X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=templates%2Fbase%2Flocal.conf.sample;h=2e0bb41e6465e4db0430308f1bce430407f8b018;hb=8db438e38e573ac00da14197a905d86b43afea9b;hp=72c16b25de29bb2bf5bafe7b72293d0d8338960e;hpb=24c89f22961bab9a995ab9c18881a3109a1c8109;p=AGL%2Fmeta-agl.git diff --git a/templates/base/local.conf.sample b/templates/base/local.conf.sample index 72c16b25d..2e0bb41e6 100644 --- a/templates/base/local.conf.sample +++ b/templates/base/local.conf.sample @@ -2,11 +2,11 @@ # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended +# be set in this file. More adventurous users can look at local.conf.extended # which contains other examples of configuration which can be placed in this file # but new users likely won't need any of them initially. # -# Lines starting with the '#' character are commented out and in some cases the +# Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling # the option is a question of removing the # character and making any change to the # variable as required. @@ -20,6 +20,7 @@ #MACHINE ?= "qemuarm" #MACHINE ?= "qemuarm64" #MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" #MACHINE ?= "qemuppc" #MACHINE ?= "qemux86" #MACHINE ?= "qemux86-64" @@ -27,14 +28,14 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: -MACHINE ??= "qemux86" +# This sets the default machine to be qemux86-64 if no other machine is selected: +MACHINE ??= "qemux86-64" # # Where to place downloads @@ -95,8 +96,8 @@ DISTRO ?= "poky" # # Package Management configuration # -# This variable lists which packaging formats to enable. Multiple package backends -# can be enabled at once and the first item listed in the variable will be used +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used # to generate the root filesystems. # Options are: # - 'package_deb' for debian style deb files @@ -107,10 +108,10 @@ DISTRO ?= "poky" PACKAGE_CLASSES ?= "package_rpm" # -# SDK/ADT target architecture +# SDK target architecture # -# This variable specifies the architecture to build SDK/ADT items for and means -# you can build the SDK packages for architectures other than the machine you are +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). # Supported values are i686 and x86_64 #SDKMACHINE ?= "i686" @@ -118,11 +119,13 @@ PACKAGE_CLASSES ?= "package_rpm" # # Extra image configuration defaults # -# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated # images. Some of these options are added to certain image types automatically. The # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -130,44 +133,43 @@ PACKAGE_CLASSES ?= "package_rpm" # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) # "tools-debug" - add debugging tools (gdb, strace) # "eclipse-debug" - add Eclipse remote debugging support -# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) # "debug-tweaks" - make an image suitable for development # e.g. ssh root access has a blank password # There are other application targets that can be used here too, see # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. # We default to enabling the debugging tweaks. -EXTRA_IMAGE_FEATURES = "debug-tweaks" +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # # Additional image features # # The following is a list of additional classes to use when building images which -# enable extra features. Some available options which can be included in this variable +# enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics # - 'image-mklibs' to reduce shared library files size for an image # - 'image-prelink' in order to prelink the filesystem image -# - 'image-swab' to perform host system intrusion detection # NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink # NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -# NOTE: image-prelink is currently broken due to problems with the prelinker. It is advised -# that you do NOT run the prelinker at this time. -USER_CLASSES ?= "buildstats image-mklibs" +USER_CLASSES ?= "buildstats image-mklibs image-prelink" # # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # -# Under certain circumstances the system may need input from you and to do this it -# can launch an interactive shell. It needs to do this since the build is +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is # multithreaded and needs to be able to handle the case where more than one parallel # process may require the user's attention. The default is iterate over the available # terminal types to find one that works. @@ -192,7 +194,7 @@ PATCHRESOLVE = "noop" # files and damages the build in ways which may not be easily recoverable. # It's necesary to monitor /tmp, if there is no space left the build will fail # with very exotic errors. -BB_DISKMON_DIRS = "\ +BB_DISKMON_DIRS ??= "\ STOPTASKS,${TMPDIR},1G,100K \ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ @@ -205,13 +207,13 @@ BB_DISKMON_DIRS = "\ # # Shared-state files from other locations # -# As mentioned above, shared state files are prebuilt cache data objects which can +# As mentioned above, shared state files are prebuilt cache data objects which can # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # # This can be a filesystem directory, or a remote url such as http or ftp. These -# would contain the sstate-cache results from previous builds (possibly from other -# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH # at the end as shown in the examples below. This will be substituted with the @@ -220,18 +222,45 @@ BB_DISKMON_DIRS = "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # -# By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will -# be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" -PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +# By default native qemu will build with a builtin VNC server where graphical output can be +# seen. The line below enables the SDL UI frontend too. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" +# By default libsdl2-native will be built, if you want to use your host's libSDL instead of +# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +#ASSUME_PROVIDED += "libsdl2-native" + +# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds +# a handy set of menus for controlling the emulator. +#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+" +# +# Hash Equivalence +# +# Enable support for automatically running a local hash equivalence server and +# instruct bitbake to use a hash equivalence aware signature generator. Hash +# equivalence improves reuse of sstate by detecting when a given sstate +# artifact can be reused as equivalent, even if the current task hash doesn't +# match the one that generated the artifact. +# +# A shared hash equivalent server can be set with ":" format +# +#BB_HASHSERVE = "auto" +#BB_SIGNATURE_HANDLER = "OEEquivHash" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if