Install a full unzip for images with agl-devel

[AGL/meta-agl-demo.git] / recipes-platform / packagegroups / packagegroup-agl-demo-platform.bb

diff --git a/recipes-platform/packagegroups/packagegroup-agl-demo-platform.bb b/recipes-platform/packagegroups/packagegroup-agl-demo-platform.bb
old mode 100755 (executable)
new mode 100644 (file)
index e6359f4..9443932
--- a/recipes-platform/packagegroups/packagegroup-agl-demo-platform.bb
+++ b/recipes-platform/packagegroups/packagegroup-agl-demo-platform.bb
@@ -16,52 +16,88 @@ RDEPENDS_${PN} += "\
     "
 
 RDEPENDS_${PN} += "\
+    packagegroup-agl-profile-graphical-qt5 \
     packagegroup-agl-demo \
     "
 
-MOST_DRIVERS = " "
-MOST_DRIVERS_append = " \
-    mocca-usb \
+# MOST out-of-tree kernel drivers
+#################################
+MOST_DRIVERS ??= " \
     most \
     "
-# Don't add MOST support when building for Porter
-MOST_DRIVERS_remove_porter = "most"
+# These boards use different kernels - needs to be checked
+MOST_DRIVERS_dra7xx-evm ?= ""
+MOST_DRIVERS_dragonboard-410c ?= ""
 
-# HVAC dependencies depend on drivers above
-MOST_HVAC = " "
-MOST_HVAC_append = " \
-    ${MOST_DRIVERS} \
-    "
 
-# can-lin is a binary and only for porter :(
-MOST_HVAC_append_porter = " \
-    can-lin \
+# HVAC dependencies
+###################
+LIN_DRIVERS ??= " sllin"
+# These boards use different kernels - needs to be checked
+LIN_DRIVERS_dra7xx-evm ?= ""
+LIN_DRIVERS_dragonboard-410c ?= ""
+
+# UNICENS service
+UNICENS ?= " \
+    unicens-config \
+    agl-service-unicens \
+    agl-service-unicens-controller \
     "
 
-# mapviewer and mapviewer-demo requires AGL CES2017 demo mock-up
-MAPVIEWER = "${@bb.utils.contains("DISTRO_FEATURES", "agl-mapviewer-demo", " mapviewer mapviewer-demo", "",d)}"
 
 AGL_APPS = " \
     dashboard \
     hvac \
     mediaplayer \
-    mixer \
-    navigation \
+    virtual/navigation \
     phone \
     poiapp \
     radio \
     settings \
+    messaging \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'agl-devel', 'taskmanager' , '', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'agl-devel', 'unzip' , '', d)} \
     high-level-viwi-service \
+    agl-service-signal-composer \
     low-can-demo \
+    virtual/mixer \
     "
 
+AGL_APIS = " \
+    libnaviapi-agl \
+    "
+
+QTAGLEXTRAS = "${@bb.utils.contains("DISTRO_FEATURES", "agl-hmi-framework", " qtaglextras", "",d)}"
+
+# Cluster demo support.
+# ATM no cluster map viewer is supported with the older navigation application.
+MAPVIEWER = "${@bb.utils.contains("PREFERRED_RPROVIDER_virtual/navigation", "ondemandnavi", "tbtnavi", "",d)}"
+CLUSTER_SUPPORT = "${@bb.utils.contains("DISTRO_FEATURES", "agl-cluster-demo-support", "${MAPVIEWER} cluster-demo-network-config", "",d)}"
+
+# Preload poi API key for demo if requested, and potentially maps for older
+# navigation application if it is configured.
+DEMO_MAPS_LOCALE ?= "uk"
+DEMO_PRELOAD_MAPS = "${@bb.utils.contains("PREFERRED_RPROVIDER_virtual/navigation", "navigation", " navigation-maps-${DEMO_MAPS_LOCALE}", "",d)}"
+DEMO_PRELOAD = "${@bb.utils.contains("DISTRO_FEATURES", "agl-demo-preload", " ${DEMO_PRELOAD_MAPS} poiapp-api-key", "",d)}"
+
+# Hook for demo platform configuration
+# ATM, only used to disable btwilink module on M3ULCB + Kingfisher by default,
+# setting DEMO_ENABLE_BTWILINK to "true" in local.conf / site.conf re-enables.
+DEMO_ENABLE_BTWILINK ?= ""
+DEMO_PLATFORM_CONF = ""
+DEMO_PLATFORM_CONF_append_m3ulcb = "${@bb.utils.contains("DEMO_ENABLE_BTWILINK", "true", "", " btwilink-disable-conf", d)}"
+
 RDEPENDS_${PN}_append = " \
     qtquickcontrols2-agl \
     qtquickcontrols2-agl-style \
     linux-firmware-ralink \
-    ${MAPVIEWER} \
-    ${MOST_HVAC} \
+    ${UNICENS} \
+    ${MOST_DRIVERS} \
+    ${LIN_DRIVERS} \
     ${AGL_APPS} \
+    ${AGL_APIS} \
+    ${QTAGLEXTRAS} \
+    ${CLUSTER_SUPPORT} \
+    ${DEMO_PRELOAD} \
+    ${DEMO_PLATFORM_CONF} \
     "
-
-