#include "low-can-subscription.hpp"
#include "application.hpp"
#include "canutil/write.h"
+#include "../utils/socketcan-bcm.hpp"
+
+#ifdef USE_FEATURE_J1939
+ #include "../utils/socketcan-j1939.hpp"
+#endif
low_can_subscription_t::low_can_subscription_t()
: index_{-1},
low_can_subscription_t::operator bool() const
{
- return ((can_signal_ != nullptr || ! diagnostic_message_.empty()) && ! socket_);
+ return ((signal_ != nullptr || ! diagnostic_message_.empty()) && ! socket_);
}
afb_event_t low_can_subscription_t::get_event()
{
return index_;
}
-const std::shared_ptr<can_signal_t> low_can_subscription_t::get_can_signal() const
+const std::shared_ptr<signal_t> low_can_subscription_t::get_signal() const
{
- return can_signal_;
+ return signal_;
}
-bool low_can_subscription_t::is_signal_subscription_corresponding(const std::shared_ptr<can_signal_t> can_signal, const struct event_filter_t& event_filter) const
+bool low_can_subscription_t::is_signal_subscription_corresponding(const std::shared_ptr<signal_t> signal, const struct event_filter_t& event_filter) const
{
- return can_signal_ == can_signal && event_filter_ == event_filter;
+ return signal_ == signal && event_filter_ == event_filter;
}
const std::vector<std::shared_ptr<diagnostic_message_t> > low_can_subscription_t::get_diagnostic_message() const
/// or no CAN signal subscribed
const std::string low_can_subscription_t::get_name() const
{
- if (can_signal_ != nullptr)
- return can_signal_->get_name();
+ if (signal_ != nullptr)
+ return signal_->get_name();
else if (!diagnostic_message_.empty())
return "diagnostic_messages";
int ret = 0;
if(! socket_)
{
- if( can_signal_ != nullptr)
- {ret = socket_->open(can_signal_->get_message()->get_bus_device_name());}
+ if( signal_ != nullptr)
+ {ret = socket_->open(signal_->get_message()->get_bus_device_name());}
else if (! diagnostic_message_ .empty())
{ret = socket_->open(application_t::instance().get_diagnostic_manager().get_bus_device_name());}
else if ( ! bus_name.empty())
///
/// @returns a bcm_msg with the msg_head parts set and can_frame
/// zeroed.
-struct utils::bcm_msg low_can_subscription_t::make_bcm_head(uint32_t opcode, uint32_t can_id, uint32_t flags, const struct timeval& timeout, const struct timeval& frequency_thinning) const
+struct bcm_msg low_can_subscription_t::make_bcm_head(uint32_t opcode, uint32_t can_id, uint32_t flags, const struct timeval& timeout, const struct timeval& frequency_thinning) const
{
- struct utils::bcm_msg bcm_msg;
+ struct bcm_msg bcm_msg;
::memset(&bcm_msg, 0, sizeof(bcm_msg));
bcm_msg.msg_head.opcode = opcode;
/// @brief Take an existing bcm_msg struct and add a can_frame.
/// Currently only 1 uniq can_frame can be added, it's not possible to build
/// a multiplexed message with several can_frame.
-void low_can_subscription_t::add_one_bcm_frame(struct canfd_frame& cfd, struct utils::bcm_msg& bcm_msg) const
+void low_can_subscription_t::add_one_bcm_frame(struct canfd_frame& cfd, struct bcm_msg& bcm_msg) const
{
struct can_frame cf;
bcm_msg.msg_head.nframes++;
}
+#ifdef USE_FEATURE_J1939
+int low_can_subscription_t::create_rx_filter_j1939(low_can_subscription_t &subscription, std::shared_ptr<signal_t> sig)
+{
+ subscription.signal_= sig;
+
+ // Make sure that socket is opened.
+ if(subscription.open_socket() < 0)
+ {
+ return -1;
+ }
+ return 0;
+}
+#endif
+
/// @brief Create a RX_SETUP receive job to be used by the BCM socket for a CAN signal
/// subscription
///
/// @return 0 if ok else -1
-int low_can_subscription_t::create_rx_filter(std::shared_ptr<can_signal_t> sig)
+int low_can_subscription_t::create_rx_filter_can(low_can_subscription_t &subscription, std::shared_ptr<signal_t> sig)
{
uint32_t flags;
float val;
struct timeval freq, timeout = {0, 0};
struct canfd_frame cfd;
- can_signal_= sig;
+ subscription.signal_= sig;
if (sig->get_message()->is_fd())
{
flags = SETTIMER|RX_NO_AUTOTIMER;
cfd.len = CAN_MAX_DLEN;
}
- val = (float)(1 << can_signal_->get_bit_size()) - 1;
+ val = (float)(1 << subscription.signal_->get_bit_size()) - 1;
if(! bitfield_encode_float(val,
- can_signal_->get_bit_position(),
- can_signal_->get_bit_size(),
+ subscription.signal_->get_bit_position(),
+ subscription.signal_->get_bit_size(),
1,
- can_signal_->get_offset(),
+ subscription.signal_->get_offset(),
cfd.data,
cfd.len))
return -1;
- frequency_clock_t f = event_filter_.frequency == 0 ? can_signal_->get_frequency() : frequency_clock_t(event_filter_.frequency);
+ frequency_clock_t f = subscription.event_filter_.frequency == 0 ? subscription.signal_->get_frequency() : frequency_clock_t(subscription.event_filter_.frequency);
freq = f.get_timeval_from_period();
- utils::bcm_msg bcm_msg = make_bcm_head(RX_SETUP, can_signal_->get_message()->get_id(), flags, timeout, freq);
- add_one_bcm_frame(cfd, bcm_msg);
+ struct bcm_msg bcm_msg = subscription.make_bcm_head(RX_SETUP, subscription.signal_->get_message()->get_id(), flags, timeout, freq);
+ subscription.add_one_bcm_frame(cfd, bcm_msg);
+
+ return create_rx_filter_bcm(subscription, bcm_msg);
+}
- return create_rx_filter(bcm_msg);
+int low_can_subscription_t::create_rx_filter(std::shared_ptr<signal_t> sig)
+{
+ #ifdef USE_FEATURE_J1939
+ if(sig->get_message()->is_j1939())
+ {
+ return low_can_subscription_t::create_rx_filter_j1939(*this, sig);
+ }
+ else
+ {
+ #endif
+ return low_can_subscription_t::create_rx_filter_can(*this, sig);
+ #ifdef USE_FEATURE_J1939
+ }
+ #endif
+}
+
+
+/// @brief Create a RX_SETUP receive job to be used by the BCM socket for a
+/// diagnostic message subscription.
