AGL/meta-agl.git
7 years agoIntel Joule: updated to kernel 4.4.36 and fixed a build failure 37/8237/2
Kien Dinh [Fri, 13 Jan 2017 05:24:23 +0000 (14:24 +0900)]
Intel Joule: updated to kernel 4.4.36 and fixed a build failure
due to the move to Yocto 2.2

Change-Id: I9302ecde21f3cd33c903a5391f47d574d57308ec
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
7 years agoprevent used of mesa-gl and bad use of mesa 47/8247/1
Ronan [Fri, 13 Jan 2017 09:34:34 +0000 (10:34 +0100)]
prevent used of mesa-gl and bad use of mesa

 * use PREFERRED_RPROVIDER_libgbm-dev = "libgbm to prevent used of mesa
 * use PREFERRED_PROVIDER_virtual/mesa = "mesa" to prevent used of mesa-gl
 * https://patchwork.openembedded.org/patch/120281/

Change-Id: Ib03137b6a3f2c58ccfc2b9bc568572cc3be802aa
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoDefine IMAGE_FSTYPES for rpi targets 35/8235/1
Jan-Simon Möller [Thu, 12 Jan 2017 21:02:46 +0000 (22:02 +0100)]
Define IMAGE_FSTYPES for rpi targets

Do use our target filesystem types instead of the
defaults in meta-raspberrypi.

Change-Id: If92013a5a55208f4f644f5c2b239e0052ce370c8
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoImprove configuration file for rpi2 and rpi3 for morty. 23/8223/2
Jan-Simon Möller [Wed, 11 Jan 2017 21:44:09 +0000 (22:44 +0100)]
Improve configuration file for rpi2 and rpi3 for morty.

Change-Id: I3683edc0638f1ceda0c53d96532276aafb3633fc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoWorkaround failing QA check in ti-sgx-ddk-um 15/8215/2
Jan-Simon Möller [Wed, 11 Jan 2017 19:06:56 +0000 (20:06 +0100)]
Workaround failing QA check in ti-sgx-ddk-um

This adds another INSANE_SKIP to avoid a new QA check from failing the build.

Change-Id: Ia46f531349c515e68889022edc40cf94ece19654
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoRevert back to kernel 4.4 until bsp layer catches up 17/8217/1
Jan-Simon Möller [Wed, 11 Jan 2017 20:55:01 +0000 (21:55 +0100)]
Revert back to kernel 4.4 until bsp layer catches up

Our bsp adaptation hardcodes the srcrev of the kernel.
Thus we stay on 4.4 until ported.

Change-Id: I30f962674cdb567c378fac62cde98bc1cf0f2c1e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoDisable gstreamer plugins on vayu due to FTBS on morty 11/8211/2
Jan-Simon Möller [Wed, 11 Jan 2017 13:56:27 +0000 (14:56 +0100)]
Disable gstreamer plugins on vayu due to FTBS on morty

The three gstreamer plugins do not build right now.
Disable until fixed.

Change-Id: Ie3d60c88fc73423509dbf36055f7585ab8e81e30
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoRemove agl-sota from ci builds until fixed for morty 13/8213/1
Jan-Simon Möller [Wed, 11 Jan 2017 13:58:23 +0000 (14:58 +0100)]
Remove agl-sota from ci builds until fixed for morty

Change-Id: I041d13aa77802708beeea92bd25df59a1c56cc4a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agometa-oic: Hotfix to use tools from sysroot before system PATH 09/8109/2
Philippe Coval [Mon, 9 Jan 2017 10:23:40 +0000 (11:23 +0100)]
meta-oic: Hotfix to use tools from sysroot before system PATH

Prevent pkg-config not found issue

This patch was in iotivity 1.1-rel branch,
 and (wrongly) removed in 1.2.0

So it needed to be reintroduced in upstream 1.2-rel
 and as a patch for 1.2.0, track upstream bug at:
 https://jira.iotivity.org/browse/IOT-1219

Bug-AGL: SPEC-158

Thanks-to: Alison Chaiken
Change-Id: I6af59a590f8be489398623d29cf85c2f00000002
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
7 years agoRename stale bbappend file for gstreamer 97/8197/1
Jan-Simon Möller [Tue, 10 Jan 2017 21:34:41 +0000 (22:34 +0100)]
Rename stale bbappend file for gstreamer

gstreamer1.0-plugins-bad_1.6.3.bbappend does not longer
work in meta-agl-bsp/meta-ti/recipes-arago/gstreamer/.

Rename it to gstreamer1.0-plugins-bad_1.6.3.bbappend.CHECKME
and create bug: SPEC-407

Change-Id: I74720c0096105fff2dae646ee5b3664ef2ff6610
Bug-AGL: SPEC-407
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoFix version of mesa in rpi templates 95/8195/1
Jan-Simon Möller [Tue, 10 Jan 2017 21:10:17 +0000 (22:10 +0100)]
Fix version of mesa in rpi templates

Change-Id: I977a247c07b3520876ef9738a974e74649304516
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoAdd fix for gnutls which is not in morty, yet 93/8193/2
Jan-Simon Möller [Tue, 10 Jan 2017 20:58:37 +0000 (21:58 +0100)]
Add fix for gnutls which is not in morty, yet

This fix was posted here for master, but not yet submitted to morty:
https://patchwork.openembedded.org/patch/133002/

Change-Id: I51a279347c1d652e3a9335c0680d2ac4bcff6cf6
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoRemove firmware files from local.conf template 91/8191/1
Jan-Simon Möller [Tue, 10 Jan 2017 20:57:22 +0000 (21:57 +0100)]
Remove firmware files from local.conf template

The packages does not exist anymore or was renamed.

