Remove moved functions into configuration class

Change-Id: Ia8aa6a9f6211c2e040f53972ba689aecdeda9011
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

diff --git a/src/can/can-bus.hpp b/src/can/can-bus.hpp
index 0c3709f..308d83b 100644 (file)
--- a/src/can/can-bus.hpp
+++ b/src/can/can-bus.hpp
@@ -91,29 +91,3 @@ public:
        std::map<std::string, std::shared_ptr<can_bus_dev_t>> get_can_devices();
 };
 
-/// TODO: implement this function as method into can_bus class
-/// @brief Pre initialize actions made before CAN bus initialization
-/// @param[in] bus A CanBus struct defining the bus's metadata
-/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
-/// @param[in] buses An array of all CAN buses.
-/// @param[in] busCount The length of the buses array.
-void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Post-initialize actions made after CAN bus initialization
-/// @param[in] bus A CanBus struct defining the bus's metadata
-/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
-/// @param[in] buses An array of all CAN buses.
-/// @param[in] busCount The length of the buses array.
-void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
-/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
-bool isBusActive(can_bus_dev_t* bus);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Log transfer statistics about all active CAN buses to the debug log.
-/// @param[in] buses An array of active CAN buses.
-/// @param[in] busCount The length of the buses array.
-void logBusStatistics(can_bus_dev_t* buses, const int busCount);

diff --git a/src/configuration.hpp b/src/configuration.hpp
index 13f4200..4a41f24 100644 (file)
--- a/src/configuration.hpp
+++ b/src/configuration.hpp
@@ -110,4 +110,32 @@ class configuration_t
                void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
                void logBusStatistics(can_bus_dev_t* buses, const int busCount);
                bool isBusActive(can_bus_dev_t* bus);
-};
\ No newline at end of file
+};
+
+/// TODO: implement this function as method into can_bus class
+/// @brief Pre initialize actions made before CAN bus initialization
+/// @param[in] bus A CanBus struct defining the bus's metadata
+/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+/// @param[in] buses An array of all CAN buses.
+/// @param[in] busCount The length of the buses array.
+void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+
+/// TODO: implement this function as method into can_bus class
+/// @brief Post-initialize actions made after CAN bus initialization
+/// @param[in] bus A CanBus struct defining the bus's metadata
+/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+/// @param[in] buses An array of all CAN buses.
+/// @param[in] busCount The length of the buses array.
+void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+
+/// TODO: implement this function as method into can_bus class
+/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
+/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
+bool isBusActive(can_bus_dev_t* bus);
+
+/// TODO: implement this function as method into can_bus class
+/// @brief Log transfer statistics about all active CAN buses to the debug log.
+/// @param[in] buses An array of active CAN buses.
+/// @param[in] busCount The length of the buses array.
+void logBusStatistics(can_bus_dev_t* buses, const int busCount);
+