X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=pb.h;h=5edd6483a29fc8d3796bc51ff28a0f191636eb7d;hb=be0b9e047a007685aa10a268f9bf856e9a52ef58;hp=3faa67b2675273458e10066391344eae390bf184;hpb=879860be196712990b1fb41cecd5a25229151e56;p=apps%2Fagl-service-can-low-level.git diff --git a/pb.h b/pb.h index 3faa67b2..5edd6483 100644 --- a/pb.h +++ b/pb.h @@ -2,14 +2,17 @@ * stuff. For the high-level interface, see pb_encode.h and pb_decode.h. */ -#ifndef _PB_H_ -#define _PB_H_ +#ifndef PB_H_INCLUDED +#define PB_H_INCLUDED /***************************************************************** * Nanopb compilation time options. You can change these here by * * uncommenting the lines, or on the compiler command line. * *****************************************************************/ +/* Enable support for dynamically allocated fields */ +/* #define PB_ENABLE_MALLOC 1 */ + /* Define this if your CPU architecture is big endian, i.e. it * stores the most-significant byte first. */ /* #define __BIG_ENDIAN__ 1 */ @@ -43,7 +46,7 @@ /* Version of the nanopb library. Just in case you want to check it in * your own program. */ -#define NANOPB_VERSION nanopb-0.2.6-dev +#define NANOPB_VERSION nanopb-0.3.0-dev /* Include all the system headers needed by nanopb. You will need the * definitions of the following: @@ -63,6 +66,10 @@ #include #include #include + +#ifdef PB_ENABLE_MALLOC +#include +#endif #endif /* Macro for defining packed structures (compiler dependent). @@ -73,8 +80,8 @@ # define PB_PACKED_STRUCT_START # define PB_PACKED_STRUCT_END # define pb_packed __attribute__((packed)) -#elif defined(__ICCARM__) - /* For IAR ARM compiler */ +#elif defined(__ICCARM__) || defined(__CC_ARM) + /* For IAR ARM and Keil MDK-ARM compilers */ # define PB_PACKED_STRUCT_START _Pragma("pack(push, 1)") # define PB_PACKED_STRUCT_END _Pragma("pack(pop)") # define pb_packed @@ -91,23 +98,27 @@ #endif /* Handly macro for suppressing unreferenced-parameter compiler warnings. */ -#ifndef UNUSED -#define UNUSED(x) (void)(x) +#ifndef PB_UNUSED +#define PB_UNUSED(x) (void)(x) #endif /* Compile-time assertion, used for checking compatible compilation options. - * If this does not work properly on your compiler, use #define STATIC_ASSERT - * to disable it. + * If this does not work properly on your compiler, use + * #define PB_NO_STATIC_ASSERT to disable it. * * But before doing that, check carefully the error message / place where it * comes from to see if the error has a real cause. Unfortunately the error * message is not always very clear to read, but you can see the reason better - * in the place where the STATIC_ASSERT macro was called. + * in the place where the PB_STATIC_ASSERT macro was called. */ -#ifndef STATIC_ASSERT -#define STATIC_ASSERT(COND,MSG) typedef char STATIC_ASSERT_MSG(MSG, __LINE__, __COUNTER__)[(COND)?1:-1]; -#define STATIC_ASSERT_MSG(MSG, LINE, COUNTER) STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) -#define STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) static_assertion_##MSG##LINE##COUNTER +#ifndef PB_NO_STATIC_ASSERT +#ifndef PB_STATIC_ASSERT +#define PB_STATIC_ASSERT(COND,MSG) typedef char PB_STATIC_ASSERT_MSG(MSG, __LINE__, __COUNTER__)[(COND)?1:-1]; +#define PB_STATIC_ASSERT_MSG(MSG, LINE, COUNTER) PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) +#define PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) pb_static_assertion_##MSG##LINE##COUNTER +#endif +#else +#define PB_STATIC_ASSERT(COND,MSG) #endif /* Number of required fields to keep track of. */ @@ -180,12 +191,15 @@ typedef uint8_t pb_type_t; * and array counts. */ #if defined(PB_FIELD_32BIT) +#define PB_SIZE_MAX ((uint32_t)-1) typedef uint32_t pb_size_t; typedef int32_t pb_ssize_t; #elif defined(PB_FIELD_16BIT) +#define PB_SIZE_MAX ((uint16_t)-1) typedef uint16_t pb_size_t; typedef int16_t pb_ssize_t; #else +#define PB_SIZE_MAX ((uint8_t)-1) typedef uint8_t pb_size_t; typedef int8_t pb_ssize_t; #endif @@ -199,8 +213,8 @@ typedef uint8_t pb_type_t; * PB_FIELD_32BIT. */ PB_PACKED_STRUCT_START -typedef struct _pb_field_t pb_field_t; -struct _pb_field_t { +typedef struct pb_field_s pb_field_t; +struct pb_field_s { pb_size_t tag; pb_type_t type; pb_size_t data_offset; /* Offset of field data, relative to previous field. */ @@ -221,33 +235,27 @@ PB_PACKED_STRUCT_END * If you get errors here, it probably means that your stdint.h is not * correct for your platform. */ -STATIC_ASSERT(sizeof(int8_t) == 1, INT8_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(uint8_t) == 