X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;f=README.md;h=7c9cc95eca29ee75909449ad88f25a9aac14a8ee;hb=refs%2Fheads%2Fmaster;hp=e44d94ce9f6bd407edcb5ee221a984adcefab9e7;hpb=c0289651b2d831f42d0c5236b1f703d1379354f8;p=AGL%2Fmeta-agl.git diff --git a/README.md b/README.md deleted file mode 100644 index e44d94ce9..000000000 --- a/README.md +++ /dev/null @@ -1,168 +0,0 @@ -meta-agl, the Yocto layer for Automotive Grade Linux Distribution -================================================================= - -This layer's purpose is ... [TBD] - -Layer Dependencies ------------------- - -URI: git://git.yoctoproject.org/poky -> branch: dizzy -> revision: 5f0d25152bac2d3798663a4ebfdd2df24060f153 - -URI: git://git.openembedded.org/meta-openembedded -> layer: meta-oe -> branch: dizzy -> revision: 853dcfa0d618dc26bd27b3a1b49494b98d6eee97 - -## The Renesas R-Car Gen2 (Porter) board depends in addition on: ## - -URI: https://gerrit.automotivelinux.org/gerrit/p/AGL/meta-renesas.git -> branch: agl-1.0-bsp-1.8.0 -> revision: 0a69b07cfca17d1435f2bc7bf779139c5fac09a3 - -Layers ------- - -There are 2 sub-layers in top-level `meta-agl`. - -`meta-agl` is a layer which contains AGL common and middleware packages. -> meta-agl/meta-agl - -`meta-agl-bsp` is a layer which contains required packages to boot AGL distribution on an emulated machine(QEMU). -> meta-agl/meta-agl-bsp - -Packagegroups -------------- - -AGL package group design: - -These are the top-level packagegroups for AGL Distribution. -> packagegroup-agl-core (basic/common packages out of oe-core) -> packagegroup-agl-ivi (middlewares for AGL IVI) - -Each package group can contain sub-package groups like these. -> packagegroup-agl-core-multimedia -> packagegroup-agl-core-connectivity -> ... -> packagegroup-agl-ivi-multimedia -> packagegroup-agl-ivi-connectivity -> ... - -The recipe for `packagegroup-agl-core-*.bb` will contain common packages between meta-agl, meta-ivi and meta-tizen. -> directory: meta-agl/meta-agl/recipes-core/packagegroups -> recipes : packagegroup-agl-core-[subsystem].bb - -The "packagegroups-agl-ivi-*" will contain AGL specific middleware packages. -> directory: meta-agl/meta-agl/recipes-ivi/packagegroups -> recipes : packagegroup-agl-ivi-[subsystem].bb - -Supported Machine ------------------ - -* QEMU (x86-64) - emulated machine: qemux86-64 -* Renesas R-Car Gen2 (R-Car M2) - machine: porter - -Supported Target of bitbake ------------------------- - -* `agl-image-ivi` The baseline image of AGL Distributions - -* `agl-image-minimal` For internal use to develop distribution (experimental) -* `agl-image-weston` For internal use to develop distribution (experimental) - -Supposed Directory Trees of Layers to build -------------------------------------------- - -* For QEMU - - ${TOPDIR}/ - meta-agl/ - meta-openembedded/ - poky/ - -* For R-Car M2 - - ${TOPDIR}/ - meta-agl/ - meta-openembedded/ - meta-renesas/ - poky/ - -Build a QEMU image ------------------- - -You can build a QEMU image using the following steps: - -1. Export TEMPLATECONF to pick up correct configuration for the build - > $ export TEMPLATECONF=/full/path/to/meta-agl/meta-agl/conf - -2. Run the following command: - > $ source poky/oe-init-build-env - -3. Build the minimal image of AGL Distribution - > $ bitbake agl-image-ivi - -4. Run the emulator - > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 - - For large screen: - > $ PATH_TO_POKY/poky/scripts/runqemu agl-image-ivi qemux86-64 bootparams="uvesafb.mode_option=1280x720-32" - -5. Some weston samples are available from weston terminal. - -Build a R-Car M2 (porter) image -------------------------------- - -### Software setup - -#### Obtain and Install Renesas Graphics Drivers - -See [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#M2_Porter_low_cost_board) and get 2 ZIP files from the link there. - -Note: You have to copy files manually because there is no shell-script -in the current meta-renesas. - -1. Unzip the two downloads into a folder. In this example a temporary directory is used. - $ cd $HOME/AGL - $ mkdir binary-tmp - $ - - After this step there should be two files in binary-tmp: - R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz - R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz - -2. Extract 2 tar.gz - tar xf R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz - tar xf R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz - -3. Copy 2 files manually - 1. Locate EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 in the graphics - driver deliverable and copy it into the BSP layer. (need rename) - cp /EVA_r8a7791_linux_sgx_binaries_gles2.tar.bz2 \ - meta-renesas/meta-rcar-gen2/recipes-graphics/gles-module/\ - gles-user-module/r8a7791_linux_sgx_binaries_gles2.tar.bz2 - - 2. Locate SGX_KM_M2.tar.bz2 in the graphics driver deliverable and copy - it into the BSP layer. - cp SGX_KM_M2.tar.bz2 \ - meta-renesas/meta-rcar-gen2/recipes-kernel/gles-module/gles-kernel-module - -#### Build from the Source code - -You can build a R-Car2 M2 (porter) image using the following steps: - -1. Export TEMPLATECONF to pick up correct configuration for the build - > $ export TEMPLATECONF=/full/path/to/meta-renesas/meta-rcar-gen2/conf - -2. Run the following command: - > $ source poky/oe-init-build-env - -3. Build the minimal image of AGL Distribution - > $ bitbake agl-image-ivi - -### Deployment (SDCARD) - -Follow the instructions [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter#Deployment_.28SDCARD.29) - -Note: Use `agl-image-ivi-porter.tar.bz2` as name of root file system archive. diff --git a/README.md b/README.md new file mode 120000 index 000000000..7c9cc95ec --- /dev/null +++ b/README.md @@ -0,0 +1 @@ +meta-agl.md \ No newline at end of file