From: Kevin Hilman <khilman@baylibre.com>
Date: Tue, 27 Nov 2018 00:02:24 +0000 (-0800)
Subject: ptest wrapper: use new LAVA mode
X-Git-Tag: 6.99.2~2
X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=commitdiff_plain;h=435237023d1368d7d73085006f021f9307fde520;p=src%2Fqa-testdefinitions.git

ptest wrapper: use new LAVA mode

ptest-runner now has a new LAVA mode (enabled with -L) that will
automatically output the LAVA_SIGNAL messages needed for LAVA to
automatically parse/collect test results.

Re-work this wrapper script to that it just uses the new LAVA mode.

Change-Id: I310f1188f65de5f86e8179c12aedce6a92932e9a
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---

diff --git a/common/scripts/ptest-lava-wrapper-all.sh b/common/scripts/ptest-lava-wrapper-all.sh
index 2d3bbdb..2aa3301 100755
--- a/common/scripts/ptest-lava-wrapper-all.sh
+++ b/common/scripts/ptest-lava-wrapper-all.sh
@@ -5,33 +5,9 @@ command -v ptest-runner >/dev/null 2>&1
 if [ $? -ne 0 ] ; then
     lava-test-case ptest-installed --result SKIP
 else
-    # Run ptests for specified packages
-        lava-test-set start ptest-full
-
-        UNIT_LOG=$(ptest-runner 2> results.log )
-        if [ $? -eq 0 ] ; then
-            # grep: Get only the ptests results, no log
-            # sed 1: replace spaces by hyphens
-            # sed 2: remove any special character
-            # sed 3: find status and test name, wrap it in a lava-test-case call
-            # sh: execute the lava-test-case commands
-            test_pass=$(echo "$UNIT_LOG" | grep -e 'PASS' | wc -l)
-            test_fail=$(echo "$UNIT_LOG" | grep -e 'FAIL' | wc -l)
-            lava-test-case passed-commands --result PASS --measurement $test_pass --units pass
-            if ! [ x"0" = x"$test_fail" ] ; then
-              lava-test-case failed-commands --result FAIL --measurement $test_fail --units fail
-              echo "$UNIT_LOG" | grep -e 'FAIL'
-            fi
-        else
-            lava-test-case ptest-runner ptest-full --result fail
-        fi
-
-        lava-test-set stop ptest-full
-
+    ptest-runner -L
     lava-test-case ptest-runtime --measurement $SECONDS --units seconds --result PASS
 fi
 
 # Wait for LAVA to parse all the tests from stdout
 sleep 15
-
-cat results.log
diff --git a/common/scripts/ptest-lava-wrapper.sh b/common/scripts/ptest-lava-wrapper.sh
index 21635ce..8e6e879 100755
--- a/common/scripts/ptest-lava-wrapper.sh
+++ b/common/scripts/ptest-lava-wrapper.sh
@@ -12,26 +12,9 @@ if [ $? -ne 0 ] ; then
 else
     # Run ptests for specified packages
     for unit in ${REQUIREDPTESTS}; do
-        lava-test-set start ptest-$unit
-        UNIT_LOG=$(ptest-runner ${unit} 2> /dev/null)
-        if [ $? -eq 0 ] ; then
-            # grep: Get only the ptests results, no log
-            # sed 1: replace spaces by hyphens
-            # sed 2: remove any special character
-            # sed 3: find status and test name, wrap it in a lava-test-case call
-            # sh: execute the lava-test-case commands
-            test_pass=$(echo "$UNIT_LOG" | grep -e 'PASS' | wc -l)
-            test_fail=$(echo "$UNIT_LOG" | grep -e 'FAIL' | wc -l)
-            lava-test-case ${unit}-passed-commands --result PASS --measurement $test_pass --units pass
-            if ! [ x"0" = x"$test_fail" ] ; then
-              lava-test-case ${unit}-failed-commands --result FAIL --measurement $test_fail --units fail
-              echo "$UNIT_LOG" | grep -e 'FAIL'
-            fi
-            lava-test-set stop ptest-$unit
-        else
-            lava-test-case ptest-runner-${unit} --result fail
-        fi
+	ptest-runner -L ${unit}
     done
+
     lava-test-case ptest-runtime --measurement $SECONDS --units seconds --result PASS
 fi