X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=doc%2Fafm-user-daemon.md;h=b21c1cd7f65c97ec8e86eb7e86042a512b4a1491;hb=5262c13a63c78107d6d7df05db31f54db8d47ac7;hp=590b51134b205716d969026a2c6bedde6861937e;hpb=f45bd5fbf8d1fe440b1855d93b387755d63ac8f0;p=src%2Fapp-framework-main.git diff --git a/doc/afm-user-daemon.md b/doc/afm-user-daemon.md index 590b511..b21c1cd 100644 --- a/doc/afm-user-daemon.md +++ b/doc/afm-user-daemon.md @@ -3,7 +3,7 @@ The afm-user-daemon =================== version: 1 - Date: 29 mai 2016 + Date: 30 mai 2016 Author: José Bollo TABLE-OF-CONTENT-HERE @@ -11,39 +11,36 @@ TABLE-OF-CONTENT-HERE Foreword -------- -This document describes what we intend to do. It may happen that our -current implementation and the content of this document differ. - -In case of differences, it is assumed that this document is right -and the implementation is wrong. +This document describes application framework user daemon fundamentals. +FCF (Fully Conform to Specification) implementation is still under development. +It may happen that current implementation somehow diverges with specifications. Introduction ------------ The daemon **afm-user-daemon** is in charge of handling -applications for one user. Its main tasks are: +applications on behalf of a user. Its main tasks are: - - enumerate the applications that the user can run - and keep the list avalable on demand + - enumerate applications that end user can run + and keep this list available on demand - - start applications for the user, set their running - environment, set their security context + - start applications on behalf of end user, set user running + environment, set user security context - - list the current runner applications + - list current runnable or running applications - stop (aka pause), continue (aka resume), terminate - the running instance of application + a running instance of a given application - - transfer requests for installation or uninstallation - of applications to the dedicated system daemon + - transfer requests for installation/uninstallation + of applications to the corresponding system daemon **afm-system-daemon** The **afm-user-daemon** takes its orders from the session instance of D-Bus. -The figure below summarizes the situation of the -**afm-user-daemon** in the system. +The figure below summarizes the situation of **afm-user-daemon** in the system. +------------------------------------------------------------+ | User | @@ -80,37 +77,39 @@ Tasks of **afm-user-daemon** ### Maintaining list of applications ### At start **afm-user-daemon** scans the directories containing -the applications and load in memory the list applications -availables to the current user. +applications and load in memory a list of avaliable applications +accessible by current user. -When **afm-system-daemon** installs or removes an application, -it sends the signal *org.AGL.afm.system.changed* on success. -If it receives that signal, **afm-user-daemon** rebuild its -list of applications. +When **afm-system-daemon** installs or removes an application. +On success it sends the signal *org.AGL.afm.system.changed*. +When receiving such a signal, **afm-user-daemon** rebuilds its +applications list. -**afm-user-daemon** provides the data that it collected about -application to its clients that either want to get that list -or to get information about one application. +**afm-user-daemon** provides the data it collects about +applications to its clients. Clients may either request the full list +of avaliable applications or a more specific information about a +given application. -### Launching applications ### +### Launching application ### -**afm-user-daemon** launchs the applications. This means -that its builds a secure environment for the application -and then start it inside that secured environment. +**afm-user-daemon** launches application. Its builds a secure +environment for the application before starting it within a +secured environment. -Applications of different kind can be launched. +Different kind of applications can be launched. This is set using a configuration file that describes -how to launch an application of a given kind for a given +how to launch an application of a given kind within a given mode. There is two launching modes: local or remote. Launching an application locally means that -the application and its binder are launcher together. +the application and its binder are launched together. -Launching application remotely means that only the -binder is launched for the application. +Launching application remotely translates in only launching +the application binder. The UI by itself has to be activated +remotely by the requested (ie: HTML5 homescreen in a browser) Once launched, running instances of application receive a runid that identify them. @@ -120,14 +119,14 @@ a