+++ /dev/null
-/*
- * This code is taken from https://gist.github.com/roychen
- * */
-
-#ifndef __INC_AFB_HELPERS_LIST_H
-#define __INC_AFB_HELPERS_LIST_H
-
-#include <stdio.h>
-
-#ifndef offsetof
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-#endif
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1 ((void *) 0x00100100)
-#define LIST_POISON2 ((void *) 0x00200200)
-
-struct list_head {
- struct list_head *next, *prev;
-};
-
-struct hlist_head {
- struct hlist_node *first;
-};
-
-struct hlist_node {
- struct hlist_node *next, **pprev;
-};
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
- struct list_head name = LIST_HEAD_INIT(name)
-
-static inline void INIT_LIST_HEAD(struct list_head *list)
-{
- list->next = list;
- list->prev = list;
-}
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-#ifndef CONFIG_DEBUG_LIST
-static inline void __list_add(struct list_head *new,
- struct list_head *prev,
- struct list_head *next)
-{
- next->prev = new;
- new->next = next;
- new->prev = prev;
- prev->next = new;
-}
-#else
-extern void __list_add(struct list_head *new,
- struct list_head *prev,
- struct list_head *next);
-#endif
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head, head->next);
-}
-
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
- next->prev = prev;
- prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty() on entry does not return true after this, the entry is
- * in an undefined state.
- */
-#ifndef CONFIG_DEBUG_LIST
-static inline void __list_del_entry(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
-}
-
-static inline void list_del(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- entry->next = LIST_POISON1;
- entry->prev = LIST_POISON2;
-}
-#else
-extern void __list_del_entry(struct list_head *entry);
-extern void list_del(struct list_head *entry);
-#endif
-
-/**
- * list_replace - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * If @old was empty, it will be overwritten.
- */
-static inline void list_replace(struct list_head *old,
- struct list_head *new)
-{
- new->next = old->next;
- new->next->prev = new;
- new->prev = old->prev;
- new->prev->next = new;
-}
-
-static inline void list_replace_init(struct list_head *old,
- struct list_head *new)
-{
- list_replace(old, new);
- INIT_LIST_HEAD(old);
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
- __list_del_entry(entry);
- INIT_LIST_HEAD(entry);
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
- __list_del_entry(list);
- list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
- struct list_head *head)
-{
- __list_del_entry(list);
- list_add_tail(list, head);
-}
-
-/**
- * list_is_last - tests whether @list is the last entry in list @head
- * @list: the entry to test
- * @head: the head of the list
- */
-static inline int list_is_last(const struct list_head *list,
- const struct list_head *head)
-{
- return list->next == head;
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
- return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is empty and not being modified
- * @head: the list to test
- *
- * Description:
- * tests whether a list is empty _and_ checks that no other CPU might be
- * in the process of modifying either member (next or prev)
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
- struct list_head *next = head->next;
- return (next == head) && (next == head->prev);
-}
-
-/**
- * list_rotate_left - rotate the list to the left
- * @head: the head of the list
- */
-static inline void list_rotate_left(struct list_head *head)
-{
- struct list_head *first;
-
- if (!list_empty(head)) {
- first = head->next;
- list_move_tail(first, head);
- }
-}
-
-/**
- * list_is_singular - tests whether a list has just one entry.
- * @head: the list to test.
- */
-static inline int list_is_singular(const struct list_head *head)
-{
- return !list_empty(head) && (head->next == head->prev);
-}
-
-static inline void __list_cut_position(struct list_head *list,
- struct list_head *head, struct list_head *entry)
-{
- struct list_head *new_first = entry->next;
- list->next = head->next;
- list->next->prev = list;
- list->prev = entry;
- entry->next = list;
- head->next = new_first;
- new_first->prev = head;
-}
-
-/**
- * list_cut_position - cut a list into two
- * @list: a new list to add all removed entries
- * @head: a list with entries
- * @entry: an entry within head, could be the head itself
- * and if so we won't cut the list
- *
- * This helper moves the initial part of @head, up to and
- * including @entry, from @head to @list. You should
- * pass on @entry an element you know is on @head. @list
- * should be an empty list or a list you do not care about
- * losing its data.
