "Path to the widget icon")
-set(WIDGET_CONFIG_TEMPLATE ${TEMPLATE_DIR}/config.xml.in CACHE PATH "Path to widget config file template (config.xml.in)")
-
-# Path to autobuild template
-set(PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR ${CMAKE_SOURCE_DIR}/conf.d/autobuild/agl CACHE PATH "Subpath to a directory where are stored autobuild script")
-set(PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR ${CMAKE_SOURCE_DIR}/conf.d/autobuild/linux CACHE PATH "Subpath to a directory where are stored autobuild script")
-
-# Archive target variables
-set(ARCHIVE_OUTPUT_ARCHIVE ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}_${PROJECT_VERSION}.orig.tar)
-set(ARCHIVE_OUTPUT ${ARCHIVE_OUTPUT_ARCHIVE}.gz)
-set(TMP_ARCHIVE_SUBMODULE ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}-sub)
-set(CMD_ARCHIVE_SUBMODULE \'git archive --verbose --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/$$path/ --format tar HEAD --output ${TMP_ARCHIVE_SUBMODULE}-$$sha1.tar\' )
-
-if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
- # build deb spec file from template
- set(PACKAGING_DEB_OUTPUT_DSC ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.dsc)
- set(PACKAGING_DEB_OUTPUT_INSTALL ${PROJECT_PKG_ENTRY_POINT}/debian.${NPKG_PROJECT_NAME}.install)
- set(PACKAGING_DEB_OUTPUT_CHANGELOG ${PROJECT_PKG_ENTRY_POINT}/debian.changelog)
- set(PACKAGING_DEB_OUTPUT_COMPAT ${PROJECT_PKG_ENTRY_POINT}/debian.compat)
- set(PACKAGING_DEB_OUTPUT_CONTROL ${PROJECT_PKG_ENTRY_POINT}/debian.control)
- set(PACKAGING_DEB_OUTPUT_RULES ${PROJECT_PKG_ENTRY_POINT}/debian.rules)
-endif()
-
-# Break After Binding are loaded but before they get initialised
-set(GDB_INITIAL_BREAK "personality" CACHE STRING "Initial Break Point for GDB remote")
-
-# Define some checker binaries to verify input DATA files
-# to be included in package. Schema aren't checked for now.
-# Dummy checker about JSON.
-set(LUA_CHECKER "luac" "-p" CACHE STRING "LUA compiler")
-set(XML_CHECKER "xmllint" CACHE STRING "XML linter")
-set(JSON_CHECKER "echo" CACHE STRING "JSON linter")
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-#--------------------------------------------------------------------------
-# WARNING:
-# Do not change this cmake template
-# Customise your preferences in "./conf.d/cmake/config.cmake"
-#--------------------------------------------------------------------------
-# CMake 3.6 imported macros to simulate list(FILTER ...) subcommand
-# -----------------------
-MACRO(PARSE_ARGUMENTS prefix arg_names option_names)
-SET(DEFAULT_ARGS)
-FOREACH(arg_name ${arg_names})
- SET(${prefix}_${arg_name})
-ENDFOREACH(arg_name)
-FOREACH(option ${option_names})
- SET(${prefix}_${option} FALSE)
-ENDFOREACH(option)
-
-SET(current_arg_name DEFAULT_ARGS)
-SET(current_arg_list)
-FOREACH(arg ${ARGN})
- LIST_CONTAINS(is_arg_name ${arg} ${arg_names})
- IF (is_arg_name)
- SET(${prefix}_${current_arg_name} ${current_arg_list})
- SET(current_arg_name ${arg})
- SET(current_arg_list)
- ELSE (is_arg_name)
- LIST_CONTAINS(is_option ${arg} ${option_names})
- IF (is_option)
- SET(${prefix}_${arg} TRUE)
- ELSE (is_option)
- SET(current_arg_list ${current_arg_list} ${arg})
- ENDIF (is_option)
- ENDIF (is_arg_name)
-ENDFOREACH(arg)
-SET(${prefix}_${current_arg_name} ${current_arg_list})
-ENDMACRO(PARSE_ARGUMENTS)
-
-MACRO(LIST_CONTAINS var value)
-SET(${var})
-FOREACH (value2 ${ARGN})
- IF (${value} STREQUAL ${value2})
- SET(${var} TRUE)
- ENDIF (${value} STREQUAL ${value2})
-ENDFOREACH (value2)
-ENDMACRO(LIST_CONTAINS)
-
-MACRO(LIST_FILTER)
-PARSE_ARGUMENTS(LIST_FILTER "OUTPUT_VARIABLE" "" ${ARGV})
-# Check arguments.
-LIST(LENGTH LIST_FILTER_DEFAULT_ARGS LIST_FILTER_default_length)
-IF(${LIST_FILTER_default_length} EQUAL 0)
- MESSAGE(FATAL_ERROR "LIST_FILTER: missing list variable.")
-ENDIF(${LIST_FILTER_default_length} EQUAL 0)
-IF(${LIST_FILTER_default_length} EQUAL 1)
- MESSAGE(FATAL_ERROR "LIST_FILTER: missing regular expression variable.")
-ENDIF(${LIST_FILTER_default_length} EQUAL 1)
-# Reset output variable
-IF(NOT LIST_FILTER_OUTPUT_VARIABLE)
- SET(LIST_FILTER_OUTPUT_VARIABLE "LIST_FILTER_internal_output")
-ENDIF(NOT LIST_FILTER_OUTPUT_VARIABLE)
-SET(${LIST_FILTER_OUTPUT_VARIABLE})
-# Extract input list from arguments
-LIST(GET LIST_FILTER_DEFAULT_ARGS 0 LIST_FILTER_input_list)
-LIST(REMOVE_AT LIST_FILTER_DEFAULT_ARGS 0)
-FOREACH(LIST_FILTER_item ${${LIST_FILTER_input_list}})
- FOREACH(LIST_FILTER_regexp_var ${LIST_FILTER_DEFAULT_ARGS})
- FOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
- IF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
- LIST(APPEND ${LIST_FILTER_OUTPUT_VARIABLE} ${LIST_FILTER_item})
- ENDIF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
- ENDFOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
- ENDFOREACH(LIST_FILTER_regexp_var)
-ENDFOREACH(LIST_FILTER_item)
-# If OUTPUT_VARIABLE is not specified, overwrite the input list.
-IF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
- SET(${LIST_FILTER_input_list} ${${LIST_FILTER_OUTPUT_VARIABLE}})
-ENDIF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
-ENDMACRO(LIST_FILTER)
-
-# Generic useful macro
-# -----------------------
-macro(PROJECT_TARGET_ADD TARGET_NAME)
- set_property(GLOBAL APPEND PROPERTY PROJECT_TARGETS ${TARGET_NAME})
- set(TARGET_NAME ${TARGET_NAME})
-endmacro(PROJECT_TARGET_ADD)
-
-macro(PROJECT_PKGDEP_ADD PKG_NAME)
- set_property(GLOBAL APPEND PROPERTY PROJECT_PKG_DEPS ${PKG_NAME})
-endmacro(PROJECT_PKGDEP_ADD)
-
-macro(defstr name value)
- add_definitions(-D${name}=${value})
-endmacro(defstr)
-
-macro(configure_files_in_dir dir)
- file(GLOB filelist "${dir}/*in")
- foreach(file ${filelist})
- get_filename_component(filename ${file} NAME)
- string(REGEX REPLACE "target" "${RSYNC_TARGET}" destinationfile ${filename})
- string(REGEX REPLACE ".in$" "" destinationfile ${destinationfile})
- configure_file(${file} ${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile})
- set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile}")
- endforeach()
-endmacro(configure_files_in_dir)
-
-# Create custom target dedicated for HTML5 and DATA AGL target type
-macro(add_input_files INPUT_FILES)
- if(NOT DEFINED XML_FILES)
- set(ext_reg "xml$")
- set(XML_LIST ${INPUT_FILES})
- list_filter(XML_LIST ext_reg)
- endif()
- if(NOT DEFINED LUA_LIST)
- set(ext_reg "lua$")
- set(LUA_LIST ${INPUT_FILES})
- list_filter(LUA_LIST ext_reg)
- endif()
- if(NOT DEFINED JSON_FILES)
- set(ext_reg "json$")
- set(JSON_LIST ${INPUT_FILES})
- list_filter(JSON_LIST ext_reg)
- endif()
-
- # These are v3.6 subcommand. Not used as default for now as
- # many dev use Ubuntu 16.04 which have only 3.5 version
- #list(FILTER XML_LIST INCLUDE REGEX "xml$")
- #list(FILTER LUA_LIST INCLUDE REGEX "lua$")
- #list(FILTER JSON_LIST INCLUDE REGEX "json$")
-
- add_custom_target(${TARGET_NAME} ALL
- DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
- )
-
- foreach(file ${XML_LIST})
- add_custom_command(TARGET ${TARGET_NAME}
- PRE_BUILD
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- COMMAND ${XML_CHECKER} ${file}
- )
- endforeach()
- foreach(file ${LUA_LIST})
- add_custom_command(TARGET ${TARGET_NAME}
- PRE_BUILD
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- COMMAND ${LUA_CHECKER} ${file}
- )
- endforeach()
- foreach(file ${JSON_LIST})
- add_custom_command(TARGET ${TARGET_NAME}
- PRE_BUILD
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- COMMAND cat ${file} | ${JSON_CHECKER}
- )
- endforeach()
-
- add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
- DEPENDS ${INPUT_FILES}
- COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
- COMMAND touch ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
- COMMAND cp -r ${INPUT_FILES} ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
- )
-endmacro()
-
-# Set the name of the OPENAPI definition JSON file for binding v2
-macro(set_openapi_filename openapi_filename)
- set(OPENAPI_DEF ${openapi_filename} CACHE STRING "OpenAPI JSON file name used to generate binding header file before building a binding v2 target.")