Change-Id: I6a2203dd23fe6ae61adb1daaf2b24ae84f114589
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agofix mesa version for yocto morty 55/8155/2
Ronan [Mon, 9 Jan 2017 10:49:14 +0000 (11:49 +0100)]
fix mesa version for yocto morty

Change-Id: I6ef9fb754a2d71aff1eae78ffde40c45a86362b5
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix intel build for linux-firmware 57/8157/2
Ronan [Mon, 9 Jan 2017 13:24:10 +0000 (14:24 +0100)]
fix intel build for linux-firmware

Change-Id: I565bdf1ac23b19bbdc65401cd0843f8a8de1b2b7
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix tar command option 53/8153/2
Ronan [Mon, 9 Jan 2017 07:36:26 +0000 (08:36 +0100)]
fix tar command option

 * the option "-C XXX" must be set in first position.

Change-Id: I89f21e9491a03d53ee9ed047e2ae267ad481fdf6
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix build with gcc6 51/8151/2
Ronan [Mon, 9 Jan 2017 07:35:01 +0000 (08:35 +0100)]
fix build with gcc6

Change-Id: Iebddf4bed98a8216a521b5e8871b4dc111f3716e
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix build with gcc6 49/8149/2
Ronan [Mon, 9 Jan 2017 07:34:23 +0000 (08:34 +0100)]
fix build with gcc6

Change-Id: I1ce6a5f4fb2d04962234d4b2f9bcfe92140cccc9
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoppp:remove fix for linux 4.8 47/8147/2
Ronan [Fri, 6 Jan 2017 09:12:58 +0000 (10:12 +0100)]
ppp:remove fix for linux 4.8

Change-Id: I7e79eaf17546d372d2a2fe0a71f25b0f0a83d6de
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix gcc 6 build 45/8145/2
Ronan [Fri, 6 Jan 2017 09:04:22 +0000 (10:04 +0100)]
fix gcc 6 build

Change-Id: I5ca505da0837c28acc4cb133e9d6acd87d1c7bcc
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix glibc patch 43/8143/2
Ronan [Fri, 6 Jan 2017 08:29:54 +0000 (09:29 +0100)]
fix glibc patch

Change-Id: Ie9cc8476f95a0eb67d630fcd7e8c79239702f780
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix checksum 41/8141/2
Ronan Le Martret [Fri, 14 Oct 2016 11:41:15 +0000 (13:41 +0200)]
fix checksum

Change-Id: I4f0286347cd6bd56b233b6c574736beb73ca4a0f
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
7 years agoaliging Gstreamer prefered with Yocto 2.2 defaults 39/8139/2
Dominig ar Foll [Tue, 25 Oct 2016 13:08:58 +0000 (15:08 +0200)]
aliging Gstreamer prefered with Yocto 2.2 defaults

Change-Id: I3d68f51e7bf1f24b2410071d221d86ecf5837674
Signed-off-by: Dominig ar Foll <dominig.ar.foll@fridu.net>
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.ar.foll@fridu.net>
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agoremove perl fix for openssl, fix in morty 37/8137/2
Ronan [Thu, 5 Jan 2017 16:38:34 +0000 (17:38 +0100)]
remove perl fix for openssl, fix in morty

Change-Id: Icba0d6c2dbcd726387cdd7fdf2e30793b41fe7eb
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoupdate pulseaudio 35/8135/2
Ronan Le Martret [Fri, 14 Oct 2016 11:40:29 +0000 (13:40 +0200)]
update pulseaudio

Change-Id: Ie719895b622ff69a946c8ec4c22e98a03108d38b
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
7 years agoremove useless bbappend 33/8133/2
Ronan Le Martret [Fri, 14 Oct 2016 11:39:52 +0000 (13:39 +0200)]
remove useless bbappend

Change-Id: I674eff45e2900b1cded0f214caeaa2e9e0dfda00
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
7 years agoupdate mesa lib 31/8131/2
Ronan Le Martret [Fri, 14 Oct 2016 11:39:23 +0000 (13:39 +0200)]
update mesa lib

Change-Id: Ib539b9391b95029de425fd8a2edbef1ebad3fbb7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
7 years agoAppend kernel recipe to support config fragments and add common kernel config fragments 27/8127/1
Nathan Illerbrun [Thu, 5 Jan 2017 21:46:13 +0000 (13:46 -0800)]
Append kernel recipe to support config fragments and add common kernel config fragments
Add machine template for nitrogen6x

Change-Id: I63df939008a36d125f80d74d461453c63386e24e
Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com>
7 years agoTest - mitigation of tar-native issue 07/8107/1
Jan-Simon Möller [Sat, 7 Jan 2017 14:50:29 +0000 (15:50 +0100)]
Test - mitigation of tar-native issue

This changeset removes tar-native from ASSUME_PROVIDED in an attempt
to mitigate the tar-native extraction issue that we see on the jenkins slaves.

Is I understand the race-window, tar-native is just being extracted and already
in a preferred PATH while being extracted. The right fix would likely be
to extract first, then change PATH after the file is in place. A way to
do this is being researched.

Change-Id: I0b138a1bd27406e719ab0d711cf542a812fb8460
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoApply bluetooth/smack patches also to rpi kernel 87/8087/1
Jan-Simon Möller [Fri, 6 Jan 2017 00:26:50 +0000 (01:26 +0100)]
Apply bluetooth/smack patches also to rpi kernel

This changeset patches the rpi with the needed changes to
allow bluetooth to work together with smack. The patches were
developed for porter and are a backport of patches submitted
for 4.10+ .

