Update README

Update top-level README to match the change to a "agl-refhw-h3"
feature in meta-agl that was integrated for Kooky Koi, and to
remove the note about HDMI issues, as they have been resolved.

Bug-AGL: SPEC-3708

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ic3e398abd47b0a79c8f0cb5847ebca2018fb924c

diff --git a/README b/README
index aa8e63d..38837ce 100644 (file)
--- a/README
+++ b/README
@@ -16,7 +16,7 @@ This layer depends on:
   branch: dunfell
 
   URI: https://github.com/renesas-rcar/meta-renesas
   branch: dunfell
 
   URI: https://github.com/renesas-rcar/meta-renesas

-  branch: dunfell-dev-4.14
+  branch: dunfell-Yocto-v4.1.0

 
 
 Build Instructions
 
 
 Build Instructions


@@ -44,16 +44,17 @@ II. Build for Reference Hardware
 You should follow the instructions in the "Building for Supported Renesas Boards"
 section on the AGL developer site to build images for the reference hardware.
 
 You should follow the instructions in the "Building for Supported Renesas Boards"
 section on the AGL developer site to build images for the reference hardware.
 

-Use the "h3ulcb" machine when configuring, e.g.:
+Use the "h3ulcb" machine and "agl-refhw-h3" feature when configuring, e.g.:

 
        $ cd $AGL_TOP
        $ source meta-agl/scripts/aglsetup.sh -m h3uclb -b build \
 
        $ cd $AGL_TOP
        $ source meta-agl/scripts/aglsetup.sh -m h3uclb -b build \

-         agl-devel agl-demo agl-localdev
+         agl-refhw-h3 agl-demo agl-devel

 
 

-This works as the AGL reference hardware support has been integrated with the
-"h3ulcb" (and "h3ulcb-nogfx") machine templates in the AGL UCB tree.  In the
-resulting build, the image can be used on the reference hardware by using the
-DTB file "r8a7795-agl-refhw.dtb".  In the reference hardware u-boot settings,
+This works as the AGL reference hardware support activated by the "agl-refhw-h3"
+feature integrates on top of the "h3ulcb" (or "h3ulcb-nogfx") machine support in
+the AGL UCB tree.  Note that it has not been tested with the "h3ulcb-kf" machine.
+In the resulting build, the image can be used on the reference hardware by using
+the DTB file "r8a7795-agl-refhw.dtb".  In the reference hardware u-boot settings,

 this can be done with the following (in case of booting from the Micro SD card
 in SD#0):
 
 this can be done with the following (in case of booting from the Micro SD card
 in SD#0):
 


@@ -81,5 +82,3 @@ Please refer to meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for details.
 IV. Notes
 =========
 1.  SD#1 is not supported.
 IV. Notes
 =========
 1.  SD#1 is not supported.

-2.  There are suspicious HDMI0/1 interrupts detected and disabled forcibly by
-    the kernel during boot. The reason is under investigation.