-endmacro()
-
-# Pre-packaging
-macro(project_targets_populate)
- # Default Widget default directory
- set(BINDIR bin)
- set(ETCDIR etc)
- set(LIBDIR lib)
- set(HTTPDIR htdocs)
- set(DATADIR data)
- set(PACKAGE_BINDIR ${PROJECT_PKG_BUILD_DIR}/${BINDIR})
- set(PACKAGE_ETCDIR ${PROJECT_PKG_BUILD_DIR}/${ETCDIR})
- set(PACKAGE_LIBDIR ${PROJECT_PKG_BUILD_DIR}/${LIBDIR})
- set(PACKAGE_HTTPDIR ${PROJECT_PKG_BUILD_DIR}/${HTTPDIR})
- set(PACKAGE_DATADIR ${PROJECT_PKG_BUILD_DIR}/${DATADIR})
-
- add_custom_command(OUTPUT ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR}
- COMMAND mkdir -p ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})
- add_custom_target(populate DEPENDS ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})
-
- INSTALL(CODE "execute_process(COMMAND make populate)")
- INSTALL(DIRECTORY ${PROJECT_PKG_BUILD_DIR}/
- DESTINATION ${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}
- )
-
- get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
- foreach(TARGET ${PROJECT_TARGETS})
- get_target_property(T ${TARGET} LABELS)
- if(T)
- # Declaration of a custom command that will populate widget tree with the target
- set(POPULE_PACKAGE_TARGET "project_populate_${TARGET}")
-
- get_target_property(P ${TARGET} PREFIX)
- get_target_property(BD ${TARGET} BINARY_DIR)
- get_target_property(SD ${TARGET} SOURCE_DIR)
- get_target_property(OUT ${TARGET} OUTPUT_NAME)
-
- if(P MATCHES "NOTFOUND$")
- if (${T} STREQUAL "BINDING")
- set(P "lib")
- else()
- set(P "")
- endif()
- endif()
-
- if(${T} STREQUAL "BINDING")
- list(APPEND BINDINGS_LIST "${P}${OUT}")
- add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
- DEPENDS ${BD}/${P}${OUT}.so
- COMMAND mkdir -p ${PACKAGE_LIBDIR}
- COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
- )
- add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- elseif(${T} STREQUAL "BINDINGV2")
- if (OPENAPI_DEF)
- add_custom_command(OUTPUT ${SD}/${OPENAPI_DEF}.h
- DEPENDS ${SD}/${OPENAPI_DEF}.json
- COMMAND afb-genskel ${SD}/${OPENAPI_DEF}.json > ${SD}/${OPENAPI_DEF}.h
- )
- add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OPENAPI_DEF}.h
- COMMENT "Generating OpenAPI header file ${OPENAPI_DEF}.h")
- add_dependencies(${TARGET} "${TARGET}_GENSKEL")
- else()
- add_custom_command(OUTPUT ${SD}/${OUT}-apidef.h
- DEPENDS ${SD}/${OUT}-apidef.json
- COMMAND afb-genskel ${SD}/${OUT}-apidef.json > ${SD}/${OUT}-apidef.h
- )
- add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OUT}-apidef.h
- COMMENT "Generating OpenAPI header file ${OUT}-apidef.h")
- add_dependencies(${TARGET} "${TARGET}_GENSKEL")
- endif()
-
- add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
- DEPENDS ${BD}/${P}${OUT}.so
- COMMAND mkdir -p ${PACKAGE_LIBDIR}
- COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
- )
- add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- elseif(${T} STREQUAL "EXECUTABLE")
- add_custom_command(OUTPUT ${PACKAGE_BINDIR}/${P}${OUT}
- DEPENDS ${BD}/${P}${OUT}
- COMMAND mkdir -p ${PACKAGE_BINDIR}
- COMMAND cp ${BD}/${P}${OUT} ${PACKAGE_BINDIR}
- )
- add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_BINDIR}/${P}${OUT})
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- elseif(${T} STREQUAL "HTDOCS")
- add_custom_command(OUTPUT ${PACKAGE_HTTPDIR}-xx
- DEPENDS ${BD}/${P}${OUT}
- COMMAND mkdir -p ${PACKAGE_HTTPDIR}
- COMMAND touch ${PACKAGE_HTTPDIR}
- COMMAND cp -r ${BD}/${P}${OUT}/* ${PACKAGE_HTTPDIR}
- )
- add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_HTTPDIR}-xx)
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- elseif(${T} STREQUAL "DATA")
- # Generate list of output files instead of just one output directory
- get_target_property(SF ${TARGET} SOURCES)
- foreach(file ${SF})
- get_filename_component(JUST_FILENAME ${file} NAME)
- list(APPEND OUTPUT_FILES ${PACKAGE_DATADIR}/${JUST_FILENAME})
- endforeach()
- add_custom_target(${POPULE_PACKAGE_TARGET})
- add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
- POST_BUILD
- COMMAND mkdir -p ${PACKAGE_DATADIR}
- COMMAND touch ${PACKAGE_DATADIR}
- COMMAND cp -r ${BD}/${TARGET} ${PACKAGE_DATADIR}
- )
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- elseif(${T} STREQUAL "BINDING-CONFIG")
- # Generate list of output files instead of just one output directory
- get_target_property(SF ${TARGET} SOURCES)
- foreach(file ${SF})
- get_filename_component(JUST_FILENAME ${file} NAME)
- list(APPEND OUTPUT_FILES ${PACKAGE_ETCDIR}/${JUST_FILENAME})
- endforeach()
- add_custom_target(${POPULE_PACKAGE_TARGET})
- add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
- POST_BUILD
- COMMAND mkdir -p ${PACKAGE_ETCDIR}
- COMMAND touch ${PACKAGE_ETCDIR}
- COMMAND cp -r ${BD}/${TARGET} ${PACKAGE_ETCDIR}
- )
- add_dependencies(populate ${POPULE_PACKAGE_TARGET})
- add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
- endif(${T} STREQUAL "BINDING")
- elseif(${CMAKE_BUILD_TYPE} MATCHES "[Dd][Ee][Bb][Uu][Gg]")
- MESSAGE("${Yellow}.. Warning: ${TARGET} ignored when packaging.${ColourReset}")
- endif()
- endforeach()
-endmacro(project_targets_populate)
-
-macro(remote_targets_populate)
- if (DEFINED ENV{RSYNC_TARGET})
- set (RSYNC_TARGET $ENV{RSYNC_TARGET})
- endif()
- if (DEFINED ENV{RSYNC_PREFIX})
- set (RSYNC_PREFIX $ENV{RSYNC_PREFIX})
- endif()
-
- set(
- REMOTE_LAUNCH "Test on target with: ${CMAKE_CURRENT_BINARY_DIR}/target/start-on-${RSYNC_TARGET}.sh"
- CACHE STRING "Command to start ${PROJECT_NAME} on remote target ${RSYNC_TARGET}"
- )
-
- if(NOT RSYNC_TARGET OR NOT RSYNC_PREFIX)
- message ("${Yellow}.. Warning: RSYNC_TARGET RSYNC_PREFIX not defined 'make remote-target-populate' not instanciated${ColourReset}")
- add_custom_target(remote-target-populate
- COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make remote-target-populate'${ColourReset}"
- COMMAND exit -1
- )
- else()
- set(BINDINGS_REGEX "not_set")
- if(DEFINED BINDINGS_LIST)
- list(LENGTH BINDINGS_LIST BINDINGS_LIST_LENGTH)
- if(BINDINGS_LIST_LENGTH EQUAL 1)
- list(GET BINDINGS_LIST 0 BINDINGS_REGEX)
- string(APPEND BINDINGS_REGEX ".so")
- elseif(BINDINGS_LIST_LENGTH GREATER 1)
- foreach(B IN LISTS BINDINGS_LIST)
- STRING(APPEND BINDINGS_STR "${B}|")
- endforeach()
- STRING(REGEX REPLACE "^(.*)\\|$" "(\\1).so" BINDINGS_REGEX ${BINDINGS_STR})
- endif()
- endif()
-
- configure_files_in_dir(${TEMPLATE_DIR})
- configure_files_in_dir(${TEMPLATE_DIR})
-
- add_custom_target(remote-target-populate
- COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/*.sh
- COMMAND rsync -e "ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null" --archive --delete ${PROJECT_PKG_BUILD_DIR}/ ${RSYNC_TARGET}:${RSYNC_PREFIX}/${PROJECT_NAME}
- )
-
- add_custom_command(TARGET remote-target-populate
- POST_BUILD
- COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --green --bold ${REMOTE_LAUNCH}
- )
-
- add_dependencies(remote-target-populate populate)
- endif()
-endmacro(remote_targets_populate)
-
-macro(wgt_package_build)
- if(NOT EXISTS ${WIDGET_CONFIG_TEMPLATE})
- MESSAGE(FATAL_ERROR "${Red}WARNING ! Missing mandatory files to build widget file.\nYou need a config.xml template: please specify WIDGET_CONFIG_TEMPLATE correctly.${ColourReset}")
- endif()
- if(NOT WIDGET_TYPE)
- MESSAGE(FATAL_ERROR "WIDGET_TYPE must be set in your config.cmake.\neg.: set(WIDGET_TYPE application/vnd.agl.service)")
- endif()
- if(NOT DEFINED PROJECT_ICON)
- if( ${WIDGET_TYPE} MATCHES "agl.native")
- set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-native.png)
- elseif( ${WIDGET_TYPE} MATCHES "agl.service")
- set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-service.png)
- elseif( ${WIDGET_TYPE} MATCHES "x-executable")
- set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-qml.png)
- elseif( ${WIDGET_TYPE} MATCHES "text/html")
- set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-html5.png)
- endif()
- elseif(EXISTS "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
- set(ICON_PATH "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
- elseif(EXISTS "${WIDGET_ICON}")
- set(ICON_PATH "${WIDGET_ICON}")
- else()
- set(ICON_PATH ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/wgt/icon-default.png)
- endif()
-
- if(NOT WIDGET_ENTRY_POINT)
- set(WIDGET_ENTRY_POINT lib)
- endif()
-
- add_custom_command(OUTPUT ${PROJECT_PKG_BUILD_DIR}/config.xml
- COMMAND ${CMAKE_COMMAND} -DINFILE=${WIDGET_CONFIG_TEMPLATE} -DOUTFILE=${PROJECT_PKG_BUILD_DIR}/config.xml -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
- COMMAND cp ${ICON_PATH} ${PROJECT_PKG_BUILD_DIR}/${PROJECT_ICON}
-
- )
- add_custom_target(packaging_wgt DEPENDS ${PROJECT_PKG_BUILD_DIR}/config.xml)
-
- # Fulup ??? copy any extra file in wgt/etc into populate package before building the widget
- file(GLOB PROJECT_CONF_FILES "${TEMPLATE_DIR}/etc/*")
- if(${PROJECT_CONF_FILES})
- file(COPY "${TEMPLATE_DIR}/etc/*" DESTINATION ${PROJECT_PKG_BUILD_DIR}/etc/)
- endif(${PROJECT_CONF_FILES})
-
- add_custom_command(OUTPUT ${PROJECT_NAME}.wgt
- DEPENDS ${PROJECT_TARGETS}
- COMMAND wgtpkg-pack -f -o ${PROJECT_NAME}.wgt ${PROJECT_PKG_BUILD_DIR}
- )
-
- add_custom_target(widget DEPENDS ${PROJECT_NAME}.wgt)
- add_dependencies(widget populate packaging_wgt)
- set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.wgt")
-
- if(NOT RSYNC_TARGET)
- message ("${Yellow}.. Warning: RSYNC_TARGET not defined 'make widget-target-install' not instanciated${ColourReset}")
- add_custom_target(widget-target-install
- COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make widget-target-install'${ColourReset}"
- COMMAND exit -1
- )
- else()
- configure_files_in_dir(${TEMPLATE_DIR})
- add_custom_target(widget-target-install
- DEPENDS widget
- COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
- COMMAND ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
- )
-endif()
-
- if(PACKAGE_MESSAGE)
- add_custom_command(TARGET widget
- POST_BUILD
- COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
- endif()
-endmacro(wgt_package_build)
-
-macro(rpm_package_build)
- add_custom_command(OUTPUT ${NPKG_PROJECT_NAME}.spec
- DEPENDS ${PROJECT_TARGETS}
- archive
- packaging
- COMMAND rpmbuild --define=\"%_sourcedir ${PROJECT_PKG_ENTRY_POINT}\" -ba ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec
- )
-
- add_custom_target(rpm DEPENDS ${NPKG_PROJECT_NAME}.spec)
- add_dependencies(rpm populate packaging)
-
- if(PACKAGE_MESSAGE)
- add_custom_command(TARGET rpm
- POST_BUILD
- COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
- endif()
-endmacro(rpm_package_build)
-
-macro(deb_package_build)
-#TODO
-endmacro(deb_package_build)
-
-macro(project_package_build)
-# if(EXISTS ${TEMPLATE_DIR})
-# rpm_package_build()
-# endif()
-
- if(EXISTS ${TEMPLATE_DIR})
- wgt_package_build()
- endif()
-
-# if(EXISTS ${TEMPLATE_DIR})
-# deb_package_build()
-# endif()
-endmacro(project_package_build)
-
-macro(project_subdirs_add)
- set (ARGSLIST ${ARGN})
- list(LENGTH ARGSLIST ARGSNUM)
- if(${ARGSNUM} GREATER 0)
- file(GLOB filelist "${ARGV0}")
- else()
- file(GLOB filelist "*")
- endif()
-
- foreach(filename ${filelist})
- if(EXISTS "${filename}/CMakeLists.txt")
- add_subdirectory(${filename})
- endif(EXISTS "${filename}/CMakeLists.txt")
- endforeach()
-endmacro(project_subdirs_add)
-
-# Print developer helper message when build is done
-# -------------------------------------------------------
-macro(project_closing_msg)
- get_property(PROJECT_TARGETS_SET GLOBAL PROPERTY PROJECT_TARGETS SET)
- get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
- if(CLOSING_MESSAGE AND ${PROJECT_TARGETS_SET})
- add_custom_target(${PROJECT_NAME}_build_done ALL
- COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${CLOSING_MESSAGE}"
- )
- add_dependencies(${PROJECT_NAME}_build_done
- ${PROJECT_TARGETS} populate)
- endif()
-endmacro()
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-#--------------------------------------------------------------------------
-# WARNING:
-# Do not change this cmake template
-# Customise your preferences in "./conf.d/cmake/config.cmake"
-#--------------------------------------------------------------------------
-
-# ----------------------------------------------------------------------------
-# Archive target
-# ----------------------------------------------------------------------------
-#add_custom_command(OUTPUT ${ARCHIVE_OUTPUT}
-# DEPENDS ${PROJECT_TARGETS}
-# #Create git archive of the main project
-# COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git archive --format=tar --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/ HEAD -o ${ARCHIVE_OUTPUT_ARCHIVE}
-# #Create tmp git archive for each submodule
-# COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git submodule foreach --recursive ${CMD_ARCHIVE_SUBMODULE}
-# #Concatenate main archive and tmp submodule archive
-# COMMAND for SUBTAR in ${TMP_ARCHIVE_SUBMODULE}-*.tar\; do tar --concatenate --file=${ARCHIVE_OUTPUT_ARCHIVE} $$SUBTAR\;done
-# #Remove tmp submodule archive
-# COMMAND rm -rf ${TMP_ARCHIVE_SUBMODULE}-*.tar
-# #Compress main archive
-# COMMAND gzip --force --verbose ${ARCHIVE_OUTPUT_ARCHIVE}
-#)
-#add_custom_target(archive DEPENDS ${ARCHIVE_OUTPUT})
-
-# ----------------------------------------------------------------------------
-# Packaging target
-# ----------------------------------------------------------------------------
-#Format Build require package
-#foreach (PKG_CONFIG ${PKG_REQUIRED_LIST})
-# #Unset TMP variable
-# unset(XPREFIX)
-# unset(XRULE)
-# unset(RPM_EXTRA_DEP)
-# unset(DEB_EXTRA_DEP)
-# #For deb package,add EOL format only for a new line
-# if(DEB_PKG_DEPS)
-# set(DEB_PKG_DEPS "${DEB_PKG_DEPS},\n")
-# endif()
-# #Get pkg-config rule on version
-# string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG})
-# string(REGEX MATCH "[<>]?=" XRULE ${PKG_CONFIG})
-# #Only if pkg-config has rule on version
-# if(XRULE)
-# string(REGEX REPLACE ".*[<>]?=" "" XVERS ${PKG_CONFIG})
-# set(RPM_EXTRA_DEP " ${XRULE} ${XVERS}")
-# set(DEB_EXTRA_DEP " (${XRULE} ${XVERS})")
-# endif()
-# # Format for rpm package
-# set(RPM_PKG_DEPS "${RPM_PKG_DEPS}BuildRequires: pkgconfig(${XPREFIX})${RPM_EXTRA_DEP}\n")
-#
-# # Format for deb package
-# # Because the tool "dpkg" is used on the packages db to find the
-# # package providing the pkg-cong file ${XPREFIX}.pc, we need
-# # to test the OS release package type
-# # Only doable within a native environment not under SDK
-# if( OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-# execute_process(
-# COMMAND dpkg -S *${XPREFIX}.pc
-# OUTPUT_VARIABLE TMP_PKG_BIN
-# )
-# if(TMP_PKG_BIN)
-# string(REGEX REPLACE ":.*$" "" PKG_BIN ${TMP_PKG_BIN})
-# set(DEB_PKG_DEPS "${DEB_PKG_DEPS} ${PKG_BIN} ${DEB_EXTRA_DEP}")
-# else()
-# message(FATAL_ERROR "-- ${Red}${XPREFIX} development files not installed. Abort.${ColourReset}")
-# endif()
-# endif()
-#endforeach()
-#
-#if(NOT EXISTS ${TEMPLATE_DIR}/rpm-config.spec.in)
-# MESSAGE(FATAL_ERROR "${Red}Missing mandatory files: you need rpm-config.spec.in in ${TEMPLATE_DIR} folder.${ColourReset}")
-#endif()
-#
-## Because the tool "dpkg" is used on the packages db to find the
-## package providing the pkg-cong file ${XPREFIX}.pc, we need
-## to test the OS release package type
-## Only doable within a native environment not under SDK
-#if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-# add_custom_target(packaging_deb DEPENDS ${TEMPLATE_DIR}/debian.compat.in
-# ${TEMPLATE_DIR}/debian.changelog.in
-# ${TEMPLATE_DIR}/deb-config.dsc.in
-# ${TEMPLATE_DIR}/deb-config.install.in
-# ${TEMPLATE_DIR}/debian.control.in
-# ${TEMPLATE_DIR}/debian.rules.in
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.compat.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_COMPAT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.changelog.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_CHANGELOG} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.dsc.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_DSC} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.install.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_INSTALL} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.control.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_CONTROL} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.rules.in -DOUTFILE=${PACKAGING_DEB_OUTPUT_RULES} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-# )
-#endif()
-#
-#add_custom_target(packaging)
-#set(PACKAGING_SPEC_OUTPUT ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec)
-#add_custom_target(packaging_rpm DEPENDS ${TEMPLATE_DIR}/rpm-config.spec.in
-# COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/rpm-config.spec.in -DOUTFILE=${PACKAGING_SPEC_OUTPUT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-#)
-#add_dependencies(packaging packaging_rpm)
-#if(TARGET packaging_wgt)
-# add_dependencies(packaging packaging_wgt)
-#endif()
-#if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-# # Target to add dependencies indirectly to "packaging" target.
