* limitations under the License.
*/
-/*
- * A representation of an OBD-II PID.
- *
- * pid - The 1 byte PID.
- * name - A human readable name to use for this PID when published.
- * frequency - The frequency to request this PID if supported by the vehicle
- * when automatic, recurring OBD-II requests are enabled.
- */
+#include <vector>
+#include "uds/uds.h"
enum UNIT {
POURCENT,
struct afb_event event;
} Obd2Pid;
-/*
- { pid: 0x4, name: "engine.load", frequency: 5 },
- { pid: 0x5, name: "engine.coolant.temperature", frequency: 1 },
- { pid: 0xa, name: "fuel.pressure", frequency: 1 },
- { pid: 0xb, name: "intake.manifold.pressure", frequency: 1 },
- { pid: 0xc, name: "engine.speed", frequency: 5 },
- { pid: 0xd, name: "vehicle.speed", frequency: 5 },
- { pid: 0xf, name: "intake.air.temperature", frequency: 1 },
- { pid: 0x10, name: "mass.airflow", frequency: 5 },
- { pid: 0x11, name: "throttle.position", frequency: 5 },
- { pid: 0x1f, name: "running.time", frequency: 1 },
- { pid: 0x27, name: "fuel.level", frequency: 1 },
- { pid: 0x33, name: "barometric.pressure", frequency: 1 },
- { pid: 0x4c, name: "commanded.throttle.position", frequency: 1 },
- { pid: 0x52, name: "ethanol.fuel.percentage", frequency: 1 },
- { pid: 0x5a, name: "accelerator.pedal.position", frequency: 5 },
- { pid: 0x5c, name: "engine.oil.temperature", frequency: 1 },
- { pid: 0x63, name: "engine.torque", frequency: 1 },
-};
- */
-
/* Public: Check if a request is an OBD-II PID request.
*
* Returns true if the request is a mode 1 request and it has a 1 byte PID.
* Object to handle obd2 session with pre-scan of supported pid
* then request them regularly
*/
-class obd2_handler_c {
+class obd2_handler_t {
private:
- public:
- /*
- * Pre-defined OBD-II PIDs to query for if supported by the vehicle.
- */
- const Obd2Pid OBD2_PIDS[] = {
- { pid: 0x04, name: "obd2.engine.load", min:0, max: 100, unit: POURCENT, frequency: 5, supported: false },
- { pid: 0x05, name: "obd2.engine.coolant.temperature", min: -40, max: 215, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
- { pid: 0x0a, name: "obd2.fuel.pressure", min: 0, max: 765, unit: KPA, frequency: 1, supported: false },
- { pid: 0x0b, name: "obd2.intake.manifold.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false },
- { pid: 0x0c, name: "obd2.engine.speed", min: 0, max: 16383, unit: RPM, frequency: 5, supported: false },
- { pid: 0x0d, name: "obd2.vehicle.speed", min: 0, max: 255, unit: KM_H, frequency: 5, supported: false },
- { pid: 0x0f, name: "obd2.intake.air.temperature", min: -40, max:215, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
- { pid: 0x10, name: "obd2.mass.airflow", min: 0, max: 655, unit: GRAMS_SEC, frequency: 5, supported: false },
- { pid: 0x11, name: "obd2.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
- { pid: 0x1f, name: "obd2.running.time", min: 0, max: 65535, unit: SECONDS, frequency: 1, supported: false },
- { pid: 0x2d, name: "obd2.EGR.error", min: -100, max: 99, unit: POURCENT, frequency: 0, supported: false },
- { pid: 0x2f, name: "obd2.fuel.level", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
- { pid: 0x33, name: "obd2.barometric.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false },
- { pid: 0x4c, name: "obd2.commanded.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
- { pid: 0x52, name: "obd2.ethanol.fuel.percentage", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
- { pid: 0x5a, name: "obd2.accelerator.pedal.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
- { pid: 0x5b, name: "obd2.hybrid.battery-pack.remaining.life", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
- { pid: 0x5c, name: "obd2.engine.oil.temperature",min: -40, max: 210, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
- { pid: 0x63, name: "obd2.engine.torque", min: 0, max: 65535, unit: NM, frequency: 1, supported: false },
- };
+ public:
+ /*
+ * Pre-defined OBD-II PIDs to query for if supported by the vehicle.
