-/*
- * Unicens Integration Helper Component
- *
- * Copyright (C) 2017 Microchip Technology Germany II GmbH & Co. KG
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * You may also obtain this software under a propriety license from Microchip.
- * Please contact Microchip for further information.
- *
- */
+/*------------------------------------------------------------------------------------------------*/
+/* UNICENS Integration Helper Component */
+/* Copyright 2017, Microchip Technology Inc. and its subsidiaries. */
+/* */
+/* Redistribution and use in source and binary forms, with or without */
+/* modification, are permitted provided that the following conditions are met: */
+/* */
+/* 1. Redistributions of source code must retain the above copyright notice, this */
+/* list of conditions and the following disclaimer. */
+/* */
+/* 2. Redistributions in binary form must reproduce the above copyright notice, */
+/* this list of conditions and the following disclaimer in the documentation */
+/* and/or other materials provided with the distribution. */
+/* */
+/* 3. Neither the name of the copyright holder nor the names of its */
+/* contributors may be used to endorse or promote products derived from */
+/* this software without specific prior written permission. */
+/* */
+/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
+/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE */
+/* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE */
+/* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE */
+/* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL */
+/* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR */
+/* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER */
+/* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, */
+/* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE */
+/* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
+/*------------------------------------------------------------------------------------------------*/
#ifndef UCSI_H_
#define UCSI_H_
/* Public API */
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
-// Fulup interface added to support ucs2vol
-typedef const struct {
- char* name;
- int numid;
-} UCSI_channelsT;
-
-typedef void (*UCSI_VolumeServiceCB_t)(uint16_t timeout);
-UCSI_channelsT *UCSI_Vol_Init (UCSI_Data_t *pPriv, UCSI_VolumeServiceCB_t serviceCB);
-uint8_t UCSI_Vol_Set (UCSI_Data_t *pPriv, int numId, uint8_t volume);
-void UCSI_Vol_Service (UCSI_Data_t *pPriv);
-
-
/**
- * \brief Initializes Unicens Integration module.
+ * \brief Initializes UNICENS Integration module.
* \note Must be called before any other function of this component
*
* \param pPriv - External allocated memory area for this particular
bool UCSI_NewConfig(UCSI_Data_t *pPriv, UcsXmlVal_t *ucsConfig);
/**
- * \brief Offer the received control data from LLD to Unicens
+ * \brief Offer the received control data from LLD to UNICENS
* \note Call this function only from single context (not from ISR)
* \note This function can be called repeated until it return false
*
bool UCSI_ProcessRxData(UCSI_Data_t *pPriv, const uint8_t *pBuffer, uint16_t len);
/**
- * \brief Gives Unicens Integration module time to do its job
+ * \brief Gives UNICENS Integration module time to do its job
* \note Call this function only from single context (not from ISR)
*
* \param pPriv - private data section of this instance
*/
void UCSI_Timeout(UCSI_Data_t *pPriv);
+/**
+ * \brief Sends an AMS message to the control channel
+ *
+ * \note Call this function only from single context (not from ISR)
+ *
+ * \param pPriv - private data section of this instance
+ * \param msgId - The AMS message id
+ * \param targetAddress - The node / group target address
+ * \param pPayload - The AMS payload to be sent
+ * \param payloadLen - The length of the AMS payload
+ *
+ * \return true, if operation was successful. false if the message could not be sent.
+ */
+bool UCSI_SendAmsMessage(UCSI_Data_t *my, uint16_t msgId, uint16_t targetAddress, uint8_t *pPayload, uint32_t payloadLen);
+
+/**
+ * \brief Gets the queued AMS message from UNICENS stack
+ *
+ * \note Call this function only from single context (not from ISR)
+ * \note This function may be called cyclic or when UCSI_CB_OnAmsMessageReceived was raised
+ *
+ * \param pPriv - private data section of this instance
+ * \param pMsgId - The received AMS message id will be written to this pointer
+ * \param pSourceAddress - The received AMS source address will be written to this pointer
+ * \param pPayload - The received AMS payload will be written to this pointer
+ * \param pPayloadLen - The received AMS payload length will be written to this pointer
+ *
+ * \return true, if operation was successful. false if no message got be retrieved.
