meta-intel: Switch to using WIC images only

The hddimg format has a hard-stop at 4GB sized images.  We can trigger
this rather easily at this point under agl-demo-platform-crosssdk.  WIC
images do not have any such limitation, so we remove hddimg from the
list of built images.  The main impact of this is that whereas before we
would modify the default kernel command line via APPEND in the conf file
we would now modify it via the wks file we create for each platform and
that mkefi-agl.sh is now redundant.  These wks files are based on the
systemd one but also reflect the design of mkefi-agl.sh in that they
drop the swap partition.  Much of the APPEND commentary is moved to the
wks file and we remove some irrelevant comments as well.

Bug-AGL: SPEC-963
Change-Id: If667e1f946e4b9793b63f6d7f572d56d73e35767
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12159
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>

diff --git a/meta-agl-bsp/conf/include/agl_intel-corei7-64.inc b/meta-agl-bsp/conf/include/agl_intel-corei7-64.inc
index 36d6f47..cc181dd 100644 (file)
--- a/meta-agl-bsp/conf/include/agl_intel-corei7-64.inc
+++ b/meta-agl-bsp/conf/include/agl_intel-corei7-64.inc
@@ -1,22 +1,3 @@
-# Configurations to run on VirtualBox/VMWare
-#
-# To get wide screen than default, there are a selection of resolutions
-# available:
-#
-#APPEND += "uvesafb.mode_option=1024x768-32"
-#APPEND += "uvesafb.mode_option=1280x1024-32"
-#APPEND += "uvesafb.mode_option=1600x1200-32"
-#
-# To avoid corrupt boot screen by systemd message, you can use serial
-# console separated from VGA console or disable all boot messages by
-# kernel command line.
-#
-# Configuration for serial console
-APPEND += "console=ttyS0,115200n8 reboot=efi"
-#
-# All boot message will be off
-#APPEND += "quiet"
-
 # Enable Libvaapi for HW accelerated video support
 #
 IMAGE_INSTALL_append = " \
@@ -24,6 +5,9 @@ IMAGE_INSTALL_append = " \
         va-intel \
         gstreamer1.0-vaapi"
 
-AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum hddimg"
+AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum"
 INITRD_LIVE = "${DEPLOY_DIR_IMAGE}/${INITRD_IMAGE_LIVE}-${MACHINE}.ext4.gz"
-NOISO = "1"
+
+# Modify this file under meta-agl-bsp/meta-intel/wic to change the
+# kernel command line, including to change the screen resolution.
+WKS_FILE = "systemd-intel-corei7-64-bootdisk.wks"

diff --git a/meta-agl-bsp/conf/include/agl_joule.inc b/meta-agl-bsp/conf/include/agl_joule.inc
index 310b089..d295634 100644 (file)
--- a/meta-agl-bsp/conf/include/agl_joule.inc
+++ b/meta-agl-bsp/conf/include/agl_joule.inc
@@ -1,7 +1,5 @@
 INTEL_MACHINE_SUBTYPE = "broxton-m"
 
-APPEND += "console=ttyS2,115200n8 video=efifb maxcpus=4 noxsave reboot=efi kmemleak=off"
-
 IMAGE_INSTALL_append = " linux-firmware-iwlwifi-8000c linux-firmware-ibt-11-5"
 IMAGE_INSTALL_append = " \
         libva \
@@ -9,6 +7,8 @@ IMAGE_INSTALL_append = " \
         gstreamer1.0-vaapi"
 OSTREE_BOOTLOADER ?= "u-boot"
 
-AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum hddimg"
+AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum"
 INITRD_LIVE = "${DEPLOY_DIR_IMAGE}/${INITRD_IMAGE_LIVE}-${MACHINE}.ext4.gz"
-NOISO = "1"
+# Modify this file under meta-agl-bsp/meta-intel/wic to change the
+# kernel command line
+WKS_FILE = "systemd-joule-bootdisk.wks"

diff --git a/meta-agl-bsp/wic/systemd-intel-corei7-64-bootdisk.wks b/meta-agl-bsp/wic/systemd-intel-corei7-64-bootdisk.wks
new file mode 100644 (file)
index 0000000..828969b
--- /dev/null
+++ b/meta-agl-bsp/wic/systemd-intel-corei7-64-bootdisk.wks
@@ -0,0 +1,23 @@
+# short-description: Custom EFI disk image with systemd-boot
+# long-description: Creates a partitioned EFI disk image that the user
+# can directly dd to boot media. The selected bootloader is systemd-boot
+# and we do not have swap
+
+part /boot --source bootimg-efi --sourceparams="loader=systemd-boot" --ondisk sda --label msdos --active --align 1024
+
+part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 --use-uuid
+
+# Modify the append line here as needed to suit the environment.
+#
+# To change the default video resolution add one of the following
+# resolutions:
+# uvesafb.mode_option=1024x768-32
+# uvesafb.mode_option=1280x1024-32
+# uvesafb.mode_option=1600x1200-32
+#
+# To avoid corrupt boot screen by systemd message you can remove the
+# console=tty0 portion below or disable all boot messages by kernel command
+# line.  To disable all boot messages add:
+#
+# quiet
+bootloader --ptable gpt --timeout=5 --append="rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 reboot=efi"

diff --git a/meta-agl-bsp/wic/systemd-joule-bootdisk.wks b/meta-agl-bsp/wic/systemd-joule-bootdisk.wks
new file mode 100644 (file)
index 0000000..ab75beb
--- /dev/null
+++ b/meta-agl-bsp/wic/systemd-joule-bootdisk.wks
@@ -0,0 +1,12 @@
+# short-description: Custom EFI disk image with systemd-boot
+# long-description: Creates a partitioned EFI disk image that the user
+# can directly dd to boot media. The selected bootloader is systemd-boot
+# and we do not have swap.  We assume a Joule system and provide an
+# appropriate kernel command line.
+
+part /boot --source bootimg-efi --sourceparams="loader=systemd-boot" --ondisk sda --label msdos --active --align 1024
+
+part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 --use-uuid
+
+# Modify the append line here as needed to suit the environment
+bootloader --ptable gpt --timeout=5 --append="rootwait rootfstype=ext4 console=ttyS2,115200n8 console=tty0 video=efifb maxcpus=4 noxsave reboot=efi kmemleak=off"