Adding uds-c library to handle obs2 diagnostic

Change-Id: I79c7a622f4993af9f0b8ab770991a9c74c3380ee
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

diff --git a/.gitmodules b/.gitmodules
index 76992e0..c3bc7fa 100644 (file)
--- a/.gitmodules
+++ b/.gitmodules
@@ -4,3 +4,6 @@
 [submodule "libs/nanopb"]
        path = libs/nanopb
        url = git@github.com:nanopb/nanopb.git
+[submodule "uds-c"]
+       path = libs/uds-c
+       url = git@github.com:openxc/uds-c.git

diff --git a/obd2.cpp b/obd2.cpp
new file mode 100644 (file)
index 0000000..799f23d
--- /dev/null
+++ b/obd2.cpp
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ *  A representation of an OBD-II PID.
+ *
+ * pid - The 1 byte PID.
+ * name - A human readable name to use for this PID when published.
+ * frequency - The frequency to request this PID if supported by the vehicle
+ *      when automatic, recurring OBD-II requests are enabled.
+ */
+
+/*
+ * Will scan for supported Obd2 pids
+ */
+Obd2Handler::Obd2Handler() {
+
+}
+
+Obd2Handler::isObd2Request(DiagnosticRequest* request) {
+    return request->mode == 0x1 && request->has_pid && request->pid < 0xff;
+}
+
+Obd2Handler::decodeObd2Response(obd2response responce)
\ No newline at end of file

diff --git a/obd2.h b/obd2.h
index 3f66862..da9331b 100644 (file)
--- a/obd2.h
+++ b/obd2.h
@@ -59,31 +59,6 @@ typedef struct _Obd2Pid {
     int frequency;
 } Obd2Pid;
 
