X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=docs%2F2-Installation.md;h=8642d650b0b097cd9f2d23fdbf4c543ae0d86fce;hb=acae17967bde72fca1c0ee4508acba2a55125761;hp=7650c6e2d849fa69a19ae22d0f1f178daa4083ce;hpb=8c21f7efa5a87b920d3cc53d93219f03daaf7824;p=apps%2Fagl-service-can-low-level.git
diff --git a/docs/2-Installation.md b/docs/2-Installation.md
index 7650c6e2..8642d650 100644
--- a/docs/2-Installation.md
+++ b/docs/2-Installation.md
@@ -1,100 +1,54 @@
# Prerequisites
-* An AGL system installed with latest Chinook version \(>3.0.2\).
+* An AGL system installed with latest Daring Dab version with latest Application
+framework version >= 0.6.
-* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it.
+* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding.
-It will produce a _configuration-generated.cpp_ file to paste in the source, _src/_, directory.
+It will produce a _application-generated.cpp_ file to paste in the source, _CAN-binder/low-can-binding/binding/_, directory.
-* Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html).
+* Make sure you already set up the AGL SDK using the following [SDK Quick Setup Guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). Alternatively, please refer to official guides available on [AGL Developer Site](http://docs.automotivelinux.org/docs/devguides/en/dev/#guides).
-To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image:
+If you need to have the graphic stack inside your SDK, you have to prepare your environment with the **iotbzh**, or **Daring Dab** flavor using _prepare_meta_ tool. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`:
-```bash
-$ prepare_meta -f chinook-next -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t porter -e wipeconfig -e rm_work
-```
-
-* Check that you updated git submodules, executing the following commands from this repository:
+> **NOTE** These commands assume that proprietary graphic drivers for Renesas Porter board are located in _/home/devel/share/proprietary-renesas-rcar_ directory.
```bash
-$ git submodule init
-$ git submodule update
+prepare_meta -f iotbzh -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t m3ulcb -e wipeconfig -e rm_work -e cleartemp
+/xdt/build/m3ulcb/agl-init-build-env
```
-* An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)).
+* (Optionnal) An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)) if you want to connect to a real car through the OBD2 connector.
+
+
# Getting started
-## Use of CAN config generator
+## CAN config generator usage
### Build requirements
-* CMake version 3.0 or later
-* G++, Clang++ or any C++11 complient compiler.
-* Boost
- * filesystem
- * program\_options
- * system
-
-You can install any of these using your package manager. For instance, inside the iotbzh's docker image, you must enter this command :
-
-```bash
-$ sudo apt-get install cmake libboost-system-dev libboost-filesystem-dev libboost-program-options-dev
-```
-
-You may want to install `libboost-all-dev` to get all boost components even if it's not required.
+* CMake version 3.3 or later
+* G++, Clang++ or any C++11 compliant compiler.
### Compile
-> **CAUTION** It is **very important** that you do not source the SDK environment file to compile this project because some build requirements aren't installed in the AGL SDK for now.
-
```bash
-$ git clone https://github.com/iotbzh/can-config-generator.git
-Cloning into 'can-config-generator'...
-remote: Counting objects: 74, done.
-remote: Compressing objects: 100% (42/42), done.
-remote: Total 74 (delta 30), reused 67 (delta 27), pack-reused 0
-Unpacking objects: 100% (74/74), done.
-Checking connectivity... done.
-
-devel@bsp-devkit:~/projects/$ cd can-config-generator
-devel@bsp-devkit:~/projects/can-config-generator/(master)$ mkdir build
-devel@bsp-devkit:~/projects/can-config-generator/build(master)$ cmake -G "Unix Makefiles" ..