+ */
+bool UCSI_GetAmsMessage(UCSI_Data_t *my, uint16_t *pMsgId, uint16_t *pSourceAddress, uint8_t **pPayload, uint32_t *pPayloadLen);
+
+/**
+ * \brief Releases the message memory returned by UCSI_GetAmsMessage.
+ *
+ * \note Call this function only from single context (not from ISR)
+ * \note This function must be called when the data of UCSI_GetAmsMessage has been processed.
+ * If this function is not called, UCSI_GetAmsMessage will return always the reference to the same data.
+ * \note UCSI_Service may also free the data returned by UCSI_GetAmsMessage!
+ *
+ * \param pPriv - private data section of this instance
+ */
+void UCSI_ReleaseAmsMessage(UCSI_Data_t *my);
+
+/**
+ * \brief Enables or disables a route by the given routeId
+ * \note Call this function only from single context (not from ISR)
+ *
+ * \param pPriv - private data section of this instance
+ * \param routeId - identifier as given in XML file along with MOST socket (unique)
+ * \param isActive - true, route will become active. false, route will be deallocated
+ *
+ * \return true, if route was found and the specific command was enqueued to UNICENS.
+ */
+bool UCSI_SetRouteActive(UCSI_Data_t *pPriv, uint16_t routeId, bool isActive);
+
+/**
+ * \brief Enables or disables a route by the given routeId
+ * \note Call this function only from single context (not from ISR)
+ *
+ * \param pPriv - private data section of this instance
+ * \param targetAddress - targetAddress - The node / group target address
+ * \param isBurst - true, write blockCount I2C telegrams dataLen with a single call. false, write a single I2C message.
+ * \param blockCount - amount of blocks to write. Only used when isBurst is set to true.
+ * \param slaveAddr - The I2C address.
+ * \param timeout - Timeout in milliseconds.
+ * \param dataLen - Amount of bytes to send via I2C
+ * \param pData - The payload to be send.
+ * \param result_fptr - Callback function notifying the asynchronous result.
+ * \param request_ptr - User reference which is provided for the asynchronous result.
+ *
+ * \return true, if route command was enqueued to UNICENS.
+ */
+bool UCSI_I2CWrite(UCSI_Data_t *pPriv, uint16_t targetAddress, bool isBurst, uint8_t blockCount,
+ uint8_t slaveAddr, uint16_t timeout, uint8_t dataLen, uint8_t *pData,
+ Ucsi_ResultCb_t result_fptr, void *request_ptr);
+
+/**
+ * \brief Enables or disables a route by the given routeId
+ * \note Call this function only from single context (not from ISR)
+ *
+ * \param pPriv - private data section of this instance
+ * \param targetAddress - targetAddress - The node / group target address
+ * \param gpioPinId - INIC GPIO PIN starting with 0 for the first GPIO.
+ * \param isHighState - true, high state = 3,3V. false, low state = 0V.
+ *
+ * \return true, if GPIO command was enqueued to UNICENS.
+ */
+bool UCSI_SetGpioState(UCSI_Data_t *pPriv, uint16_t targetAddress, uint8_t gpioPinId, bool isHighState);
+
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
/* CALLBACK SECTION */
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
*/
extern void UCSI_CB_OnSetServiceTimer(void *pTag, uint16_t timeout);
+/**
+ * \brief Callback when ever the state of the Network has changed.
+ * \note This function must be implemented by the integrator
+ * \param pTag - Pointer given by the integrator by UCSI_Init
+ * \param isAvailable - true, if the network is operable. false, network is down. No message or stream can be sent or received.
+ * \param packetBandwidth - The amount of bytes per frame reserved for the Ethernet channel. Must match to the given packetBw value passed to UCSI_NewConfig.
+ * \param amountOfNodes - The amount of network devices found in the ring.
+ */
+extern void UCSI_CB_OnNetworkState(void *pTag, bool isAvailable, uint16_t packetBandwidth, uint8_t amountOfNodes);
/**
- * \brief Callback when ever an Unicens forms a human readable message.
+ * \brief Callback when ever an UNICENS forms a human readable message.
* This can be error events or when enabled also debug messages.
* \note This function must be implemented by the integrator
* \param pTag - Pointer given by the integrator by UCSI_Init
+ * \param isError - true, if this message is an important error message. false, user/debug message, not important.
