--- /dev/null
+From 5cd43dc7519f54f9786fb6c686a2ce1e682d4366 Mon Sep 17 00:00:00 2001
+From: Philippe Coval <philippe.coval@open.eurogiciel.org>
+Date: Fri, 25 Apr 2014 10:31:42 +0200
+Subject: [PATCH 16/21] xdg-shell: Add xdg-shell protocol file version 1.4.0
+
+Source: http://cgit.freedesktop.org/wayland/weston/plain/protocol/xdg-shell.xml?id=1.4.0
+
+This file will need to be refreshed on protocol update
+until xdg-shell land in wayland's public headers
+
+Task-number: QTBUG-38633/part/1of2
+Change-Id: I397d863dcfc2223ac6eb234c37dbcd7449ecffff
+Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com>
+Origin: https://www.qt.gitorious.org/qt/qtwayland/commit/c2a22eea6716e073875474adf624d8463eba836c
+Bug-Tizen: TIVI-3113/part
+Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
+---
+ src/3rdparty/protocol/xdg-shell.xml | 438 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 438 insertions(+)
+ create mode 100644 src/3rdparty/protocol/xdg-shell.xml
+
+diff --git a/src/3rdparty/protocol/xdg-shell.xml b/src/3rdparty/protocol/xdg-shell.xml
+new file mode 100644
+index 0000000..4e5cff8
+--- /dev/null
++++ b/src/3rdparty/protocol/xdg-shell.xml
+@@ -0,0 +1,438 @@
++<?xml version="1.0" encoding="UTF-8"?>
++<protocol name="xdg_shell">
++
++ <copyright>
++ Copyright © 2008-2013 Kristian Høgsberg
++ Copyright © 2013 Rafael Antognolli
++ Copyright © 2013 Jasper St. Pierre
++ Copyright © 2010-2013 Intel Corporation
++
++ Permission to use, copy, modify, distribute, and sell this
++ software and its documentation for any purpose is hereby granted
++ without fee, provided that the above copyright notice appear in
++ all copies and that both that copyright notice and this permission
++ notice appear in supporting documentation, and that the name of
++ the copyright holders not be used in advertising or publicity
++ pertaining to distribution of the software without specific,
++ written prior permission. The copyright holders make no
++ representations about the suitability of this software for any
++ purpose. It is provided "as is" without express or implied
++ warranty.
++
++ THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
++ SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
++ FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
++ SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
++ AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
++ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
++ THIS SOFTWARE.
++ </copyright>
++
++ <interface name="xdg_shell" version="1">
++ <description summary="create desktop-style surfaces">
++ This interface is implemented by servers that provide
++ desktop-style user interfaces.
++
++ It allows clients to associate a xdg_surface with
++ a basic surface.
++ </description>
++
++ <enum name="version">
++ <description summary="latest protocol version">
++ Use this enum to check the protocol version, and it will be updated
++ automatically.
++ </description>
++ <entry name="current" value="1" summary="Always the latest version"/>
++ </enum>
++
++
++ <request name="use_unstable_version">
++ <description summary="enable use of this unstable version">
++ Use this request in order to enable use of this interface.
++
++ Understand and agree that one is using an unstable interface,
++ that will likely change in the future, breaking the API.
++ </description>
++ <arg name="version" type="int"/>
++ </request>
++
++ <request name="get_xdg_surface">
++ <description summary="create a shell surface from a surface">
++ Create a shell surface for an existing surface.
++
++ Only one shell or popup surface can be associated with a given
++ surface.
++ </description>
++ <arg name="id" type="new_id" interface="xdg_surface"/>
++ <arg name="surface" type="object" interface="wl_surface"/>
++ </request>
++
++ <request name="get_xdg_popup">
++ <description summary="create a shell surface from a surface">
++ Create a popup surface for an existing surface.
++
++ Only one shell or popup surface can be associated with a given
++ surface.
