Update base local.conf.sample

Update local.conf.sample to the zeus version. This is required to
pick up default qemu configuration changes that are needed to get
qemu SDL support enabled.

Bug-AGL: SPEC-2932

Change-Id: I7a10ea42931dbb9c7e2c0dc4f2a15666d829f65d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>

diff --git a/templates/base/local.conf.sample b/templates/base/local.conf.sample
index 365b6eb..2e0bb41 100644 (file)
--- a/templates/base/local.conf.sample
+++ b/templates/base/local.conf.sample
@@ -28,14 +28,14 @@
 # There are also the following hardware board target machines included for 
 # demonstration purposes:
 #
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
 #MACHINE ?= "genericx86"
 #MACHINE ?= "genericx86-64"
 #MACHINE ?= "mpc8315e-rdb"
 #MACHINE ?= "edgerouter"
 #
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86"
+# This sets the default machine to be qemux86-64 if no other machine is selected:
+MACHINE ??= "qemux86-64"
 
 #
 # Where to place downloads
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
 # variable can contain the following options:
 #  "dbg-pkgs"       - add -dbg packages for all installed packages
 #                     (adds symbol information for debugging/profiling)
+#  "src-pkgs"       - add -src packages for all installed packages
+#                     (adds source code for debugging)
 #  "dev-pkgs"       - add -dev packages for all installed packages
 #                     (useful if you want to develop against libs in the image)
 #  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
@@ -149,7 +151,6 @@ EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
 #   - 'buildstats' collect build statistics
 #   - 'image-mklibs' to reduce shared library files size for an image
 #   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
 # NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
 # NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
 USER_CLASSES ?= "buildstats image-mklibs image-prelink"
@@ -158,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
 # Runtime testing of images
 #
 # The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
 #
 # Interactive shell configuration
 #
@@ -191,7 +194,7 @@ PATCHRESOLVE = "noop"
 # files and damages the build in ways which may not be easily recoverable.
 # It's necesary to monitor /tmp, if there is no space left the build will fail
 # with very exotic errors.
-BB_DISKMON_DIRS = "\
+BB_DISKMON_DIRS ??= "\
     STOPTASKS,${TMPDIR},1G,100K \
     STOPTASKS,${DL_DIR},1G,100K \
     STOPTASKS,${SSTATE_DIR},1G,100K \
@@ -219,17 +222,45 @@ BB_DISKMON_DIRS = "\
 #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
 #file://.* file:///some/local/dir/sstate/PATH"
 
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
 
 #
 # Qemu configuration
 #
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
-# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+# By default native qemu will build with a builtin VNC server where graphical output can be
+# seen. The line below enables the SDL UI frontend too.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
+# By default libsdl2-native will be built, if you want to use your host's libSDL instead of 
+# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
+# a handy set of menus for controlling the emulator.
+#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+"
+
+#
+# Hash Equivalence
+#
+# Enable support for automatically running a local hash equivalence server and
+# instruct bitbake to use a hash equivalence aware signature generator. Hash
+# equivalence improves reuse of sstate by detecting when a given sstate
+# artifact can be reused as equivalent, even if the current task hash doesn't
+# match the one that generated the artifact.
+#
+# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
+#
+#BB_HASHSERVE = "auto"
+#BB_SIGNATURE_HANDLER = "OEEquivHash"
 
 # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
 # track the version of this file when it was generated. This can safely be ignored if