--- /dev/null
+###########################################################################
+# Copyright 2016 IoT.bzh
+#
+# author: José Bollo <jose.bollo@iot.bzh>
+# author: Stéphane Desneux <stephane.desneux@iot.bzh>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###########################################################################
+
+include(GNUInstallDirs)
+
+set(TARGET "root@192.168.1.206")
+set(PROJECT_VERSION "0.1")
+set(PROJECT_ICON "icon.png")
+set(PROJECT_LIBDIR "libs")
+
+set(CMAKE_BUILD_TYPE Debug)
+
+###########################################################################
+
+link_libraries(-Wl,--as-needed -Wl,--gc-sections)
+
+add_compile_options(-Wall -Wextra -Wconversion)
+add_compile_options(-Wno-unused-parameter) # frankly not using a parameter does it care?
+add_compile_options(-Werror=maybe-uninitialized)
+add_compile_options(-Werror=implicit-function-declaration)
+add_compile_options(-ffunction-sections -fdata-sections)
+add_compile_options(-Wl,--as-needed -Wl,--gc-sections)
+add_compile_options(-fPIC)
+add_compile_options(-D_REENTRANT)
+
+set(CMAKE_C_FLAGS_PROFILING "-g -O0 -pg -Wp,-U_FORTIFY_SOURCE")
+set(CMAKE_C_FLAGS_DEBUG "-g -O0 -ggdb -Wp,-U_FORTIFY_SOURCE")
+set(CMAKE_C_FLAGS_RELEASE "-g -O0 -Wall -Werror")
+set(CMAKE_C_FLAGS_CCOV "-g -O0 --coverage")
+
+set(CMAKE_CXX_FLAGS_PROFILING "-g -O0 -std=c++11 -pg -Wp,-U_FORTIFY_SOURCE")
+set(CMAKE_CXX_FLAGS_DEBUG "-g -O0 -std=c++11 -ggdb -Wp,-U_FORTIFY_SOURCE")
+set(CMAKE_CXX_FLAGS_RELEASE "-g -O2 -std=c++11")
+set(CMAKE_CXX_FLAGS_CCOV "-g -O2 -std=c++11 --coverage")
+
+###########################################################################
+
+include(FindPkgConfig)
+
+pkg_check_modules(EXTRAS REQUIRED json-c libsystemd afb-daemon)
+add_compile_options(${EXTRAS_CFLAGS})
+add_compile_options(${EXTRAS_CXXFLAGS})
+
+# Needed to compile openxc-message-format library.
+#
+# The reason you need to do this is that some of your messages contain tag
+# numbers or field sizes that are larger than what can fit in the default
+# 8 bit descriptors.
+add_definitions(-DPB_FIELD_16BIT)
+
+# Needed extra directories to hit the required headers files.
+include_directories(${EXTRAS_INCLUDE_DIRS} ${PROJECT_SOURCE_DIR} ${PROJECT_LIBDIR}/openxc-message-format/gen/cpp ${PROJECT_LIBDIR}/nanopb/ ${PROJECT_LIBDIR}/uds-c/src ${PROJECT_LIBDIR}/bitfield-c/src ${PROJECT_LIBDIR}/isotp-c/src)
+link_libraries(${EXTRAS_LIBRARIES})
+###########################################################################
+# the library used by the binding : openxc, bitfield, uds, isotp
+
+# Bindings to compile
+# --------------------
+file(GLOB filelist "${PROJECT_LIBDIR}/*")
+foreach(filename ${filelist})
+ if(IS_DIRECTORY ${filename})
+ message(STATUS "${filename}")
+ file(GLOB_RECURSE c_list "*.[chpx]")
+ string(REGEX REPLACE "^.*\/(.*)$" "\\1" LIB_NAME ${filename})
+ add_library(${LIB_NAME} STATIC ${c_list})
+ endif(IS_DIRECTORY ${filename})
+endforeach()
+
