-# Build updatable image. Only takes effect when sota.bbclass is inherited
-#DISTRO_FEATURES:append = " sota"
-
# Root device
ROOT_VM = "root=PARTUUID=${DISK_SIGNATURE}-02"
-# Build updatable image. Only takes effect when sota.bbclass is inherited
-#DISTRO_FEATURES:append = " sota"
-
# Root device
ROOT_VM = "root=PARTUUID=${DISK_SIGNATURE}-02"
QB_AUDIO_DRV:qemuarm64 := "alsa"
QB_MACHINE:qemuarm64 := "-machine virt -smp 4"
QB_OPT_APPEND:qemuarm64 := " -device VGA,vgamem_mb=64,edid=on -device qemu-xhci -device usb-tablet -device usb-kbd"
-QB_KERNEL_CMDLINE_APPEND:qemuarm64 := "console=ttyAMA0,115200n8 verbose"
\ No newline at end of file
+QB_KERNEL_CMDLINE_APPEND:qemuarm64 := "console=ttyAMA0,115200n8 verbose"
-# Build updatable image. Only takes effect when sota.bbclass is inherited
-DISTRO_FEATURES:append = " sota"
-
# Root device
ROOT_VM = "root=PARTUUID=${DISK_SIGNATURE}-02"
# All boot message will be off
QB_KERNEL_CMDLINE_APPEND:append = " quiet"
-# Build updatable image. Only takes effect when sota.bbclass is inherited
-DISTRO_FEATURES:append = " sota"
-
# Add firmware required by Up^2 board and default Intel mPCIe wifi card
# sold by upshop.org
MACHINE_EXTRA_RRECOMMENDS:append = " \
# AGL_DEFAULT_IMAGE_FSTYPES to not include them, but for Intel
# we actually do want them for use on physical hardware.
AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap ${@bb.utils.contains('AGL_FEATURES', 'AGLCI', 'wic.vmdk.xz', 'wic.vmdk', d)}"
-IMAGE_BOOT_FILES:sota = "u-boot-qemux86-64.rom"
# Root device
ROOT_VM = "root=PARTUUID=${DISK_SIGNATURE}-02"
# Maximum memory allowed to be assigned
GPU_MEM = "256"
-# Add CMA to the kernel arguments for SOTA
-OSTREE_KERNEL_ARGS:sota:append = " cma=256M"
-
# use u-boot always
RPI_USE_U_BOOT = "1"
# Maximum memory allowed to be assigned
GPU_MEM = "256"
-# Add CMA to the kernel arguments for SOTA
-OSTREE_KERNEL_ARGS:sota:append = " cma=256M"
-
# use u-boot always
RPI_USE_U_BOOT = "1"
-DISTRO_FEATURES:append = " sota"
-
-OSTREE_KERNEL = "Image"
-IMAGE_BOOT_FILES:sota = "renesas-ota-bootfiles/* ${DTB_SUFFIX}.dtb"
-OSTREE_BOOTLOADER ?= "u-boot"
-
WKS_FILE:rcar-gen3 = "singlepart-noloader.wks"
RENESAS_DATADIR = "/usr"
-# Build updatable image. Only takes effect when sota.bbclass is inherited
-DISTRO_FEATURES:append = " sota"
-
# Root device
ROOT_VM = "root=PARTUUID=${DISK_SIGNATURE}-02"
+++ /dev/null
-DESCRIPTION = "Boot script for launching OTA-enabled images on raspberrypi"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-
-DEPENDS = "u-boot-mkimage-native"
-
-COMPATIBLE_MACHINE = "raspberrypi"
-
-SRC_URI = "file://boot.scr \
- file://uEnv.txt \
- file://uEnv.cma.txt \
- "
-
-S = "${WORKDIR}"
-
-inherit deploy
-
-do_deploy() {
- install -d ${DEPLOYDIR}/bcm2835-bootfiles
-
- mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ostree boot script" -d ${S}/boot.scr ${DEPLOYDIR}/bcm2835-bootfiles/boot.scr
- if [ "${ENABLE_CMA}" = "1" ]; then
- install -m 0755 ${S}/uEnv.cma.txt ${DEPLOYDIR}/bcm2835-bootfiles/uEnv.txt
- else
- install -m 0755 ${S}/uEnv.txt ${DEPLOYDIR}/bcm2835-bootfiles/uEnv.txt
- fi
-}
-
-addtask deploy before do_package after do_install
-do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
+++ /dev/null
-fatload mmc 0:1 $loadaddr /uEnv.txt
-env import -t $loadaddr $filesize
-run bootcmd
+++ /dev/null
-bootcmd_resetvars=setenv kernel_image; setenv bootargs; setenv kernel_image2; setenv bootargs2
-bootcmd_otenv=run bootcmd_resetvars; load mmc 0:2 $loadaddr /boot/loader/uEnv.txt; env import -t $loadaddr $filesize
-bootcmd_rollbackenv=setenv kernel_image ${kernel_image2}; setenv bootargs ${bootargs2}
