From d58321651ddaa20dd9876a51031a5de08e654f93 Mon Sep 17 00:00:00 2001 From: wminer Date: Wed, 4 Nov 2015 08:02:17 -0600 Subject: [PATCH] Added weston instructions and fixed some typos. Change-Id: I56f9b68b722bf7abf784991517a2fc34f7b21902 Signed-off-by: wminer --- README.md | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index 4b97f7427..8c4ce30b8 100644 --- a/README.md +++ b/README.md @@ -72,18 +72,18 @@ These packagegroups contains packages for application framework of AGL Distro. Subsystem should maintain ``packagegroup-agl-appfw-[subsystem].bb`` which should hold sufficient packages for application framework of AGL Distro. -Subsystems also can maintain thier own packagegroups under appropriate +Subsystems also can maintain their own packagegroups under appropriate ``recipes-*/``. For example, Qt5 has 2 packagegroups in ``meta-agl-demo``, -``packagegroup-agl-appfw-native-qt5`` and ``pacakgegroup-agl-demo-qt-examples`` +``packagegroup-agl-appfw-native-qt5`` and ``packagegroup-agl-demo-qt-examples`` which are under ``recipes-qt/``. The ``packagegroup-agl-appfw-native-qt5`` is included by -``pacakgegroup-agl-appfw-native`` because Qt5 belongs to native application +``packagegroup-agl-appfw-native`` because Qt5 belongs to native application framework of AGL Distro. -The ``pacakgegroup-agl-demo-qt-examples`` is added to local.conf if needed +The ``packagegroup-agl-demo-qt-examples`` is added to local.conf if needed because they are not mandatory for AGL application framework and AGL Demo Platform. @@ -151,7 +151,15 @@ You can build a QEMU image using the following steps: 2. Build the full image of AGL Demo Platform and applications $ bitbake agl-demo-platform -3. Run the emulator. The path for the emulator (runqemu) was added during the envsetup. +3. The Weston IVI-Shell always gets built ; it will not be started, however, unless you specify the following in your "conf/local.conf" file : + +IMAGE_INSTALL_append = " \ + weston-ivi-shell-config \ + " + +or you manually overwrites the "/etc/xdg/weston/weston.ini" file with a correct one. + +4. Run the emulator. The path for the emulator (runqemu) was added during the envsetup. $ cd tmp/deploy/images/qemex86-64 $ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3 @@ -161,6 +169,7 @@ You can build a QEMU image using the following steps: 5. Some weston samples are available from weston terminal. + Build a R-Car M2 (porter) image ------------------------------- -- 2.16.6