Copy source code from homescreen-2017
[apps/homescreen.git] / interfaces / windowmanager.xml
diff --git a/interfaces/windowmanager.xml b/interfaces/windowmanager.xml
deleted file mode 100644 (file)
index f288b32..0000000
+++ /dev/null
@@ -1,209 +0,0 @@
-<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN" "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
-<!-- Copyright (C) 2016, 2017 Mentor Graphics Development (Deutschland) GmbH
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License. -->
-<node>
-       <!--
-         org.agl.windowmanager:
-         @short_description: A Layout-based interface for the WindowManager.
-
-         A Layout defines a list of surfaces areas.
-       -->
-       <interface name="org.agl.windowmanager">
-               <!--
-                 addLayout:
-                 @layoutId: A unique ID that represents this layout. If the ID is already in use WINDOWMANAGER_ERROR_ID_ALREADY_DEFINED will be returned.
-                 @layoutName: A user readable string for the layout. If the string is already in use WINDOWMANAGER_ERROR_NAME_ALREADY_DEFINED will be returned.
-                 @surfaceAreas: A list of surface areas.
-                 @error: WINDOWMANAGER_NO_ERROR or the first error that occurred.
-
-                 Add a layout definition to the WindowManayer layout database.
-                 The layout database is temoprary and not stored persistently. It has to be recreated by the client after
-                 a WindowManager restart.
-               -->
-               <method name="addLayout">
-                       <arg name="layoutId" type="i" direction="in"/>
-                       <arg name="layoutName" type="s" direction="in"/>
-                       <arg name="surfaceAreas" type="a(iiii)" direction="in"/>
-                       <annotation name="org.qtproject.QtDBus.QtTypeName.In2" value="QList&lt;LayoutArea&gt;"/>
-                       <arg name="error" type="i" direction="out"/>
-               </method>
-
-               <!--
-                 deleteLayoutById:
-                 @layoutId: The ID of the layout to delete.
-                 @error: WINDOWMANAGER_NO_ERROR or the first error that occurred.
-
-                 Deletes the layout with the given ID. This cannot be the current active layout!
-               -->
-               <method name="deleteLayoutById">
-                       <arg name="layoutId" type="i" direction="in"/>
-                       <arg name="error" type="i" direction="out"/>
-               </method>
-
-               <!--
-                 setLayoutById:
-                 @layoutId: The ID of the layout to activate.
-                 @error: WINDOWMANAGER_NO_ERROR or the first error that occurred.
-
-                 Switch to the layout with the given ID.
-               -->
-               <method name="setLayoutById">
-                       <arg name="layoutId" type="i" direction="in"/>
-                       <arg name="error" type="i" direction="out"/>
-               </method>
-               <!--
-                 setLayoutByName:
-                 @layoutName: The name of the layout to activate.
-                 @error: WINDOWMANAGER_NO_ERROR or the first error that occurred.
-
-                 Switch to the layout with the given name.
-               -->
-               <method name="setLayoutByName">
-                       <arg name="layoutName" type="s" direction="in"/>
-                       <arg name="error" type="i" direction="out"/>
-               </method>
-
-               <!--
-                 getLayoutName:
-                 @layoutId: The ID of the requested layout name.
-                 @layoutName: The name of the layout with the given ID.
-
-                 Request the name of the layout with the given ID. This does not set or activate a layout.
-                 It is just returning the name of the given layout.
-               -->
-               <method name="getLayoutName">
-                       <arg name="layoutId" type="i" direction="in"/>
-                       <arg name="layoutName" type="s" direction="out"/>
-               </method>
-
-               <!--
-                 layout:
-                 The current active layout with all its information.
-               -->
-               <property>
-                       <arg name="layout" type="(isa(iiii))" access="read"/>
-                       <annotation name="org.qtproject.QtDBus.QtTypeName" value="Layout"/>
-               </property>
-               <!--
-                 layoutId:
-                 The current active layout id. This property is redundant, since its info is already available
-                 in the property layout. But this property is more lightweight.
