X-Git-Url: https://gerrit.automotivelinux.org/gerrit/gitweb?a=blobdiff_plain;ds=sidebyside;f=meta-agl-bsp%2Fconf%2Finclude%2Fagl_raspberrypi3.inc;h=23a37c2daba26cf15aefd458a4e4d65b6ce537c5;hb=228b262a4b1d398ce6968c84630bab1fde31a4cf;hp=88565fd5abec9d8a0971f3f1e8a0cfd213fc2ac2;hpb=e46f5db0ed37fe912ed2f97e27280e8c681e547b;p=AGL%2Fmeta-agl.git

diff --git a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
index 88565fd5a..23a37c2da 100644
--- a/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
+++ b/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
@@ -1,31 +1,23 @@
 # Maximum memory allowed to be assigned
-GPU_MEM = "255"
+GPU_MEM = "128"
 
 ENABLE_CMA = "1"
 CMA_LWM = "16"
 CMA_HWM = "32"
 
-CORE_IMAGE_EXTRA_INSTALL += "wayland weston"
-
 MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
 
-KERNEL_IMAGETYPE = "Image"
-KERNEL_DEVICETREE_append = " overlays/vc4-kms-v3d-overlay.dtb"
-PREFERRED_VERSION_linux-raspberrypi = "4.4.%"
-PREFERRED_VERSION_mesa = "12.%"
+# The correct config for a Raspberry Pi 3 in 32bit mode
+UBOOT_MACHINE = "rpi_3_32b_config"
 
-PREFERRED_PROVIDER_virtual/egl = "mesa"
-PREFERRED_PROVIDER_virtual/libgles2 = "mesa"
-PREFERRED_PROVIDER_virtual/libgl = "mesa"
-PREFERRED_PROVIDER_virtual/mesa = "mesa"
-PREFERRED_PROVIDER_jpeg = "jpeg"
+KERNEL_IMAGETYPE = "uImage"
 
 MACHINE_FEATURES += "vc4graphics"
 
 # For libomxil
 #LICENSE_FLAGS_WHITELIST = "commercial"
 
-IMAGE_INSTALL_append = " kernel-modules linux-firmware "
+IMAGE_INSTALL_append = " kernel-modules linux-firmware-raspbian-bcm43430 linux-firmware-raspbian-bcm43455 create-combined-dtb "
 
 # Psplash causes crash on first boot on RPi
 IMAGE_FEATURES_remove = "splash"
@@ -33,3 +25,16 @@ IMAGE_FEATURES_remove = "splash"
 # Build updatable image. Only takes effect when sota.bbclass is inherited
 DISTRO_FEATURES_append = " sota"
 
+# Create WIC images to write to SD cards.
+WKS_FILE = "sdimage-raspberrypi.wks"
+AGL_EXTRA_IMAGE_FSTYPES = "wic.xz wic.bmap wic.xz.sha256sum"
+IMAGE_BOOT_FILES = "bcm2835-bootfiles/* \
+                 ${@make_dtb_boot_files(d)} \
+                 ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', \
+                    '${KERNEL_IMAGETYPE} u-boot.bin;${SDIMG_KERNELIMAGE} boot.scr', \
+                    '${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
+                 "
+do_image_wic[depends] += " \
+    bcm2835-bootfiles:do_deploy \
+    ${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot:do_deploy', '',d)} \
+    "