7. Launch QEMU with vinagre (for scaling), remove `- snapshot \` if you want to save changes to the image files :
-```sh
- $ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
- qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:35:02 -netdev user,id=net0,hostfwd=tcp::2222-:22 \
- -drive file=agl-demo-platform-crosssdk-qemux86-64.ext4,if=virtio,format=raw -show-cursor -usb -usbdevice tablet -device virtio-rng-pci \
- -snapshot -vga virtio \
- -vnc :0 -soundhw hda -machine q35 -cpu kvm64 -cpu qemu64,+ssse3,+sse4.1,+sse4.2,+popcnt -enable-kvm \
- -m 2048 -serial mon:vc -serial mon:stdio -serial null -kernel bzImage \
- -append 'root=/dev/vda rw console=tty0 mem=2048M ip=dhcp oprofile.timer=1 console=ttyS0,115200n8 verbose fstab=no'
-```
+ ```sh
+ $ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
+ qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:35:02 -netdev user,id=net0,hostfwd=tcp::2222-:22 \
+ -drive file=agl-demo-platform-crosssdk-qemux86-64.ext4,if=virtio,format=raw -show-cursor -usb -usbdevice tablet -device virtio-rng-pci \
+ -snapshot -vga virtio \
+ -vnc :0 -soundhw hda -machine q35 -cpu kvm64 -cpu qemu64,+ssse3,+sse4.1,+sse4.2,+popcnt -enable-kvm \
+ -m 2048 -serial mon:vc -serial mon:stdio -serial null -kernel bzImage \
+ -append 'root=/dev/vda rw console=tty0 mem=2048M ip=dhcp oprofile.timer=1 console=ttyS0,115200n8 verbose fstab=no'
+ ```
- Login into AGL :
3. Boot from USB drive on the x86 system.
+## ARM 32 bit (Emulation and Hardware)
-## Raspberry Pi 4
+### 1. QEMU (Emulation)
+
+1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz).
+
+2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/zImage).
+
+3. Install [QEMU](https://www.qemu.org/download/) :
+
+ ```sh
+ $ apt-get install qemu
+ ```
+
+4. Install [vinagre](https://wiki.gnome.org/Apps/Vinagre) :
+
+ ```sh
+ $ sudo apt install vinagre
+ ```
+
+5. Create boot directory and copy compressed images (prebuilt & kernel) into them :
+
+ ```sh
+ $ mkdir ~/agl-demo/
+ $ cp ~/Downloads/agl-demo-platform-crosssdk-qemuarm.ext4.xz ~/agl-demo/
+ $ cp ~/Downloads/zImage ~/agl-demo/
+ $ cd ~/agl-demo
+ $ sync
+ ```
+
+6. Extract prebuilt compressed image :
+
+ ```sh
+ $ xz -v -d agl-demo-platform-crosssdk-qemuarm.ext4.xz
+ ```
+
+7. Launch QEMU with vinagre (for scaling), remove `- snapshot \` if you want to save changes to the image files :
+
+ ```sh
+ $ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
+ qemu-system-arm -cpu cortex-a15 -machine virt-2.11 -nographic \
+ -net nic,model=virtio,macaddr=52:54:00:12:34:58 \
+ -net user -m 2048 -monitor none -soundhw hda -device usb-ehci \
+ -device virtio-rng-pci -device VGA,vgamem_mb=64,edid=on -vnc :0 \
+ -device qemu-xhci -device usb-tablet -device usb-kbd \
+ -kernel zImage -append "console=ttyAMA0,115200 root=/dev/vda verbose systemd.log_color=false" \
+ -drive format=raw,file=agl-demo-platform-crosssdk-qemuarm.ext4 \
+ -snapshot
+ ```
+
+ - Login into AGL :
+
+ ```sh
+ Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+
+ qemux86-64 login: root
+ ```
+
+
+ - Shutdown QEMU : `$ poweroff`, otherwise QEMU will run in the background.
+ - To use vnc-viewer instead of vinagre :
+ ```sh
+ $ ( sleep 5 && vncviewer ) &
+ qemu-system-arm -cpu cortex-a15 -machine virt-2.11 -nographic \
+ -net nic,model=virtio,macaddr=52:54:00:12:34:58 \
+ -net user -m 2048 -monitor none -soundhw hda -device usb-ehci \
+ -device virtio-rng-pci -device VGA,vgamem_mb=64,edid=on -vnc :0 \
+ -device qemu-xhci -device usb-tablet -device usb-kbd \
+ -kernel zImage -append "console=ttyAMA0,115200 root=/dev/vda verbose systemd.log_color=false" \
+ -drive format=raw,file=agl-demo-platform-crosssdk-qemuarm.ext4 \
+ -snapshot
+ ```
+
+### 2. BeagleBone Enhanced (BBE)
+
+ 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/bbe/deploy/images/bbe/agl-demo-platform-crosssdk-bbe.wic.xz).
