Pin SRCREV used by ti-sgx-ddk-km

[AGL/meta-agl.git] / meta-netboot / README

diff --git a/meta-netboot/README b/meta-netboot/README
index 1304777..b571186 100644 (file)
--- a/meta-netboot/README
+++ b/meta-netboot/README
@@ -40,25 +40,26 @@ On the server side (assuming that the build dir is stored in $BUILD) we can run:
 Target side
 -----------
 
-On the target board, a specific setup should also be done. For example, for Renesas Porter board, the following U-boot environment could be used (adjust IP addresses !):
+On the target board, a specific setup should also be done.\
+For Renesas Gen3 board, u-boot is updated and environment is more like :
 
 ------------------------------------------------------------------
-setenv 'bootkfile' 'uImage+dtb'
-setenv 'bootkaddr' '0x40007fc0'
-setenv 'bootifile' 'initramfs-netboot-image-porter.ext4.gz.u-boot'
-setenv 'bootiaddr' '0x50000000'
-setenv 'ipaddr' '<board_IP>'
-setenv 'serverip' '<server_IP>'
-
-setenv 'bootargs_console' 'console=ttySC6,38400 ignore_loglevel'
-setenv 'bootargs_video' 'vmalloc=384M video=HDMI-A-1:1280x960-32@60'
-setenv 'bootargs_extra' 'rw rootfstype=ext4 rootwait rootdelay=2'
-setenv 'bootargs_root' 'root=/dev/ram0 ramdisk_size=16384 ip=dhcp'
-setenv 'bootkload_net' 'tftp ${bootkaddr} porter/${bootkfile}'
-setenv 'bootiload_net' 'tftp ${bootiaddr} porter/${bootifile}'
-setenv 'bootcmd' 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root} ${bootargs_extra} nbd.server=${serverip}; run bootkload_net; run bootiload_net; bootm ${bootkaddr} ${bootiaddr}'
-
-saveenv # optional: saves env in flash
-run bootcmd # boots the board, executed automatically after power up
+setenv bootargs_console 'console=ttySC0,115200 ignore_loglevel'
+setenv bootargs_extra 'rw rootfstype=ext4 rootwait rootdelay=2'
+setenv bootargs_root 'root=/dev/ram0 ramdisk_size=16384 ip=dhcp'
+setenv bootargs_video 'vmalloc=384M video=HDMI-A-1:1920x1080-32@60'
+setenv serverip '<your_serverip>'
+setenv 'bootdaddr' '0x48000000'
+setenv 'bootdfile' 'Image-r8a7795-h3ulcb.dtb'
+setenv 'bootdload_net' 'tftp ${bootdaddr} h3ulcb/${bootdfile}'
+setenv 'bootkaddr' '0x48080000'
+setenv 'bootkfile' 'Image'
+setenv 'bootkload_net' 'tftp ${bootkaddr} h3ulcb/${bootkfile}'
+setenv 'bootiaddr' '0x5C3F9520'
+setenv 'bootifile' 'initramfs-netboot-image-h3ulcb.ext4.gz'
+setenv 'bootiload_net' 'tftp ${bootraddr} h3ulcb/${bootrfile}'
+setenv 'load_net' 'run bootkload_net; run bootdload_net; run bootiload_net; setenv initrd_size ${filesize}'
+
+setenv 'bootcmd' 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root} ${bootargs_extra} nbd.server=${serverip}; run load_net; booti ${bootkaddr} ${bootiaddr}:${initrd_size} ${bootdaddr}'
 ------------------------------------------------------------------