-# add_dependencies(packaging packaging_deb)
-#endif()
-
-#Generate a cmake cache file usable by cmake script.
-set(CacheForScript ${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake)
-#Create a tmp cmake file.
-file(WRITE ${CacheForScript} "")
-
-get_cmake_property(Vars VARIABLES)
-foreach(Var ${Vars})
- if(${Var})
- #Replace unwanted char.
- string(REPLACE "\\" "\\\\" VALUE ${${Var}})
- string(REPLACE "\n" "\\n" VALUE ${VALUE})
- string(REPLACE "\r" "\\n" VALUE ${VALUE})
- string(REPLACE "\"" "\\\"" VALUE ${VALUE})
- endif()
- file(APPEND ${CacheForScript} "set(${Var} \"${VALUE}\")\n")
-endforeach()
-
-# ----------------------------------------------------------------------------
-# Autobuild target
-# ----------------------------------------------------------------------------
-
-add_custom_target(autobuild ALL DEPENDS ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in
- ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/linux/autobuild.in
- COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
- COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-)
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-#--------------------------------------------------------------------------
-# WARNING:
-# Do not change this cmake template
-# Customise your preferences in "./conf.d/cmake/config.cmake"
-#--------------------------------------------------------------------------
-
-if(DEFINED ENV{SDKTARGETSYSROOT})
-file(STRINGS $ENV{SDKTARGETSYSROOT}/usr/include/linux/version.h LINUX_VERSION_CODE_LINE REGEX "LINUX_VERSION_CODE")
-set(BUILD_ENV_SYSROOT $ENV{SDKTARGETSYSROOT})
-elseif(DEFINED ENV{PKG_CONFIG_SYSROOT_DIR})
-file(STRINGS $ENV{PKG_CONFIG_SYSROOT_DIR}/usr/include/linux/version.h LINUX_VERSION_CODE_LINE REGEX "LINUX_VERSION_CODE")
-set(BUILD_ENV_SYSROOT $ENV{PKG_CONFIG_SYSROOT_DIR})
-else()
-file(STRINGS /usr/include/linux/version.h LINUX_VERSION_CODE_LINE REGEX "LINUX_VERSION_CODE")
-set(BUILD_ENV_SYSROOT "")
-endif()
-
-# Get the os type
-# Used to package .deb
-set(OS_RELEASE_PATH "${BUILD_ENV_SYSROOT}/etc/os-release")
-if(EXISTS ${OS_RELEASE_PATH})
- execute_process(COMMAND bash "-c" "grep -E '^ID(_LIKE)?=' ${OS_RELEASE_PATH} | tail -n 1"
- OUTPUT_VARIABLE TMP_OSRELEASE
- )
-
- if (NOT TMP_OSRELEASE STREQUAL "")
- string(REGEX REPLACE ".*=\"?([0-9a-z\._-]*)\"?\n" "\\1" OSRELEASE ${TMP_OSRELEASE})
- else()
- set(OSRELEASE "NOT COMPATIBLE !")
- endif()
-
-else()
- set(OSRELEASE "NOT COMPATIBLE ! Missing ${OS_RELEASE_PATH} file.")
-endif()
-message(STATUS "Distribution used ${OSRELEASE}")
-
-file(GLOB project_cmakefiles ${PROJECT_APP_TEMPLATES_DIR}/cmake/cmake.d/[0-9][0-9]-*.cmake)
-file(GLOB distro_cmakefiles ${PROJECT_APP_TEMPLATES_DIR}/../cmake/[0-9][0-9]-${OSRELEASE}*.cmake ${PROJECT_APP_TEMPLATES_DIR}/../cmake/[0-9][0-9]-common*.cmake)
-list(SORT distro_cmakefiles)
-if(NOT distro_cmakefiles)
- file(GLOB distro_cmakefiles ${PROJECT_APP_TEMPLATES_DIR}/../cmake/[0-9][0-9]-default*.cmake)
-endif()
-
-list(APPEND project_cmakefiles "${distro_cmakefiles}")
-list(SORT project_cmakefiles)
-
-file(GLOB home_cmakefiles $ENV{HOME}/.config/app-templates/cmake.d/[0-9][0-9]-common*.cmake $ENV{HOME}/.config/app-templates/cmake.d/[0-9][0-9]-${PROJECT_NAME}*.cmake)
-list(SORT home_cmakefiles)
-file(GLOB system_cmakefiles /etc/app-templates/cmake.d/[0-9][0-9]-common*.cmake /etc/app-templates/cmake.d/[0-9][0-9]-${PROJECT_NAME}*.cmake)
-list(SORT system_cmakefiles)
-
-foreach(file ${system_cmakefiles} ${home_cmakefiles} ${project_cmakefiles})
- message(STATUS "Include: ${file}")
- include(${file})
-endforeach()
-
-if(DEFINED PROJECT_SRC_DIR_PATTERN)
- project_subdirs_add(${PROJECT_SRC_DIR_PATTERN})
-else()
- project_subdirs_add()
-endif(DEFINED PROJECT_SRC_DIR_PATTERN)
-
-configure_files_in_dir(${PROJECT_APP_TEMPLATES_DIR}/${ENTRY_POINT}/template.d)
-configure_files_in_dir($ENV{HOME}/.config/app-templates/scripts)
-configure_files_in_dir(/etc/app-templates/scripts)
-
-project_targets_populate()
-remote_targets_populate()
-project_package_build()
-project_closing_msg()
+++ /dev/null
-include(${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake)
-configure_file(${INFILE} ${OUTFILE} @ONLY)
+++ /dev/null
-{ global: afbBindingV*; local: *; };
+++ /dev/null
-Document revisions
-==================
-
-| Date | Version | Designation | Author |
-|-------------|---------|--------------------------------------|-------------------------|
-| 4 Jul 2017 | 1.0 | Initial release | R. Forlot [ Iot.bzh ] |
+++ /dev/null
-# Introduction
-
-This document explain how to use the CMake templates files and associated
-files to ease developement of AGL application.
-
-<br>
-<br>
-<br>
-<br>
-<br>
-
-| *Meta* | *Data* |
-| -- | -- |
-| **Title** | {{ config.title }} |
-| **Author** | {{ config.author }} |
-| **Description** | {{ config.description }} |
-| **Keywords** | {{ config.keywords }} |
-| **Language** | English |
-| **Published** | Published {{ config.published }} as an electronic book |
-| **Updated** | {{ gitbook.time }} |
-| **Collection** | Open-source |
-| **Website** | [{{ config.website }}]({{ config.website }}) |
+++ /dev/null
-# Summary
-
-* [Document revisions](0-Doc-Revisions.md)
-
-* [Developper guide](dev_guide/0_Abstract.md)
- * [Quickstart](dev_guide/1_Quickstart.md)
- * [Project architecture](dev_guide/2_project_architecture.md)
- * [Advanced usage](dev_guide/3_advanced_usage.md)
- * [Customization](dev_guide/4_advanced_customization.md)
- * [Autobuild](dev_guide/5_autobuild.md)
+++ /dev/null
-{% extends "layout.html" %}
-
-{% block title %}{{ page.title }}{% endblock %}
-{% block description %}{{ page.description }}{% endblock %}
-
-{% block style %}
- {### Include theme css before plugins css ###}
- {% if not fileExists(config.styles.print) %}
- {% if options.format %}
- <link rel="stylesheet" href="{{ (options.format + ".css")|resolveAsset }}">
- {% else %}
- <link rel="stylesheet" href="{{ "ebook.css"|resolveAsset }}">
- {% endif %}
- {% endif %}
-
- {{ super() }}
-
- {### Custom stylesheets for the book ###}
-
- {% for type, style in config.styles %}
- {% if fileExists(style) and (type == "ebook" or type == "print" or type == options.format) %}
- <link rel="stylesheet" href="{{ style|resolveFile }}">
- {% endif %}
- {% endfor %}
-{% endblock %}
-
-{% block body %}
-<div class="page">
- {% block page %}
- <h1 class="book-chapter book-chapter-{{ page.depth }}">{{ page.title }}</h1>
- <div class="section">
- {{ page.content|safe }}
- </div>
- {% endblock %}
-</div>
-{% endblock %}
+++ /dev/null
-{% extends "./page.html" %}
-{% block body %}
-<div id="pdf-footer" class="pdf-footer">
- <span class="footer-left">Version {{ config.version }}</span>
- <span class="footer-right">{{ page.num }}</span>
- <span class="footer-center">{{ config.published }}</span>
-</div>
-
-<!-- Allow to hide footer for some pages using hidepagefooters config in book.json -->
-<script>
- if (({% for num in config.hidepagefooters %}{{ page.num }} == {{ num }} || {% endfor %}false)) document.getElementById('pdf-footer').style.display = 'none'
-</script>
-{% endblock %}
+++ /dev/null
-{% extends "./page.html" %}
-{% block body %}
-<div id="pdf-header" class="pdf-header">
- <span class="header-left">IoT.Bzh</span>
- <span class="header-right">{{ config.title }}</span>
-</div>
-
-<!-- Allow to hide header for some pages using hidepageheaders config in book.json -->
-<script>
- if (({% for num in config.hidepageheaders %}{{ page.num }} == {{ num }} || {% endfor %}false)) document.getElementById('pdf-header').style.display = 'none'
-</script>
-
-{% endblock %}
\ No newline at end of file
+++ /dev/null
-{% extends "./page.html" %}
-
-{% block title %}{{ "SUMMARY"|t }}{% endblock %}
-
-{% macro articles(_articles) %}
- {% for article in _articles %}
- <li>
- <span class="inner">
- {% if article.path or article.url %}
- {% if article.path %}
- <a href="{{ article.path|contentURL }}{{ article.anchor }}">{{ article.title }}</a>
- {% else %}
- <a target="_blank" href="{{ article.url }}">{{ article.title }}</a>
- {% endif %}
- {% else %}
- <span>{{ article.title }}</span>
- {% endif %}
- {% if 1 %}
- <span class="page">{{ article.level }}</span>
- {% endif %}
- </span>
- {% if article.articles.length > 0 %}
- <ol>
- {{ articles(article.articles) }}
- </ol>
- {% endif %}
- </li>
- {% endfor %}
-{% endmacro %}
-
-{% block page %}
-<div class="section toc">
- <h1>{{ "SUMMARY"|t }}</h1>
- <ol>
- {% for part in summary.parts %}
- {% if part.title %}
- <li class="part-title">
- <h2>{{ part.title }}</h2>
- </li>
- {% endif %}
- {{ articles(part.articles) }}
-
- {% if not loop.last %}
- <li class="divider"></li>
- {% endif %}
- {% endfor %}
-
- {% if glossary.path %}
- <li>
- <span class="inner">
- <a href="{{ ('/' + glossary.path)|contentURL }}">{{ "GLOSSARY"|t }}</a>
- </span>
- </li>
- {% endif %}
- </ol>
-</div>
-{% endblock %}
-
+++ /dev/null
-<!DOCTYPE HTML>
-<html lang="{{ config.language }}" {% if page.dir == "rtl" %}dir="rtl"{% endif %}>
- <head>
- <meta charset="UTF-8">
- <meta content="text/html; charset=utf-8" http-equiv="Content-Type">
- <title>{% block title %}{{ config.title|d("GitBook", true) }}{% endblock %}</title>
- <meta http-equiv="X-UA-Compatible" content="IE=edge" />
- <meta name="description" content="{% block description %}{% endblock %}">
- <meta name="generator" content="GitBook {{ gitbook.version }}">
- {% if config.author %}<meta name="author" content="{{ config.author }}">{% endif %}
- {% if config.isbn %}<meta name="identifier" content="{{ config.isbn }}" scheme="ISBN">{% endif %}
- {% block style %}
- {% for resource in plugins.resources.css %}
- {% if resource.url %}
- <link rel="stylesheet" href="{{ resource.url }}">
- {% else %}
- <link rel="stylesheet" href="{{ resource.path|resolveAsset }}">
- {% endif %}
- {% endfor %}
- {% endblock %}
-
- {% block head %}{% endblock %}
- </head>
- <body>
- {% block body %}{% endblock %}
- {% block javascript %}{% endblock %}
- </body>
-</html>
+++ /dev/null
-# Developper Guide: use AGL CMake Templates
-
-## Abstract
-
-Files used to build an application, or binding, project with the
-AGL Application Framework.