- *
- */
-static inline void list_cut_position(struct list_head *list,
- struct list_head *head, struct list_head *entry)
-{
- if (list_empty(head))
- return;
- if (list_is_singular(head) &&
- (head->next != entry && head != entry))
- return;
- if (entry == head)
- INIT_LIST_HEAD(list);
- else
- __list_cut_position(list, head, entry);
-}
-
-static inline void __list_splice(const struct list_head *list,
- struct list_head *prev,
- struct list_head *next)
-{
- struct list_head *first = list->next;
- struct list_head *last = list->prev;
-
- first->prev = prev;
- prev->next = first;
-
- last->next = next;
- next->prev = last;
-}
-
-/**
- * list_splice - join two lists, this is designed for stacks
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(const struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list))
- __list_splice(list, head, head->next);
-}
-
-/**
- * list_splice_tail - join two lists, each list being a queue
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice_tail(struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list))
- __list_splice(list, head->prev, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list)) {
- __list_splice(list, head, head->next);
- INIT_LIST_HEAD(list);
- }
-}
-
-/**
- * list_splice_tail_init - join two lists and reinitialise the emptied list
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * Each of the lists is a queue.
- * The list at @list is reinitialised
- */
-static inline void list_splice_tail_init(struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list)) {
- __list_splice(list, head->prev, head);
- INIT_LIST_HEAD(list);
- }
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr: the &struct list_head pointer.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
- container_of(ptr, type, member)
-
-/**
- * list_first_entry - get the first element from a list
- * @ptr: the list head to take the element from.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- */
-#define list_first_entry(ptr, type, member) \
- list_entry((ptr)->next, type, member)
-
-/**
- * list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * __list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- *
- * This variant doesn't differ from list_for_each() any more.
- * We don't do prefetching in either case.
- */
-#define __list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev - iterate over a list backwards
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each_prev(pos, head) \
- for (pos = (head)->prev; pos != (head); pos = pos->prev)
-
-/**
- * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos: the &struct list_head to use as a loop cursor.
- * @n: another &struct list_head to use as temporary storage
- * @head: the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
- for (pos = (head)->next, n = pos->next; pos != (head); \
- pos = n, n = pos->next)
-
-/**
- * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
- * @pos: the &struct list_head to use as a loop cursor.
- * @n: another &struct list_head to use as temporary storage
- * @head: the head for your list.
- */
-#define list_for_each_prev_safe(pos, n, head) \
- for (pos = (head)->prev, n = pos->prev; \
- pos != (head); \
- pos = n, n = pos->prev)
-
-/**
- * list_for_each_entry - iterate over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
- * @pos: the type * to use as a start point
- * @head: the head of the list
- * @member: the name of the list_struct within the struct.
- *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
- */
-#define list_prepare_entry(pos, head, member) \
- ((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue - continue iteration over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue(pos, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue_reverse - iterate backwards from the given point
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Start to iterate over list of given type backwards, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue_reverse(pos, head, member) \
- for (pos = list_entry(pos->member.prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing from current position.
- */
-#define list_for_each_entry_from(pos, head, member) \
- for (; &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_continue - continue list iteration safe against removal
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing after current point,
- * safe against removal of list entry.
- */
-#define list_for_each_entry_safe_continue(pos, n, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_from - iterate over list from current point safe against removal
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type from current point, safe against
- * removal of list entry.
- */
-#define list_for_each_entry_safe_from(pos, n, head, member) \
- for (n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_reverse - iterate backwards over list safe against removal
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate backwards over list of given type, safe against removal
- * of list entry.