+ */
+ const Obd2Pid OBD2_PIDS[] = {
+ { pid: 0x04, name: "obd2.engine.load", min:0, max: 100, unit: POURCENT, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x05, name: "obd2.engine.coolant.temperature", min: -40, max: 215, unit: DEGREES_CELSIUS, frequency: 1, supported: false, event: nullptr},
+ { pid: 0x0a, name: "obd2.fuel.pressure", min: 0, max: 765, unit: KPA, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x0b, name: "obd2.intake.manifold.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x0c, name: "obd2.engine.speed", min: 0, max: 16383, unit: RPM, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x0d, name: "obd2.vehicle.speed", min: 0, max: 255, unit: KM_H, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x0f, name: "obd2.intake.air.temperature", min: -40, max:215, unit: DEGREES_CELSIUS, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x10, name: "obd2.mass.airflow", min: 0, max: 655, unit: GRAMS_SEC, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x11, name: "obd2.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x1f, name: "obd2.running.time", min: 0, max: 65535, unit: SECONDS, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x2d, name: "obd2.EGR.error", min: -100, max: 99, unit: POURCENT, frequency: 0, supported: false, event: nullptr },
+ { pid: 0x2f, name: "obd2.fuel.level", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x33, name: "obd2.barometric.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x4c, name: "obd2.commanded.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x52, name: "obd2.ethanol.fuel.percentage", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x5a, name: "obd2.accelerator.pedal.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x5b, name: "obd2.hybrid.battery-pack.remaining.life", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false, event: nullptr },
+ { pid: 0x5c, name: "obd2.engine.oil.temperature",min: -40, max: 210, unit: DEGREES_CELSIUS, frequency: 1, supported: false, event: nullptr },
+ { pid: 0x63, name: "obd2.engine.torque", min: 0, max: 65535, unit: NM, frequency: 1, supported: false, event: nullptr }
+ };
+
+ /**
+ * @brief:
+ *
+ * Returns
+ */
+ void find_obd2_pid(const char *name, std::vector<Obd2Pid> *pids);
-
- /* Public: Check if a request is an OBD-II PID request.
- *
- * Returns true if the request is a mode 1 request and it has a 1 byte PID.
- */
- void find_obd2_pid(const char *name, std::Vector<Obd2Pid> *pids);
+ /**
+ * @brief Check if a request is an OBD-II PID request.
+ *
+ * @return true if the request is a mode 1 request and it has a 1 byte PID.
+ */
+ bool is_obd2_request(DiagnosticRequest *request);
- /* Public: Check if a request is an OBD-II PID request.
- *
- * Returns true if the request is a mode 1 request and it has a 1 byte PID.
- */
- bool is_obd2_request(DiagnosticRequest *request);
-
- /*
- * Public: Check if requested signal name is an obd2 pid
- *
- * Returns true if name began with ob2.* else false.
- */
- bool is_obd2_signal(const char *name);
+ /**
+ * @brief Check if requested signal name is an obd2 pid
+ *
+ * @return true if name began with ob2.* else false.
+ */
+ bool is_obd2_signal(const char *name);
- /*
- * Public: pass response to UDS-C library function
- * diagnostic_decode_obd2_pid()
- *
- * Return: float number representing the requested value.
- */
- bool decode_obd2_response(DiagnosticResponse* responce);
-}
\ No newline at end of file
+ /*
+ * @brief pass response to UDS-C library function
+ * diagnostic_decode_obd2_pid()
+ *
+ * @return float number representing the requested value.
+ */
+ bool decode_obd2_response(DiagnosticResponse* responce);
+};
\ No newline at end of file
Code Review / apps / agl-service-can-low-level.git / blobdiff