+
+ 2. Extract the image into the SD card of BeagleBone Enhanced :
+
+ ```sh
+ $ lsblk
+ $ sudo umount <sdcard_device_name>
+ $ xzcat agl-demo-platform-crosssdk-bbe.wic.xz | sudo dd of=<sdcard_device_name> bs=4M
+ $ sync
+ ```
+
+ **IMPORTANT NOTE:** Before re-writing any device on your Build Host, you need to
+ be sure you are actually writing to the removable MicroSD card and not some other
+ device.
+ Each computer is different and removable devices can change from time to time.
+ Consequently, you should repeat the previous operation with the MicroSD card to
+ confirm the device name every time you write to the card.
+
+ To summarize this example so far, we have the following:
+ The first SATA drive is `/dev/sda` and `/dev/sdc` corresponds to the MicroSD card, and is also marked as a removable device.You can see this in the output of the `lsblk` command where "1" appears in the "RM" column for that device.
+
+## AARCH64 - ARM 64bit
+
+### 1. QEMU (Emulation)
+
+1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz).
+
+2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/Image).
+
+3. Install [QEMU](https://www.qemu.org/download/) :
+
+ ```sh
+ $ apt-get install qemu
+ ```
+
+4. Install [vinagre](https://wiki.gnome.org/Apps/Vinagre) :
+
+ ```sh
+ $ sudo apt install vinagre
+ ```
+
+5. Create boot directory and copy compressed images (prebuilt & kernel) into them :
+
+ ```sh
+ $ mkdir ~/agl-demo/
+ $ cp ~/Downloads/agl-demo-platform-crosssdk-qemuarm64.ext4.xz ~/agl-demo/
+ $ cp ~/Downloads/zImage ~/agl-demo/
+ $ cd ~/agl-demo
+ $ sync
+ ```
+
+6. Extract prebuilt compressed image :
+
+ ```sh
+ $ xz -v -d agl-demo-platform-crosssdk-qemuarm64.ext4.xz
+ ```
+
+7. Launch QEMU with vinagre (for scaling), remove `- snapshot \` if you want to save changes to the image files :
+
+ ```sh
+ $ ( sleep 5 && vinagre --vnc-scale localhost ) > /tmp/vinagre.log 2>&1 &
+ qemu-system-aarch64 -cpu cortex-a57 -machine virt -nographic \
+ -net nic,model=virtio,macaddr=52:54:00:12:34:58 \
+ -net user -m 2048 -monitor none -smp 2 -soundhw hda -device usb-ehci \
+ -device virtio-rng-pci -device VGA,vgamem_mb=64,edid=on \
+ -device qemu-xhci -device usb-tablet -device usb-kbd -vnc :0 \
+ -kernel Image -append "console=ttyAMA0,115200 root=/dev/vda verbose systemd.log_color=false " \
+ -drive format=raw,file=agl-demo-platform-crosssdk-qemuarm64.ext4 \
+ -snapshot
+ ```
+
+ - Login into AGL :
+
+ ```sh
+ Automotive Grade Linux 9.99.4+snapshot qemux86-64 ttyS1
+
+ qemux86-64 login: root
+ ```
+
+
+ - Shutdown QEMU : `$ poweroff`, otherwise QEMU will run in the background.
+ - To use vnc-viewer instead of vinagre :
+ ```sh
+ $ ( sleep 5 && vncviewer ) &
+ qemu-system-aarch64 -cpu cortex-a57 -machine virt -nographic \
+ -net nic,model=virtio,macaddr=52:54:00:12:34:58 \
+ -net user -m 2048 -monitor none -smp 2 -soundhw hda -device usb-ehci \
+ -device virtio-rng-pci -device VGA,vgamem_mb=64,edid=on \
+ -device qemu-xhci -device usb-tablet -device usb-kbd -vnc :0 \
+ -kernel Image -append "console=ttyAMA0,115200 root=/dev/vda verbose systemd.log_color=false " \
+ -drive format=raw,file=agl-demo-platform-crosssdk-qemuarm64.ext4 \
+ -snapshot
+ ```
+
+### 2. Raspberry Pi 4
1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz).
$ sudo screen /dev/ttyUSB0 115200
```
-## R-Car H3SK (H3ULCB board)
+### 3. R-Car H3SK (H3ULCB board)
**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required.
Code Review / AGL / documentation.git / commitdiff