- */
-#define list_for_each_entry_safe_reverse(pos, n, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member), \
- n = list_entry(pos->member.prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-
-/**
- * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
- * @pos: the loop cursor used in the list_for_each_entry_safe loop
- * @n: temporary storage used in list_for_each_entry_safe
- * @member: the name of the list_struct within the struct.
- *
- * list_safe_reset_next is not safe to use in general if the list may be
- * modified concurrently (eg. the lock is dropped in the loop body). An
- * exception to this is if the cursor element (pos) is pinned in the list,
- * and list_safe_reset_next is called after re-taking the lock and before
- * completing the current iteration of the loop body.
- */
-#define list_safe_reset_next(pos, n, member) \
- n = list_entry(pos->member.next, typeof(*pos), member)
-
-/*
- * Double linked lists with a single pointer list head.
- * Mostly useful for hash tables where the two pointer list head is
- * too wasteful.
- * You lose the ability to access the tail in O(1).
- */
-
-#define HLIST_HEAD_INIT { .first = NULL }
-#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
-#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-static inline void INIT_HLIST_NODE(struct hlist_node *h)
-{
- h->next = NULL;
- h->pprev = NULL;
-}
-
-static inline int hlist_unhashed(const struct hlist_node *h)
-{
- return !h->pprev;
-}
-
-static inline int hlist_empty(const struct hlist_head *h)
-{
- return !h->first;
-}
-
-static inline void __hlist_del(struct hlist_node *n)
-{
- struct hlist_node *next = n->next;
- struct hlist_node **pprev = n->pprev;
- *pprev = next;
- if (next)
- next->pprev = pprev;
-}
-
-static inline void hlist_del(struct hlist_node *n)
-{
- __hlist_del(n);
- n->next = LIST_POISON1;
- n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_del_init(struct hlist_node *n)
-{
- if (!hlist_unhashed(n)) {
- __hlist_del(n);
- INIT_HLIST_NODE(n);
- }
-}
-
-static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
-{
- struct hlist_node *first = h->first;
- n->next = first;
- if (first)
- first->pprev = &n->next;
- h->first = n;
- n->pprev = &h->first;
-}
-
-/* next must be != NULL */
-static inline void hlist_add_before(struct hlist_node *n,
- struct hlist_node *next)
-{
- n->pprev = next->pprev;
- n->next = next;
- next->pprev = &n->next;
- *(n->pprev) = n;
-}
-
-static inline void hlist_add_after(struct hlist_node *n,
- struct hlist_node *next)
-{
- next->next = n->next;
- n->next = next;
- next->pprev = &n->next;
-
- if(next->next)
- next->next->pprev = &next->next;
-}
-
-/* after that we'll appear to be on some hlist and hlist_del will work */
-static inline void hlist_add_fake(struct hlist_node *n)
-{
- n->pprev = &n->next;
-}
-
-/*
- * Move a list from one list head to another. Fixup the pprev
- * reference of the first entry if it exists.
- */
-static inline void hlist_move_list(struct hlist_head *old,
- struct hlist_head *new)
-{
- new->first = old->first;
- if (new->first)
- new->first->pprev = &new->first;
- old->first = NULL;
-}
-
-#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
-
-#define hlist_for_each(pos, head) \
- for (pos = (head)->first; pos ; pos = pos->next)
-
-#define hlist_for_each_safe(pos, n, head) \
- for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
- pos = n)
-
-/**
- * hlist_for_each_entry - iterate over list of given type
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry(tpos, pos, head, member) \
- for (pos = (head)->first; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue(tpos, pos, member) \
- for (pos = (pos)->next; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_from(tpos, pos, member) \
- for (; pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @n: another &struct hlist_node to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \
- for (pos = (head)->first; \
- pos && ({ n = pos->next; 1; }) && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = n)
-
-#endif
Code Review / apps / app-afb-helpers-submodule.git / commitdiff