-/*
- * Copyright (C) 2015, 2016 "IoT.bzh"
- * Author "Romain Forlot" <romain.forlot@iot.bzh>
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
+///
+/// Copyright (C) 2015, 2016 "IoT.bzh"
+/// Author "Romain Forlot" <romain.forlot@iot.bzh>
+///
+/// Licensed under the Apache License, Version 2.0 (the "License");
+/// you may not use this file except in compliance with the License.
+/// You may obtain a copy of the License at
+///
+/// http://www.apache.org/licenses/LICENSE-2.0
+///
+/// Unless required by applicable law or agreed to in writing, software
+/// distributed under the License is distributed on an "AS IS" BASIS,
+/// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+/// See the License for the specific language governing permissions and
+/// limitations under the License.
+///
#pragma once
#include <string>
#include "openxc.pb.h"
-#include "utils/timer.hpp"
-#include "can/can-bus.hpp"
-#include "can/can-message.hpp"
-#include "obd2/obd2-signals.hpp"
+#include "../utils/timer.hpp"
+#include "can-bus.hpp"
+#include "can-message.hpp"
+#include "can-message-definition.hpp"
+#include "../diagnostic/diagnostic-message.hpp"
extern "C"
{
#define MESSAGE_SET_ID 0
-/**
- * @brief The type signature for a CAN signal decoder.
- *
- * @desc A SignalDecoder transforms a raw floating point CAN signal into a number,
- * string or boolean.
- *
- * @param[in] CanSignal signal - The CAN signal that we are decoding.
- * @param[in] CanSignal signals - The list of all signals.
- * @param[in] int signalCount - The length of the signals array.
- * @param[in] float value - The CAN signal parsed from the message as a raw floating point
- * value.
- * @param[out] bool send - An output parameter. If the decoding failed or the CAN signal should
- * not send for some other reason, this should be flipped to false.
- *
- * @return a decoded value in an openxc_DynamicField struct.
- */
-typedef openxc_DynamicField (*SignalDecoder)(struct CanSignal& signal,
- const std::vector<CanSignal>& signals, float value, bool* send);
+class can_signal_t;
-/**
- * @brief: The type signature for a CAN signal encoder.
- *
- * @desc A SignalEncoder transforms a number, string or boolean into a raw floating
- * point value that fits in the CAN signal.
- *
- * @params[signal] - The CAN signal to encode.
- * @params[value] - The dynamic field to encode.
- * @params[send] - An output parameter. If the encoding failed or the CAN signal should
- * not be encoded for some other reason, this will be flipped to false.
- */
-typedef uint64_t (*SignalEncoder)(struct CanSignal* signal,
- openxc_DynamicField* value, bool* send);
-
-/**
- * @struct CanSignalState
- *
- * @brief A state encoded (SED) signal's mapping from numerical values to
- * OpenXC state names.
- */
-struct CanSignalState {
- const int value; /*!< int value - The integer value of the state on the CAN bus.*/
- const char* name; /*!< char* name - The corresponding string name for the state in OpenXC. */
-};
-typedef struct CanSignalState CanSignalState;
+///
+/// @brief The type signature for a CAN signal decoder.
+///
+/// A SignalDecoder transforms a raw floating point CAN signal into a number,
+/// string or boolean.
+///
+/// @param[in] signal - The CAN signal that we are decoding.
+/// @param[in] signals - The list of all signals.
+/// @param[in] signalCount - The length of the signals array.
+/// @param[in] value - The CAN signal parsed from the message as a raw floating point
+/// value.
+/// @param[out] send - An output parameter. If the decoding failed or the CAN signal should
+/// not send for some other reason, this should be flipped to false.
+///
+/// @return a decoded value in an openxc_DynamicField struct.
+///
+typedef openxc_DynamicField (*SignalDecoder)(can_signal_t& signal,
+ const std::vector<can_signal_t>& signals, float value, bool* send);
-/**
- * @struct CanSignal
- *
- * @brief A CAN signal to decode from the bus and output over USB.