Bug-AGL: SPEC-293

Change-Id: I96d04a709de6ad7843840d9ae154f041173948a2
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agodra7xx-evm: Fix issue with bluetooth pairing 77/8077/1
Karthik Ramanan [Thu, 5 Jan 2017 12:31:23 +0000 (18:01 +0530)]
dra7xx-evm: Fix issue with bluetooth pairing

This patch is ported from meta-agl-extra
Commit details below:

 commit c50805d25ba95473e8b4d1eb28d1203a328cd77a
 Author: José Bollo <jose.bollo@iot.bzh>

Change-Id: I54a40935d6d2bbd9c267985c9e23a14bdffb7a3c
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agoBump gpu_mem_1024 to 640 to inrease gpu memory for apps 73/8073/2
Jan-Simon Möller [Tue, 3 Jan 2017 21:54:00 +0000 (22:54 +0100)]
Bump gpu_mem_1024 to 640 to inrease gpu memory for apps

This change mitigates SPEC-390 by increasing the GPU memory available on the rpi2/rpi3 with 1G RAM to 640M.

Change-Id: I37fc28daa80e78808baa6d04f0b16647914ac65c
Bug-AGL: SPEC-390
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoFix to get netboot activated also for renesas gen3 15/7915/4
Romain Forlot [Tue, 27 Dec 2016 00:44:55 +0000 (00:44 +0000)]
Fix to get netboot activated also for renesas gen3

Change-Id: I9b512a907398de9c96dc46111c74bed4059f7b8e
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
7 years agoAdd entry for official pi touchscreen over DSI port 27/8027/1
Jan-Simon Möller [Mon, 2 Jan 2017 12:58:30 +0000 (13:58 +0100)]
Add entry for official pi touchscreen over DSI port

This change add support for the official touchscreen that is connected throught the DSI-1
port to the board.

Change-Id: If85490ca69310922b8bf314681d1d8459995c61e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agometa-oic: Hotfix to support aarch64 for DragonBoard-410c 81/7981/2
Philippe Coval [Thu, 29 Dec 2016 13:40:39 +0000 (14:40 +0100)]
meta-oic: Hotfix to support aarch64 for DragonBoard-410c

Apply patch from iotivity-1.2.1:

* [PATCH 081/341] yocto: Add aarch64 for DragonBoard-410c

Bug-AGL: SPEC-158
Change-Id: I06f56ae860760002a6376866488e1f55624f50cc
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
7 years agorpi-config: add configurable CMA low and high water marks 89/7989/1
Matt Ranostay [Wed, 28 Dec 2016 05:48:20 +0000 (07:48 +0200)]
rpi-config: add configurable CMA low and high water marks

For dynamically allocating of CMA blocks the low and high water marks
settings determine when the GPU requests or releases memory from the
CPU.

Change-Id: Iad494c101fec0884bb687c5ea51c9657b7c17bd9
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
7 years agolinux-raspberrypi: add ENABLE_CMA options to kernel command line 87/7987/1
Matt Ranostay [Wed, 28 Dec 2016 05:45:15 +0000 (07:45 +0200)]
linux-raspberrypi: add ENABLE_CMA options to kernel command line

Add ENABLE_CMA setting that enables required kernel configuration
to allow the dynamic CMA to function.

Change-Id: I0b0ab0fd7fd64454ea3cc9a89344a98897838e11
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
7 years ago50_local.conf.inc: Enable CMA within the raspberrypi3 template 85/7985/1
Matt Ranostay [Tue, 27 Dec 2016 23:49:05 +0000 (23:49 +0000)]
50_local.conf.inc: Enable CMA within the raspberrypi3 template

Allow the raspberrypi3 GPU to use the CMA dynamic memory split
to boost performance.

Change-Id: Ia72e7b83f7cca2b6b8a622c632345c748547429b
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
7 years agometa-raspberrypi: disable debug logging 19/7919/1
Scott Murray [Wed, 28 Dec 2016 19:14:06 +0000 (14:14 -0500)]
meta-raspberrypi: disable debug logging

Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug
logging by the kernel and systemd that was spamming the console. As a side
benefit, this noticeably speeds up booting.

Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
7 years agometa-ti: weston: remove unneeded ivi shell patches and use standard ivi-controller 89/7889/1
Matt Porter [Tue, 27 Dec 2016 22:50:41 +0000 (00:50 +0200)]
meta-ti: weston: remove unneeded ivi shell patches and use standard ivi-controller

The meta-arago layer included a number of ivi shell patches that are
not needed in AGL. One multi screen patch conflicts with another
bbappend causing build issues as it's already included by a less
specific layer. Further, the added "simple TI layout controller",
autolaunch, and screenshooter features are all unneeded in AGL. These
are removed to reduce the amount of non-essential patches we carry within
AGL. As a result of this, all weston.ini directives which use the
"simple TI layout controller" directives are removed and weston.ini
is switched to use the standard ivi-controller so that WindowManager may
run and access the ILM API. The end result is that WindowManager and
HomeScreen may now be launched after boot successfully.

Change-Id: I8d777fbd4c02acbf9d3ccaeb215b651a8562d5bb
Signed-off-by: Matt Porter <mporter@konsulko.com>
7 years agoUpdate GENIVI Audio Manager to 7.4 for CES2017 demo. 53/7853/2
Toshiaki Isogai [Fri, 23 Dec 2016 11:54:51 +0000 (06:54 -0500)]
Update GENIVI Audio Manager to 7.4 for CES2017 demo.

