From: Martin Kelly <mkelly@xevo.com>
Date: Wed, 15 Feb 2017 22:46:38 +0000 (-0800)
Subject: README-AGL: correct rootfstype to ext4
X-Git-Tag: 3.99.1~164
X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=commitdiff_plain;h=refs%2Fchanges%2F85%2F8485%2F3;p=AGL%2Fmeta-agl.git

README-AGL: correct rootfstype to ext4

README-AGL incorrectly recommends to use rootfstype=ext3, but the
current filesystem is ext4, which causes boot failures due to
unsupported filesystem features. Without this patch, you get the
following when attempting to boot on porter with rootfstype=ext3:

EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported
optional features (240)

Change-Id: I346b76b59420f1ffb7acea58d82961acdf24aaf1
Signed-off-by: Martin Kelly <mkelly@xevo.com>
---

diff --git a/README-AGL.md b/README-AGL.md
index efdd14db2..bb6e8aa63 100644
--- a/README-AGL.md
+++ b/README-AGL.md
@@ -340,7 +340,7 @@ NOTE: To boot weston on porter board, we need keyboard and mouse. (USB2.0 can be
 >     => setenv bootargs_console console=ttySC6,${baudrate}
 >     => setenv bootargs_video vmalloc=384M video=HDMI-A-1:1024x768-32@60
 >     => setenv bootcmd_sd 'ext4load mmc 0:1 0x40007fc0 boot/uImage;ext4load mmc 0:1 0x40f00000 boot/uImage-r8a7791-porter.dtb'
->     => setenv bootcmd 'setenv bootargs ${bootargs_console} ${bootargs_video} root=/dev/mmcblk0p1 rw rootfstype=ext3;run bootcmd_sd;bootm 0x40007fc0 - 0x40f00000'
+>     => setenv bootcmd 'setenv bootargs ${bootargs_console} ${bootargs_video} root=/dev/mmcblk0p1 rw rootfstype=ext4;run bootcmd_sd;bootm 0x40007fc0 - 0x40f00000'
 >     => saveenv
 
 ##### Boot from SD card