+///
+/// @return 0 if ok else -1
+int low_can_subscription_t::create_rx_filter(std::shared_ptr<diagnostic_message_t> sig)
+{
+ diagnostic_message_.push_back(sig);
+
+ struct timeval freq = frequency_clock_t(event_filter_.frequency).get_timeval_from_period();
+ //struct timeval timeout = frequency_clock_t(10).get_timeval_from_period();
+ struct timeval timeout = {0,0};
+
+ struct bcm_msg bcm_msg = make_bcm_head(RX_SETUP, OBD2_FUNCTIONAL_BROADCAST_ID, SETTIMER|RX_NO_AUTOTIMER|RX_FILTER_ID, timeout, freq);
+ return create_rx_filter_bcm(*this, bcm_msg);
}
/// @brief Create a RX_SETUP receive job used by the BCM socket directly from
/// a bcm_msg. The method should not be used directly but rather through the
-/// two previous method with can_signal_t or diagnostic_message_t object.
+/// two previous method with signal_t or diagnostic_message_t object.
///
/// If the CAN arbitration ID is the OBD2 functional broadcast id the subscribed
/// to the 8 classics OBD2 functional response ID
///
/// @return 0 if ok else -1
-int low_can_subscription_t::create_rx_filter(utils::bcm_msg& bcm_msg)
+int low_can_subscription_t::create_rx_filter_bcm(low_can_subscription_t &subscription, struct bcm_msg& bcm_msg)
{
// Make sure that socket is opened.
- if(open_socket() < 0)
+ if(subscription.open_socket() < 0)
{return -1;}
// If it's not an OBD2 CAN ID then just add a simple RX_SETUP job
// else monitor all standard 8 CAN OBD2 ID response.
+
+ std::shared_ptr<message_t> msg = std::make_shared<can_message_t>();
+
+ msg->set_bcm_msg(bcm_msg);
+
if(bcm_msg.msg_head.can_id != OBD2_FUNCTIONAL_BROADCAST_ID)
{
- socket_->write_message(bcm_msg);
- if(! socket_)
+ subscription.socket_->write_message(msg);
+ if(! subscription.socket_)
return -1;
}
else
for(uint8_t i = 0; i < 8; i++)
{
bcm_msg.msg_head.can_id = OBD2_FUNCTIONAL_RESPONSE_START + i;
-
- socket_->write_message(bcm_msg);
- if(! socket_)
+ msg->set_bcm_msg(bcm_msg);
+ subscription.socket_->write_message(msg);
+ if(! subscription.socket_)
return -1;
}
}
-
return 0;
}
-/// @brief Create a RX_SETUP receive job to be used by the BCM socket for a
-/// diagnostic message subscription.
-///
-/// @return 0 if ok else -1
-int low_can_subscription_t::create_rx_filter(std::shared_ptr<diagnostic_message_t> sig)
-{
- diagnostic_message_.push_back(sig);
-
- struct timeval freq = frequency_clock_t(event_filter_.frequency).get_timeval_from_period();
- //struct timeval timeout = frequency_clock_t(10).get_timeval_from_period();
- struct timeval timeout = {0,0};
-
- utils::bcm_msg bcm_msg = make_bcm_head(RX_SETUP, OBD2_FUNCTIONAL_BROADCAST_ID, SETTIMER|RX_NO_AUTOTIMER|RX_FILTER_ID, timeout, freq);
- return create_rx_filter(bcm_msg);
-}
-
/// @brief Creates a TX_SEND job that is used by the BCM socket to
/// send a message
///
/// @return 0 if ok else -1
-int low_can_subscription_t::tx_send(struct canfd_frame& cfd, const std::string& bus_name)
+int low_can_subscription_t::tx_send(low_can_subscription_t &subscription, struct canfd_frame& cfd, const std::string& bus_name)
{
- struct utils::bcm_msg bcm_msg = make_bcm_head(TX_SEND, cfd.can_id);
- add_one_bcm_frame(cfd, bcm_msg);
+ struct bcm_msg bcm_msg = subscription.make_bcm_head(TX_SEND, cfd.can_id);
+ subscription.add_one_bcm_frame(cfd, bcm_msg);
- if(open_socket(bus_name) < 0)
+ if(subscription.open_socket(bus_name) < 0)
{return -1;}
- socket_->write_message(bcm_msg);
- if(! socket_)
+
+ std::shared_ptr<message_t> msg = std::make_shared<can_message_t>();
+
+ msg->set_bcm_msg(bcm_msg);
+
+ subscription.socket_->write_message(msg);
+ if(! subscription.socket_.get())
return -1;
return 0;