Change-Id: I8661db791c60feac41814173b666710409480c7c
Signed-off-by: Toshiaki Isogai <tisogai@jp.adit-jv.com>
7 years agometa-intel: Fix for the sdk build failure for Intel platforms 69/7869/1
Kien Dinh [Fri, 23 Dec 2016 13:55:07 +0000 (22:55 +0900)]
meta-intel: Fix for the sdk build failure for Intel platforms

Removed linux-firmware-ibt since it is only necessary for the
Joule platform.

Change-Id: Ia4916fbc777299df4a094874ad1585a43a46d39b
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
7 years agoDisable psplash when building for RPi because of occasional crashes 47/7847/1
Anton Gerasimov [Fri, 23 Dec 2016 10:13:05 +0000 (11:13 +0100)]
Disable psplash when building for RPi because of occasional crashes

Bug-AGL: SPEC-366

Change-Id: Id15035817fcf110d52354fe4822af93d49b8c9ec
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
7 years agodra7xx-evm: weston: Align orientation with psplash 99/7799/5
Karthik Ramanan [Thu, 22 Dec 2016 10:44:49 +0000 (16:14 +0530)]
dra7xx-evm: weston: Align orientation with psplash

The psplash is oriented 180 degrees rotated compared with the
HomeScreen application, this change will ensure that they are in
sync

Change-Id: Ic2a588ff3a061ff500d4050a6915fe5c899a1e7e
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agometa-oic: Hotfix to pull gdbus-codegen from glib-2.0-native 39/7839/1
Philippe Coval [Thu, 22 Dec 2016 21:01:46 +0000 (22:01 +0100)]
meta-oic: Hotfix to pull gdbus-codegen from glib-2.0-native

It was discovered while building iotivity-1.2.0 using Intel BSP

Bug-AGL: SPEC-158
Change-Id: I4c735a276d3a484a330ef1ea8611105e6a84e35a
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
7 years agodra7xx-evm: u-boot: Change default supported display to OSD 97/7797/2
Karthik Ramanan [Thu, 22 Dec 2016 10:03:16 +0000 (15:33 +0530)]
dra7xx-evm: u-boot: Change default supported display to OSD

The latest dra7xx-evm purchased from ti.com comes with the OSD
display, this change will allow the AGL nightly images to work
on the latest dra7xx-evm by default.

If the user has an older EVM, then the uEnv.txt should be modified
to match the connected displays. The complete list of supported
LCDs can be found by checking the /boot folder of the the rootfs.

Change-Id: I7f7ac06a49670eb8b7446a6b27854bee4b76ace6
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agodra7xx-evm: make HomeScreen application fullscreen 95/7795/2
Karthik Ramanan [Thu, 22 Dec 2016 10:01:51 +0000 (15:31 +0530)]
dra7xx-evm: make HomeScreen application fullscreen

Tested and verified on the Rev H EVM with OSD display
Should work on all other supported displays too.

Change-Id: Ib8f210ebf84a0f36fbc87c4553d13ff984874051
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agoRevert "Disable SoC sound driver in porter board" 77/7777/2
Harunobu Kurokawa [Thu, 22 Dec 2016 07:11:41 +0000 (16:11 +0900)]
Revert "Disable SoC sound driver in porter board"

The audio bug is fixed (SPEC-365), so that it should be
revert this commit to enable sound driver.

This reverts commit 1a70e5e8f48f17f604ab243dfb3ff01f7aa435f6.

Change-Id: I362a900e86cdf7888e5726a6a0a56daeb0d33145
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
7 years agoChange kernel config to enable wifi of ralink 45/7745/3
Kazumasa Mitsunari [Wed, 21 Dec 2016 06:12:19 +0000 (15:12 +0900)]
Change kernel config to enable wifi of ralink

This enables wifi dongle of ralink, for example BUFFALO wifi dongle.

Change-Id: Iab408fd5f54feecfadb4f25adab978b0df89d66d
Signed-off-by: Kazumasa Mitsunari <kazumasa_mitsunari_za@mail.toyota.co.jp>
7 years agodra7xx-evm: weston.ini: remove stale test binaries/screens and add required modules 37/7737/2
Matt Porter [Tue, 20 Dec 2016 22:24:19 +0000 (00:24 +0200)]
dra7xx-evm: weston.ini: remove stale test binaries/screens and add required modules

Remove some launched applications that either don't exist or were used for basic
BSP testing. Add drm-backend and ivi-input-controller modules. Fixes weston config
so the HomeScreen can now be launched.

Change-Id: I2c6e507ccd244c26e8b5f5cf0ad0f68ae9a18495
Signed-off-by: Matt Porter <mporter@konsulko.com>
7 years agoEnabling build for Intel's Joule board 89/7689/2
ktdinh [Mon, 19 Dec 2016 14:07:06 +0000 (23:07 +0900)]
Enabling build for Intel's Joule board

This adds neccessary firmware to support the Joule board, including wifi and
bluetooth.

Change-Id: Ia6973415113119aaf60fff0dbb494027fba96fd5
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
7 years agoDisable SoC sound driver in porter board 73/7673/1
Naoto Yamaguchi [Fri, 16 Dec 2016 16:08:54 +0000 (01:08 +0900)]
Disable SoC sound driver in porter board

The Porter board currently has a problem that pulseaudio can not be used due to the sound driver.
I enabled USB Audio as a workaround, but we had to manually change the default sound device.
As a further workaround, disable the SoC sound driver on the Porter board.

