Fix: used new created classes.

[apps/agl-service-can-low-level.git] / src / diagnostic / diagnostic-message.cpp

diff --git a/src/diagnostic/diagnostic-message.cpp b/src/diagnostic/diagnostic-message.cpp
index 656a868..76b9799 100644 (file)
--- a/src/diagnostic/diagnostic-message.cpp
+++ b/src/diagnostic/diagnostic-message.cpp
@@ -32,12 +32,12 @@ const char *UNIT_NAMES[10] = {
        "NM"
 };
 
-obd2_signals_t::obd2_signals_t(uint8_t pid, const char* generic_name, const int min, const int max, enum UNIT unit, int frequency, bool supported)
+obd2_signal_t::obd2_signal_t(uint8_t pid, const char* generic_name, const int min, const int max, enum UNIT unit, int frequency, bool supported)
        :       pid_{pid}, generic_name_{generic_name}, min_{min}, max_{max}, unit_{unit}, frequency_{frequency}, supported_{supported}
 {
 }
 
-uint32_t obd2_signals_t::get_pid()
+uint32_t obd2_signal_t::get_pid()
 {
        return (uint32_t)pid_;
 }
@@ -46,12 +46,12 @@ uint32_t obd2_signals_t::get_pid()
  * @fn std::vector<std::string> find_signals(const openxc_DynamicField &key)
  * @brief return signals name found searching through CAN_signals and OBD2 pid
  * 
- * @param[in] const openxc_DynamicField : can contain numeric or string value in order to search against 
+ * @param[in] key - can contain numeric or string value in order to search against 
  *   can signals or obd2 signals name.
  *
- * @return std::vector<std::string> Vector of signals name found. 
+ * @return Vector of signals name found. 
  */
-void obd2_signals_t::find_obd2_signals(const openxc_DynamicField &key, std::vector<obd2_signals_t*>& found_signals)
+void obd2_signal_t::find_obd2_signals(const openxc_DynamicField &key, std::vector<obd2_signal_t*>& found_signals)
 {
        switch(key.type)
        {
@@ -68,7 +68,7 @@ void obd2_signals_t::find_obd2_signals(const openxc_DynamicField &key, std::vect
        DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());
 }
 
-bool obd2_signals_t::is_obd2_response(can_message_t can_message)
+bool obd2_signal_t::is_obd2_response(can_message_t can_message)
 {
        /*
        if(can_message.get_id() >= 0x7E8 && can_message.get_id() <= 0x7EF)
@@ -111,7 +111,7 @@ bool obd2_signals_t::is_obd2_response(can_message_t can_message)
        */
 }
 
-void obd2_signals_t::add_request(int pid)
+void obd2_signal_t::add_request(int pid)
 {
        DiagnosticRequest request = {
        arbitration_id: OBD2_FUNCTIONAL_BROADCAST_ID,
@@ -123,7 +123,7 @@ void obd2_signals_t::add_request(int pid)
 *
 * @return true if the request is a mode 1 request and it has a 1 byte PID.
 */
-bool obd2_signals_t::is_obd2_request(DiagnosticRequest* request)
+bool obd2_signal_t::is_obd2_request(DiagnosticRequest* request)
 {
        return request->mode == 0x1 && request->has_pid && request->pid < 0xff;
 }
@@ -133,7 +133,7 @@ bool obd2_signals_t::is_obd2_request(DiagnosticRequest* request)
 * 
 * @return true if name began with obd2 else false.
 */
-bool obd2_signals_t::is_obd2_signal(const char *name)
+bool obd2_signal_t::is_obd2_signal(const char *name)
 {
        if(fnmatch("obd2.*", name, FNM_CASEFOLD) == 0)
                return true;
@@ -148,12 +148,12 @@ bool obd2_signals_t::is_obd2_signal(const char *name)
 * value of the PID, using the standard formulas (see
 * http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01).
 *
-* @param[in] DiagnosticResponse response - the received DiagnosticResponse (the data is in response.payload,
+* @param[in] response - the received DiagnosticResponse (the data is in response.payload,
 *  a byte array). This is most often used when the byte order is
 *  signiticant, i.e. with many OBD-II PID formulas.
-* @param[in] float parsed_payload - the entire payload of the response parsed as an int.
+* @param[in] parsed_payload - the entire payload of the response parsed as an int.
 */
-float obd2_signals_t::decode_obd2_response(const DiagnosticResponse* response, float parsedPayload)
+float obd2_signal_t::decode_obd2_response(const DiagnosticResponse* response, float parsedPayload)
 {
        return diagnostic_decode_obd2_pid(response);
 }
\ No newline at end of file