-
-bootcmd_args=setenv bootargs "$bootargs $bootargs_fdt ostree_root=/dev/mmcblk0p2 root=/dev/ram0 rw rootwait rootdelay=2 ramdisk_size=8192 panic=1 coherent_pool=6M smsc95xx.turbo_mode=N"
-
-bootcmd_getroot=setexpr ostree_root gsub "^.*ostree=([^ ]*).*$" "\\\\1" "${bootargs}";
-
-bootcmd_fitconf=run bootcmd_getroot; if test -e mmc 0:2 "${ostree_root}/usr/lib/fit_conf"; then load mmc 0:2 $loadaddr "${ostree_root}/usr/lib/fit_conf"; env import -t $loadaddr $filesize; fi
-
-bootcmd_load=load mmc 0:2 $ramdisk_addr_r "/boot"$kernel_image
-bootcmd_run=bootm "${ramdisk_addr_r}${fit_conf}"
-
-bootcmd_create_envfile=if test ! -e mmc 0:1 uboot.env; then saveenv; fi;
-
-bootlimit=3
-
-bootcmd=if test "${rollback}" = "1"; then run altbootcmd; else run bootcmd_create_envfile; run bootcmd_otenv; run bootcmd_args; run bootcmd_fitconf; run bootcmd_load; run bootcmd_run; if ! "${upgrade_available}" = "1"; then setenv upgrade_available 1; saveenv; fi; reset; fi
-
-bootcmd_set_rollback=if test ! "${rollback}" = "1"; then setenv rollback 1; setenv upgrade_available 0; saveenv; fi
-altbootcmd=run bootcmd_create_envfile; run bootcmd_otenv; run bootcmd_set_rollback; if test -n "${kernel_image2}"; then run bootcmd_rollbackenv; fi; run bootcmd_args; run bootcmd_fitconf; run bootcmd_load; run bootcmd_run; reset
+++ /dev/null
-bootcmd_resetvars=setenv kernel_image; setenv bootargs; setenv kernel_image2; setenv bootargs2
-bootcmd_otenv=run bootcmd_resetvars; load mmc 0:2 $loadaddr /boot/loader/uEnv.txt; env import -t $loadaddr $filesize
-bootcmd_rollbackenv=setenv kernel_image ${kernel_image2}; setenv bootargs ${bootargs2}
-
-bootcmd_args=setenv bootargs "$bootargs $bootargs_fdt ostree_root=/dev/mmcblk0p2 root=/dev/ram0 rw rootwait rootdelay=2 ramdisk_size=8192 panic=1"
-
-bootcmd_getroot=setexpr ostree_root gsub "^.*ostree=([^ ]*).*$" "\\\\1" "${bootargs}";
-
-bootcmd_fitconf=run bootcmd_getroot; if test -e mmc 0:2 "${ostree_root}/usr/lib/fit_conf"; then load mmc 0:2 $loadaddr "${ostree_root}/usr/lib/fit_conf"; env import -t $loadaddr $filesize; fi
-
-bootcmd_load=load mmc 0:2 $ramdisk_addr_r "/boot"$kernel_image
-bootcmd_run=bootm "${ramdisk_addr_r}${fit_conf}"
-
-bootcmd_create_envfile=if test ! -e mmc 0:1 uboot.env; then saveenv; fi;
-
-bootlimit=3
-
-bootcmd=if test "${rollback}" = "1"; then run altbootcmd; else run bootcmd_create_envfile; run bootcmd_otenv; run bootcmd_args; run bootcmd_fitconf; run bootcmd_load; run bootcmd_run; if ! "${upgrade_available}" = "1"; then setenv upgrade_available 1; saveenv; fi; reset; fi
-
-bootcmd_set_rollback=if test ! "${rollback}" = "1"; then setenv rollback 1; setenv upgrade_available 0; saveenv; fi
-altbootcmd=run bootcmd_create_envfile; run bootcmd_otenv; run bootcmd_set_rollback; if test -n "${kernel_image2}"; then run bootcmd_rollbackenv; fi; run bootcmd_args; run bootcmd_fitconf; run bootcmd_load; run bootcmd_run; reset
+++ /dev/null
-bootkaddr=0x49090000
-bootdaddr=0x48000000
-bootiaddr=0x5C3F9520
-
-bootargs_console=console=ttySC0,115200 ignore_loglevel
-bootargs_extra=rw rootfstype=ext4 rootwait rootdelay=2
-bootargs_root=ostree_root=/dev/mmcblk1p2 root=/dev/ram0 ramdisk_size=16384
-
-bootmmc=0:1
-rootmmc=0:2
-
-booteload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/loader/uEnv.txt; env import -t ${bootkaddr} ${filesize}
-bootkload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/${kernel_image}
-bootiload_sd=ext4load mmc ${rootmmc} ${bootiaddr} boot/${ramdisk_image}; setenv ramdisk_size ${filesize}
-bootdload_sd=fatload mmc ${bootmmc} ${bootdaddr} r8a7795-salvator-xs.dtb
-