1, UINT8_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(int16_t) == 2, INT16_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(uint16_t) == 2, UINT16_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(int32_t) == 4, INT32_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(uint32_t) == 4, UINT32_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(int64_t) == 8, INT64_T_WRONG_SIZE) -STATIC_ASSERT(sizeof(uint64_t) == 8, UINT64_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(int8_t) == 1, INT8_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(uint8_t) == 1, UINT8_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(int16_t) == 2, INT16_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(uint16_t) == 2, UINT16_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(int32_t) == 4, INT32_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(uint32_t) == 4, UINT32_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(int64_t) == 8, INT64_T_WRONG_SIZE) +PB_STATIC_ASSERT(sizeof(uint64_t) == 8, UINT64_T_WRONG_SIZE) /* This structure is used for 'bytes' arrays. * It has the number of bytes in the beginning, and after that an array. * Note that actual structs used will have a different length of bytes array. */ -struct _pb_bytes_array_t { - size_t size; - uint8_t bytes[1]; -}; -typedef struct _pb_bytes_array_t pb_bytes_array_t; +#define PB_BYTES_ARRAY_T(n) struct { pb_size_t size; uint8_t bytes[n]; } +#define PB_BYTES_ARRAY_T_ALLOCSIZE(n) ((size_t)n + offsetof(pb_bytes_array_t, bytes)) -/* Same, except for pointer-type fields. There is no need to variable struct - * length in this case. - */ -struct _pb_bytes_ptr_t { - size_t size; - uint8_t *bytes; +struct pb_bytes_array_s { + pb_size_t size; + uint8_t bytes[1]; }; -typedef struct _pb_bytes_ptr_t pb_bytes_ptr_t; +typedef struct pb_bytes_array_s pb_bytes_array_t; /* This structure is used for giving the callback function. * It is stored in the message structure and filled in by the method that @@ -267,10 +275,10 @@ typedef struct _pb_bytes_ptr_t pb_bytes_ptr_t; * * The callback can be null if you want to skip a field. */ -typedef struct _pb_istream_t pb_istream_t; -typedef struct _pb_ostream_t pb_ostream_t; -typedef struct _pb_callback_t pb_callback_t; -struct _pb_callback_t { +typedef struct pb_istream_s pb_istream_t; +typedef struct pb_ostream_s pb_ostream_t; +typedef struct pb_callback_s pb_callback_t; +struct pb_callback_s { #ifdef PB_OLD_CALLBACK_STYLE /* Deprecated since nanopb-0.2.1 */ union { @@ -303,9 +311,9 @@ typedef enum { * if you want to catch all unknown fields, you can also create a custom * pb_extension_type_t with your own callback. */ -typedef struct _pb_extension_type_t pb_extension_type_t; -typedef struct _pb_extension_t pb_extension_t; -struct _pb_extension_type_t { +typedef struct pb_extension_type_s pb_extension_type_t; +typedef struct pb_extension_s pb_extension_t; +struct pb_extension_type_s { /* Called for each unknown field in the message. * If you handle the field, read off all of its data and return true. * If you do not handle the field, do not read anything and return true. @@ -327,7 +335,7 @@ struct _pb_extension_type_t { const void *arg; }; -struct _pb_extension_t { +struct pb_extension_s { /* Type describing the extension field. Usually you'll initialize * this to a pointer to the automatically generated structure. */ const pb_extension_type_t *type; @@ -340,8 +348,23 @@ struct _pb_extension_t { * If this extension does not match a field, the next handler is * automatically called. */ pb_extension_t *next; + + /* The decoder sets this to true if the extension was found. + * Ignored for encoding. */ + bool found; }; +/* Memory allocation functions to use. You can define pb_realloc and + * pb_free to custom functions if you want. */ +#ifdef PB_ENABLE_MALLOC +# ifndef pb_realloc +# define pb_realloc(ptr, size) realloc(ptr, size) +# endif +# ifndef pb_free +# define pb_free(ptr) free(ptr) +# endif +#endif + /* These macros are used to declare pb_field_t's in the constant array. */ /* Size of a structure member, in bytes. */ #define pb_membersize(st, m) (sizeof ((st*)0)->m) @@ -484,7 +507,11 @@ struct _pb_extension_t { * messages if not used. */ #ifdef PB_NO_ERRMSG -#define PB_RETURN_ERROR(stream,msg) return false +#define PB_RETURN_ERROR(stream,msg) \ + do {\ + PB_UNUSED(stream); \ + return false; \ + } while(0) #define PB_GET_ERROR(stream) "(errmsg disabled)" #else #define PB_RETURN_ERROR(stream,msg) \