--- The C compiler identification is GNU 4.9.2
--- The CXX compiler identification is GNU 4.9.2
--- Check for working C compiler: /usr/bin/cc
--- Check for working C compiler: /usr/bin/cc -- works
--- Detecting C compiler ABI info
--- Detecting C compiler ABI info - done
--- Check for working CXX compiler: /usr/bin/c++
--- Check for working CXX compiler: /usr/bin/c++ -- works
--- Detecting CXX compiler ABI info
--- Detecting CXX compiler ABI info - done
--- Boost version: 1.55.0
--- Found the following Boost libraries:
--- program_options
--- filesystem
--- system
--- Configuring done
--- Generating done
--- Build files have been written to: /home/devel/projects/can-config-generator/build
-devel@bsp-devkit:~/projects/can-config-generator/build(master)$ make
-Scanning dependencies of target can-config-generator
-[ 12%] Building CXX object CMakeFiles/can-config-generator.dir/src/main.cpp.o
-[ 25%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/message_set.cpp.o
-[ 37%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/can_bus.cpp.o
-[ 50%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/can_message.cpp.o
-[ 62%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/command.cpp.o
-[ 75%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/diagnostic_message.cpp.o
-[ 87%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/mapping.cpp.o
-[100%] Building CXX object CMakeFiles/can-config-generator.dir/src/openxc/signal.cpp.o
-Linking CXX executable can-config-generator
-[100%] Built target can-config-generator
+source /xdt/sdk/environment-setup-aarch64-agl-linux
+export PATH=$PATH:/xdt/sdk/sysroots/x86_64-aglsdk-linux/usr/bin
+export WD=$(pwd)
+git clone --recursive https://gerrit.automotivelinux.org/gerrit/apps/low-level-can-service -b Renesas_delivery_Q2
+git clone --recursive https://gerrit.automotivelinux.org/gerrit/apps/low-level-can-generator
+cd ${WD}/low-level-can-generator
+mkdir -p build
+cd build
+cmake -G "Unix Makefiles" ..
+make
```
### Naming convention
-We choose a doted naming convention because it's a well know schema.
+We chose a doted naming convention because it's a well know schema.
It separates and organize names into hierarchy. From the left to right, you describe your names using the more common ancestor at the left then more you go to the right the more it will be accurate.
@@ -123,28 +77,40 @@ engine.torque
```
> **NOTE** It's recommended that you follow this naming convention to named your CAN signals.
-> There is only character `*` that is forbidden in names because it's used as wildcard for subscription and unsubscrition.
+>
+> There is only character `*` that is forbidden in names because it's used as wildcard for subscription and unsubscription.
+>
> This described in the below chapter.
+### Available decoder
+
+You can use some basic decoder provided by default by the binding which are:
+
+* ***decoder_t::decode_noop*** : Default decoder if not specified, return raw value from signal's bitfield.
+* ***decoder_t::decode_boolean*** : Coerces a numerical value to a boolean.
+* ***decoder_t::decode_state*** : Find and return the corresponding string state for a CAN signal's raw integer value.
+
### Generating JSON from Vector CANoe Database
-If you use Canoe to store your `gold standard` CAN signal definitions, you may be able to use the OpenXC `xml_to_json.py` script to make your JSON for you. First, export the Canoe .dbc file as XML - you can do this with Vector CANdb++. Next, create a JSON file according to the format defined above, but only define:
+> **CAUTION** This chapter has not been tested since it haven't necessary automotive tools for that.
-- CAN messages.
-- Name of CAN signals within messages and their generic_name.
-- Optionnaly name of diagnostic messages and their name.
+If you use CANoe to store your `gold standard` CAN signal definitions, you may be able to use the OpenXC `xml_to_json.py` script to make your JSON for you. First, export the Canoe .dbc file as XML - you can do this with Vector CANdb++. Next, create a JSON file according to the format defined above, but only define:
+
+* CAN messages.
+* Name of CAN signals within messages and their generic_name.
+* Optionnaly name of diagnostic messages and their name.