-bootcmd=run booteload_sd; setenv bootargs ${bootargs} ${bootargs_console} ${bootargs_root} ${bootargs_extra}; run bootkload_sd; run bootiload_sd; run bootdload_sd; booti ${bootkaddr} ${bootiaddr}:${ramdisk_size} ${bootdaddr}
-
+++ /dev/null
-bootkaddr=0x49090000
-bootdaddr=0x48000000
-bootiaddr=0x5C3F9520
-
-bootargs_console=console=ttySC0,115200 ignore_loglevel
-bootargs_extra=rw rootfstype=ext4 rootwait rootdelay=2
-bootargs_root=ostree_root=/dev/mmcblk1p2 root=/dev/ram0 ramdisk_size=16384
-
-bootmmc=0:1
-rootmmc=0:2
-
-booteload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/loader/uEnv.txt; env import -t ${bootkaddr} ${filesize}
-bootkload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/${kernel_image}
-bootiload_sd=ext4load mmc ${rootmmc} ${bootiaddr} boot/${ramdisk_image}; setenv ramdisk_size ${filesize}
-bootdload_sd=fatload mmc ${bootmmc} ${bootdaddr} r8a77951-ulcb.dtb
-
-bootcmd=run booteload_sd; setenv bootargs ${bootargs} ${bootargs_console} ${bootargs_root} ${bootargs_extra}; run bootkload_sd; run bootiload_sd; run bootdload_sd; booti ${bootkaddr} ${bootiaddr}:${ramdisk_size} ${bootdaddr}
-
+++ /dev/null
-bootkaddr=0x49090000
-bootdaddr=0x48000000
-bootiaddr=0x5C3F9520
-
-bootargs_console=console=ttySC0,115200 ignore_loglevel
-bootargs_extra=rw rootfstype=ext4 rootwait rootdelay=2
-bootargs_root=ostree_root=/dev/mmcblk1p2 root=/dev/ram0 ramdisk_size=16384
-
-bootmmc=0:1
-rootmmc=0:2
-
-booteload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/loader/uEnv.txt; env import -t ${bootkaddr} ${filesize}
-bootkload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/${kernel_image}
-bootiload_sd=ext4load mmc ${rootmmc} ${bootiaddr} boot/${ramdisk_image}; setenv ramdisk_size ${filesize}
-bootdload_sd=fatload mmc ${bootmmc} ${bootdaddr} r8a7796-salvator-xs.dtb
-
-bootcmd=run booteload_sd; setenv bootargs ${bootargs} ${bootargs_console} ${bootargs_root} ${bootargs_extra}; run bootkload_sd; run bootiload_sd; run bootdload_sd; booti ${bootkaddr} ${bootiaddr}:${ramdisk_size} ${bootdaddr}
-
+++ /dev/null
-bootkaddr=0x49090000
-bootdaddr=0x48000000
-bootiaddr=0x5C3F9520
-
-bootargs_console=console=ttySC0,115200 ignore_loglevel
-bootargs_extra=rw rootfstype=ext4 rootwait rootdelay=2
-bootargs_root=ostree_root=/dev/mmcblk1p2 root=/dev/ram0 ramdisk_size=16384
-
-bootmmc=0:1
-rootmmc=0:2
-
-booteload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/loader/uEnv.txt; env import -t ${bootkaddr} ${filesize}
-bootkload_sd=ext4load mmc ${rootmmc} ${bootkaddr} boot/${kernel_image}
-bootiload_sd=ext4load mmc ${rootmmc} ${bootiaddr} boot/${ramdisk_image}; setenv ramdisk_size ${filesize}
-bootdload_sd=fatload mmc ${bootmmc} ${bootdaddr} r8a77960-ulcb.dtb
-
-bootcmd=run booteload_sd; setenv bootargs ${bootargs} ${bootargs_console} ${bootargs_root} ${bootargs_extra}; run bootkload_sd; run bootiload_sd; run bootdload_sd; booti ${bootkaddr} ${bootiaddr}:${ramdisk_size} ${bootdaddr}
-
+++ /dev/null
-DESCRIPTION = "Boot files (bootscripts etc.) for Renesas RCar-M3 board"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-
-inherit deploy
-
-COMPATIBLE_MACHINE = "(salvator-x|m3ulcb|h3ulcb|ebisu)"
-
-S = "${WORKDIR}"
-
-SRC_URI:append:sota = " file://uEnv-ota-m3ulcb.txt \
- file://uEnv-ota-h3ulcb.txt \
- file://uEnv-ota-h3-salvator-xs \
- file://uEnv-ota-m3-salvator-xs"
-do_deploy() {
- install -d ${DEPLOYDIR}/${PN}
-}
-
-do_deploy:append:sota() {
- install -m 0755 ${WORKDIR}/uEnv-ota-${BOARD_NAME}.txt ${DEPLOYDIR}/${PN}/uEnv.txt
-}
-
-addtask deploy before do_package after do_install
-do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
Code Review / AGL / meta-agl.git / commitdiff