}
-/** Callback when ever UNICENS forms a human readable message. */
-void UCSI_CB_OnUserMessage(void *pTag, const char format[],
+/**
+ * \brief Callback when ever an Unicens forms a human readable message.
+ * This can be error events or when enabled also debug messages.
+ * \note This function must be implemented by the integrator
+ * \param pTag - Pointer given by the integrator by UCSI_Init
+ * \param format - Zero terminated format string (following printf rules)
+ * \param vargsCnt - Amount of parameters stored in "..."
+ */
+void UCSI_CB_OnUserMessage(void *pTag, bool isError, const char format[],
uint16_t vargsCnt, ...) {
- //DEBUG (afbIface, format, args);
- va_list args;
- va_start (args, format);
- vfprintf (stderr, format, args);
- va_end(args);
+ va_list argptr;
+ char outbuf[300];
+ pTag = pTag;
+ va_start(argptr, vargsCnt);
+ vsprintf(outbuf, format, argptr);
+ va_end(argptr);
+ if (isError)
+ NOTICE (afbIface, outbuf);
}
/** UCSI_Service cannot be called directly within UNICENS context, need to service stack through mainloop */
sd_event_add_time(afb_daemon_get_event_loop(afbIface->daemon), NULL, CLOCK_MONOTONIC, 0, 0, OnServiceRequiredCB, pTag);
}
-
-/**
- * \brief Callback when ever a MOST error message was received.
- * \note This function must be implemented by the integrator
- * \param pTag - Pointer given by the integrator by UCSI_Init
- * \note All following parameters belong to the usual MOST message
- */
-PUBLIC void UCSI_CB_OnMostError(void *pTag, uint16_t sourceAddr,
- uint8_t fblock, uint8_t inst, uint16_t function, uint8_t op,
- const uint8_t *pPayload, uint32_t payloadLen) {
-
- // Error to send to syslog
- DEBUG (afbIface, "OnMostError source=0x%x", sourceAddr);
-}
-
-
-
/* Callback when ever this UNICENS wants to send a message to INIC. */
-PUBLIC void UCSI_CB_SendMostMessage(void *pTag, const uint8_t *pData, uint32_t len) {
-
+PUBLIC void UCSI_CB_OnTxRequest(void *pTag, const uint8_t *pData, uint32_t len) {
ucsContextT *ucsContext = (ucsContextT*) pTag;
CdevData_t *cdevTx = &ucsContext->tx;
uint32_t total = 0;
}
-/**
- * \brief Callback on Unicens management results.
- * \note This function must be implemented by the integrator
- * \param pTag - Pointer given by the integrator by UCSI_Init
- * \param code - Result code
- * \param nodeAddress - Node address of the device causing this event
- * \param pNode - Pointer to node structure holding details of changed node
- */
-extern void UCSI_CB_OnMgrReport(void *pTag, Ucs_MgrReport_t code, uint16_t nodeAddress, Ucs_Rm_Node_t *pNode) {
-
- DEBUG (afbIface, "OnMgrReport: Ucs_MgrReport_t=%d nodeAdresse=0x%x", code, nodeAddress);
+/** This callback will be raised, when ever an applicative message on the control channel arrived */
+void UCSI_CB_OnAmsMessageReceived(void *pTag)
+{
+ /* If not interested, just ignore this event.
+ Otherwise UCSI_GetAmsMessage may now be called asynchronous (mainloop) to get the content.
+ Don't forget to call UCSI_ReleaseAmsMessage after that */
}
bool Cdev_Init(CdevData_t *d, const char *fileName, bool read, bool write)
int ok;
len = read (ucsContext->rx.fileHandle, &pBuffer, sizeof(pBuffer));
-
+ if (0 == len)
+ return 0;
ok= UCSI_ProcessRxData(&ucsContext->ucsiData, pBuffer, (uint16_t)len);
if (!ok) {
DEBUG (afbIface, "Buffer overrun (not handle)");
ucsConfig = ParseFile (request);
if (NULL == ucsConfig) goto OnErrorExit;
- // Fulup->Thorsten BUG InitializeCdevs should fail when control does not exit
- if (!InitializeCdevs(&ucsContext)) {
- afb_req_fail_f (request, "devnit-error", "Fail to initialise device [rx=%s tx=%s]", CONTROL_CDEV_RX, CONTROL_CDEV_TX);
- goto OnErrorExit;
- }
+ /* When ucsContextS is set, do not initalize UNICENS, CDEVs or system hooks, just load new XML */
+ if (!ucsContextS)
+ {
+ if (!ucsContextS && !InitializeCdevs(&ucsContext)) {
+ afb_req_fail_f (request, "devnit-error", "Fail to initialise device [rx=%s tx=%s]", CONTROL_CDEV_RX, CONTROL_CDEV_TX);
+ goto OnErrorExit;
+ }
- // Initialise Unicens Config Data Structure
- UCSI_Init(&ucsContext.ucsiData, &ucsContext);
+ /* Initialise UNICENS Config Data Structure */
+ UCSI_Init(&ucsContext.ucsiData, &ucsContext);
- // Initialise Unicens with parsed config
- if (!UCSI_NewConfig(&ucsContext.ucsiData, ucsConfig)) {
- afb_req_fail_f (request, "UNICENS-init", "Fail to initialize Unicens");
- goto OnErrorExit;
- }
+ /* register aplayHandle file fd into binder mainloop */
+ err = sd_event_add_io(afb_daemon_get_event_loop(afbIface->daemon), &evtSource, ucsContext.rx.fileHandle, EPOLLIN, onReadCB, &ucsContext);
+ if (err < 0) {
+ afb_req_fail_f (request, "register-mainloop", "Cannot hook events to mainloop");
+ goto OnErrorExit;
+ }
- // register aplayHandle file fd into binder mainloop
- err = sd_event_add_io(afb_daemon_get_event_loop(afbIface->daemon), &evtSource, ucsContext.rx.fileHandle, EPOLLIN, onReadCB, &ucsContext);
- if (err < 0) {
- afb_req_fail_f (request, "register-mainloop", "Cannot hook events to mainloop");
- goto OnErrorExit;
+ /* init UNICENS Volume Library */
+ ucsContext.channels = UCSI_Vol_Init (&ucsContext.ucsiData, volumeCB);
+ if (!ucsContext.channels) {
+ afb_req_fail_f (request, "register-volume", "Could not enqueue new Unicens config");
+ goto OnErrorExit;
+ }
+ /* save this in a statical variable until ucs2vol move to C */
+ ucsContextS = &ucsContext;
}
-
- // init Unicens Volume Library
- ucsContext.channels = UCSI_Vol_Init (&ucsContext.ucsiData, volumeCB);
- if (!ucsContext.channels) {
- afb_req_fail_f (request, "register-volume", "Could not enqueue new Unicens config");
+ /* Initialise UNICENS with parsed config */
+ if (!UCSI_NewConfig(&ucsContext.ucsiData, ucsConfig)) {
+ afb_req_fail_f (request, "UNICENS-init", "Fail to initialize UNICENS");
goto OnErrorExit;
}
- // save this in a statical variable until ucs2vol move to C
- ucsContextS = &ucsContext;
afb_req_success(request,NULL,"UNICENS-active");
Code Review / apps / agl-service-unicens.git / blobdiff