* \param format - Zero terminated format string (following printf rules)
* \param vargsCnt - Amount of parameters stored in "..."
*/
-extern void UCSI_CB_OnUserMessage(void *pTag, const char format[],
+extern void UCSI_CB_OnUserMessage(void *pTag, bool isError, const char format[],
uint16_t vargsCnt, ...);
-
/**
* \brief Callback when ever this instance needs to be serviced.
* \note Call UCSI_Service by your scheduler at the next run
*/
extern void UCSI_CB_OnServiceRequired(void *pTag);
-
/**
- * \brief Callback when ever a MOST error message was received.
+ * \brief Callback when ever this instance of UNICENS wants to send control data to the LLD.
* \note This function must be implemented by the integrator
* \param pTag - Pointer given by the integrator by UCSI_Init
- * \note All following parameters belong to the usual MOST message
+ * \param pPayload - Byte array to be sent on the INIC control channel
+ * \param payloadLen - Length of pPayload in Byte
*/
-extern void UCSI_CB_OnMostError(void *pTag, uint16_t sourceAddr,
- uint8_t fblock, uint8_t inst, uint16_t function, uint8_t op,
+extern void UCSI_CB_OnTxRequest(void *pTag,
const uint8_t *pPayload, uint32_t payloadLen);
+/**
+ * \brief Callback when UNICENS instance has been stopped.
+ * \note This event can be used to free memory holding the resources
+ * passed with UCSI_NewConfig
+ * \note This function must be implemented by the integrator
+ * \param pTag - Pointer given by the integrator by UCSI_Init
+ */
+extern void UCSI_CB_OnStop(void *pTag);
/**
- * \brief Callback when ever this instance wants to send a message to INIC.
+ * \brief Callback when UNICENS instance has received an AMS message
* \note This function must be implemented by the integrator
+ * \note After this callback, call UCSI_GetAmsMessage indirect by setting a flag
* \param pTag - Pointer given by the integrator by UCSI_Init
- * \param pPayload - Byte array to be sent on the INIC control channel
- * \param payloadLen - Length of pPayload in Byte
*/
-extern void UCSI_CB_SendMostMessage(void *pTag,
- const uint8_t *pPayload, uint32_t payloadLen);
+extern void UCSI_CB_OnAmsMessageReceived(void *pTag);
/**
- * \brief Callback when Unicens instance has been stopped.
- * \note This event can be used to free memory holding the resources
- * passed with UCSI_NewConfig
+ * \brief Callback when a route become active / inactive.
* \note This function must be implemented by the integrator
* \param pTag - Pointer given by the integrator by UCSI_Init
+ * \param routeId - identifier as given in XML file along with MOST socket (unique)
+ * \param isActive - true, if the route is now in use. false, the route is not established.
+ * \param connectionLabel - The connection label used on the Network. Only valid, if isActive=true
*/
-extern void UCSI_CB_OnStop(void *pTag);
+extern void UCSI_CB_OnRouteResult(void *pTag, uint16_t routeId, bool isActive, uint16_t connectionLabel);
+
+/**
+ * \brief Callback when a INIC GPIO changes its state
+ * \note This function must be implemented by the integrator
+ * \param pTag - Pointer given by the integrator by UCSI_Init
+ * \param nodeAddress - Node Address of the INIC sending the update.
+ * \param gpioPinId - INIC GPIO PIN starting with 0 for the first GPIO.
+ * \param isHighState - true, high state = 3,3V. false, low state = 0V.
+ */
+extern void UCSI_CB_OnGpioStateChange(void *pTag, uint16_t nodeAddress, uint8_t gpioPinId, bool isHighState);
/**
- * \brief Callback on Unicens management results.
+ * \brief Callback when nodes are discovered or disappear
* \note This function must be implemented by the integrator
* \param pTag - Pointer given by the integrator by UCSI_Init
- * \param code - Result code
- * \param nodeAddress - Node address of the device causing this event
- * \param pNode - Pointer to node structure holding details of changed node
+ * \param code - Report code
+ * \param nodeAddress - Node Address of the INIC sending the update.
+ * \param pNode - Reference to the node structure or NULL.
*/
extern void UCSI_CB_OnMgrReport(void *pTag, Ucs_MgrReport_t code, uint16_t nodeAddress, Ucs_Rm_Node_t *pNode);