X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=docs%2F2-Installation.md;h=fd6360b382962467bab24ea79d51f41c786e1466;hb=92fc459e6f2a5f22845fe3400f2f13096224a0a3;hp=0d05f9b28a8a7121281ee14600055688d609d56f;hpb=12d04c471a5127219da5a313c546ab240c866fe6;p=apps%2Fagl-service-can-low-level.git diff --git a/docs/2-Installation.md b/docs/2-Installation.md index 0d05f9b2..fd6360b3 100644 --- a/docs/2-Installation.md +++ b/docs/2-Installation.md @@ -7,7 +7,7 @@ framework version >= 0.6. It will produce a _application-generated.cpp_ file to paste in the source, _CAN-binder/low-can-binding/binding/_, directory. -* Make sure you already set up the AGL SDK using the following [SDK Quick Setup Guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). Alternatively, please refer to official guides available on [AGL Developer Site](http://docs.automotivelinux.org/docs/devguides/en/dev/#guides). +* Make sure you already set up the AGL SDK using the following [Download or Build Your SDK Installer](../../../getting_started/reference/getting-started/app-workflow-sdk.html). Alternatively, please refer to official guides available on [AGL Developer Site](../../../devguides). If you need to have the graphic stack inside your SDK, you have to prepare your environment with the **iotbzh**, or **Daring Dab** flavor using _prepare_meta_ tool. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`: @@ -18,7 +18,7 @@ prepare_meta -f iotbzh -o /xdt -l /home/devel/mirror -p /home/devel/share/propri /xdt/build/m3ulcb/agl-init-build-env ``` -* (Optionnal) An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)) if you want to connect to a real car through the OBD2 connector. +* (Optionnal) An [USB CAN adapter](https://shop.8devices.com/index.php?route=product/product&path=67&product_id=54) connected to connector through the [right cable](https://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES?qs=pLQRQR43dtrcAQQLCUAIxA%3D%3D) if you want to connect to a real car through the OBD2 connector.