Change-Id: Ie53b75ea0bc252b82910e518da62d2748147fc90
Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
7 years agobbappend to add Intel extra drivers 43/7643/2
Dominig ar Foll (Intel Open Source) [Thu, 15 Dec 2016 07:52:13 +0000 (08:52 +0100)]
bbappend to add Intel extra drivers

Change-Id: I11b245aea28b76f17cba3cdc8c964129bbaf906b
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agoEnable USB Audio in porter board 55/7655/2
Naoto Yamaguchi [Fri, 16 Dec 2016 01:57:35 +0000 (10:57 +0900)]
Enable USB Audio in porter board

This patch is to avoid the problem that pulseaudio can not be used in the Porter board.
This patch does the following two correspondences.
1. Enable USB Audio config
2. Corresponding to problem of self-destruction by outputting a lot of printk

Change-Id: I58682c0755e04e87ec198dd0494d6f9380ebe4ce
Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
7 years agoDisabling LVDS-1 output 37/7637/1
Tadao Tanikawa [Thu, 15 Dec 2016 06:33:37 +0000 (15:33 +0900)]
Disabling LVDS-1 output

If HDMI and LVDS were both enabled, parameters about screens
become inconsistent on weston. As a workaround until root cause
is fixed, disabling LVDS from weston.ini.

Change-Id: I150c0ba5e9655974f7dc365c2168fe7e2d7d93ab
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
7 years agoweston-raspberrypi.ini: Add commented out mode for GeChic 1502i 19/7619/2
Scott Murray [Wed, 14 Dec 2016 21:11:01 +0000 (16:11 -0500)]
weston-raspberrypi.ini: Add commented out mode for GeChic 1502i

Add the commented out mode line for using the GeChic 1502i in 1080p so
that it's easy to enable it for the CES demo setup.

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730

7 years agoAdd patch : ivi input support touch and pointer on subsurface 03/7603/2
Naoto Yamaguchi [Wed, 14 Dec 2016 14:53:52 +0000 (23:53 +0900)]
Add patch : ivi input support touch and pointer on subsurface

This patch is required to use SubSurface in the AGL Distro application.
This patch is necessary for at least navigation application.

Change-Id: I6faaafed3db52f048bc329050de290cba67a546b
Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
7 years agonew default weston.ini for Intel 85/7585/1
Dominig ar Foll (Intel Open Source) [Wed, 14 Dec 2016 08:16:22 +0000 (09:16 +0100)]
new default weston.ini for Intel

Change-Id: Id899777abafd84bc2c7eb9d3ba0a22906a45c7cb
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agoRotating the splash screen 90 degrees 65/7565/2
Tasuku Suzuki [Tue, 13 Dec 2016 06:07:30 +0000 (15:07 +0900)]
Rotating the splash screen 90 degrees

AGL demo UI uses screen virtically. This splash screen could be the same
orientation.

Change-Id: I62333f009dca94da79c8257ee7da3069dd86bc2e
Signed-off-by: Tasuku Suzuki <tasuku.suzuki@qt.io>
7 years agobluez: Upgrade for using BLE features 45/7545/2
Stephane Desneux [Mon, 5 Dec 2016 14:00:00 +0000 (15:00 +0100)]
bluez: Upgrade for using BLE features

This version of bluez, a little forward of 5.43,s
includes working features for using BLE GATT services
and attributes.

This is needed for a demo that uses DIGIPASS SecureClick
of Vasco.

To be removed when yocto upgrades to bluez 5.44 or higher.

Signed-off-by: José Bollo <jose.bollo@iot.bzh>
7 years agocorrecting bbappend localisation for Intel USB wifi support 39/7539/1
Dominig ar Foll (Intel Open Source) [Mon, 12 Dec 2016 15:58:48 +0000 (16:58 +0100)]
correcting bbappend localisation for Intel USB wifi support

Change-Id: Ic60a3d8271a14729032f0757df8aa2f8108b7798
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agoAdding more drivers as modules for USB devices on Intel 11/7511/1
Dominig ar Foll [Fri, 9 Dec 2016 09:46:50 +0000 (10:46 +0100)]
Adding more drivers as modules for USB devices on Intel

Change-Id: Ie854777d28f455082bafdee07f36ab21c025dc68
Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
7 years agoEnabling HW acceleration for Intel with libva and correct libva incorrect runtime... 47/7447/2
Dominig ar Foll (Intel Open Source) [Tue, 6 Dec 2016 22:16:04 +0000 (23:16 +0100)]
Enabling HW acceleration for Intel with libva and correct libva incorrect runtime dependency with x11

Change-Id: I175b0d9900d61546cb0f116a1d698ee1f60b84b7
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
Correct libva incorrect runtime dependency with x11

Change-Id: Ic4231c217c8c63575a98d370c898b8cb04e3a980
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agoadd namespace to config kernel 41/7441/3
Ronan [Tue, 6 Dec 2016 12:41:15 +0000 (13:41 +0100)]
add namespace to config kernel

 * missing namespace into defconf

Change-Id: I9f292f8186fb771f8eb8c82ad8e7e985c474e9ea
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agofix agl-image-weston build 43/7443/1
Ronan [Tue, 6 Dec 2016 14:07:13 +0000 (15:07 +0100)]
fix agl-image-weston build

 * weston-init provides weston.service as weston.
   We only want one recipe which provides weston.service

Change-Id: I2b9db570d466cd8f4007e2c28e0231f77d0a36ca
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoMerge meta-agl-security into meta-agl 31/7431/2
Stephane Desneux [Mon, 5 Dec 2016 09:11:26 +0000 (10:11 +0100)]
Merge meta-agl-security into meta-agl

meta-agl-security only contains one recipe for xmlsec so it's not necessary
to maintain a full layer for this

Change-Id: I66b3eeaa0e777fcc0c94bdf562b7188b01641d86
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
7 years agoadd h3ulcb support 27/7427/1
Ronan [Mon, 5 Dec 2016 08:45:50 +0000 (09:45 +0100)]
add h3ulcb support

Change-Id: I9c00765c3c1eece18a80c7b9f16a79a2bb9d2e5a
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoFix: CVE-2016-1238 recent perl doesn't include cwd 11/7411/4
Romain Forlot [Fri, 2 Dec 2016 16:13:31 +0000 (16:13 +0000)]
Fix: CVE-2016-1238 recent perl doesn't include cwd

Upstream YP introduced
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?h=krogoth&id=529bbe2cc2cebeec0ee6cef27aba2d1aafe79d38

Thus this adds a follow-up fix for openssl.