++ </description>
++ <arg name="id" type="new_id" interface="xdg_popup"/>
++ <arg name="surface" type="object" interface="wl_surface"/>
++ <arg name="parent" type="object" interface="wl_surface"/>
++ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
++ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
++ <arg name="x" type="int"/>
++ <arg name="y" type="int"/>
++ <arg name="flags" type="uint"/>
++ </request>
++ </interface>
++
++ <interface name="xdg_surface" version="1">
++
++ <description summary="desktop-style metadata interface">
++ An interface that may be implemented by a wl_surface, for
++ implementations that provide a desktop-style user interface.
++
++ It provides requests to treat surfaces like windows, allowing to set
++ properties like maximized, fullscreen, minimized, and to move and resize
++ them, and associate metadata like title and app id.
++
++ On the server side the object is automatically destroyed when
++ the related wl_surface is destroyed. On client side,
++ xdg_surface.destroy() must be called before destroying
++ the wl_surface object.
++ </description>
++
++ <request name="destroy" type="destructor">
++ <description summary="remove xdg_surface interface">
++ The xdg_surface interface is removed from the wl_surface object
++ that was turned into a xdg_surface with
++ xdg_shell.get_xdg_surface request. The xdg_surface properties,
++ like maximized and fullscreen, are lost. The wl_surface loses
++ its role as a xdg_surface. The wl_surface is unmapped.
++ </description>
++ </request>
++
++ <request name="set_transient_for">
++ <description summary="surface is a child of another surface">
++ Setting a surface as transient of another means that it is child
++ of another surface.
++
++ Child surfaces are stacked above their parents, and will be
++ unmapped if the parent is unmapped too. They should not appear
++ on task bars and alt+tab.
++ </description>
++ <arg name="parent" type="object" interface="wl_surface" allow-null="true"/>
++ </request>
++
++ <request name="set_title">
++ <description summary="set surface title">
++ Set a short title for the surface.
++
++ This string may be used to identify the surface in a task bar,
++ window list, or other user interface elements provided by the
++ compositor.
++
++ The string must be encoded in UTF-8.
++ </description>
++ <arg name="title" type="string"/>
++ </request>
++
++ <request name="set_app_id">
++ <description summary="set surface class">
++ Set an id for the surface.
++
++ The app id identifies the general class of applications to which
++ the surface belongs.
++
++ It should be the ID that appears in the new desktop entry
++ specification, the interface name.
++ </description>
++ <arg name="app_id" type="string"/>
++ </request>
++
++ <request name="pong">
++ <description summary="respond to a ping event">
++ A client must respond to a ping event with a pong request or
++ the client may be deemed unresponsive.
++ </description>
++ <arg name="serial" type="uint" summary="serial of the ping event"/>
++ </request>
++
++ <event name="ping">
++ <description summary="ping client">
++ Ping a client to check if it is receiving events and sending
++ requests. A client is expected to reply with a pong request.
++ </description>
++ <arg name="serial" type="uint"/>
++ </event>
++
++ <request name="move">
++ <description summary="start an interactive move">
++ Start a pointer-driven move of the surface.
++
++ This request must be used in response to a button press event.
++ The server may ignore move requests depending on the state of
++ the surface (e.g. fullscreen or maximized).
++ </description>
++ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
++ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
++ </request>
++
++ <enum name="resize_edge">
++ <description summary="edge values for resizing">
++ These values are used to indicate which edge of a surface
++ is being dragged in a resize operation. The server may
++ use this information to adapt its behavior, e.g. choose
++ an appropriate cursor image.
++ </description>
++ <entry name="none" value="0"/>
++ <entry name="top" value="1"/>
++ <entry name="bottom" value="2"/>
++ <entry name="left" value="4"/>
++ <entry name="top_left" value="5"/>
++ <entry name="bottom_left" value="6"/>
++ <entry name="right" value="8"/>
++ <entry name="top_right" value="9"/>
++ <entry name="bottom_right" value="10"/>
++ </enum>
++
++ <request name="resize">
++ <description summary="start an interactive resize">
++ Start a pointer-driven resizing of the surface.