+#add_library(bitfield STATIC ${PROJECT_LIBDIR}/bitfield-c/src/bitfield/8byte.c ${PROJECT_LIBDIR}/bitfield-c/src/bitfield/bitarray.c ${PROJECT_LIBDIR}/bitfield-c/src/bitfield/bitfield.c ${PROJECT_LIBDIR}/bitfield-c/src/canutil/read.c ${PROJECT_LIBDIR}/bitfield-c/src/canutil/write.c)
+#add_library(isotp STATIC ${PROJECT_LIBDIR}/isotp-c/src/isotp/isotp.c ${PROJECT_LIBDIR}/isotp-c/src/isotp/receive.c ${PROJECT_LIBDIR}/isotp-c/src/isotp/send.c)
+#add_library(uds STATIC ${PROJECT_LIBDIR}/uds-c/src/uds/extras.c ${PROJECT_LIBDIR}/uds-c/src/uds/uds.c)
+#add_library(openxc STATIC ${PROJECT_LIBDIR}/openxc-message-format/gen/cpp/openxc.pb.c ${PROJECT_LIBDIR}/nanopb/pb_encode.c ${PROJECT_LIBDIR}/nanopb/pb_decode.c ${PROJECT_LIBDIR}/nanopb/pb_common.c)
+###########################################################################
+# the binding for afb
+
+message(STATUS "Creation of ${PROJECT_NAME} binding for AFB-DAEMON")
+###########################################################################
+add_library(${PROJECT_NAME} MODULE ${PROJECT_NAME}.cpp configuration.cpp configuration-generated.cpp
+ can/can-bus.cpp can/can-bus-dev.cpp can/can-message-set.cpp can/can-message-definition.cpp can/can-message.cpp can/can-signals.cpp can/can-decoder.cpp
+ diagnostic/diagnostic-message.cpp diagnostic/diagnostic-manager.cpp diagnostic/active-diagnostic-request.cpp
+ utils/signals.cpp utils/openxc-utils.cpp utils/timer.cpp utils/socket.cpp)
+target_link_libraries(${PROJECT_NAME} pthread bitfield-c uds-c isotp-c openxc-message-format)
+
+set_target_properties(${PROJECT_NAME} PROPERTIES
+ PREFIX ""
+ LINK_FLAGS "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/export.map"
+)
+
+###########################################################################
+# WGT packaging
+
+message(STATUS "Creation of ${PROJECT_NAME}.wgt package for AppFW")
+###########################################################################
+configure_file(config.xml.in config.xml)
+configure_file(can_buses.json.in can_buses.json)
+
+add_custom_command(
+ OUTPUT ${PROJECT_NAME}.wgt
+ DEPENDS ${PROJECT_NAME} bitfield isotp uds openxc config.xml.in can_buses.json.in
+ COMMAND rm -rf package
+ COMMAND mkdir -p package/${PROJECT_LIBDIR} package/htdocs package/etc
+ COMMAND cp config.xml package/
+ COMMAND cp can_buses.json package/etc
+ COMMAND cp ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_ICON} package/icon.png
+ COMMAND cp ${PROJECT_NAME}.so package/libs
+ COMMAND wgtpkg-pack -f -o ${PROJECT_NAME}.wgt package
+)
+add_custom_target(widget ALL DEPENDS ${PROJECT_NAME}.wgt)
+
+###########################################################################
+# WGT install
+
+#message(STATUS "Creation of ${PROJECT_NAME}.wgt package for AppFW")
+###########################################################################
+install(CODE "execute_process(
+ COMMAND scp -r src/${PROJECT_NAME}.wgt ${CMAKE_SOURCE_DIR} ${TARGET}:/tmp)"
+ CODE "execute_process(
+ COMMAND ssh ${TARGET} \"/usr/bin/afm-util remove ${PROJECT_NAME}@${PROJECT_VERSION} && /usr/bin/afm-util install /tmp/${PROJECT_NAME}.wgt\")"
+ )
Code Review / apps / low-level-can-service.git / blobdiff