runid that identify them. **afm-user-daemon** manages the list of applications that it launched. -With the good permissions, a client can get the list -of the running instances and details about a specific -running instance. It can also terminate, stop or -continue a given application. +When owning the right permissions, a client can get the list +of running instances and details about a specific +running instance. It can also terminates, stops or +continues a given application. ### Installing and uninstalling applications ### -If the client has the good permission, +If the client own the right permissions, **afm-user-daemon** delegates that task to **afm-system-daemon**. @@ -150,17 +149,16 @@ The options for launching **afm-user-daemon** are: Can be repeated. -r - --root directory - - Includes the root application directory to - the database base of applications. - - Note that the default root directory for - applications is always added. It is defined - to be /usr/share/afm/applications (may change). - - Can be repeated. + --root directory + Includes root application directory or directories when + passing multiple rootdir to + applications database. + + Note that default root directory for + applications is always added. In current version + /usr/share/afm/applications is used as default. + -m --mode (local|remote) @@ -188,34 +186,34 @@ The options for launching **afm-user-daemon** are: Prints a short help. -Configuration of the launcher +Launcher Configuration ----------------------------- It contains rules for launching applications. -When **afm-user-daemon** need to launch an application, -it looks to the mode of launch, local or remote, and the -type of the application as given by the file ***config.xml*** -of the widget. +When **afm-user-daemon** has to launch an application, +it looks for launch mode (local or remote), as well as +for the type of application describe in ***config.xml*** +widget configuration file. -This couple mode and type allows to select the rule. +This tuple mode+type allows to select the adequate rule. -The configuration file is **/etc/afm/afm-launch.conf**. +Configuration file is **/etc/afm/afm-launch.conf**. It contains sections and rules. It can also contain comments -and empty lines to improve the readability. +and empty lines to improve readability. The separators are space and tabulation, any other character -is meaning something. +should have a meaning. The format is line oriented. The new line character separate the lines. -Lines having only separators are blank lines and are skipped. -Line having the character # (sharp) as first not separator character -are comment lines and are ignored. +Lines having only separators are blank lines and ignored. +Line having character #(sharp) at first position are comment +lines and ignored. -Lines starting with a not separator character are differents -of lines starting with a separator character. +Lines not starting with a separator are different +from lines starting with a separator character. The grammar of the configuration file is defined below: @@ -244,8 +242,8 @@ The grammar of the configuration file is defined below: NCHAR: CMT | CHAR Here is a sample of configuration file for defining how -to launch an application declared of types *application/x-executable*, -*text/x-shellscript* and *text/html* in mode local: +to launch an application of types *application/x-executable*, +*text/x-shellscript* and *text/html* in local mode: mode local @@ -267,9 +265,9 @@ This shows that: ### mode local -Within this mode, the launchers have either one or two vectors -describing them. All of these vectors are treated as programs -and are executed with the system call 'execve'. +Within this mode, the launchers have either one or two description vectors. +All of those vectors are treated as programs +and are executed with 'execve' system call. The first vector is the leader vector and it defines the process group. The second vector (if any) is attached to the group @@ -280,19 +278,17 @@ defined by this first vector. Within this mode, the launchers have either one or two vectors describing them. -The first vector is treated as a program and is executed with -the system call 'execve'. +The first vector is process as a program and is executed with +system call 'execve'. The second vector (if any) defines a text that is returned -to the caller. This mechanism can be used to return the uri -to connect to for executing the application remotely. +to the caller. This mechanism can be used to return a uri +for remote UI to connect on the newly launched application. -The daemon ***afm-user-daemon*** allocates a port for the -running the application remotely. -The current implmentation of the port allocation is just -incremental. -A more reliable (cacheable and same-originable) allocation -is to be