X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=meta-netboot%2FREADME;h=b571186ba290f5122db049c688b86e3699e04f9c;hb=4e09f80c89189b60293c70922b121313d59a0699;hp=c1bb6a164c2e66dbb8413451c5d5283565789d2a;hpb=b0cb0935aef4ced9c82d7972ed61f636e9036055;p=AGL%2Fmeta-agl.git

diff --git a/meta-netboot/README b/meta-netboot/README
index c1bb6a164..b571186ba 100644
--- a/meta-netboot/README
+++ b/meta-netboot/README
@@ -40,29 +40,8 @@ On the server side (assuming that the build dir is stored in $BUILD) we can run:
 Target side
 -----------
 
-On the target board, a specific setup should also be done. For example, for Renesas Porter board, the following U-boot environment could be used (adjust IP addresses !):
-
-------------------------------------------------------------------
-setenv 'bootkfile' 'uImage+dtb'
-setenv 'bootkaddr' '0x40007fc0'
-setenv 'bootifile' 'initramfs-netboot-image-porter.ext4.gz.u-boot'
-setenv 'bootiaddr' '0x50000000'
-setenv 'ipaddr' '<board_IP>'
-setenv 'serverip' '<server_IP>'
-
-setenv 'bootargs_console' 'console=ttySC6,38400 ignore_loglevel'
-setenv 'bootargs_video' 'vmalloc=384M video=HDMI-A-1:1280x960-32@60'
-setenv 'bootargs_extra' 'rw rootfstype=ext4 rootwait rootdelay=2'
-setenv 'bootargs_root' 'root=/dev/ram0 ramdisk_size=16384 ip=dhcp'
-setenv 'bootkload_net' 'tftp ${bootkaddr} porter/${bootkfile}'
-setenv 'bootiload_net' 'tftp ${bootiaddr} porter/${bootifile}'
-setenv 'bootcmd' 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root} ${bootargs_extra} nbd.server=${serverip}; run bootkload_net; run bootiload_net; bootm ${bootkaddr} ${bootiaddr}'
-
-saveenv # optional: saves env in flash
-run bootcmd # boots the board, executed automatically after power up
-------------------------------------------------------------------
-
-About Renesas Gen3 board, u-boot is updated and environment is more like :
+On the target board, a specific setup should also be done.\
+For Renesas Gen3 board, u-boot is updated and environment is more like :
 
 ------------------------------------------------------------------
 setenv bootargs_console 'console=ttySC0,115200 ignore_loglevel'