Update image file for H3ULCB on lamprey

Change the filename and also add note wrt un-accelerated gfx vs. local build w/ proprietary drivers.

Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I3da37c3aee9a06aa3cd708f1404ff45334153c09
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/documentation/+/26502

diff --git a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md
index 436d62f..9d2f064 100644 (file)
--- a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md
+++ b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md
@@ -360,19 +360,19 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt
 
 ### 3. R-Car H3SK (H3ULCB board)
 
-**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required.
+**NOTE :** The prebuilt image does support graphics only in **non-accelerated** mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required.
 
 
   1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
 
-  2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz).
+  2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz).
 
   3. Extract the image into the boot device :
 
      ```sh
      $ lsblk
      $ sudo umount <boot_device_name>
-     $ xzcat agl-image-ivi-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M
+     $ xzcat agl-demo-platform-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M
      $ sync
      ```