-
-To build your AGL project using these templates, you have to install
-them within your project and adjust compilation option in `config.cmake`.
-For technical reasons, you also have to specify **cmake** target in
-sub CMakeLists.txt installed. Make a globbing search to find source files
-isn't recommended now to handle project build especially in a multiuser
-project because CMake will not be aware of new or removed source files.
-
-You'll find usage samples here:
-
-- [helloworld-service](https://github.com/iotbzh/helloworld-service)
-- [low-level-can-service](https://gerrit.automotivelinux.org/gerrit/apps/low-level-can-service)
-- [high-level-viwi-service](https://github.com/iotbzh/high-level-viwi-service)
-- [audio-binding](https://github.com/iotbzh/audio-binding)
-- [unicens2-binding](https://github.com/iotbzh/unicens2-binding)
+++ /dev/null
-# Quickstart
-
-## Initialization
-
-To use these templates files on your project just install the reference files using
-**git submodule** then use `config.cmake` file to configure your project specificities :
-
-```bash
-git submodule add https://gerrit.automotivelinux.org/gerrit/apps/app-templatesconf.d/app-templates conf.d/app-templates
-mkdir conf.d/cmake
-cp conf.d/app-templates/cmake/config.cmake.sample conf.d/cmake/config.cmake
-```
-
-Edit the copied config.cmake file to fit your needs.
-
-Now, create your top CMakeLists.txt file which include `config.cmake` file.
-
-An example is available in **app-templates** submodule that you can copy and
-use:
-
-```bash
-cp conf.d/app-templates/cmake/CMakeLists.txt CMakeLists.txt
-```
-
-## Create your CMake targets
-
-For each target part of your project, you need to use ***PROJECT_TARGET_ADD***
-to include this target to your project.
-
-Using it, make available the cmake variable ***TARGET_NAME*** until the next
-***PROJECT_TARGET_ADD*** is invoked with a new target name.
-
-So, typical usage defining a target is:
-
-```cmake
-PROJECT_TARGET_ADD(SuperExampleName) --> Adding target to your project
-
-add_executable/add_library(${TARGET_NAME}.... --> defining your target sources
-
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES.... --> fit target properties
-for macros usage
-
-INSTALL(TARGETS ${TARGET_NAME}....
-```
-
-## Targets PROPERTIES
-
-You should set properties on your targets that will be used to package your
-apps in a widget file that could be installed on an AGL system.
-
-Specify what is the type of your targets that you want to be included in the
-widget package with the property **LABELS**:
-
-Choose between:
-
-- **BINDING**: Shared library that be loaded by the AGL Application Framework
-- **BINDINGV2**: Shared library that be loaded by the AGL Application Framework.
- This has to be accompagnied with a JSON file named like the *${OUTPUT_NAME}-apidef* of
- the target that describe the API with OpenAPI syntax (e.g: *mybinding-apidef*).
- Or you can choose the name by setting the *CACHE* cmake variable *OPENAPI_DEF*
- (***CAUTION***: setting a CACHE variable is needed, or set a normal variable
- with the *PARENT_SCOPE* option to make it visible for the parent scope
- where the target is defined) JSON file will be used to generate header file
- using `afb-genskel` tool.
-- **HTDOCS**: Root directory of a web app. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **DATA**: Resources used by your application. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **EXECUTABLE**: Entry point of your application executed by the AGL
- Application Framework
-
-> **TIP** you should use the prefix _afb-_ with your **BINDING* targets which
-> stand for **Application Framework Binding**.
-
-```cmake
-SET_TARGET_PROPERTIES(${TARGET_NAME}
- PREFIX "afb-"
- LABELS "BINDING"
- OUTPUT_NAME "file_output_name")
-```
-
-> **NOTE**: You doesn't need to specify an **INSTALL** command for these
-> targets. This is already handle by template and will be installed in the
-> following path : **${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}**
+++ /dev/null
-# Project architecture
-
-A typical project architecture would be :
-
-```tree
-<project-root-path>
-│
-├── conf.d/
-│ ├── autobuild/
-│ │ ├── agl
-│ │ │ └── autobuild
-│ │ ├── linux
-│ │ │ └── autobuild
-│ │ └── windows
-│ │ └── autobuild
-│ ├── app-templates/
-│ │ ├── README.md
-│ │ ├── autobuild/
-│ │ │ ├── agl
-│ │ │ │ └── autobuild.in
-│ │ │ ├── linux
-│ │ │ │ └── autobuild.in
-│ │ │ └── windows
-│ │ │ └── autobuild.in
-│ │ ├── cmake/
-│ │ │ ├── config.cmake.sample
-│ │ │ ├── export.map
-│ │ │ └── macros.cmake
-│ │ ├── deb/
-│ │ │ └── config.deb.in
-│ │ ├── rpm/
-│ │ │ └── config.spec.in
-│ │ └── wgt/
-│ │ ├── config.xml.in
-│ │ ├── config.xml.in.sample
-│ │ ├── icon-default.png
-│ │ ├── icon-html5.png
-│ │ ├── icon-native.png
-│ │ ├── icon-qml.png
-│ │ └── icon-service.png
-│ ├── packaging/
-│ │ ├── config.spec
-│ │ └── config.deb
-│ ├── cmake
-│ │ └── config.cmake
-│ └── wgt
-│ └── config.xml.in
-├── <libs>
-├── <target>
-│ └── <files>
-├── <target>
-│ └── <file>
-└── <target>
- └── <files>
-```
-
-| # | Parent | Description |
-| - | -------| ----------- |
-| \<root-path\> | - | Path to your project. Hold master CMakeLists.txt and general files of your projects. |
-| conf.d | \<root-path\> | Holds needed files to build, install, debug, package an AGL app project |
-| app-templates | conf.d | Git submodule to app-templates AGL repository which provides CMake helpers macros library, and build scripts. config.cmake is a copy of config.cmake.sample configured for the projects. SHOULD NOT BE MODIFIED MANUALLY !|
-| autobuild | conf.d | Scripts generated from app-templates to build packages the same way for differents platforms.|
-| cmake | conf.d | Contains at least config.cmake file modified from the sample provided in app-templates submodule. |
-| wgt | conf.d | Contains at least config.xml.in template file modified from the sample provided in app-templates submodule for the needs of project (See config.xml.in.sample file for more details). |
-| packaging | conf.d | Contains output files used to build packages. |
-| \<libs\> | \<root-path\> | External dependencies libraries. This isn't to be used to include header file but build and link statically specifics libraries. | Library sources files. Can be a decompressed library archive file or project fork. |
-| \<target\> | \<root-path\> | A target to build, typically library, executable, etc. |
-
-## Manage app-templates submodule
-
-### Update
-
-You may have some news bug fixes or features available from app-templates
-repository that you want. To update your submodule proceed like the following:
-
-```bash
-git submodule update --remote
-git commit -s conf.d/app-templates
-```
-
-This will update the submodule to the HEAD of master branch repository. Save
-the modification by commiting it in your master git project.
-
-### Checkout submodule to a git tag
-
-You could just want to update at a specified repository tag or branch or commit
-, here are the method to do so:
-
-```bash
-cd conf.d/app-templates
-# Choose one of the following depending what you want
-git checkout <tag_name>
-git checkout --detach <branch_name>
-git checkout --detach <commit_id>
-# Then commit
-cd ../..
-git commit -s conf.d/app-templates
-```
+++ /dev/null
-# Build a widget
-
-## config.xml.in file
-
-To build a widget you need a _config.xml_ file describing what is your apps and
-how Application Framework would launch it. This repo provide a simple default
-file _config.xml.in_ that should work for simple application without
-interactions with others bindings.
-
-It is recommanded that you use the sample one which is more complete. You can
-find it at the same location under the name _config.xml.in.sample_ (stunning
-isn't it). Just copy the sample file to your _conf.d/wgt_ directory and name it
-_config.xml.in_, then edit it to fit your needs.
-
-> ***CAUTION*** : The default file is only meant to be use for a
-> simple widget app, more complicated ones which needed to export
-> their api, or ship several app in one widget need to use the provided
-> _config.xml.in.sample_ which had all new Application Framework
-> features explained and examples.
-
-## Using cmake template macros
-
-To leverage all cmake templates features, you have to specify ***properties***
-on your targets. Some macros will not works without specifying which is the
-target type.
-
-As the type is not always specified for some custom targets, like an ***HTML5***
-application, macros make the difference using ***LABELS*** property.
-
-Choose between:
-
-- **BINDING**: Shared library that be loaded by the AGL Application Framework
-- **BINDINGV2**: Shared library that be loaded by the AGL Application Framework.
- This has to be accompagnied with a JSON file named like the *${OUTPUT_NAME}-apidef* of
- the target that describe the API with OpenAPI syntax (e.g: *mybinding-apidef*).
- Or you can choose the name by setting the *CACHE* cmake variable *OPENAPI_DEF*
- (***CAUTION***: setting a CACHE variable is needed, or set a normal variable
- with the *PARENT_SCOPE* option to make it visible for the parent scope
- where the target is defined) JSON file will be used to generate header file
- using `afb-genskel` tool.
-- **HTDOCS**: Root directory of a web app. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **DATA**: Resources used by your application. This target has to build its
- directory and puts its files in the ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
-- **EXECUTABLE**: Entry point of your application executed by the AGL
- Application Framework
-
-> **TIP** you should use the prefix _afb-_ with your **BINDING* targets which
-> stand for **Application Framework Binding**.
-
-Example:
-
-```cmake
-SET_TARGET_PROPERTIES(${TARGET_NAME} PROPERTIES
- LABELS "HTDOCS"
- OUTPUT_NAME dist.prod
- )
-```
-
-> **NOTE**: You doesn't need to specify an **INSTALL** command for these
-> targets. This is already handle by template and will be installed in the
-> following path : **${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}**
-
-## Macro reference
-
-### PROJECT_TARGET_ADD
-
-Typical usage would be to add the target to your project using macro
-`PROJECT_TARGET_ADD` with the name of your target as parameter.