To install the OpenXC utilities and runs `xml_to_json.py` script:
```bash
-$ sudo pip install openxc
-$ cd /usr/local/lib/python2.7/dist-packages/openxc-0.13.0-py2.7.egg/openxc/generator
+sudo pip install openxc
+cd /usr/local/lib/python2.7/dist-packages/openxc/generator
```
Assuming the data exported from Vector is in `signals.xml` and your minimal mapping file is `mapping.json`, run the script:
```bash
-$ ./xml_to_json.py signals.xml mapping.json signals.json
+python -m openxc.utils ./xml_to_json.py signals.xml mapping.json signals.json
```
The script scans `mapping.json` to identify the CAN messages and signals that you want to use from the XML file. It pulls the neccessary details of the messages (bit position, bit size, offset, etc) and outputs the resulting subset as JSON into the output file, `signals.json`.
@@ -156,19 +122,19 @@ The resulting file together with `mapping.json` will work as input to the code g
To generate your config file you just have to run the generator using the `-m` option to specify your JSON file.
```bash
-$ can-config-generator -m ../tests/basic.json -o configuration-generated.cpp
+./can-config-generator -m ../tests/basic.json -o application-generated.cpp
```
-If you omit the `-o` option, then code is generated on the stdout.
-You also can specify a header and a footer file.
-These files must be valid C++ fragment as long as they will be inserted as is.
+If you omit the `-o` option, then code is generated on the stdout.
+You also can specify a header and a footer file.
+These files must be valid C++ fragment as long as they will be inserted as is.
Use the `-h` option to display help.
> **CAUTION:** Each `diagnostic_message` must define the same `bus` as the binding will use only one bus.
### Supported OpenXC items
-About now, compliance with OpenXC reference is in progress, can-config-generator and CAN\_signaling will implement them soon.
+About now, compliance with OpenXC reference is in progress, can-config-generator and CAN\_signaling will implement them soon.
`initializers`, `loopers`, `commands` and `handlers` nodes are ignored for now.
This generator will follow OpenXC support status of the low level CAN signaling binding.
@@ -177,56 +143,45 @@ This generator will follow OpenXC support status of the low level CAN signaling
## Compile and install the binding
-With an AGL SDK environment correctly configured and **sourced**, I suggest you to set the TARGET variable in the root CMakeLists.txt file if you have an AGL target already running in your network.
+### Build requirements
-Then you can directly build and install the binding and source directory on your target system.
+* Kernel >= 4.8
+* CMake version 3.3 or later
+* G++, Clang++ or any C++11 compliant compiler.
-Execute these commands to get your binding compile :
+### Compile
-```bash
-$ mkdir build
-$ cd build
-$ cmake ..
-$ make
-```
+Clone the binding repository, copy the generated file and updated the git submodules.
-And if you have set TARGET variable, you can install it on your AGL system :
+Execute the following commands from this repository:
```bash
-$ make install
-[ 16%] Built target bitfield
-[ 27%] Built target isotp
-[ 40%] Built target openxc
-[ 48%] Built target uds
-[ 97%] Built target low-can-binding
-[100%] Built target widget
-Install the project...
--- Install configuration: ""
-true
-{ "added": "low-can-binding@0.1" }
+cd ${WD}/low-level-can-service
+cp ${WD}/low-level-can-generator/build/application-generated.cpp ../low-can-binding/binding
```
-It's possible that you'll see the following message :
+### Installation
```bash
-Error org.freedesktop.DBus.Error.Failed: "system error"
+cd ${WD}/low-level-can-service
+mkdir build
+cd build
+cmake ..
+make
+make widget
```
-It's because installation remove the binding before installing it.
-
-If it is the first time that you make the installation then you'll have this message in place of _**true**_.
-
-To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands :
+To install it manually, you need to copy the _low-can-service.wgt_ file on your target, then from it execute the following commands :
On your host, to copy over the network :
```bash
-$ scp low-can-binding.wgt root@:~
+scp low-can-service.wgt root@:~
```
-On the target, assuming _**wgt**_ file is in the root home directory :
+On the target, assuming _**wgt**_ file is in the root home directory:
```bash
-~# afm-util install low-can-binding.wgt
-{ "added": "low-can-binding@0.1" }
+afm-util install low-can-service.wgt
+{ "added": "low-can-service@4.0" }
```