Support R-Car M2 porter board

Now agl-image-ivi become bootable on R-Car M2 porter board.

For more information and instruction to build and run,
see README.md.

Change-Id: I1a99634695305546dc27d2fa8dc0e5bcdff3ab39
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>

diff --git a/README.md b/README.md
index 74c0f89..e44d94c 100644 (file)
--- a/README.md
+++ b/README.md
@@ -15,6 +15,12 @@ URI: git://git.openembedded.org/meta-openembedded
 > branch:   dizzy
 > revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97
 
+## The Renesas R-Car Gen2 (Porter) board depends in addition on: ##
+
+URI: https://gerrit.automotivelinux.org/gerrit/p/AGL/meta-renesas.git
+> branch:   agl-1.0-bsp-1.8.0
+> revision: 0a69b07cfca17d1435f2bc7bf779139c5fac09a3
+
 Layers
 ------
 
@@ -22,7 +28,7 @@ There are 2 sub-layers in top-level `meta-agl`.
 
 `meta-agl` is a layer which contains AGL common and middleware packages.
 > meta-agl/meta-agl
-  
+
 `meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU).
 > meta-agl/meta-agl-bsp
 
@@ -55,6 +61,7 @@ Supported Machine
 -----------------
 
 * QEMU (x86-64) - emulated machine: qemux86-64
+* Renesas R-Car Gen2 (R-Car M2) - machine: porter
 
 Supported Target of bitbake
 ------------------------
@@ -64,6 +71,24 @@ Supported Target of bitbake
 * `agl-image-minimal` For internal use to develop distribution (experimental)
 * `agl-image-weston`  For internal use to develop distribution (experimental)
 
+Supposed Directory Trees of Layers to build
+-------------------------------------------
+
+* For QEMU
+
+      ${TOPDIR}/
+                meta-agl/
+                meta-openembedded/
+                poky/
+
+* For R-Car M2
+
+      ${TOPDIR}/
+                meta-agl/
+                meta-openembedded/
+                meta-renesas/
+                poky/
+
 Build a QEMU image
 ------------------
 
@@ -72,7 +97,7 @@ You can build a QEMU image using the following steps:
 1. Export TEMPLATECONF to pick up correct configuration for the build
    > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf
 
-2. Rune the following command:
+2. Run the following command:
    > $ source poky/oe-init-build-env
 
 3. Build the minimal image of AGL Distribution
@@ -85,3 +110,59 @@ You can build a QEMU image using the following steps:
    > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode_option=1280x720-32"
 
 5. Some weston samples are available from weston terminal.
+
+Build a R-Car M2 (porter) image
+-------------------------------
+
+### Software setup
+
+#### Obtain and Install Renesas Graphics Drivers
+
+See [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#M2_Porter_low_cost_board) and get 2 ZIP files from the link there.
+
+Note: You have to copy files manually because there is no shell-script
+in the current meta-renesas.
+
+1. Unzip the two downloads into a folder. In this example a temporary directory is used.
+        $ cd $HOME/AGL
+        $ mkdir binary-tmp
+        $ <unzip the two downloads into binary-tmp>
+
+   After this step there should be two files in binary-tmp:
+        R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
+        R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
+
+2. Extract 2 tar.gz
+        tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz
+        tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz
+
+3. Copy 2 files manually
+   1. Locate EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 in the graphics
+   driver deliverable and copy it into the BSP layer. (need rename)
+          cp <path_to_file>/EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \
+          meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\
+          gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2
+
+   2. Locate SGX_KM_M2.tar.bz2 in the graphics driver deliverable and copy
+   it into the BSP layer.
+          cp <path_to_file>SGX_KM_M2.tar.bz2 \
+          meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module
+
+#### Build from the Source code
+
+You can build a R-Car2 M2 (porter) image using the following steps:
+
+1. Export TEMPLATECONF to pick up correct configuration for the build
+   > $ export TEMPLATECONF=/full/path/to/meta-renesas/meta-rcar-gen2/conf
+
+2. Run the following command:
+   > $ source poky/oe-init-build-env
+
+3. Build the minimal image of AGL Distribution
+   > $ bitbake agl-image-ivi
+
+### Deployment (SDCARD)
+
+Follow the instructions [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29)
+
+Note: Use `agl-image-ivi-porter.tar.bz2` as name of root file system archive.