-
-Example:
-
-```cmake
-PROJECT_TARGET_ADD(low-can-demo)
-```
-
-> ***NOTE***: This will make available the variable `${TARGET_NAME}`
-> set with the specificied name. This variable will change at the next call
-> to this macros.
-
-### project_subdirs_add
-
-This macro will search in all subfolder any `CMakeLists.txt` file. If found then
-it will be added to your project. This could be use in an hybrid application by
-example where the binding lay in a sub directory.
-
-Usage :
-
-```cmake
-project_subdirs_add()
-```
-
-You also can specify a globbing pattern as argument to filter which folders
-will be looked for.
-
-To filter all directories that begin with a number followed by a dash the
-anything:
-
-```cmake
-project_subdirs_add("[0-9]-*")
-```
+++ /dev/null
-# Advanced customization
-
-## Including additionnals cmake files
-
-### Machine and system custom cmake files
-
-Advanced tuning is possible using addionnals cmake files that are included
-automatically from some specifics locations. They are included in that order:
-
-- Project CMake files normaly located in _<project-root-path>/conf.d/app-templates/cmake/cmake.d_
-- Home CMake files located in _$HOME/.config/app-templates/cmake.d_
-- System CMake files located in _/etc/app-templates/cmake.d_
-
-CMake files has to be named using the following convention: `XX-common*.cmake`
-or `XX-${PROJECT_NAME}*.cmake`, where `XX` are numbers, `*` file name
-(ie. `99-common-my_customs.cmake`).
-
-> **NOTE** You need to specify after numbers that indicate include order, to
-which project that file applies, if it applies to all project then use keyword
-`common`.
-
-So, saying that you should be aware that every normal cmake variables used at
-project level could be overwrited by home or system located cmake files if
-variables got the same name. Exceptions are cached variables set using
-**CACHE** keyword:
-
-Example:
-
-```cmake
-set(VARIABLE_NAME 'value string random' CACHE STRING 'docstring')
-```
-
-### OS custom cmake files
-
-This is meant to personalize the project depending on the OS your are using.
-At the end of config.cmake, common.cmake will include lot of cmake file to
-customize project build depending on your plateform. It will detect your OS
-deducing it from file _/etc/os-release_ now as default in almost all Linux
-distribution.
-
-So you can use the value of field **ID_LIKE** or **ID** if the
-first one doesn't exists and add a cmake file for that distribution in your
-_conf.d/cmake/_ directory or relatively to your _app-templates_ submodule path
-_app-templates/../cmake/_
-
-Those files has to be named use the following scheme _XX-${OSRELEASE}*.cmake_
-where _XX_ are numbers, ${OSRELEASE} the **ID_LIKE** or **ID** field from
-_/etc/os-release_ file.
-
-## Include customs templated scripts
-
-As well as for additionnals cmake files you can include your own templated
-scripts that will be passed to cmake command `configure_file`.
-
-Just create your own script to the following directories:
-
-- Home location in _$HOME/.config/app-templates/scripts_
-- System location in _/etc/app-templates/scripts_
-
-Scripts only needs to use the extension `.in` to be parsed and configured by
-CMake command.
+++ /dev/null
-# Autobuild script usage
-
-## Generation
-
-To be integrated in the Yocto build workflow you have to generate `autobuild`
-scripts using _autobuild_ target.
-
-To generate those scripts proceeds:
-
-```bash
-mkdir -p build
-cd build
-cmake .. && make autobuild
-```
-
-You should see _conf.d/autobuild/agl/autobuild_ file now.
-
-## Available targets
-
-Here are the available targets available from _autobuild_ scripts:
-
-- **clean** : clean build directory from object file and targets results.
-- **distclean** : delete build directory
-- **configure** : generate project Makefile from CMakeLists.txt files.
-- **build** : compile all project targets.
-- **package** : build and output a wgt package.
-
-You can specify variables that modify the behavior of compilation using
-the following variables:
-
-- **CONFIGURE_ARGS** : Variable used at **configure** time.
-- **BUILD_ARGS** : Variable used at **build** time.
-- **DEST** : Directory where to output ***wgt*** file.
-
-Variable as to be in CMake format. (ie: BUILD_ARGS="-DC_FLAGS='-g -O2'")
-
-Usage example:
-
-```bash
-./conf.d/autobuild/wgt/autobuild package DEST=/tmp
-```
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="1800"
- height="2360"
- viewBox="0 0 1800 2360"
- id="svg2"
- version="1.1"
- inkscape:version="0.91 r13725"
- sodipodi:docname="cover.svg">
- <defs
- id="defs4175">
- <filter
- style="color-interpolation-filters:sRGB"
- inkscape:label="Drop Shadow"
- id="filter4000">
- <feFlood
- result="flood"
- flood-color="rgb(0,0,0)"
- flood-opacity="0.475"
- id="feFlood4002" />
- <feComposite
- result="composite1"
- operator="in"
- in="flood"
- in2="SourceGraphic"
- id="feComposite4004" />
- <feGaussianBlur
- result="blur"
- stdDeviation="5"
- id="feGaussianBlur4006" />
- <feOffset
- result="offset"
- dy="8"
- dx="8"
- id="feOffset4008" />
- <feComposite
- result="composite2"
- operator="over"
- in="SourceGraphic"
- in2="offset"
- id="feComposite4010" />
- </filter>
- <filter
- style="color-interpolation-filters:sRGB"
- id="filter4000-6"
- inkscape:label="Drop Shadow">
- <feFlood
- id="feFlood4002-4"
- flood-opacity="0.475"
- flood-color="rgb(0,0,0)"
- result="flood" />
- <feComposite
- id="feComposite4004-6"
- in2="SourceGraphic"
- in="flood"
- operator="in"
- result="composite1" />
- <feGaussianBlur
- id="feGaussianBlur4006-2"
- stdDeviation="5"
- result="blur" />
- <feOffset
- id="feOffset4008-8"
- dx="8"
- dy="8"
- result="offset" />
- <feComposite
- id="feComposite4010-9"
- in2="offset"
- in="SourceGraphic"
- operator="over"
- result="composite2" />
- </filter>
- </defs>
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="0.24748737"
- inkscape:cx="928.3577"
- inkscape:cy="404.58117"
- inkscape:document-units="px"
- inkscape:current-layer="layer1"
- showgrid="false"
- inkscape:snap-text-baseline="false"
- units="px"
- inkscape:window-width="1920"
- inkscape:window-height="1171"
- inkscape:window-x="1920"
- inkscape:window-y="0"
- inkscape:window-maximized="1"
- showguides="false" />
- <metadata
- id="metadata7">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title />
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:label="Layer 1"
- inkscape:groupmode="layer"
- id="layer1"
- transform="translate(0,1307.6379)">
- <g
- id="iotbzh-logo"
- transform="matrix(2.3917866,0,0,2.3917866,216.6324,-1946.4393)"
- inkscape:export-filename="/home/sdx/Pictures/Logo/logo_iot_bzh_100dpi.png"
- inkscape:export-xdpi="100.22011"
- inkscape:export-ydpi="100.22011"
- style="display:inline;filter:url(#filter4000-6)">
- <text
- sodipodi:linespacing="125%"
- id="text3557-5-3-7-0-7-3"
- y="519.50671"
- x="27.886671"
- style="font-style:normal;font-weight:normal;font-size:97.09867096px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none"
- xml:space="preserve"><tspan
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:97.09867096px;line-height:125%;font-family:FreeEuro;-inkscape-font-specification:'FreeEuro Bold';text-align:start;writing-mode:lr-tb;text-anchor:start"
- y="519.50671"
- x="27.886671"
- id="tspan3559-5-4-1-5-0-6"
- sodipodi:role="line">IOT</tspan></text>
- <path
- inkscape:connector-curvature="0"
- d="m 286.73007,473.23356 c 28.21686,16.29102 28.75566,58.73779 0.99693,78.53831 -7.67688,5.47598 -8.77935,4.91028 -1.99529,-1.0238 17.47377,-15.28453 17.98492,-42.17775 1.08522,-57.09786 l -3.91266,-3.45435 0.72312,-3.71053 c 0.39771,-2.04076 0.5997,-5.73115 0.44885,-8.20083 -0.33876,-5.54623 0.15803,-6.49185 2.65383,-5.05094 z m -64.76568,11.40332 c 7.06047,-7.74198 18.64659,-14.16089 29.04027,-16.08874 l 6.87489,-1.27521 0.87404,2.89709 c 0.4807,1.59343 0.67439,5.2245 0.43037,8.06906 l -0.44364,5.17195 -6.13887,1.6918 c -10.91241,3.00731 -20.4022,10.85909 -25.4533,21.05979 l -2.41633,4.87984 -2.74281,-0.41238 c -5.14252,-0.77316 -12.72985,-3.97645 -12.79123,-5.40033 -0.092,-2.13451 8.34659,-15.74625 12.76661,-20.59287 z m 33.20546,36.39493 c -28.21687,16.29101 -65.24624,-4.46574 -68.51461,-38.40577 -0.9039,-9.38637 0.13723,-10.0583 1.88428,-1.21608 4.49989,22.77499 27.53453,36.66428 48.90556,29.48876 l 4.94788,-1.66128 2.85184,2.48149 c 1.56852,1.36481 4.66349,3.38493 6.87772,4.48914 4.97257,2.47973 5.54308,3.38282 3.04733,4.82374 z m 22.50729,-61.79039 c 3.17451,9.98553 2.94038,23.22889 -0.58688,33.19399 l -2.33309,6.59143 -2.94597,-0.69161 c -1.6203,-0.38041 -4.86173,-2.02821 -7.2032,-3.6618 l -4.25721,-2.97018 1.60429,-6.16234 c 2.85178,-10.95404 0.79685,-23.09833 -5.51167,-32.57307 l -3.01788,-4.53253 1.72854,-2.16916 c 3.24083,-4.06698 9.80863,-9.03614 11.07242,-8.37738 1.89457,0.98756 9.46336,15.1015 11.45065,21.35265 z m -48.80223,10.31437 c 0,-32.58201 36.49058,-54.27201 67.51771,-40.1325 8.58077,3.9104 8.6421,5.148 0.11108,2.23988 -21.97368,-7.49048 -45.51946,5.51348 -49.99082,27.6091 l -1.03521,5.11561 -3.57498,1.22902 c -1.96621,0.67596 -5.26316,2.34622 -7.32655,3.71171 -4.63379,3.06649 -5.70115,3.10904 -5.70115,0.22718 z m 42.25842,50.3871 c -10.23499,-2.24356 -21.58699,-9.06801 -28.45341,-17.10525 l -4.5418,-5.31622 2.07194,-2.20549 c 1.13957,-1.21302 4.18733,-3.19628 6.77282,-4.40726 l 4.70085,-2.20176 4.53458,4.47053 c 8.06061,7.94674 19.60535,12.23927 30.96496,11.51329 l 5.43422,-0.34731 1.01427,2.58154 c 1.90169,4.84014 2.92124,13.01261 1.71883,13.77769 -1.80254,1.14695 -17.80995,0.64475 -24.21726,-0.75976 z"
- style="display:inline;fill:#5a2ca0"
- id="path3415-4-2-2-5-0-3-7-4-4-1-5" />
- <text
- sodipodi:linespacing="125%"
- id="text3557-5-3-7-46-7-3-7"
- y="519.50671"
- x="317.95816"
- style="font-style:normal;font-weight:normal;font-size:97.09867096px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none"
- xml:space="preserve"><tspan
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:97.09867096px;line-height:125%;font-family:FreeEuro;-inkscape-font-specification:'FreeEuro Bold';text-align:start;writing-mode:lr-tb;text-anchor:start"
- y="519.50671"
- x="317.95816"
- id="tspan3559-5-4-1-90-0-2-9"
- sodipodi:role="line">BZH</tspan></text>
- </g>
- <flowRoot
- xml:space="preserve"
- id="root-title"
- transform="matrix(2.3469382,0,0,2.3469382,464.13874,-1200)"><flowRegion
- id="flowRegion4303"><rect
- id="rect4305"
- width="679.99994"
- height="141.42853"
- x="-154.28572"
- y="400"/>
- </flowRegion>
- <flowPara
- id="title"