-/*
- * Pre-defined OBD-II PIDs to query for if supported by the vehicle.
- */
-const Obd2Pid OBD2_PIDS[] = {
-    { pid: 0x4, name: "obd2.engine.load", min:0, max: 100, unit: POURCENT, frequency: 5 },
-    { pid: 0x5, name: "obd2.engine.coolant.temperature", min: -40, max: 215, unit: DEGREES_CELSIUS, frequency: 1 },
-    { pid: 0xa, name: "obd2.fuel.pressure", min: 0, max: 765, unit: KPA, frequency: 1 },
-    { pid: 0xb, name: "obd2.intake.manifold.pressure", min: 0, max: 255, unit: KPA, frequency: 1 },
-    { pid: 0xc, name: "obd2.engine.speed", min: 0, max: 16383, unit: RPM, frequency: 5 },
-    { pid: 0xd, name: "obd2.vehicle.speed", min: 0, max: 255, unit: KM_H, frequency: 5 },
-    { pid: 0xf, name: "obd2.intake.air.temperature", min: -40, max:215, unit: DEGREES_CELSIUS, frequency: 1 },
-    { pid: 0x10, name: "obd2.mass.airflow", min: 0, max: 655, unit: GRAMS_SEC, frequency: 5 },
-    { pid: 0x11, name: "obd2.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 5 },
-    { pid: 0x1f, name: "obd2.running.time", min: 0, max: 65535, unit: SECONDS, frequency: 1 },
-    { pid: 0x2d, name: "obd2.EGR.error", min: -100, max: 99, unit: POURCENT, frequency: 0 },
-    { pid: 0x2f, name: "obd2.fuel.level", min: 0, max: 100, unit: POURCENT, frequency: 1 },
-    { pid: 0x33, name: "obd2.barometric.pressure", min: 0, max: 255, unit: KPA, frequency: 1 },
-    { pid: 0x4c, name: "obd2.commanded.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 1 },
-    { pid: 0x52, name: "obd2.ethanol.fuel.percentage", min: 0, max: 100, unit: POURCENT, frequency: 1 },
-    { pid: 0x5a, name: "obd2.accelerator.pedal.position", min: 0, max: 100, unit: POURCENT, frequency: 5 },
-    { pid: 0x5b, name: "obd2.hybrid.battery-pack.remaining.life", min: 0, max: 100, unit: POURCENT, frequency: 5 },
-    { pid: 0x5c, name: "obd2.engine.oil.temperature",min: -40, max: 210, unit: DEGREES_CELSIUS, frequency: 1 },
-    { pid: 0x63, name: "obd2.engine.torque", min: 0, max: 65535, unit: NM, frequency: 1 },
-};
-
 /*
     { pid: 0x4, name: "engine.load", frequency: 5 },
     { pid: 0x5, name: "engine.coolant.temperature", frequency: 1 },
@@ -104,3 +79,60 @@ const Obd2Pid OBD2_PIDS[] = {
     { pid: 0x63, name: "engine.torque", frequency: 1 },
 };
  */
+
+/* Public: Check if a request is an OBD-II PID request.
+ *
+ * Returns true if the request is a mode 1  request and it has a 1 byte PID.
+ */
+bool isObd2Request(DiagnosticRequest* request);
+
+/* Public: Decode the payload of an OBD-II PID.
+ *
+ * This function matches the type signature for a DiagnosticResponseDecoder, so
+ * it can be used as the decoder for a DiagnosticRequest. It returns the decoded
+ * value of the PID, using the standard formulas (see
+ * http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01).
+ */
+float handleObd2Pid(const DiagnosticResponse* response, float parsedPayload);
+
+/*
+ * Object to handle obd2 session with pre-scan of supported pid
+ * then request them regularly
+ */
+class Obd2Handler_c {
+    private:
+        /*
+        * Pre-defined OBD-II PIDs to query for if supported by the vehicle.
+        */
+        const Obd2Pid OBD2_PIDS[] = {
+            { pid: 0x4, name: "obd2.engine.load", min:0, max: 100, unit: POURCENT, frequency: 5 },
+            { pid: 0x5, name: "obd2.engine.coolant.temperature", min: -40, max: 215, unit: DEGREES_CELSIUS, frequency: 1 },
+            { pid: 0xa, name: "obd2.fuel.pressure", min: 0, max: 765, unit: KPA, frequency: 1 },
+            { pid: 0xb, name: "obd2.intake.manifold.pressure", min: 0, max: 255, unit: KPA, frequency: 1 },
+            { pid: 0xc, name: "obd2.engine.speed", min: 0, max: 16383, unit: RPM, frequency: 5 },
+            { pid: 0xd, name: "obd2.vehicle.speed", min: 0, max: 255, unit: KM_H, frequency: 5 },
+            { pid: 0xf, name: "obd2.intake.air.temperature", min: -40, max:215, unit: DEGREES_CELSIUS, frequency: 1 },
+            { pid: 0x10, name: "obd2.mass.airflow", min: 0, max: 655, unit: GRAMS_SEC, frequency: 5 },
+            { pid: 0x11, name: "obd2.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 5 },
+            { pid: 0x1f, name: "obd2.running.time", min: 0, max: 65535, unit: SECONDS, frequency: 1 },
+            { pid: 0x2d, name: "obd2.EGR.error", min: -100, max: 99, unit: POURCENT, frequency: 0 },
+            { pid: 0x2f, name: "obd2.fuel.level", min: 0, max: 100, unit: POURCENT, frequency: 1 },
+            { pid: 0x33, name: "obd2.barometric.pressure", min: 0, max: 255, unit: KPA, frequency: 1 },
+            { pid: 0x4c, name: "obd2.commanded.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 1 },
+            { pid: 0x52, name: "obd2.ethanol.fuel.percentage", min: 0, max: 100, unit: POURCENT, frequency: 1 },
+            { pid: 0x5a, name: "obd2.accelerator.pedal.position", min: 0, max: 100, unit: POURCENT, frequency: 5 },
+            { pid: 0x5b, name: "obd2.hybrid.battery-pack.remaining.life", min: 0, max: 100, unit: POURCENT, frequency: 5 },
+            { pid: 0x5c, name: "obd2.engine.oil.temperature",min: -40, max: 210, unit: DEGREES_CELSIUS, frequency: 1 },
+            { pid: 0x63, name: "obd2.engine.torque", min: 0, max: 65535, unit: NM, frequency: 1 },
+        };
+
+        /*
+         * Will be populated with constructor
+         */
+        Obd2Pid supported_pids[];
+
+        public:
+            Obd2Handler_c();
+            
+            bool isObd2Request(request);
+}
\ No newline at end of file