Change-Id: Ifb55c3022596a6105662618f4cd08bd0165f5a6b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
7 years agooptee-os depend on python-pycrypto 89/7389/2
Ronan [Fri, 2 Dec 2016 09:22:14 +0000 (10:22 +0100)]
optee-os depend on python-pycrypto

 * optee-os use python script to build so,
   We need to add:
     inherit pythonnative
   If not we use host python during the build.
 * During the build, optee-os use script:
    - scripts/pem_to_pub_c.py
    - scripts/sign.py
   Those script depend on python-pycrypto
     "from Crypto.PublicKey import RSA"
   So we need to add python-pycrypto native to recipes
 * The python-pycrypto recipes come from meta-security (out of AGL):
   https://layers.openembedded.org/layerindex/recipe/39101/

Change-Id: I64340544c9a23a8e9ef62aca348fc08722d3dcc2
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
7 years agoRevert "Enabling HW acceleration with libvaapi on Intel by default" 93/7393/2
Jan-Simon Moeller [Fri, 2 Dec 2016 12:31:52 +0000 (12:31 +0000)]
Revert "Enabling HW acceleration with libvaapi on Intel by default"

Due to:
Can't install libva-dev-1.7.0-r0@corei7_64: Can't install libva-egl1-1.7.0-r0@corei7_64: no package provides libva-x11

See
https://jenkins-new.automotivelinux.org/job/sandbox-snapshot-master/MACHINE=intel-corei7-64,label=agl-test-slave/146/console

We need to fix libva through a bbappend.

This reverts commit c678e2d040c6071f3b6bec593d3c6271504a92e7.

Change-Id: I486aa82484f8b62c65b7ae1a7607f75ade26ce91
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoSet rootfs size based on real size of rootfs image 49/7349/4
Anton Gerasimov [Wed, 30 Nov 2016 14:07:18 +0000 (15:07 +0100)]
Set rootfs size based on real size of rootfs image

ROOTFS_SIZE is recomputed for each image type based on total size of
rootfs directory. If rootfs directory gets smaller between creation of
rootfs image and SD image, it fill result in corrupted SD image.
It should not happen in theory, but it happens occasionally for a reason
I could not identify.

Change-Id: I1c888c179fdcec32c3cacbbce7b2d34ec70bbb17
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
7 years agoAdd wl-shell-emulator.so to weston.ini to porter and QEMU as well. 35/7335/2
Anton Gerasimov [Tue, 29 Nov 2016 10:51:54 +0000 (11:51 +0100)]
Add wl-shell-emulator.so to weston.ini to porter and QEMU as well.

CES2017 demo depends on it.

Change-Id: I9a01d106175fcfaba74195c9c6efe6e8f2bda4a5
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
7 years agoweston-raspberrypi.ini: Fix Weston configurations 31/7331/1
Leon Anavi [Mon, 28 Nov 2016 17:37:35 +0000 (19:37 +0200)]
weston-raspberrypi.ini: Fix Weston configurations

Fix Weston configurations for Raspberry Pi 2/3
and run it in IVI shell. Following these changes
start_ALS2016_ivi-shell.sh works again.

Bug-AGL: SPEC-268

Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
7 years agoEnabling HW acceleration with libvaapi on Intel by default 21/7321/2
Dominig ar Foll (Intel Open Source) [Fri, 25 Nov 2016 17:43:01 +0000 (18:43 +0100)]
Enabling HW acceleration with libvaapi on Intel by default

Change-Id: I4efd1d2b8d4b6a6c82c68b572bcd5c9fa7a15ad1
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
7 years agopackagegroup-ivi-common-core-multimedia: add pulseaudio bluetooth modules 19/7319/2
Stephane Desneux [Fri, 25 Nov 2016 15:59:09 +0000 (16:59 +0100)]
packagegroup-ivi-common-core-multimedia: add pulseaudio bluetooth modules

When bluetooth is set in DISTRO_FEATURES, we need some bluetooth specific modules
for pulseaudio.

The list of packages is a part of OE's package group 'packagegroup-tools-bluetooth' which
also contains extra bluetooth tools we don't want to install in the core AGL image.

Bug-AGL: SPEC-293

Change-Id: I47abe11c136ce6a8fd9d58759bbf9ea1a506fd82
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
7 years agoUse IVI-shell instead of desktop-shell as default in weston.ini 07/7307/4
Bocklage, Jens [Thu, 24 Nov 2016 13:54:59 +0000 (14:54 +0100)]
Use IVI-shell instead of desktop-shell as default in weston.ini

Using IVI-shell as default for following platforms:
 - QEMU
 - Renesas
 - Raspberry Pi

The IVI-shell is needed to run the CES 2017 demo.

Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
7 years agoConvert feature.inc to feature.dep 99/7299/1
Jan-Simon Möller [Thu, 24 Nov 2016 17:43:06 +0000 (18:43 +0100)]
Convert feature.inc to feature.dep

This converts the included features used for CI purposes to use the
dependency format introduced.

Change-Id: I405af9ffbd6954d0e78b5f738e762a80687337d7
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoFix file extension from *.bb to *.bbappend 93/7293/2
Kotaro Hashimoto [Thu, 24 Nov 2016 06:54:10 +0000 (15:54 +0900)]
Fix file extension from *.bb to *.bbappend

linux-linaro-qcomlt%.bb was wrong file extension.
I modify this file extension from *.bb to *.bbappend.

