meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend

   1 DISABLE_OVERSCAN = "1"
   2 TOTAL_BOARD_MEM = "3072"
   3
   4 do_deploy:append:raspberrypi4() {
   5     # ENABLE CAN
   6     if [ "${ENABLE_CAN}" = "1" ]; then
   7         echo "# Enable CAN" >> ${DEPLOYDIR}/bootfiles/config.txt
   8         echo "dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25" >>${DEPLOYDIR}/bootfiles/config.txt
   9     fi
  10
  11     # ENABLE DUAL CANFD
  12     if [ "${ENABLE_DUAL_CAN_FD}" = "1" ]; then
  13         echo "# Enable CANFD" >> ${DEPLOYDIR}/bootfiles/config.txt
  14         echo "dtoverlay=mcp251xfd-can0,oscillator=16000000,interrupt=25" >> ${DEPLOYDIR}/bootfiles/config.txt
  15         echo "dtoverlay=mcp251xfd-can1,oscillator=16000000,interrupt=24" >> ${DEPLOYDIR}/bootfiles/config.txt
  16     fi
  17
  18     # Handle setup with armstub file
  19     if [ -n "${ARMSTUB}" ]; then
  20         echo "\n# ARM stub configuration" >> ${DEPLOYDIR}/bootfiles/config.txt
  21         echo "armstub=${ARMSTUB}" >> ${DEPLOYDIR}/bootfiles/config.txt
  22         case "${ARMSTUB}" in
  23             *-gic.bin)
  24                 echo  "enable_gic=1" >> ${DEPLOYDIR}/bootfiles/config.txt
  25                 ;;
  26         esac
  27     fi
  28
  29     if [ "${AGL_XEN_WANTED}" = "1" ]; then
  30         echo "total_mem=${TOTAL_BOARD_MEM}" >> ${DEPLOYDIR}/bootfiles/config.txt
  31     fi
  32 }
  33
  34 do_deploy:append() {
  35     if [ "${ENABLE_CMA}" = "1" ] && [ -n "${CMA_LWM}" ]; then
  36         sed -i '/#cma_lwm/ c\cma_lwm=${CMA_LWM}' ${DEPLOYDIR}/bootfiles/config.txt
  37     fi
  38
  39     if [ "${ENABLE_CMA}" = "1" ] && [ -n "${CMA_HWM}" ]; then
  40         sed -i '/#cma_hwm/ c\cma_hwm=${CMA_HWM}' ${DEPLOYDIR}/bootfiles/config.txt
  41     fi
  42
  43     echo "avoid_warnings=2" >> ${DEPLOYDIR}/bootfiles/config.txt
  44     echo "mask_gpu_interrupt0=0x400" >> ${DEPLOYDIR}/bootfiles/config.txt
  45     echo "dtoverlay=vc4-kms-v3d-overlay,cma-256" >> ${DEPLOYDIR}/bootfiles/config.txt
  46     echo "dtoverlay=rpi-ft5406-overlay" >> ${DEPLOYDIR}/bootfiles/config.txt
  47     echo "dtparam=audio=on" >> ${DEPLOYDIR}/bootfiles/config.txt
  48 }
  49
  50 do_deploy:append:raspberrypi4() {
  51     echo -e "\n[pi4]" >> ${DEPLOYDIR}/bootfiles/config.txt
  52     echo "max_framebuffers=2" >> ${DEPLOYDIR}/bootfiles/config.txt
  53 }