defined. +The daemon ***afm-user-daemon*** allocates a port for each +new remote application. +The current implementation port allocation is incremental. +A smarter (cacheable and discoverable) allocation should be defined. ### %substitutions @@ -310,7 +306,7 @@ Here is the list of *%substitutions*: - ***%a***: appid - This is the application Id of the launched application. + Holds application Id of launched application. Defined by the attribute **id** of the element **** of **config.xml**. @@ -319,11 +315,10 @@ Here is the list of *%substitutions*: The file within the widget directory that is the entry point. - For a HTML application, it is the relative path to the main + For HTML applications, it represents the relative path to main page (aka index.html). - Defined by the attribute **src** of the element **** - of **config.xml**. + Defined by attribute **src** of the element **** within **config.xml**. - ***%D***: datadir @@ -363,9 +358,8 @@ Here is the list of *%substitutions*: - ***%p***: plugins - Unhandled until now. - - Will be the colon separated list of plugins and plugins directory. + In the future should represent the list of plugins and plugins directory separated by ','. + Warning: not supported in current version. - ***%P***: port @@ -374,17 +368,17 @@ Here is the list of *%substitutions*: - ***%R***: readyfd - Number of the file descriptor to use for signalling - readyness of the launched process. + Number of file descriptor to use for signaling + readiness of launched process. - ***%r***: rootdir - Path of the directory containing the widget and its data. + Path of directory containing the widget and its data. - ***%S***: secret - An hexadecimal number that can be used to pair the client - with its server binder. + An hexadecimal number that can be used to initialize pairing of client + and application binder. - ***%W***: width @@ -400,27 +394,25 @@ The D-Bus interface ### Overview of the dbus interface ***afm-user-daemon*** takes its orders from the session instance -of D-Bus. The use of D-Bus is great because it allows to implement +of D-Bus. D-Bus is nice to use in this context because it allows discovery and signaling. -The dbus of the session is by default adressed by the environment +The dbus session is by default addressed by environment variable ***DBUS_SESSION_BUS_ADDRESS***. Using **systemd** -the variable *DBUS_SESSION_BUS_ADDRESS* is automatically set for +variable *DBUS_SESSION_BUS_ADDRESS* is automatically set for user sessions. -The **afm-user-daemon** is listening with the destination name -***org.AGL.afm.user*** at the object of path ***/org/AGL/afm/user*** -on the interface ***org.AGL.afm.user*** for the below detailed -members ***runnables***, ***detail***, ***start***, ***terminate***, +The **afm-user-daemon** is listening on destination name +***org.AGL.afm.user*** at object path ***/org/AGL/afm/user*** +on interface ***org.AGL.afm.user*** for following members: + ***runnables***, ***detail***, ***start***, ***terminate***, ***stop***, ***continue***, ***runners***, ***state***, ***install*** and ***uninstall***. D-Bus is mainly used for signaling and discovery. Its optimized -typed protocol is not used except for transmitting only one string -in both directions. +typed protocol is not used except for transmission of standalone strings. -The client and the service are using JSON serialisation to -exchange data. +Clients and Services are using JSON serialisation to exchange data. The D-Bus interface is defined by: @@ -433,10 +425,10 @@ The D-Bus interface is defined by: The signature of any member of the interface is ***string -> string*** for ***JSON -> JSON***. -This is the normal case. In case of error, the current implmentation -returns a dbus error that is a string. +This is the normal case. In case of error, the current implementation +returns a dbus error as a string. -Here is an example that use *dbus-send* to query data on +Here an example using *dbus-send* to query data on installed applications. dbus-send --session --print-reply \ @@ -451,8 +443,7 @@ orders to **afm-user-daemon**. This small scripts allows to send command to ***afm-user-daemon*** either interactively at shell prompt or scriptically. -The syntax is simple: it accept a command and if the command -requires it, the argument to the command. +The syntax is simple: it accept a command and when requires attached arguments. Here is the summary of ***afm-util***: @@ -563,12 +554,12 @@ an application as described above for the method **Description**: Install an application from its widget file. If an application of the same *id* and *version* exists, it is not -reinstalled except if *force=true*. +reinstalled except when *force=true*. Applications are installed in the subdirectories of the common directory -of applications. -If *root* is specified, the application