--- /dev/null
+# An example configuration file for MPD
+# See the mpd.conf man page for a more detailed description of each parameter.
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory "%music_directory%"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "%playlist_directory%"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "%db_file%"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file "%log_file%"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+#pid_file "/var/run/mpd/mpd.pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "%state_file%"
+#
+# The location of the sticker database. This is a database which
+# manages dynamic information attached to songs.
+#
+#sticker_file "~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+user "mpd"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+group "audio"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon.
+#
+# For network
+bind_to_address "any"
+#
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. Optionally, 'comment' can be added to this
+# list.
+#
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself. There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks "yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks "yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# can setting can be specified multiple times for different password profiles.
+#
+#password "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions "read,add,control,admin"
+#
+###############################################################################
+
+
+# Input #######################################################################
+#
+
+input {
+ plugin "curl"
+# proxy "proxy.isp.com:8080"
+# proxy_user "user"
+# proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
+# other audio outputs.
+#
+# board specific examples #####################################################
+# (feel free to add futher)
+#
+# gumstix overo (tested with TOBI expansion board)
+#audio_output {
+# type "alsa"
+# name "overo"
+# mixer_control "Headset"
+# mixer_index "0"
+#}
+#
+# general examples ############################################################
+#
+# An example of an ALSA output:
+#
+#audio_output {
+# type "alsa"
+# name "My ALSA Device"
+## device "hw:0,0" # optional
+## format "44100:16:2" # optional
+## mixer_type "hardware" # optional
+## mixer_device "default" # optional
+## mixer_control "PCM" # optional
+## mixer_index "0" # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+## device "/dev/dsp" # optional
+## format "44100:16:2" # optional
+## mixer_type "hardware" # optional
+## mixer_device "/dev/mixer" # optional
+## mixer_control "PCM" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# encoding "ogg" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+## protocol "icecast2" # optional
+## user "source" # optional
+## description "My Stream Description" # optional
+## genre "jazz" # optional
+## public "no" # optional
+## timeout "2" # optional
+## mixer_type "software" # optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+# type "recorder"
+# name "My recorder"
+# encoder "vorbis" # optional, vorbis or lame
+# path "/var/lib/mpd/recorder/mpd.ogg"
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+# type "httpd"
+# name "My HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
+# port "8000"
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+# max_clients "0" # optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+## server "remote_server" # optional
+## sink "remote_server_sink" # optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+# type "pipe"
+# name "my pipe"
+# command "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+# command "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+# command "nc example.org 8765"
+# format "44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+# type "null"
+# name "My Null Output"
+# mixer_type "none" # optional
+#}
+#
+# This setting will change all decoded audio to be converted to the specified
+# format before being passed to the audio outputs. By default, this setting is
+# disabled.
+#
+#audio_output_format "44100:16:2"
+#
+# If MPD has been compiled with libsamplerate support, this setting specifies
+# the sample rate converter to use. Possible values can be found in the
+# mpd.conf man page or the libsamplerate documentation. By default, this is
+# setting is disabled.
+#
+#samplerate_converter "Fastest Sinc Interpolator"
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album" or "track". See <http://www.replaygain.org>
+# for more details. This setting is off by default.
+#
+#replaygain "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp "0"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization "no"
+#
+###############################################################################
+
+
+# MPD Internal Buffering ######################################################
+#
+# This setting adjusts the size of internal decoded audio buffering. Changing
+# this may have undesired effects. Don't change this if you don't know what you
+# are doing.
+#
+#audio_buffer_size "2048"
+#
+# This setting controls the percentage of the buffer which is filled before
+# beginning to play. Increasing this reduces the chance of audio file skipping,
+# at the cost of increased time prior to audio playback.
+#
+#buffer_before_play "10%"
+#
+###############################################################################
+
+
+# Resource Limitations ########################################################
+#
+# These settings are various limitations to prevent MPD from using too many
+# resources. Generally, these settings should be minimized to prevent security
+# risks, depending on the operating resources.
+#
+#connection_timeout "60"
+#max_connections "10"
+#max_playlist_length "16384"
+#max_command_list_size "2048"
+#max_output_buffer_size "8192"
+#
+###############################################################################
+
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset "UTF-8"
+#
+# This setting controls the encoding that ID3v1 tags should be converted from.
+#
+#id3v1_encoding "ISO-8859-1"
+#
+###############################################################################
+
+
+# SIDPlay decoder #############################################################
+#
+# songlength_database:
+# Location of your songlengths file, as distributed with the HVSC.
+# The sidplay plugin checks this for matching MD5 fingerprints.
+# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
+#
+# default_songlength:
+# This is the default playing time in seconds for songs not in the
+# songlength database, or in case you're not using a database.
+# A value of 0 means play indefinitely.
+#
+# filter:
+# Turns the SID filter emulation on or off.
+#
+#decoder {
+# plugin "sidplay"
+# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
+# default_songlength "120"
+# filter "true"
+#}
+#
+###############################################################################
+
Code Review / AGL / meta-agl-demo.git / blobdiff