-               -->
-               <property name="layoutId" type="i" access="read"/>
-               <!--
-                 layoutName:
-                 The name of the current active layout. This property is redundant, since its info is already available
-                 in the property layout. But this property is more lightweight.
-               -->
-               <property name="layoutName" type="s" access="read"/>
-
-               <!--
-                 getAllLayouts:
-                 @layouts: A list of all layouts.
-
-                 Returns a list of all layouts that were added to the WindowManager.
-               -->
-               <method name="getAllLayouts">
-                       <arg name="layoutIds" type="a(isa(iiii))" direction="out"/>
-                       <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="QList&lt;Layout&gt;"/>
-               </method>
-
-               <!--
-                 getAvailableLayouts:
-                 @numberOfAppSurfaces: The ID of the requested layout name.
-                 @layoutIds: A list of layouts that offer the exact requested ammount of surface render areas.
-
-                 Returns a list of layouts that offer the exact requested ammount of surface render areas.
-                 If the list is empty, no layout fits the exact ammount.
-               -->
-
-               <method name="getAvailableLayouts">
-                       <arg name="numberOfAppSurfaces" type="i" direction="in"/>
-                       <arg name="layoutIds" type="ai" direction="out"/>
-                       <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="QList&lt;int&gt;"/>
-               </method>
-
-               <!--
-                 setSurfaceToLayoutArea:
-                 @surfaceId: The ID of the surface that shall be positioned.
-                 @layoutAreaId: The ID of the layout area where the surface shall be rendered.
-                 @error: WINDOWMANAGER_NO_ERROR or the first error that occurred.
-
-                 The surface will be scaled to the size of the layout area.
-                 The surface will be made visible with this call.
-               -->
-               <method name="setSurfaceToLayoutArea">
-                       <arg name="surfaceId" type="i" direction="in"/>
-                       <arg name="layoutAreaId" type="i" direction="in"/>
-                       <arg name="error" type="i" direction="out"/>
-               </method>
-
-               <!--
-                 getAvailableSurfaces:
-                 @surfaceIds: A list of all known surfaceIds except for the surfaces created by the Home Screen app.
-
-                 If no surfaces are available, the returned list is empty.
-               -->
-               <method name="getAvailableSurfaces">
-                       <arg name="surfaceIds" type="a(i)" direction="out"/>
-                       <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="QList&lt;int&gt;"/> 
-               </method>
-
-               <!--
-                 surfaceVisibilityChanged:
-                 @surfaceId: The surface that changed.
-                 @visible: True, if the surface is visible.
-
-                 This is emitted when the visible property of the surfaces changes.
-               -->
-               <signal name="surfaceVisibilityChanged">
-                       <arg name="surfaceId" type="i"/>
-                       <arg name="visible" type="b"/>
-               </signal>
-
-               <!--
-                 showLayer:
-                 @layer: The ID of the layer to show. POPUP=0, HOMESCREEN_OVERLAY=1, APPS=2, HOMESCREEN=3
-                 @pid: The PID of the app to show. (used only when layer is APPS=2)
-
-                 Show complete layers.
-                 By default, all layers are shown.
-               -->
-               <method name="showLayer">
-                       <arg name="layer" type="i" direction="in"/>
-                       <arg name="pid" type="i" direction="in"/>
-               </method>
-               <!--
-                 showAppLayer:
-                 @pid: The PID of the app to show.
-
-                 Show layer for application .
-               -->
-               <method name="showAppLayer">
-                       <arg name="name" type="s" direction="in"/>
-                       <arg name="pid" type="i" direction="in"/>
-               </method>
-               <!--
-                 hideLayer:
-                 @layer: The ID of the layer to hide. POPUP=0, HOMESCREEN_OVERLAY=1, APPS=2, HOMESCREEN=3
-
-                 Hide complete layers.
-                 By default, all layers are shown.
-               -->
-               <method name="hideLayer">
-                       <arg name="layer" type="i" direction="in"/>
-               </method>
-       </interface>
-</node>
-