++
++ This request must be used in response to a button press event.
++ The server may ignore resize requests depending on the state of
++ the surface (e.g. fullscreen or maximized).
++ </description>
++ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
++ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
++ <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
++ </request>
++
++ <event name="configure">
++ <description summary="suggest resize">
++ The configure event asks the client to resize its surface.
++
++ The size is a hint, in the sense that the client is free to
++ ignore it if it doesn't resize, pick a smaller size (to
++ satisfy aspect ratio or resize in steps of NxM pixels).
++
++ The edges parameter provides a hint about how the surface
++ was resized. The client may use this information to decide
++ how to adjust its content to the new size (e.g. a scrolling
++ area might adjust its content position to leave the viewable
++ content unmoved). Valid edge values are from resize_edge enum.
++
++ The client is free to dismiss all but the last configure
++ event it received.
++
++ The width and height arguments specify the size of the window
++ in surface local coordinates.
++ </description>
++
++ <arg name="edges" type="uint"/>
++ <arg name="width" type="int"/>
++ <arg name="height" type="int"/>
++ </event>
++
++ <request name="set_output">
++ <description summary="set the default output used by this surface">
++ Set the default output used by this surface when it is first mapped.
++
++ If this value is NULL (default), it's up to the compositor to choose
++ which display will be used to map this surface.
++
++ When fullscreen or maximized state are set on this surface, and it
++ wasn't mapped yet, the output set with this method will be used.
++ Otherwise, the output where the surface is currently mapped will be
++ used.
++ </description>
++ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
++ </request>
++
++ <event name="request_set_fullscreen">
++ <description summary="server requests that the client set fullscreen">
++ Event sent from the compositor to the client requesting that the client
++ goes to a fullscreen state. It's the client job to call set_fullscreen
++ and really trigger the fullscreen state.
++ </description>
++ </event>
++
++ <event name="request_unset_fullscreen">
++ <description summary="server requests that the client unset fullscreen">
++ Event sent from the compositor to the client requesting that the client
++ leaves the fullscreen state. It's the client job to call
++ unset_fullscreen and really leave the fullscreen state.
++ </description>
++ </event>
++
++ <request name="set_fullscreen">
++ <description summary="set the surface state as fullscreen">
++ Set the surface as fullscreen.
++
++ After this request, the compositor should send a configure event
++ informing the output size.
++
++ This request informs the compositor that the next attached buffer
++ committed will be in a fullscreen state. The buffer size should be the
++ same size as the size informed in the configure event, if the client
++ doesn't want to leave any empty area.
++
++ In other words: the next attached buffer after set_maximized is the new
++ maximized buffer. And the surface will be positioned at the maximized
++ position on commit.
++
++ A simple way to synchronize and wait for the correct configure event is
++ to use a wl_display.sync request right after the set_fullscreen
++ request. When the sync callback returns, the last configure event
++ received just before it will be the correct one, and should contain the
++ right size for the surface to maximize.
++
++ Setting one state won't unset another state. Use
++ xdg_surface.unset_fullscreen for unsetting it.
++ </description>
++ </request>
++
++ <request name="unset_fullscreen">
++ <description summary="unset the surface state as fullscreen">
++ Unset the surface fullscreen state.
++
++ Same negotiation as set_fullscreen must be used.
++ </description>
++ </request>
++
++ <event name="request_set_maximized">
++ <description summary="server requests that the client set maximized">
++ Event sent from the compositor to the client requesting that the client
++ goes to a maximized state. It's the client job to call set_maximized
++ and really trigger the maximized state.
++ </description>
++ </event>
++
++ <event name="request_unset_maximized">
++ <description summary="server requests that the client unset maximized">
++ Event sent from the compositor to the client requesting that the client
++ leaves the maximized state. It's the client job to call unset_maximized
++ and really leave the maximized state.
++ </description>
++ </event>
++
++ <request name="set_maximized">
++ <description summary="set the surface state as maximized">
++ Set the surface as maximized.
