# This file is your local configuration file and is where all local user settings
# are placed. The comments in this file give some guide to the options a new user
# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
+# be set in this file. More adventurous users can look at local.conf.extended
# which contains other examples of configuration which can be placed in this file
# but new users likely won't need any of them initially.
#
-# Lines starting with the '#' character are commented out and in some cases the
+# Lines starting with the '#' character are commented out and in some cases the
# default values are provided as comments to show people example syntax. Enabling
# the option is a question of removing the # character and making any change to the
# variable as required.
#MACHINE ?= "qemuarm"
#MACHINE ?= "qemuarm64"
#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
#MACHINE ?= "qemuppc"
#MACHINE ?= "qemux86"
#MACHINE ?= "qemux86-64"
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86"
+# This sets the default machine to be qemux86-64 if no other machine is selected:
+MACHINE ??= "qemux86-64"
#
# Where to place downloads
#
# Package Management configuration
#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
# to generate the root filesystems.
# Options are:
# - 'package_deb' for debian style deb files
PACKAGE_CLASSES ?= "package_rpm"
#
-# SDK/ADT target architecture
+# SDK target architecture
#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"
#
# Extra image configuration defaults
#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
# "tools-debug" - add debugging tools (gdb, strace)
# "eclipse-debug" - add Eclipse remote debugging support
-# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
# "debug-tweaks" - make an image suitable for development
# e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
#
# Additional image features
#
# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
+# enable extra features. Some available options which can be included in this variable
# are:
# - 'buildstats' collect build statistics
# - 'image-mklibs' to reduce shared library files size for an image
# - 'image-prelink' in order to prelink the filesystem image
-# - 'image-swab' to perform host system intrusion detection
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-# NOTE: image-prelink is currently broken due to problems with the prelinker. It is advised
-# that you do NOT run the prelinker at this time.
-USER_CLASSES ?= "buildstats image-mklibs"
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
#
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO:qemuall = "1"
+
#
# Interactive shell configuration
#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
# multithreaded and needs to be able to handle the case where more than one parallel
# process may require the user's attention. The default is iterate over the available
# terminal types to find one that works.
# files and damages the build in ways which may not be easily recoverable.
# It's necesary to monitor /tmp, if there is no space left the build will fail
# with very exotic errors.
-BB_DISKMON_DIRS = "\
+BB_DISKMON_DIRS ??= "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
#
# Shared-state files from other locations
#
-# As mentioned above, shared state files are prebuilt cache data objects which can
+# As mentioned above, shared state files are prebuilt cache data objects which can
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
# cache locations to check for the shared objects.
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
# at the end as shown in the examples below. This will be substituted with the
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# AGL Project SState Mirror
+#
+# The AGL Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
+# For AGL:
+#SSTATE_MIRRORS += "file://.* http://download.automotivelinux.org/sstate-mirror/${AGL_BRANCH}/${DEFAULTTUNE}/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
-# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+# By default native qemu will build with a builtin VNC server where graphical output can be
+# seen. The line below enables the SDL UI frontend too.
+PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
+# By default libsdl2-native will be built, if you want to use your host's libSDL instead of
+# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+#ASSUME_PROVIDED += "libsdl2-native"
+
+# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
+# a handy set of menus for controlling the emulator.
+#PACKAGECONFIG:append:pn-qemu-system-native = " gtk+"
+
+#
+# Parallelism Options
+#
+# These two options control how much parallelism BitBake should use. The first
+# option determines how many tasks bitbake should run in parallel:
+#
+#BB_NUMBER_THREADS ?= "4"
+#
+# Default to setting automatically based on cpu count
+#BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
+#
+# The second option controls how many processes make should run in parallel when
+# running compile tasks:
+#
+#PARALLEL_MAKE ?= "-j 4"
+#
+# Default to setting automatically based on cpu count
+#PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
+#
+# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
+# be appropriate for example.
+
+#
+# Hash Equivalence
+#
+# Enable support for automatically running a local hash equivalence server and
+# instruct bitbake to use a hash equivalence aware signature generator. Hash
+# equivalence improves reuse of sstate by detecting when a given sstate
+# artifact can be reused as equivalent, even if the current task hash doesn't
+# match the one that generated the artifact.
+#
+# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
+#
+#BB_HASHSERVE = "auto"
+#BB_SIGNATURE_HANDLER = "OEEquivHash"
+
+
+# The network based PR service host and port
+# Uncomment the following lines to enable PRservice.
+# Set PRSERV_HOST to 'localhost:0' to automatically
+# start local PRService.
+# Set to other values to use remote PRService.
+#PRSERV_HOST = "localhost:0"
+
+
+# Archive the source and put them to ${DEPLOY_DIR}/sources/.
+#
+#INHERIT += "archiver"
+#
+# The tarball for the patched source will be created by default, and you
+# can configure the archiver as follow:
+#
+# Create archive for:
+# 1) original (or unpacked) source:
+#ARCHIVER_MODE[src] = "original"
+# 2) patched source: (default)
+#ARCHIVER_MODE[src] = "patched"
+# 3) configured source:
+#ARCHIVER_MODE[src] = "configured"
+#
+# 4) the patches between do_unpack and do_patch:
+#ARCHIVER_MODE[diff] = "1"
+# set the files that you'd like to exclude from the diff:
+#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
+#
+# 5) the environment data, similar to 'bitbake -e recipe':
+#ARCHIVER_MODE[dumpdata] = "1"
+#
+# 6) the recipe (.bb and .inc):
+#ARCHIVER_MODE[recipe] = "1"
+#
+# 7) Whether output the .src.rpm package:
+#ARCHIVER_MODE[srpm] = "1"
+#
+# 8) Filter the license, the recipe whose license in
+# COPYLEFT_LICENSE_INCLUDE will be included, and in
+# COPYLEFT_LICENSE_EXCLUDE will be excluded.
+#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
+#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
+#
+# 9) Config the recipe type that will be archived, the type can be
+# target, native, nativesdk, cross, crosssdk and cross-canadian,
+# you can set one or more types. Archive all types by default.
+#COPYLEFT_RECIPE_TYPES = 'target'
+#
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
Code Review / AGL / meta-agl.git / blobdiff