- */
-struct CanSignal {
- struct CanMessageDefinition* message; /*!< message - The message this signal is a part of. */
- const char* generic_name; /*!< generic_name - The name of the signal to be output over USB.*/
- uint8_t bitPosition; /*!< bitPosition - The starting bit of the signal in its CAN message (assuming
- * non-inverted bit numbering, i.e. the most significant bit of
- * each byte is 0) */
- uint8_t bitSize; /*!< bitSize - The width of the bit field in the CAN message. */
- float factor; /*!< factor - The final value will be multiplied by this factor. Use 1 if you
- * don't need a factor. */
- float offset; /*!< offset - The final value will be added to this offset. Use 0 if you
- * don't need an offset. */
- float minValue; /*!< minValue - The minimum value for the processed signal.*/
- float maxValue; /*!< maxValue - The maximum value for the processed signal. */
- FrequencyClock frequencyClock; /*!< frequencyClock - A FrequencyClock struct to control the maximum frequency to
- * process and send this signal. To process every value, set the
- * clock's frequency to 0. */
- bool sendSame; /*!< sendSame - If true, will re-send even if the value hasn't changed.*/
- bool forceSendChanged; /*!< forceSendChanged - If true, regardless of the frequency, it will send the
- * value if it has changed. */
- const CanSignalState* states; /*!< states - An array of CanSignalState describing the mapping
- * between numerical and string values for valid states. */
- uint8_t stateCount; /*!< stateCount - The length of the states array. */
- bool writable; /*!< writable - True if the signal is allowed to be written from the USB host
- * back to CAN. Defaults to false.*/
- SignalDecoder decoder; /*!< decoder - An optional function to decode a signal from the bus to a human
- * readable value. If NULL, the default numerical decoder is used. */
- SignalEncoder encoder; /*!< encoder - An optional function to encode a signal value to be written to
- * CAN into a byte array. If NULL, the default numerical encoder
- * is used. */
- bool received; /*!< received - True if this signal has ever been received.*/
- float lastValue; /*!< lastValue - The last received value of the signal. If 'received' is false,
- * this value is undefined. */
-};
-typedef struct CanSignal CanSignal;
+///
+/// @brief: The type signature for a CAN signal encoder.
+///
+/// A SignalEncoder transforms a number, string or boolean into a raw floating
+/// point value that fits in the CAN signal.
+///
+/// @param[in] signal - The CAN signal to encode.
+/// @param[in] value - The dynamic field to encode.
+/// @param[out] send - An output parameter. If the encoding failed or the CAN signal should
+/// not be encoded for some other reason, this will be flipped to false.
+///
+typedef uint64_t (*SignalEncoder)(can_signal_t* signal,
+ openxc_DynamicField* value, bool* send);
class can_signal_t
{
- private:
- struct CanMessageDefinition* message_; /*!< message - The message this signal is a part of. */
- const std::string generic_name_; /*!< generic_name - The name of the signal to be output over USB.*/
- uint8_t bitPosition_; /*!< bitPosition - The starting bit of the signal in its CAN message (assuming
- * non-inverted bit numbering, i.e. the most significant bit of
- * each byte is 0) */
- uint8_t bitSize_; /*!< bitSize - The width of the bit field in the CAN message. */
- float factor_; /*!< factor - The final value will be multiplied by this factor. Use 1 if you
- * don't need a factor. */
- float offset_; /*!< offset - The final value will be added to this offset. Use 0 if you
- * don't need an offset. */
- float min_value_; /*!< minValue - The minimum value for the processed signal.*/
- float max_value_; /*!< maxValue - The maximum value for the processed signal. */
- FrequencyClock clock_; /*!< clock_ - A FrequencyClock struct to control the maximum frequency to
+private:
+ std::uint8_t message_set_id_;
+ std::uint8_t message_id_;
+ std::string generic_name_; /*!< generic_name_ - The name of the signal to be output.*/
+ static std::string prefix_; /*!< prefix_ - generic_name_ will be prefixed with it. It has to reflect the used protocol.