++
++ After this request, the compositor will send a configure event
++ informing the output size minus panel and other MW decorations.
++
++ This request informs the compositor that the next attached buffer
++ committed will be in a maximized state. The buffer size should be the
++ same size as the size informed in the configure event, if the client
++ doesn't want to leave any empty area.
++
++ In other words: the next attached buffer after set_maximized is the new
++ maximized buffer. And the surface will be positioned at the maximized
++ position on commit.
++
++ A simple way to synchronize and wait for the correct configure event is
++ to use a wl_display.sync request right after the set_maximized request.
++ When the sync callback returns, the last configure event received just
++ before it will be the correct one, and should contain the right size
++ for the surface to maximize.
++
++ Setting one state won't unset another state. Use
++ xdg_surface.unset_maximized for unsetting it.
++ </description>
++ </request>
++
++ <request name="unset_maximized">
++ <description summary="unset the surface state as maximized">
++ Unset the surface maximized state.
++
++ Same negotiation as set_maximized must be used.
++ </description>
++ </request>
++
++ <request name="set_minimized">
++ <description summary="set the surface state as minimized">
++ Set the surface minimized state.
++
++ Setting one state won't unset another state.
++ </description>
++ </request>
++
++ <event name="focused_set">
++ <description summary="surface was focused">
++ The focused_set event is sent when this surface has been
++ activated. Window decorations should be updated accordingly.
++ </description>
++ </event>
++
++ <event name="focused_unset">
++ <description summary="surface was unfocused">
++ The focused_unset event is sent when this surface has been
++ deactivated, because another surface has been activated. Window
++ decorations should be updated accordingly.
++ </description>
++ </event>
++ </interface>
++
++ <interface name="xdg_popup" version="1">
++ <description summary="desktop-style metadata interface">
++ An interface that may be implemented by a wl_surface, for
++ implementations that provide a desktop-style popups/menus. A popup
++ surface is a transient surface with an added pointer grab.
++
++ An existing implicit grab will be changed to owner-events mode,
++ and the popup grab will continue after the implicit grab ends
++ (i.e. releasing the mouse button does not cause the popup to be
++ unmapped).
++
++ The popup grab continues until the window is destroyed or a mouse
++ button is pressed in any other clients window. A click in any of
++ the clients surfaces is reported as normal, however, clicks in
++ other clients surfaces will be discarded and trigger the callback.
++
++ The x and y arguments specify the locations of the upper left
++ corner of the surface relative to the upper left corner of the
++ parent surface, in surface local coordinates.
++
++ xdg_popup surfaces are always transient for another surface.
++ </description>
++
++ <request name="destroy" type="destructor">
++ <description summary="remove xdg_surface interface">
++ The xdg_surface interface is removed from the wl_surface object
++ that was turned into a xdg_surface with
++ xdg_shell.get_xdg_surface request. The xdg_surface properties,
++ like maximized and fullscreen, are lost. The wl_surface loses
++ its role as a xdg_surface. The wl_surface is unmapped.
++ </description>
++ </request>
++
++ <request name="pong">
++ <description summary="respond to a ping event">
++ A client must respond to a ping event with a pong request or
++ the client may be deemed unresponsive.
++ </description>
++ <arg name="serial" type="uint" summary="serial of the ping event"/>
++ </request>
++
++ <event name="ping">
++ <description summary="ping client">
++ Ping a client to check if it is receiving events and sending
++ requests. A client is expected to reply with a pong request.
++ </description>
++ <arg name="serial" type="uint"/>
++ </event>
++
++ <event name="popup_done">
++ <description summary="popup interaction is done">
++ The popup_done event is sent out when a popup grab is broken,
++ that is, when the users clicks a surface that doesn't belong
++ to the client owning the popup surface.
++ </description>
++ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
++ </event>
++
++ </interface>
++</protocol>
+--
+1.9.1
+
Code Review / AGL / meta-agl-demo.git / blobdiff