is installed under the -sub-directories of the *root* defined. +reserved for applications. +If *root* is specified, the application is installed under +sub-directories of defined *root*. Note that this methods is a simple accessor to the method ***org.AGL.afm.system.install*** of ***afm-system-daemon***. @@ -576,10 +567,10 @@ Note that this methods is a simple accessor to the method After the installation and before returning to the sender, ***afm-user-daemon*** sends the signal ***org.AGL.afm.user.changed***. -**Input**: The *path* of the widget file to install and, optionaly, -a flag to *force* reinstallation, and, optionaly, a *root* directory. +**Input**: The *path* of widget file to be installed. Optionally, +a flag to *force* reinstallation and/or a *root* directory. -Either just a string being the absolute path of the widget file: +Simple form a simple string containing the absolute widget path: "/a/path/driving/to/the/widget" @@ -591,10 +582,9 @@ Or an object: "root": "/a/path/to/the/root" } -"wgt" and "root" must be absolute paths. +"wgt" and "root" MUST be absolute paths. -**output**: An object with the field "added" being the string for -the id of the added application. +**output**: An object containing field "added" to use as application ID. {"added":"appli@x.y"} @@ -605,14 +595,14 @@ the id of the added application. **Description**: Uninstall an application from its id. -Note that this methods is a simple accessor to the method -***org.AGL.afm.system.uninstall*** of ***afm-system-daemon***. +Note that this methods is a simple accessor to +***org.AGL.afm.system.uninstall*** method from ***afm-system-daemon***. After the uninstallation and before returning to the sender, ***afm-user-daemon*** sends the signal ***org.AGL.afm.user.changed***. -**Input**: the *id* of the application and, otpionaly, the path to -*root* of the application. +**Input**: the *id* of the application and, optionally, the path to +application *root*. Either a string: @@ -633,30 +623,29 @@ Or an object: **Description**: -**Input**: the *id* of the application and, optionaly, the +**Input**: the *id* of the application and, optionally, the start *mode* as below. Either just a string: "appli@x.y" -Or an object having the field "id" of type string and -optionaly a field mode: +Or an object containing field "id" of type string and +optionally a field mode: {"id":"appli@x.y","mode":"local"} -The field "mode" as a string value being either "local" or "remote". +The field "mode" is a string equal to either "local" or "remote". -**output**: The *runid* of the application launched. -The runid is an integer. +**output**: The *runid* of the application launched. *runid* is an integer. --- #### Method org.AGL.afm.user.terminate -**Description**: Terminates the application of *runid*. +**Description**: Terminates the application attached to *runid*. -**Input**: The *runid* (an integer) of the running instance to terminate. +**Input**: The *runid* (an integer) of running instance to terminate. **output**: the value 'true'. @@ -664,9 +653,9 @@ The runid is an integer. #### Method org.AGL.afm.user.stop -**Description**: Stops the application of *runid* until terminate or continue. +**Description**: Stops the application attached to *runid* until terminate or continue. -**Input**: The *runid* (an integer) of the running instance to stop. +**Input**: The *runid* (integer) of the running instance to stop. **output**: the value 'true'. @@ -674,9 +663,9 @@ The runid is an integer. #### Method org.AGL.afm.user.continue -**Description**: Continues the application of *runid* previously stopped. +**Description**: Continues the application attached to *runid* previously stopped. -**Input**: The *runid* (an integer) of the running instance to continue. +**Input**: The *runid* (integer) of the running instance to continue. **output**: the value 'true'. @@ -686,12 +675,11 @@ The runid is an integer. **Description**: Get informations about a running instance of *runid*. -**Input**: The *runid* (an integer) of the running instance inspected. +**Input**: The *runid* (integer) of the running instance inspected. -**output**: An object describing the state of the instance. It contains: -the runid (an integer), the id of the running application (a string), -the state of the application (a string being either "starting", "running" -or "stopped"). +**output**: An object describing instance state. It contains: +the runid (integer), the id of the running application (string), +the state of the application (string either: "starting", "running", "stopped"). Example of returned state: @@ -705,7 +693,7 @@ Example of returned state: #### Method org.AGL.afm.user.runners -**Description**: Get the list of the currently running instances. +**Description**: Get the list of currently running instances. **Input**: anything.