Change the filename and also add note wrt un-accelerated gfx vs. local build w/ proprietary drivers.
Bug-AGL: SPEC-4006
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I3da37c3aee9a06aa3cd708f1404ff45334153c09
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/documentation/+/26502
### 3. R-Car H3SK (H3ULCB board)
### 3. R-Car H3SK (H3ULCB board)
-**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required.
+**NOTE :** The prebuilt image does support graphics only in **non-accelerated** mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required.
1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/).
- 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz).
+ 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz).
3. Extract the image into the boot device :
```sh
$ lsblk
$ sudo umount <boot_device_name>
3. Extract the image into the boot device :
```sh
$ lsblk
$ sudo umount <boot_device_name>
- $ xzcat agl-image-ivi-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M
+ $ xzcat agl-demo-platform-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M