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:87.5px;line-height:125%;font-family:Verdana;-inkscape-font-specification:'Verdana, Bold';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1">{title}</flowPara></flowRoot> <flowRoot
- xml:space="preserve"
- id="root-subtitle"
- transform="matrix(1.8523279,0,0,1.8523279,553.97647,-380)"><flowRegion
- id="flowRegion4303-6"><rect
- id="rect4305-0"
- width="852.32806"
- height="154.51677"
- x="-239.3591"
- y="290"/>
- </flowRegion>
- <flowPara
- id="subtitle"
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:62.5px;line-height:125%;font-family:Verdana;-inkscape-font-specification:'Verdana, Bold';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1">{subtitle}</flowPara>
- </flowRoot>
- <flowRoot
- id="root-version"
- xml:space="preserve"
- transform="translate(-2.0185547,164)"><flowRegion
- id="flowRegion4169"><rect
- y="501.68909"
- x="343.32947"
- height="99.591171"
- width="1117.3768"
- id="rect4171" /></flowRegion><flowPara
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:50px;line-height:125%;font-family:Verdana;-inkscape-font-specification:'Verdana, Bold';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1"
- id="version">{version}</flowPara></flowRoot> <flowRoot
- transform="translate(-2.0185547,238)"
- xml:space="preserve"
- id="root-date"><flowRegion
- id="flowRegion4170"><rect
- id="rect4172"
- width="1117.3768"
- height="99.591171"
- x="343.32947"
- y="501.68909" /></flowRegion><flowPara
- id="date"
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:50px;line-height:125%;font-family:Verdana;-inkscape-font-specification:'Verdana, Bold';text-align:center;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1">{date}</flowPara></flowRoot> </g>
-</svg>
+++ /dev/null
-/* IoT.Bzh theaming */
-
-h1 {
- color: #330066;
- border-bottom: 2px solid #330066;
-}
-
-h2 {
- color: #330066;
-}
-
-h3 {
- color: #330066;
-}
-
-h4 {
- color: #330066;
-}
-
-
-/* GENERAL ELEMENTS */
-
-/* clear both */
-
-.clear {
- clear: both;
-}
-
-.section> :last-child {
- margin-bottom: 0 !important;
-}
-
-.section> :first-child {
- margin-top: 0 !important;
-}
-
-
-/* SPECIAL ELEMENTS */
-
-
-/* page break always after element on pdf/print definition */
-
-div.pagebreak {
- page-break-after: always;
-}
-
-
-/* no page break inside element on pdf/print definition */
-
-div.nopb {
- page-break-inside: avoid !important;
- margin: 4px 0 4px 0;
-}
-
-
-/* note blocks */
-
-div.note {
- background: #FCF8E3 none repeat scroll 0% 0%;
- color: #8A6D3B;
- padding: 15px;
- margin-bottom: 10px;
- border-bottom: 5px solid #DDD;
- border-color: #FAEBCC;
- page-break-inside: avoid;
-}
-
-div.note p {
- padding-bottom: 0;
- margin-bottom: 0;
-}
-
-
-/* images, figures and captions */
-
-p img {
- /* center all images */
- display: block;
- margin: 0 auto;
- padding: 10px 0;
-}
-
-figure {
- margin: 1.0em 0px;
- padding: 10px 0;
- text-align: center;
- page-break-inside: avoid;
- display: block;
-}
-
-figure img {
- display: block;
- margin: 0 auto;
-}
-
-figcaption {
- clear: left;
- margin: 1.0em 0 0 0;
- text-align: center;
- font-style: italic;
- line-height: 1.5em;
- font-size: 80%;
- color: #666;
- display: block;
-}
-
-.page .section p img {
- margin-top: 10px;
-}
-
-
-/* ul, ol list margin fix */
-
-.page .section ol,
-.page .section ul {
- margin-bottom: 10px;
-}
-
-
-/* blockquotes */
-
-.page .section blockquote {
- margin: 0 0 0 5%;
- font-style: italic;
-}
-
-
-/* PAGE SPECIFIC */
-
-
-/* set summary page to right side of the paper */
-
-.page .toc h1 {
- page-break-before: right;
-}
-
-.page .section.toc {
- page-break-inside: always;
-}
-
-/* table headers */
-
-div#README\.md table {
- margin-top: 30px;
- font-size: 95%;
-}
-
-div#README\.md table thead {
- display: none;
-}
-
-
-
-/* CITATION AND IMAGES */
-
-
-/* math image styles */
-
-.page .section p img.svg,
-.page .section p img.png {
- margin-top: 0px;
- margin-bottom: -2px;
-}
-
-.page .section p img.math {
- vertical-align: middle;
- height: auto;
- width: auto;
- margin-top: -4px;
- max-height: 15px;
-}
-
-.page .section p img.math.line1 {
- margin-top: -7px;
- max-height: 19px;
-}
-
-.page .section p img.math.line2 {
- margin-top: -1px;
- max-height: 30px;
-}
-
-
-/* credits page */
-
-.page .section ul.pictures {
- margin-left: -30px;
-}
-
-.page .section ul.pictures li {
- list-style: outside none none;
-}
-
-.page .section ul.pictures li a {
- float: left;
-}
-
-.page .section ul.pictures li span {
- display: block;
- margin-left: 100px;
-}
-
-
-
-/* sub and super script */
-
-.page .section sub {
- font-size: 80%;
- margin-left: 1px;
-}
-
-
-/* citations and references */
-
-.page .section sup {
- margin-left: -1px;
- margin-right: 2px;
- font-size: 80%;
-}
-
-.page .section sup:before {
- content: " ";
-}
-
-.page .section ul.citations,
-.page .section ul.references {
- margin-left: -30px;
-}
-
-
-.page .section ul.citations li:nth-child(1) {
- margin-top: 20px;
- padding-top: 20px;
- border-top: 1px solid #BBB;
-}
-
-.page .section ul.citations li,
-.page .section ul.references li {
- list-style: outside none none;
-}
-
-.page .section ul.citations li {
- font-size: 80%;
-}
-
-.page .section ul.citations li>span:nth-child(1),
-.page .section ul.references li>span:nth-child(1) {
- display: block;
- float: left;
- text-align: left;
- width: 70px
-}
-
-.page .section ul.citations li>span:nth-child(1) {
- width: 50px
-}
-
-.page .section ul.references li div {
- margin-left: 70px;
-}
-
-.page .section ul.citations li div {
- margin-left: 50px;
-}
-
-.page .section a[href="#"],
-.page .section a[href="#"]:link,
-.page .section a[href="#"]:visited,
-.page .section a[href="#"]:hover,
-.page .section a[href="#"]:focus {
- text-decoration: none;
- color: inherit;
- cursor: text;
- font-style: italic;
-}
-
-
-/* self referential footnotes */
-
-.page .section div[type="selfref"] a[href="#"],
-.page .section div[type="selfref"] a[href="#"]:link,
-.page .section div[type="selfref"] a[href="#"]:visited,
-.page .section div[type="selfref"] a[href="#"]:hover,
-.page .section div[type="selfref"] a[href="#"]:focus {
- font-style: normal;
-}
-
-.page .section div[type="selfref"] span:nth-child(1) {
- display: none;
-}
-
-
-/* page break always after element on pdf/print definition */
-
-div.page-break {
- page-break-inside: always;
-}
-
-div.page-break:before {
- content: ' ';
-}
-
-
-/* no page break inside element on pdf/print definition */
-
-div.nopb {
- page-break-inside: avoid;
-}
-
-/* justify text */
-p {
- text-align: justify;
-}
-
-/* page header and footer */
-
-.pdf-footer,
-.pdf-header {
- margin-top: 20px;
- color: #aaa;
-}
-
-.pdf-header .header-left {
- float: left;
- margin-left: 2em;
- margin-right: auto;
-}
-
-.pdf-header .header-right {
- display: table;
- margin-left: auto;
- margin-right: 2em;
-}
-
-.pdf-footer .sub {
- padding-top: 8px;
- font-size: 70%;
-}
-
-.pdf-header .sub {
- padding-top: 2px;
- font-size: 70%;
-}
-
-.pdf-footer {
- padding-top: 10px;
- border-top: 1px solid #eee;
-}
-
-.pdf-footer .footer-left {
- float: left;
- margin-left: 2em;
- margin-right: auto;
-}
-
-.pdf-footer .footer-center {
- display: table;
- margin-left: auto;
- margin-right: auto;
-}
-
-.pdf-footer .footer-right {
- float: right;
- margin-left: auto;
- margin-right: 2em;
-}
-
-.pdf-header {
- padding-bottom: 10px;
- border-bottom: 1px solid #eee;
-}
-
-.pdf-header .header-pages-count {
- float: right;
- text-align: right;
-}
-
-.pdf-header .header-pages-count a,
-.pdf-header .header-pages-count a:visited,
-.pdf-header .header-pages-count a:active,
-.pdf-header .header-pages-count a:focus,
-.pdf-header .header-pages-count a:link {
- text-decoration: none;
- color: #aaa;
- cursor: text;
-}
+++ /dev/null
-#!/bin/bash
-DOCS_DIR=$(cd $(dirname $0)/.. && pwd)
-BOOKFILE=$DOCS_DIR/../book.json
-
-TITLE=$(grep '"title":' $BOOKFILE | cut -d'"' -f 4)
-SUBTITLE=$(grep '"subtitle":' $BOOKFILE | cut -d'"' -f 4)
-VERSION="Version $(grep '"version":' $BOOKFILE | cut -d'"' -f 4)"
-DATE=$(grep '"published":' $BOOKFILE | cut -d'"' -f 4)
-
-[ -z "$TITLE" ] && { echo "Error TITLE not set!" ; exit 1; }
-[ -z "$VERSION" ] && { echo "Error VERSION not set!" ; exit 1; }
-[ -z "$DATE" ] && { echo "Error DATE not set!" ; exit 1; }
-
-
-cat $(dirname $0)/cover.svg | sed -e "s/{title}/$TITLE/g" \
- -e "s/font-size:87.5px/font-size:54px/g" \
- -e "s/{subtitle}/$SUBTITLE/g" \
- -e "s/font-size:62.5px/font-size:40px/g" \
- -e "s/{version}/$VERSION/g" \
- -e "s/{date}/$DATE/g" \
- > /tmp/cover.svg
-
-# use imagemagick convert tool (cover size must be 1800x2360)
-convert -resize "1600x2160!" -border 100 -bordercolor white -background white \
- -flatten -quality 100 /tmp/cover.svg $DOCS_DIR/cover.jpg
-
-convert -resize "200x262!" $DOCS_DIR/cover.jpg $DOCS_DIR/cover_small.jpg
+++ /dev/null
-#!/bin/bash
-
-OUTFILENAME="Gitbook-Iotbzh-template"
-
-SCRIPT=$(basename $BASH_SOURCE)
-
-function usage() {
- cat <<EOF >&2
-Usage: $SCRIPT [options] [pdf|serve|doxygen]
-
-Options:
- --debug
- enable debug when generating pdf or html documentation
- -d|--dry
- dry run
- -h|--help
- get this help
-
-Example:
- $SCRIPT pdf
-
-EOF
- exit 1
-}
-
-function info() {
- echo "$@" >&2
-}
-
-#default values
-DEBUG_FLAG=""
-DRY=""
-DO_ACTION=""
-OUT_DIR=./build
-
-[[ $? != 0 ]] && usage
-while [ $# -gt 0 ]; do
- case "$1" in
- --debug) DEBUG_FLAG="--log=debug --debug";;
- -d|--dry) DRY=echo;;
- -h|--help) usage;;
- pdf | serve | doxygen) DO_ACTION=$1;;
- --) break;;
- esac
- shift
-done
-
-cd $(dirname $0)
-ROOTDIR=`pwd -P`
-
-# Create out dir if needed
-[ -d $OUT_DIR ] || mkdir -p $OUT_DIR
-
-if [ "$DO_ACTION" = "pdf" -o "$DO_ACTION" = "serve" ]; then
- GITBOOK=`which gitbook`
- [ "$?" = "1" ] && { echo "You must install gitbook first, using: sudo npm install -g gitbook-cli"; exit 1; }
-
- EBCONV=`which ebook-convert`
- [ "$?" = "1" ] && { echo "You must install calibre first, using: 'sudo apt install calibre' or refer to https://calibre-ebook.com/download"; exit 1; }
-
- if [ "$DO_ACTION" = "pdf" ]; then
-
- # Update cover when book.json has been changed
- [[ $ROOTDIR/book.json -nt $ROOTDIR/docs/cover.jpg ]] && { echo "Update cover files"; $ROOTDIR/docs/resources/make_cover.sh || exit 1; }
-
- OUTFILE=$OUT_DIR/$OUTFILENAME.pdf
- $DRY $GITBOOK pdf $ROOTDIR $OUTFILE $DEBUG_FLAG
- [ "$?" = "0" ] && echo "PDF has been successfully generated in $OUTFILE"
- else
- $DRY $GITBOOK serve $DEBUG_FLAG
- fi
-
-elif [ "$DO_ACTION" = "doxygen" ]; then
- $DRY cd $OUT_DIR && cmake .. && make doxygen $ROOTDIR/Doxyfile
-
-else
- echo "Unknown action !"