Change-Id: Ib44d0496025d88faf7a34310cc3d208db668ca5a
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
7 years agoconf-notes.txt: Add image agl-demo-platform-html5 89/7289/2
Leon Anavi [Wed, 23 Nov 2016 14:45:12 +0000 (16:45 +0200)]
conf-notes.txt: Add image agl-demo-platform-html5

Add agl-demo-platform-html5 to the list of AGL
images.

Bug-AGL: SPEC-331

Change-Id: I70f79bfa0b95e8e95f2a4023f91b185814123104
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
7 years agometa-rcar-gen3: autoload mmp modules 87/7287/1
Yannick Gicquel [Wed, 23 Nov 2016 08:36:26 +0000 (09:36 +0100)]
meta-rcar-gen3: autoload mmp modules

Add KERNEL_MODULES_AUTOLOAD directive some to multimedia package drivers.
Thus after bootup, multimedia framework is ready to use hw acceleration IP.

Change-Id: I43a92fdf2dff1f546e5a532b13203efd4a6b829c
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agodra7xx-evm: weston: add changes for AGL home screen 41/7241/2
Karthik Ramanan [Fri, 18 Nov 2016 07:47:53 +0000 (13:17 +0530)]
dra7xx-evm: weston: add changes for AGL home screen

This patch set contains three sets of changes:
 * Recipes and patches from meta-arago for weston bringup
 * Additional patches to support ivi-shell for dra7xx-evm
 * Configuration settings for applications/AGL home screen

Change-Id: I925c1babdf2e825c0f68ec1d57107469f3abef09
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agometa-agl-bsp: More CES 2017 demo hardware support for TI Vayu 71/7271/2
Scott Murray [Mon, 21 Nov 2016 17:30:27 +0000 (19:30 +0200)]
meta-agl-bsp: More CES 2017 demo hardware support for TI Vayu

Tweaked the rtl_sdr.cfg fragment for linux-ti-staging to add CONFIG_I2C_MUX,
as it is required by the RTL28xx driver Kconfig in newer kernels.  As well,
added another fragment to linux-ti-staging to enable USB Bluetooth HCI
devices so that USB Bluetooth adapters will work on Vayu.

Change-Id: Ifd40f25e2159066fea4707a7915ba9b6dee52e0c
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
7 years agometa-rcar-gen3: add template with hw acceleration 67/7267/1
Yannick Gicquel [Mon, 21 Nov 2016 13:12:21 +0000 (14:12 +0100)]
meta-rcar-gen3: add template with hw acceleration

this introduce gen3 support with egl & multimedia acceleration.

Change-Id: Id816c6ae85e2877a1af9203ef893e1db12db5afc
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agodra7xx-evm: u-boot: Fix SRCREV + mmc stability fix 43/7243/2
Karthik Ramanan [Fri, 18 Nov 2016 07:53:25 +0000 (13:23 +0530)]
dra7xx-evm: u-boot: Fix SRCREV + mmc stability fix

The latest u-boot has included some patches that
is causing an instability with certain MMC cards
This patch fixes the SRCREV to a known commit and
includes a stability fix for the MMC

Change-Id: I7ba99d36bd713d81409d528e8067e012415b33f0
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agoREADME-AGL.md: remove the description about v4l2sink. 45/7245/2
Harunobu Kurokawa [Fri, 18 Nov 2016 08:19:11 +0000 (17:19 +0900)]
README-AGL.md: remove the description about v4l2sink.

AGL support only using weston, then AGL cannot support v4l2sink.
README-AGL.md describe about v4l2, so remove it.

Change-Id: I4f670166fb18be0be88ecd32bdda5691a48f4d07
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
7 years agometa-rcar-gen3: optee-os: build fixup 39/7239/1
Yannick Gicquel [Thu, 17 Nov 2016 15:36:09 +0000 (16:36 +0100)]
meta-rcar-gen3: optee-os: build fixup

Change-Id: I47dcf04e05ec61eebff20a171df78584c7de70a1
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agoweston.sh: Set XDG_RUNTIME_DIR to /run/user/0 09/7209/2
Leon Anavi [Wed, 16 Nov 2016 19:51:58 +0000 (21:51 +0200)]
weston.sh: Set XDG_RUNTIME_DIR to /run/user/0

Set XDG_RUNTIME_DIR for Raspberry Pi in weston.sh
to /run/user/0.

Bug-AGL: SPEC-310

Change-Id: I283ee98ae17a54aa3e6a4c8574ab9debe1b21fbb
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
7 years agodra7xx-evm: u-boot: Add custom uenv.txt 33/7233/1
Karthik Ramanan [Thu, 17 Nov 2016 09:10:29 +0000 (14:40 +0530)]
dra7xx-evm: u-boot: Add custom uenv.txt

dra7xx-evm supports multiple LCD panels, to boot the board
successfully, the uenv.txt has to specify the correct dtb
file. This patch adds the default dtb and specifies one of
the LCD panels in it.

NOTE:
It could happen that the panel that you have is a different
panel, in that case you would have to manually edit the same.

Change-Id: I0fdbe0ce48ca0654604a5808de684558308582c5
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agometa-rcar-gen3: gles: support for AGL toolchain 05/7205/2
Yannick Gicquel [Wed, 16 Nov 2016 14:31:01 +0000 (15:31 +0100)]
meta-rcar-gen3: gles: support for AGL toolchain

As TARGET_VENDOR is defined in AGL, the toolchain has a
different name.
The gles recipe contains hardcoded toolchain name, this
add support to custom one.

