X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=meta-agl-bsp%2Fmeta-raspberrypi%2Frecipes-kernel%2Flinux%2Flinux-raspberrypi_%25.bbappend;h=ffbf791e8dc1557ee08784550a86032e7324640a;hb=8cf8d33912f6f7944f813e2191debf546be01b3b;hp=855a86257cad0b4a540cb916e254e02f538da865;hpb=d7489cff0cbc5937951759c3d8f30da6a47771f4;p=AGL%2Fmeta-agl.git

diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
index 855a86257..ffbf791e8 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
@@ -1,17 +1,29 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
 
 require recipes-kernel/linux/linux-agl.inc
-require recipes-kernel/linux/linux-agl-4.9.inc
+require recipes-kernel/linux/linux-agl-4.14.inc
+
+# ENABLE DSI
+# ported from https://github.com/k-quigley/linux
+SRC_URI_append = " \
+    file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \
+    file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \
+    file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \
+    file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \
+"
 
+# NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated
+#       to newer than 4.14.104 to avoid lttng-modules failing to build.
 SRC_URI_append = "\
-    ${@base_conditional('USE_FAYTECH_MONITOR', '1', 'file://0002-faytech-fix-rpi.patch', '', d)} \
+    ${@oe.utils.conditional('USE_FAYTECH_MONITOR', '1', 'file://0002-faytech-fix-rpi.patch', '', d)} \
+    file://disable_kprobes.cfg \
 "
 
 CMDLINE_DEBUG = ""
 CMDLINE_append = " usbhid.mousepoll=0"
 
 # Add options to allow CMA to operate
-CMDLINE_append = ' ${@base_conditional("ENABLE_CMA", "1", "coherent_pool=6M smsc95xx.turbo_mode=N", "", d)}'
+CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_CMA", "1", "coherent_pool=6M smsc95xx.turbo_mode=N", "", d)}'
 
 KERNEL_MODULE_AUTOLOAD += "snd-bcm2835"
 KERNEL_MODULE_AUTOLOAD += "hid-multitouch"
@@ -32,3 +44,7 @@ KERNEL_CONFIG_FRAGMENTS_append = " ${WORKDIR}/raspberrypi-panel.cfg"
 # Enable bt hci uart
 SRC_URI_append = " file://raspberrypi-hciuart.cfg"
 KERNEL_CONFIG_FRAGMENTS_append = " ${WORKDIR}/raspberrypi-hciuart.cfg"
+
+# ENABLE NETWORK (built-in)
+SRC_URI_append = " file://raspberrypi_network.cfg"
+KERNEL_CONFIG_FRAGMENTS_append = " ${WORKDIR}/raspberrypi_network.cfg"