- usage
-fi
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-CMAKE_MINIMUM_REQUIRED(VERSION 3.3)
-
-include(${CMAKE_CURRENT_SOURCE_DIR}/conf.d/cmake/config.cmake)
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-# Project Info
-# ------------------
-set(PROJECT_NAME example)
-set(PROJECT_VERSION "0.0")
-set(PROJECT_PRETTY_NAME "Example")
-set(PROJECT_DESCRIPTION "AGL application example")
-set(PROJECT_URL "https://gerrit.automotivelinux.org/gerrit/apps/app-templates")
-set(PROJECT_ICON "icon.png")
-set(PROJECT_AUTHOR "Last Name, First Name")
-set(PROJECT_AUTHOR_MAIL "example.man@bigouden.bzh")
-set(PROJECT_LICENSE "APL2.0")
-set(PROJECT_LANGUAGES,"C")
-
-# Where are stored default templates files from submodule or subtree app-templates in your project tree
-# relative to the root project directory
-set(PROJECT_APP_TEMPLATES_DIR "conf.d/app-templates")
-
-# Where are stored your external libraries for your project. This is 3rd party library that you don't maintain
-# but used and must be built and linked.
-# set(PROJECT_LIBDIR "libs")
-
-# Where are stored data for your application. Pictures, static resources must be placed in that folder.
-# set(PROJECT_RESOURCES "data")
-
-# Which directories inspect to find CMakeLists.txt target files
-# set(PROJECT_SRC_DIR_PATTERN "*")
-
-# Compilation Mode (DEBUG, RELEASE)
-# ----------------------------------
-set(CMAKE_BUILD_TYPE "DEBUG")
-
-# Kernel selection if needed. You can choose between a
-# mandatory version to impose a minimal version.
-# Or check Kernel minimal version and just print a Warning
-# about missing features and define a preprocessor variable
-# to be used as preprocessor condition in code to disable
-# incompatibles features. Preprocessor define is named
-# KERNEL_MINIMAL_VERSION_OK.
-#
-# NOTE*** FOR NOW IT CHECKS KERNEL Yocto environment and
-# Yocto SDK Kernel version.
-# -----------------------------------------------
-#set (kernel_mandatory_version 4.8)
-#set (kernel_minimal_version 4.8)
-
-# Compiler selection if needed. Impose a minimal version.
-# -----------------------------------------------
-set (gcc_minimal_version 4.9)
-
-# PKG_CONFIG required packages
-# -----------------------------
-set (PKG_REQUIRED_LIST
- json-c
- libsystemd>=222
- afb-daemon
- libmicrohttpd>=0.9.55
-)
-
-# Prefix path where will be installed the files
-# Default: /usr/local (need root permission to write in)
-# ------------------------------------------------------
-#set(CMAKE_INSTALL_PREFIX $ENV{HOME}/opt)
-
-# Customize link option
-# -----------------------------
-#list(APPEND link_libraries -an-option)
-
-# Compilation options definition
-# Use CMake generator expressions to specify only for a specific language
-# Values are prefilled with default options that is currently used.
-# Either separate options with ";", or each options must be quoted separately
-# DO NOT PUT ALL OPTION QUOTED AT ONCE , COMPILATION COULD FAILED !
-# ----------------------------------------------------------------------------
-#set(COMPILE_OPTIONS
-# -Wall
-# -Wextra
-# -Wconversion
-# -Wno-unused-parameter
-# -Wno-sign-compare
-# -Wno-sign-conversion
-# -Werror=maybe-uninitialized
-# -Werror=implicit-function-declaration
-# -ffunction-sections
-# -fdata-sections
-# -fPIC
-# CACHE STRING "Compilation flags")
-#set(C_COMPILE_OPTIONS "" CACHE STRING "Compilation flags for C language.")
-#set(CXX_COMPILE_OPTIONS "" CACHE STRING "Compilation flags for C++ language.")
-#set(PROFILING_COMPILE_OPTIONS
-# -g
-# -O0
-# -pg
-# -Wp,-U_FORTIFY_SOURCE
-# CACHE STRING "Compilation flags for PROFILING build type.")
-#set(DEBUG_COMPILE_OPTIONS
-# -g
-# -ggdb
-# -Wp,-U_FORTIFY_SOURCE
-# CACHE STRING "Compilation flags for DEBUG build type.")
-#set(CCOV_COMPILE_OPTIONS
-# -g
-# -O2
-# --coverage
-# CACHE STRING "Compilation flags for CCOV build type.")
-#set(RELEASE_COMPILE_OPTIONS
-# -g
-# -O2
-# CACHE STRING "Compilation flags for RELEASE build type.")
-
-# (BUG!!!) as PKG_CONFIG_PATH does not work [should be an env variable]
-# ---------------------------------------------------------------------
-set(CMAKE_PREFIX_PATH ${CMAKE_INSTALL_PREFIX}/lib64/pkgconfig ${CMAKE_INSTALL_PREFIX}/lib/pkgconfig)
-set(LD_LIBRARY_PATH ${CMAKE_INSTALL_PREFIX}/lib64 ${CMAKE_INSTALL_PREFIX}/lib)
-
-# Optional location for config.xml.in
-# -----------------------------------
-#set(WIDGET_ICON conf.d/wgt/${PROJECT_ICON} CACHE PATH "Path to the widget icon")
-#set(WIDGET_CONFIG_TEMPLATE ${CMAKE_CURRENT_SOURCE_DIR}/conf.d/wgt/config.xml.in CACHE PATH "Path to widget config file template (config.xml.in)")
-
-# Mandatory widget Mimetype specification of the main unit
-# --------------------------------------------------------------------------
-# Choose between :
-#- text/html : HTML application,
-# content.src designates the home page of the application
-#
-#- application/vnd.agl.native : AGL compatible native,
-# content.src designates the relative path of the binary.
-#
-# - application/vnd.agl.service: AGL service, content.src is not used.
-#
-#- ***application/x-executable***: Native application,
-# content.src designates the relative path of the binary.
-# For such application, only security setup is made.
-#
-set(WIDGET_TYPE MimeType_Not_Set)
-
-# Mandatory Widget entry point file of the main unit
-# --------------------------------------------------------------
-# This is the file that will be executed, loaded,
-# at launch time by the application framework.
-#
-set(WIDGET_ENTRY_POINT EntryPoint_Path_Not_Set)
-
-# Optional dependencies order
-# ---------------------------
-#set(EXTRA_DEPENDENCIES_ORDER)
-
-# Optional Extra global include path
-# -----------------------------------
-#set(EXTRA_INCLUDE_DIRS)
-
-# Optional extra libraries
-# -------------------------
-#set(EXTRA_LINK_LIBRARIES)
-
-# Optional force binding Linking flag
-# ------------------------------------
-# set(BINDINGS_LINK_FLAG LinkOptions )
-
-# Optional force package prefix generation, like widget
-# -----------------------------------------------------
-# set(PKG_PREFIX DestinationPath)
-
-# Optional Application Framework security token
-# and port use for remote debugging.
-#------------------------------------------------------------
-set(AFB_TOKEN "" CACHE PATH "Default binder security token")
-set(AFB_REMPORT "1234" CACHE PATH "Default binder listening port")
-
-# Print a helper message when every thing is finished
-# ----------------------------------------------------
-set(CLOSING_MESSAGE "Typical binding launch: afb-daemon --port=${AFB_REMPORT} --workdir=${CMAKE_BINARY_DIR}/package --ldpaths=lib --roothttp=htdocs --token=\"${AFB_TOKEN}\" --tracereq=common --verbose")
-set(PACKAGE_MESSAGE "Install widget file using in the target : afm-util install ${PROJECT_NAME}.wgt")
-
-# Optional schema validator about now only XML, LUA and JSON
-# are supported
-#------------------------------------------------------------
-#set(LUA_CHECKER "luac" "-p" CACHE STRING "LUA compiler")
-#set(XML_CHECKER "xmllint" CACHE STRING "XML linter")
-#set(JSON_CHECKER "json_verify" CACHE STRING "JSON linter")
-
-# This include is mandatory and MUST happens at the end
-# of this file, else you expose you to unexpected behavior
-# -----------------------------------------------------------
-include(${PROJECT_APP_TEMPLATES_DIR}/cmake/common.cmake)
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<widget xmlns="http://www.w3.org/ns/widgets" id="@PROJECT_NAME@" version="@PROJECT_VERSION@">
- <name>@PROJECT_NAME@</name>
- <icon src="@PROJECT_ICON@"/>
- <content src="@WIDGET_ENTRY_POINT@" type="@WIDGET_TYPE@"/>
- <description>@PROJECT_DESCRIPTION@</description>
- <author>@PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@></author>
- <license>@PROJECT_LICENSE@</license>
-
-<!-- Feature : required-api ------------------------------------------------------
-#### param name="#target" OPTIONAL
-
-Declares the name of the unit requiring the listed apis.
-Only one instance of the param "#target" is allowed.
-When there is not instance of this param, it behave as if
-the target main was specified.
-
-#### param name=[required api name]
-
-The name is the name of the required API.
-The value describes how to connect to the required api.
-It is either:
-
- - local: The binding is a local shared object.
- In that case, the name is the relative path of the
- shared object to be loaded.
- - auto: The framework set automatically the kind of
- the connection to the API
- - ws: The framework connect using internal websockets
- - dbus: The framework connect using internal dbus
- - link: The framework connect in memory by dinamically linking
-
-Example:
- <feature name="urn:AGL:widget:required-api">
- <param name="#target" value="low-can" />
- <param name="<a-required-api>" value="auto" />
- <param name="<another-required-api>" value="auto" />
- </feature>
---------------------------------------------------------------------------------->
-
-<!-- Feature : required-permission ------------------------------------------
-
-List of the permissions required by the unit.
-Each required permission must be explicited using a <param> entry.
-
-#### param name="#target" OPTIONAL
-
-Declares the name of the unit requiring the listed permissions.
-Only one instance of the param "#target" is allowed.
-When there is not instance of this param, it behave as if
-the target main was specified.
-
-#### param name=[required permission name]
-
-The value is either:
-- required: the permission is mandatorily needed except if the feature
-isn't required (required="false") and in that case it is optional.
-- optional: the permission is optional
-
-Example:
-<feature name="urn:AGL:widget:required-permission">
- <param name="#target" value="geoloc" />
- <param name="urn:AGL:permission:real-time" value="required" />
- <param name="urn:AGL:permission:syscall:*" value="required" />
-</feature>
---------------------------------------------------------------------------------->
-
-<!-- Feature : provided-unit -------------------------------------------------
-This feature is made for declaring new units
-for the widget. Using this feature, a software publisher
-can provide more than one application in the same widget.
-
-#### param name="#target" REQUIRED
-
-Declares the name of the unit. The default unit, the unit
-of the main of the widget, has the name "main". The value
-given here must be unique within the widget file. It will
-be used in other places of the widget config.xml file to
-designate the unit.
-
-Only one instance of the param "#target" is allowed.
-The value can't be "main".
-
-#### param name="content.type" REQUIRED
-
-The mimetype of the provided unit.
-
-#### param name="content.src"
-
-A path to the file (subject to localisation), this is the entry point
-to that unit.
-
-#### other parameters
-
-The items that can be set for the main unit
-can also be set using the params if needed.
-
- - description
- - name.content
- - name.short
- - ...
-
-Example:
-<feature name="urn:AGL:widget:provided-unit">
- <param name="#target" value="geoloc" />
- <param name="description" value="binding of name geoloc" />
- <param name="content.src" value="index.html" />
- <param name="content.type" value="application/vnd.agl.service" />
-</feature>
---------------------------------------------------------------------------------->
-
-<!-- Feature: provided-api ---------------------------------------------------
-Use this feature for exporting one or more API of a unit
-to other widgets of the platform.
-
-This feature is an important feature of the framework.
-
-#### param name="#target" OPTIONAL
-
-Declares the name of the unit exporting the listed apis.
-Only one instance of the param "#target" is allowed.
-When there is not instance of this param, it behave as if
-the target main was specified.
-
-#### param name=[name of exported api]
-
-The name give the name of the api that is exported.
-
-The value is one of the following values:
-
-- ws: export the api using UNIX websocket
-- dbus: export the API using dbus
-- auto: export the api using the default method(s).
