Re-enable PRserv and HASHserv after api migration

[AGL/meta-agl.git] / meta-netboot / README

diff --git a/meta-netboot/README b/meta-netboot/README
index b571186..a30238b 100644 (file)
--- a/meta-netboot/README
+++ b/meta-netboot/README
@@ -3,16 +3,38 @@ meta-netboot
 
 This layer contains some recipes and configuration adjustments to allow network boot through NBD (network block device).
 
+Maintenance
+-----------
+
+All patches must be submitted via the AGL Gerrit instance at
+https://gerrit.automotivelinux.org.  See this wiki page for
+details:
+
+https://wiki.automotivelinux.org/agl-distro/contributing
+
+Layer maintainers:
+    Jan-Simon Möller <jsmoeller@linuxfoundation.org>
+
+
 Content and usage
 -----------------
 
 This layer creates a new supplementary initrd image which can be downloaded through TFTP with the kernel.
 At boot time, the init script will try to mount the rootfs based on the following kernel command line parameters:
+
 * nbd.server: IP address to reach the NBD server
-* nbd.port: TCP port on which server is listening (default: 10809)
 * nbd.dev: nbd device to use (default: /dev/nbd0)
 * nbd.debug: activate debug mode (init script is then interruptible)
 
+For nbd v2:
+
+* nbd.port: TCP port on which server is listening (default: 10809)
+
+For nbd v3:
+
+* nbd.namev3: The name of the image served by nbd-server.
+
+
 The layer meta-netboot contains recipes for the following components:
 * busybox: activate the built-in NBD client
 * initramfs-netboot: contains the init script started by the kernel: basically, this script mounts the real root filesystem, then pivot_root on it and finally exec systemd.
@@ -50,14 +72,14 @@ setenv bootargs_root 'root=/dev/ram0 ramdisk_size=16384 ip=dhcp'
 setenv bootargs_video 'vmalloc=384M video=HDMI-A-1:1920x1080-32@60'
 setenv serverip '<your_serverip>'
 setenv 'bootdaddr' '0x48000000'
-setenv 'bootdfile' 'Image-r8a7795-h3ulcb.dtb'
+setenv 'bootdfile' 'Image-r8a77951-ulcb.dtb'
 setenv 'bootdload_net' 'tftp ${bootdaddr} h3ulcb/${bootdfile}'
 setenv 'bootkaddr' '0x48080000'
 setenv 'bootkfile' 'Image'
 setenv 'bootkload_net' 'tftp ${bootkaddr} h3ulcb/${bootkfile}'
 setenv 'bootiaddr' '0x5C3F9520'
 setenv 'bootifile' 'initramfs-netboot-image-h3ulcb.ext4.gz'
-setenv 'bootiload_net' 'tftp ${bootraddr} h3ulcb/${bootrfile}'
+setenv 'bootiload_net' 'tftp ${bootiaddr} h3ulcb/${bootifile}'
 setenv 'load_net' 'run bootkload_net; run bootdload_net; run bootiload_net; setenv initrd_size ${filesize}'
 
 setenv 'bootcmd' 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root} ${bootargs_extra} nbd.server=${serverip}; run load_net; booti ${bootkaddr} ${bootiaddr}:${initrd_size} ${bootdaddr}'