X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=meta-agl-bsp%2Fconf%2Finclude%2Fagl_raspberrypi3.inc;h=8b3d80d56f81dd1bb9876c2ccf1466571a274996;hb=refs%2Fchanges%2F75%2F26075%2F2;hp=2e5f6fc013b65bc061cdeb16514e50b9206076e6;hpb=423c581aac45ffef9d432662c543314884ca4df6;p=AGL%2Fmeta-agl.git

diff --git a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
index 2e5f6fc01..8b3d80d56 100644
--- a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
+++ b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
@@ -1,16 +1,20 @@
 # Maximum memory allowed to be assigned
-GPU_MEM = "128"
+GPU_MEM = "256"
 
-ENABLE_CMA = "1"
-CMA_LWM = "16"
-CMA_HWM = "32"
+# Add CMA to the kernel arguments for SOTA
+OSTREE_KERNEL_ARGS_sota_append = " cma=256M"
 
-MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+#MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
 
-# The correct config for a Raspberry Pi 3 in 32bit mode
-UBOOT_MACHINE = "rpi_3_32b_config"
+# use u-boot always
+RPI_USE_U_BOOT = "1"
 
-KERNEL_IMAGETYPE = "uImage"
+# Use UART for serial console
+ENABLE_UART ?= "1"
+
+#RPI_KERNEL_DEVICETREE_remove_raspberrypi3 = "bcm2708-rpi-0-w.dtb"
+#RPI_KERNEL_DEVICETREE_OVERLAYS_remove_raspberrypi3 = "overlays/lirc-rpi.dtbo"
+#RPI_KERNEL_DEVICETREE_OVERLAYS_append_raspberrypi3 = " overlays/vc4-fkms-v3d.dtbo"
 
 MACHINE_FEATURES += "vc4graphics"
 
@@ -24,25 +28,3 @@ IMAGE_FEATURES_remove = "splash"
 
 # Build updatable image. Only takes effect when sota.bbclass is inherited
 DISTRO_FEATURES_append = " sota"
-
-# Add overlays for 7inch touch
-# https://github.com/k-quigley/linux/commits/rpi-4.14.y
-RPI_KERNEL_DEVICETREE_OVERLAYS_append = "\
-    overlays/rpi-backlight.dtbo \
-    overlays/rpi-7inch.dtbo \
-"
-
-
-# Create WIC images to write to SD cards.
-WKS_FILE = "sdimage-raspberrypi.wks"
-AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum"
-IMAGE_BOOT_FILES = "bcm2835-bootfiles/* \
-                 ${@make_dtb_boot_files(d)} \
-                 ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', \
-                    '${KERNEL_IMAGETYPE} u-boot.bin;${SDIMG_KERNELIMAGE} boot.scr', \
-                    '${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
-                 "
-do_image_wic[depends] += " \
-    bcm2835-bootfiles:do_deploy \
-    ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot:do_deploy', '',d)} \
-    "