-
-Example:
-<feature name="urn:AGL:widget:provided-api">
- <param name="#target" value="geoloc" />
- <param name="geoloc" value="auto" />
- <param name="moonloc" value="auto" />
-</feature>
---------------------------------------------------------------------------------->
-</widget>
+++ /dev/null
-XDS_PROJECT_ID=W2EAQBA-HQI75XA_unicens2-binding
-XDS_SDK_ID=poky-agl_aarch64_3.99.1+snapshot
-XDS_SERVER_URL=localhost:8000
-
-DOCKER_TARGET=docker-sdk
-
-RSYNC_TARGET=root@192.168.168.11
-RSYNC_PREFIX=./opt
-PROJECT_DIR=/home/seb/tmp/unicens2-binding
-
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8"?>
-<widget xmlns="http://www.w3.org/ns/widgets" id="@PROJECT_NAME@" version="@PROJECT_VERSION@">
- <name>@PROJECT_NAME@</name>
- <icon src="@PROJECT_ICON@"/>
- <content src="@WIDGET_ENTRY_POINT@" type="@WIDGET_TYPE@"/>
- <description>@PROJECT_DESCRIPTION@</description>
- <author>@PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@></author>
- <license>@PROJECT_LICENSE@</license>
-</widget>
+++ /dev/null
-Format: @PROJECT_VERSION@
-Source: @NPKG_PROJECT_NAME@
-Binary: @NPKG_PROJECT_NAME@-bin
-Architecture: any
-Version: 2.0-0
-Maintainer: @PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@>
-Standards-Version: 3.8.2
-Homepage: @PROJECT_URL@
-Build-Depends: debhelper (>= 5),
- pkg-config,
- cmake,
- gcc,
- g++,
-@DEB_PKG_DEPS@
-Debtransform-Tar: @NPKG_PROJECT_NAME@_@PROJECT_VERSION@.orig.tar.gz
+++ /dev/null
-/opt/AGL/*
-/etc/profile.d/*
+++ /dev/null
-@NPKG_PROJECT_NAME@ (@PROJECT_VERSION@-0) UNRELEASED; urgency=low
-
- * init build
-
- -- @PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@> Mon, 25 Dec 2007 10:50:38 +0100
+++ /dev/null
-Priority: optional
-Maintainer: @PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@>
-Source: @NPKG_PROJECT_NAME@
-Build-Depends: debhelper (>= 5),
- pkg-config,
- cmake,
- gcc,
- g++,
-@DEB_PKG_DEPS@
-Standards-Version: 3.8.2
-Homepage: @PROJECT_URL@
-
-Package: @NPKG_PROJECT_NAME@
-Section: libs
-Architecture: any
-Description: @PROJECT_DESCRIPTION@
+++ /dev/null
-#!/usr/bin/make -f
-# -*- makefile -*-
-# Uncomment this to turn on verbose mode.
-export DH_VERBOSE=1
-
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-CFLAGS = -Wall -g
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
- CFLAGS += -O0
-else
- CFLAGS += -O2
-endif
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
- INSTALL_PROGRAM += -s
-endif
-
-configure: configure-stamp
-configure-stamp:
- dh_testdir
- #
- touch configure-stamp
-
-build: build-stamp
-build-stamp: configure-stamp
- dh_testdir
- mkdir -p build
- cd build;cmake ../ -DCMAKE_INSTALL_PREFIX:PATH=/opt/AGL/@PROJECT_NAME@ -DCMAKE_INSTALL_LIBDIR:PATH=lib/$(DEB_HOST_MULTIARCH);$(MAKE)
- #
- touch build-stamp
-
-clean:
- #dh_testdir
- dh_testroot
- rm -f configure-stamp build-stamp
- [ ! -f Makefile ] || $(MAKE) distclean
- #dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_prep
- dh_installdirs
- # Add here commands to install the package into debian/tmp
- mkdir -p debian/tmp/opt/AGL/@PROJECT_NAME@;cd build;make populate;cp -r package/* ../debian/tmp/opt/AGL/@PROJECT_NAME@/
- mkdir -p debian/tmp/etc/profile.d
- echo '#---------- AGL @PROJECT_NAME@ options Start ---------" ' > debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- echo '# Object: AGL cmake option for binder/bindings' >> debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- echo 'export LD_LIBRARY_PATH=/opt/AGL/@PROJECT_NAME@/lib/$(DEB_HOST_MULTIARCH):$$LD_LIBRARY_PATH' >> debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- echo 'export LIBRARY_PATH=/opt/AGL/@PROJECT_NAME@/lib/$(DEB_HOST_MULTIARCH):$$LIBRARY_PATH' >> debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- echo 'export PATH=/opt/AGL/@PROJECT_NAME@/bin:$$PATH' >> debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- echo '#---------- AGL options End ---------' >> debian/tmp/etc/profile.d/AGL_@PROJECT_NAME@.sh
- # Move all files in their corresponding package
- dh_install --list-missing -s --sourcedir=debian/tmp
- # empty dependency_libs in .la files
- #sed -i "/dependency_libs/ s/'.*'/''/" `find debian/ -name '*.la'`
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
- dh_installchangelogs
- dh_installdocs
- dh_installexamples
- dh_installman
- dh_link
- dh_strip
- dh_compress
- dh_fixperms
- dh_makeshlibs -V
- dh_installdeb
- dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
+++ /dev/null
-# gdb-remote.init file for IDE
-# Object: allow to use standard gdb to remote debug a target
-# Usage: remote-target-populate update script under ./build directory
-# Author: Fulup Ar Foll (IoT.bzh)
-# Reference: https://blog.flameeyes.eu/2010/02/remote-debugging-with-gdb-part-2-gdb/
-#
-# Warning:
-# - on target start with $GDB ./target/gdb-cross-root@$TARGET.ini
-# - Netbeans impose debug-command to point on a local instance of afb-daemon binary
-# - --ldpath should be absolute as solib-search-path refuse to work as documented
-
-# xds-gdb annotation to point where it should
-# :XDS-ENV: XDS_PROJECT_ID=@XDS_PROJECT_ID@
-# :XDS-ENV: XDS_SDK_ID=@XDS_SDK_ID@
-# :XDS-ENV: XDS_SERVER_URL=@XDS_SERVER_URL@
-
-# Start gdbserver on target and connect through SSH link WARNING:
-target remote | ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null @RSYNC_TARGET@ gdbserver - \
- /usr/bin/afb-daemon --port=@AFB_REMPORT@ --workdir=@RSYNC_PREFIX@/@PROJECT_NAME@ --roothttp=htdocs --ldpaths=@RSYNC_PREFIX@/@PROJECT_NAME@/lib --verbose --token=@AFB_TOKEN@
-
-# Disable auto answer no on questions and to set breakpoint
-set confirm off
-
-# Disable auto load of libraries to improved perf
-set auto-solib-add off
-
-# Define path for project libraries
-set solib-search-path ${PROJECT_PKG_BUILD_DIR}
-
-# Replace run by continue done by xds-gdb
-
-# Manually load project libraries when loaded by afb-daemon
-tbreak @GDB_INITIAL_BREAK@
-commands
-sharedlibrary @RSYNC_PREFIX@/@PROJECT_NAME@
-continue
-end
-
-
+++ /dev/null
-#!/bin/sh
-#
-# File: install-wgt-on-target.sh
-# Author: Sebastien Douheret @ IoT.bzh
-# Object: install widget on target
-# Created on 24-May-2017, 09:23:37
-# Usage:
-
-# Do not change manually use 'make remote-target-populate'
-export RSYNC_TARGET=@RSYNC_TARGET@
-export WGT_FILE_L=@CMAKE_CURRENT_BINARY_DIR@/@PROJECT_NAME@.wgt
-export WGT_FILE_T=/tmp/@PROJECT_NAME@.wgt
-
-scp $WGT_FILE_L $RSYNC_TARGET:$WGT_FILE_T \
- && ssh -o "StrictHostKeyChecking no" -tt $RSYNC_TARGET -- \
- afm-util install $WGT_FILE_T
-
-# && rm -f $WGT_FILE_T
-
+++ /dev/null
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: @PROJECT_AUTHOR@ <@PROJECT_AUTHOR_MAIL@>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-Name: @NPKG_PROJECT_NAME@
-Version: @PROJECT_VERSION@
-Release: 1
-Group: AGL
-License: @PROJECT_LICENSE@
-Summary: @PROJECT_DESCRIPTION@
-Url: @PROJECT_URL@
-Source0: %{name}_%{version}.orig.tar.gz
-
-BuildRequires: cmake
-BuildRequires: gcc gcc-c++
-@RPM_PKG_DEPS@
-
-BuildRoot: %{_tmppath}/%{name}-%{version}-build
-
-%define _prefix /opt/AGL/@PROJECT_NAME@
-%define __cmake cmake
-
-%description
-@PROJECT_DESCRIPTION@
-
-%prep
-%setup -q
-
-%build
-%cmake -DCMAKE_INSTALL_PREFIX:PATH=%{_libdir}
-make %{?_smp_mflags}
-
-%install
-CURDIR=$(pwd)
-[ -d build ] && cd build
-make populate
-mkdir -p %{?buildroot}%{_prefix}
-cp -r package/* %{?buildroot}%{_prefix}
-
-cd $CURDIR
-find %{?buildroot}%{_prefix} -type d -exec echo "%dir {}" \;>> pkg_file
-find %{?buildroot}%{_prefix} -type f -exec echo "{}" \;>> pkg_file
-sed -i 's@%{?buildroot}@@g' pkg_file
-
-
-%files -f pkg_file
-%defattr(-,root,root)
+++ /dev/null
-#!/bin/sh
-#
-# File: start-on-target.sh
-# Author: Fulup Ar Foll @ IoT.bzh
-# Object: Forward signal (SIGTERM) to remote process
-# Created on 24-May-2017, 09:23:37
-# Usage: remote-target-populate update script under ./build directory
-
-# Do not change manually use 'make remote-target-populate'
-export RSYNC_TARGET=@RSYNC_TARGET@
-export PROJECT_NAME=@PROJECT_NAME@
-export RSYNC_PREFIX=@RSYNC_PREFIX@/@PROJECT_NAME@
-export AFB_REMPORT=@AFB_REMPORT@
-export AFB_TOKEN=@AFB_TOKEN@
-
-exec ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -tt $RSYNC_TARGET << EOF
- afb-daemon --workdir=$RSYNC_PREFIX --monitoring --port=$AFB_REMPORT --roothttp=./htdocs --ldpath=./lib --verbose --token=$AFB_TOKEN &
- PID_DAEMON=\$!
- trap "echo REMOTE-SIGNAL TRAP; kill -15 \$PID_DAEMON" INT QUIT TERM EXIT
- echo "Target Process Waiting for command"
-
- # wait for daemon to finish
- wait \$PID_DAEMON
- exit
-EOF
+++ /dev/null
-#
-# Cmake generated Do Not Edit
-#
-# Template: conf.d/app-templates/template.d/xds-project.conf.in
-# Values: $HOME/.config/app-templates/cmake/xx-projectname-xds.cmake
-#
-# WARNING: in Xdev mode $HOME is ~devel HOME on xds-docker
-#
-export XDS_SERVER_URL=@XDS_SERVER_URL@
-export XDS_PROJECT_ID=@XDS_PROJECT_ID@
-export XDS_SDK_ID=@XDS_SDK_ID@
-
# Where are stored default templates files from submodule or subtree app-templates in your project tree
# relative to the root project directory
-set(PROJECT_APP_TEMPLATES_DIR "conf.d/app-templates")
+set(PROJECT_APP_TEMPLATES_DIR "../conf.d/app-templates")
# Where are stored your external libraries for your project. This is 3rd party library that you don't maintain
# but used and must be built and linked.
#include "utils.h"
+#ifndef MAX_PATH
+#define MAX_PATH 1024
+#endif
+
#define DBFILE "/ll-database-binding.db"
#define USERNAME "agl"
#define APPNAME "firefox"
// ----- Globals -----
DB* database;
-char* database_file;
+char database_file[MAX_PATH];
// ----- Binding's declarations -----
int ll_database_binding_init();
{
struct passwd pwd;
struct passwd* result;
- char* buf;
+ char buf[MAX_PATH];
size_t bufsize;
int ret;
bufsize = sysconf(_SC_GETPW_R_SIZE_MAX);
- if (bufsize == -1) bufsize = 16384;
- buf = malloc(bufsize);
- if (buf == NULL)
- {
- AFB_ERROR("Allocation failed!");
- return 1;
- }
+ if (bufsize == -1 || bufsize > MAX_PATH) bufsize = MAX_PATH;
ret = getpwuid_r(getuid(), &pwd, buf, bufsize, &result);
if (result == NULL)
{
- free(buf);
if (ret == 0) AFB_ERROR("User not found");
else AFB_ERROR("getpwuid_r failed with %d code", ret);
- return 1;
- }
-
- bufsize = strlen(result->pw_dir) + strlen(DBFILE) + 1;
- database_file = malloc(bufsize);
- if (database_file == NULL)
- {
- free(buf);
- AFB_ERROR("Allocation failed!");
- return 1;
+ return ret ? ret : -1;
}
- memset(database_file, 0, bufsize);
+ memset(database_file, 0, MAX_PATH);
strcat(database_file, result->pw_dir);
strcat(database_file, DBFILE);
- free(buf);
AFB_INFO("The database file is '%s'", database_file);
if ((ret = db_create(&database, NULL, 0)) != 0)
{
AFB_ERROR("Failed to create database: %s.", db_strerror(ret));
- free(database_file);
return 1;
}
{
AFB_ERROR("Failed to open the '%s' database: %s.", database_file, db_strerror(ret));
database->close(database, 0);
- free(database_file);
return 1;
}
Code Review / apps / agl-service-data-persistence.git / commitdiff
