X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=scripts%2Fmkefi-agl.sh;h=c44ecedde53e757c794ee98a593dc50197fc4178;hb=e2bee9a16884172b2c92a5d86c1f19888611407e;hp=43a0c3e7fa2c093822e4454243baf1d0a58ff2f1;hpb=383aa265471628c778b1caa1a857a4469227eca8;p=AGL%2Fmeta-agl.git

diff --git a/scripts/mkefi-agl.sh b/scripts/mkefi-agl.sh
index 43a0c3e7f..c44ecedde 100755
--- a/scripts/mkefi-agl.sh
+++ b/scripts/mkefi-agl.sh
@@ -64,7 +64,7 @@ cleanup() {
 	if [ -d "$TMPDIR" ]; then
 		rm -rf "$TMPDIR" || error "Failed to remove $TMPDIR"
 	fi
-        [ -f "$TMP_DIR/TMP-AGL-wic-image.wic" ] || rm -f $TMP_DIR/TMP-AGL-wic-image.wic
+        [ -f "$TMP_DIR/TMP-AGL-wic-image.wic" ] && rm -f $TMP_DIR/TMP-AGL-wic-image.wic
 }
 
 trap 'die "Signal Received, Aborting..."' HUP INT TERM
@@ -307,14 +307,14 @@ ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
 
 # MMC devices use a partition prefix character 'p'
 PART_PREFIX=""
-if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
+if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/nvme0n}" = "${DEVICE}" ] || [ ! "${DEVICE#/dev/loop}" = "${DEVICE}" ]; then
 	PART_PREFIX="p"
 fi
 BOOTFS=$DEVICE${PART_PREFIX}1
 ROOTFS=$DEVICE${PART_PREFIX}2
 
 TARGET_PART_PREFIX=""
-if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ]; then
+if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ] || [ ! "${TARGET_DEVICE#/dev/nvme0n}" = "${TARGET_DEVICE}" ]; then
 	TARGET_PART_PREFIX="p"
 fi
 TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
@@ -352,6 +352,7 @@ ROOTFS_DISKID=$(fdisk -l "$DEVICE" | grep -e "Disk identifier" | sed -n 's/^.*Di
 if [ $ROOTFS_DISKID = "" ]; then
     die "Failed to read DISKID"
 fi
+BOOTFS_PARTUUID="$ROOTFS_DISKID-01"
 ROOTFS_PARTUUID="$ROOTFS_DISKID-02"
 debug "PARTUUID for ROOTFS is $ROOTFS_PARTUUID"
 
@@ -415,10 +416,14 @@ if [ -f $HDDIMG_MNT/vmlinuz ]; then
    debug "kernel is vmlinuz"
 fi
 if [ -f $HDDIMG_MNT/bzimage ]; then
-   cp $HDDIMG_MNT/bzimage $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy vmlinuz"
+   cp $HDDIMG_MNT/bzimage $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy bzimage"
    KERNEL_TYPE="BZIMAGE"
    debug "kernel is bzimage"
 fi
+if [ -f $HDDIMG_MNT/microcode.cpio ]; then
+   cp $HDDIMG_MNT/microcode.cpio $BOOTFS_MNT 1>&3 2>&1 || die "Failed to copy microcode.cpio"
+   debug "microcode.cpio copied"
+fi
 [ -z $KERNEL_TYPE ] && die "Linux kernel type in $HDDIMG is unsupported"
 
 if [ -f $HDDIMG_MNT/initrd ]
@@ -496,6 +501,8 @@ else
 fi
 debug "removing any swap entry in /etc/fstab"
 sed --in-place '/swap/d' $ROOTFS_MNT/etc/fstab 
+debug "fixing PARTUUID for /boot"
+sed --in-place -e "s#PARTUUID=[0-9a-z-]\+\t/boot#${BOOTFS_PARTUUID}\t/boot#" $ROOTFS_MNT/etc/fstab
 
 printf "flushing data on removable device. May take a while ... "
 sync --file-system $ROOTFS_MNT