+ * which make easier to sort message when the come in.*/
+ uint8_t bit_position_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming
+ * non-inverted bit numbering, i.e. the most significant bit of
+ * each byte is 0) */
+ uint8_t bit_size_; /*!< bitSize_ - The width of the bit field in the CAN message. */
+ float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you
+ * don't need a factor. */
+ float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you
+ * don't need an offset. */
+ float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/
+ float max_value_; /*!< max_value_ - The maximum value for the processed signal. */
+ frequency_clock_t frequency_; /*!< frequency_ - A frequency_clock_t struct to control the maximum frequency to
* process and send this signal. To process every value, set the
* clock's frequency to 0. */
- bool sendSame_; /*!< sendSame - If true, will re-send even if the value hasn't changed.*/
- bool forceSendChanged_; /*!< forceSendChanged - If true, regardless of the frequency, it will send the
- * value if it has changed. */
- const std::map<const int, const std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping
- * between numerical and string values for valid states. */
- uint8_t state_count_; /*!< state_count_ - The length of the states array. */
- bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host
- * back to CAN. Defaults to false.*/
- SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human
- * readable value. If NULL, the default numerical decoder is used. */
- SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to
- * CAN into a byte array. If NULL, the default numerical encoder
- * is used. */
- bool received_; /*!< received_ - True if this signal has ever been received.*/
- float lastValue_; /*!< lastValue_ - The last received value of the signal. If 'received' is false,
- * this value is undefined. */
+ bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/
+ bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the
+ * value if it has changed. */
+ std::map<uint8_t, std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping
+ * between numerical and string values for valid states. */
+ bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host
+ * back to CAN. Defaults to false.*/
+ SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human
+ * readable value. If NULL, the default numerical decoder is used. */
+ SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to
+ * CAN into a byte array. If NULL, the default numerical encoder
+ * is used. */
+ bool received_; /*!< received_ - True if this signal has ever been received.*/
+ float last_value_; /*!< lastValue_ - The last received value of the signal. If 'received' is false,
+ * this value is undefined. */
- public:
+public:
+ can_signal_t(
+ std::uint8_t message_set_id,
+ std::uint8_t message_id,
+ std::string generic_name,
+ uint8_t bit_position,
+ uint8_t bit_size,
+ float factor,
+ float offset,
+ float min_value,
+ float max_value,
+ frequency_clock_t frequency,
+ bool send_same,
+ bool force_send_changed,
+ std::map<uint8_t, std::string> states,
+ bool writable,
+ SignalDecoder decoder,
+ SignalEncoder encoder,
+ bool received);
-};
+ const can_message_definition_t& get_message() const;
+ const std::string& get_generic_name() const;
+ const std::string get_name() const;
+ const std::string& get_prefix() const;
+ uint8_t get_bit_position() const;
+ uint8_t get_bit_size() const;
+ float get_factor() const;
+ float get_offset() const;
+ float get_min_value() const;
+ float get_max_value() const;
+ frequency_clock_t& get_frequency();
+ bool get_send_same() const;
+ bool get_force_send_changed() const;
+ const std::map<uint8_t, std::string>& get_states() const;
+ const std::string get_states(uint8_t value);
+ size_t get_state_count() const;
+ bool get_writable() const;
+ SignalDecoder& get_decoder();
+ SignalEncoder& get_encoder();
+ bool get_received() const;
+ float get_last_value() const;
-void find_can_signals(const openxc_DynamicField &key, std::vector<CanSignal*>& found_signals);
+ void set_prefix(std::string val);
+ void set_received(bool r);
+ void set_last_value(float val);
+};
\ No newline at end of file
Code Review / apps / agl-service-can-low-level.git / blobdiff