Change-Id: Ie4e768d0570c6a07f92067e39079e6e063d59451
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agoAdd support for CES 2017 demo hardware 97/7197/4
Scott Murray [Tue, 15 Nov 2016 17:27:02 +0000 (12:27 -0500)]
Add support for CES 2017 demo hardware

Add kernel config fragments to enable support for the TP-Link TL-W722N
USB Wifi adapter on both Turbot and Porter, and RTL2832U DVB USB adapter
on Porter.

v2 (jsmoeller): Adapt linux-yocto bits and add rpi3 + vayu
    - moving linux-yocto appends catches all the linux-yocto boards
    - adding the fragments to the other boards likewise
    - yet todo: sabre, wandboard
v3 (jsmoeller): remove leftover file://

Change-Id: Ic2c3255d9383ccfe8b24d034ef43779d120c5ee1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoAdd feature shortcuts matching ci system 95/7195/2
Jan-Simon Möller [Mon, 14 Nov 2016 08:35:45 +0000 (09:35 +0100)]
Add feature shortcuts matching ci system

These features (shortcuts) do activate the feature set for:
 - the changeset builds (agl-ci-change-features)
 - the snapshot builds (agl-ci-snapshot-features)

Change-Id: I4972f61b070836fedef8e06d32deaf07b8978dfb
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agodra7xx-evm: ti-ipc: get rid of local patches 07/7207/1
Karthik Ramanan [Wed, 16 Nov 2016 15:19:20 +0000 (20:49 +0530)]
dra7xx-evm: ti-ipc: get rid of local patches

The patch that was submitted to meta-agl has been upstreamed.
Remove and reuse from meta-ti.

Change-Id: I269b40fc29913bc192a4d0417b5f6c1af4458d81
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
7 years agoREADME-AGL.md: Update links to AGL wiki 91/7191/2
Leon Anavi [Mon, 14 Nov 2016 15:21:52 +0000 (17:21 +0200)]
README-AGL.md: Update links to AGL wiki

Update links to AGL wiki for the getting started
guidelines for QEMU, Renesas Porter board and
Raspberry Pi 2/3.

Change-Id: I39a557d790951232195b369c1b29550a37495ed4
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
7 years agoAdd newlines at end of fragment 87/7187/2
Jan-Simon Möller [Mon, 14 Nov 2016 08:35:45 +0000 (09:35 +0100)]
Add newlines at end of fragment

These are required for proper parsing.

Change-Id: I8ade2d0f96ad73f954cd4fd9908c47088def4d8a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agotemplates: add R-Car M3 starter kit (w/o gfx) 57/7157/2
Yannick Gicquel [Thu, 10 Nov 2016 15:12:02 +0000 (16:12 +0100)]
templates: add R-Car M3 starter kit (w/o gfx)

Introduce a new template for "m3ulcb" reference design.
This machine is intended to be used in CI process, and does _not_
activate Hw acceleration for graphics or multimedia.

Change-Id: Ia780dee9a4d75133dfe7f98f09d3e876723d05f6
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agometa-agl-bsp: meta-rcar-gen3: initial integration 55/7155/2
Yannick Gicquel [Thu, 10 Nov 2016 15:04:19 +0000 (16:04 +0100)]
meta-agl-bsp: meta-rcar-gen3: initial integration

Note: optee-os recipe is disable for the moment.

Change-Id: I8881fcc3c794b1cbb479b8e7d61bb86688f78bf9
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
7 years agometa-agl-bsp: backport: gstreamer1.0 v1.4.5 recipes 53/7153/3
Yannick Gicquel [Thu, 10 Nov 2016 13:55:11 +0000 (14:55 +0100)]
meta-agl-bsp: backport: gstreamer1.0 v1.4.5 recipes

This is a backport from Jethro as meta-rcar-gen3 append on following:

- gstreamer1.0-libav_1.4.5
- gstreamer1.0-omx_1.2.0
- gstreamer1.0-plugins-bad_1.4.5
- gstreamer1.0-plugins-good_1.4.5

v2 (jsmoeller): Move into meta-rcar-gen3 subfolder as it only affects that layer.

Change-Id: Iefc9a2c10e76c172f1cb1f8d3babf3544828310e
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agometa-agl-bsp: backport: mesa v10.6.3 recipe 51/7151/3
Yannick Gicquel [Thu, 10 Nov 2016 13:40:14 +0000 (14:40 +0100)]
meta-agl-bsp: backport: mesa v10.6.3 recipe

This is a backport from Jethro as meta-rcar-gen3 append on this package.

v2 (jsmoeller): Move underneath meta-rcar-gen3 as it only affects that layer.

Change-Id: I1c9f94346da919530c359b471429fad9b1b2c661
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agometa-agl-bsp: backport: linuxptp v1.4 recipe 49/7149/3
Yannick Gicquel [Thu, 10 Nov 2016 13:38:48 +0000 (14:38 +0100)]
meta-agl-bsp: backport: linuxptp v1.4 recipe

This is a backport from Jethro as meta-rcar-gen3 append on this package.

v2 (jsmoeller): move to meta-rcar-gen3 subfolder as it only affects that layer

Change-Id: Ic5755342beae2b02a6072d40fc7e8d41596d5b2b
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
7 years agoAdd firmware for wifi on rpi3 83/7183/1
Jan-Simon Möller [Sun, 13 Nov 2016 20:16:05 +0000 (21:16 +0100)]
Add firmware for wifi on rpi3

This changeset add the firmware files for the wifi to the image.

Change-Id: I3557a50acc3eb80add605fdbdc32fa4af3a747bb
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>