From c6c3f9ab58281e60c554c66601d1ee3e2102a5c5 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Jan-Simon=20M=C3=B6ller?= Date: Wed, 14 Jul 2021 19:03:02 +0200 Subject: [PATCH] Update image file for H3ULCB on lamprey MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Change the filename and also add note wrt un-accelerated gfx vs. local build w/ proprietary drivers. Bug-AGL: SPEC-4006 Signed-off-by: Jan-Simon Möller Change-Id: I3da37c3aee9a06aa3cd708f1404ff45334153c09 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/documentation/+/26502 --- docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md index 436d62f..9d2f064 100644 --- a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md +++ b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md @@ -360,19 +360,19 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 3. R-Car H3SK (H3ULCB board) -**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required. +**NOTE :** The prebuilt image does support graphics only in **non-accelerated** mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required. 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). - 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz). + 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). 3. Extract the image into the boot device : ```sh $ lsblk $ sudo umount - $ xzcat agl-image-ivi-crosssdk-h3ulcb.wic.xz | sudo dd of= bs=4M + $ xzcat agl-demo-platform-crosssdk-h3ulcb.wic.xz | sudo dd of= bs=4M $ sync ``` -- 2.16.6