"name": "ETC1",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Trns.Trque.Converter.Lockup.Engaged" : {
"offset": 0,
"comment": "State signal which indicates whether the torque converter lockup is engaged.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"TorqueConverterLockupDisengaged": [0],
"offset": 0,
"comment": "State signal indicating whether or not the transmission torque converter lock up clutch is transitioning between being",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"TransitionIsNotInProcess": [0],
"offset": 0,
"comment": "The source address of the SAE J1939 device currently controlling the transmission.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true
},
"Momentary.Eng.Max.Power.Enable" : {
"offset": 0,
"comment": "Momentarily Requesting highest torque map from the engine control",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"notRqingMaxPowerAvailable": [0],
"comment": "Rotational velocity of the primary shaft transferring power into the transmission.",
"unit": "rpm",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true
},
"Progressive.Shift.Disable" : {
"offset": 0,
"comment": "Command signal used to indicate that progressive shifting by the engine should be disallowed.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"ProgressiveShiftIsNotDisabled": [0],
"offset": 0,
"comment": "Command signal used to indicate that the engine speed may be boosted up to the maximum engine overspeed value to",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"MomentaryEngOverspeedIsDisabled": [0],
"comment": "Parameter which represents the ratio of input shaft speed to current engine speed (in percent).",
"unit": "%",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true
},
"Trans.Output.Shaft.Speed" : {
"comment": "Calculated speed of the transmission output shaft.",
"unit": "rpm",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true
},
"Trans.Shift.In.Process" : {
"offset": 0,
"comment": "Indicates that the transmission is in process of shifting from the current gear to the selected gear.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"ShiftIsNotInProcess": [0],
"offset": 0,
"comment": "Driveline engaged indicates the transmission controlled portion of the driveline is engaged sufficiently to allow a transfer",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"writable" : true,
"states": {
"DrivelineDisengaged": [0],
"name": "EEC1",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Src.AddrssOf.Ctrllng.Dvc.Fr.Eng.Cntrl" : {
"offset": 0,
"comment": "The source address of the SAE J1939 device currently controlling the engine.",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Actl.Eng.Prcnt.Trque.High.Resolution" : {
"generic_name": "Actl.Eng.Prcnt.Trque.High.Resolution",
"comment": "This parameter displays an additional torque in percent of the reference engine torque.",
"unit": "%",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"states": {
"0000": [0],
"0125": [1],
"comment": "The requested torque output of the engine by all dynamic internal inputs, including smoke control, noise control and low",
"unit": "%",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Starter.Mode" : {
"generic_name": "Eng.Starter.Mode",
"offset": 0,
"comment": "There are several phases in a starting action and different reasons why a start cannot take place.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"states": {
"startNotRqed": [0],
"starterActiveGearNotEngaged": [1],
"comment": "Actual engine speed which is calculated over a minimum crankshaft angle of 720 degrees divided by the number of cylinders.",
"unit": "rpm",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Actual.Eng.Percent.Torque" : {
"generic_name": "Actual.Eng.Percent.Torque",
"comment": "The calculated output torque of the engine.",
"unit": "%",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Drivers.Demand.Eng.Percent.Torque" : {
"generic_name": "Drivers.Demand.Eng.Percent.Torque",
"comment": "The requested torque output of the engine by the driver.",
"unit": "%",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Torque.Mode" : {
"generic_name": "Eng.Torque.Mode",
"offset": 0,
"comment": "State signal which indicates which engine torque mode is currently generating, limiting, or controlling the torque.",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"states": {
"Low idle governor/no request (de": [0],
"Accelerator pedal/operator selec": [1],
"name": "HOURS",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Eng.Total.Revolutions" : {
"comment": "Accumulated number of revolutions of engine crankshaft during its operation.",
"unit": "r",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Total.Hours.Of.Operation" : {
"generic_name": "Eng.Total.Hours.Of.Operation",
"comment": "Accumulated time of operation of engine.",
"unit": "hr",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
}
}
},
"name": "VDC2",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Steer.Wheel.Angle" : {
"comment": "The main operator`s steering wheel angle (on the steering column, not the actual wheel angle).",
"unit": "rad",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Longitudinal.Acceleration" : {
"generic_name": "Longitudinal.Acceleration",
"comment": "Indicates the longitudinal acceleration of the vehicle.",
"unit": "m/s/s",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Lateral.Acceleration" : {
"generic_name": "Lateral.Acceleration",
"comment": "Indicates a lateral acceleration of the vehicle.",
"unit": "m/s/s",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Yaw.Rate" : {
"generic_name": "Yaw.Rate",
"comment": "Indicates the rotation about the vertical axis.",
"unit": "rad/s",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Steer.Wheel.Angle.Sensor.Type" : {
"generic_name": "Steer.Wheel.Angle.Sensor.Type",
"offset": 0,
"comment": "Indicates whether the steering wheel angle sensor is capable of absolute measuring of the number of steering wheel",
"is_big_endian": false,
- "is_signed": false,
+ "sign": 0,
"states": {
"RelativeMeasuringPrinciple": [0],
"AbsMeasuringPrinciple": [1],
"comment": "Indicates number of steering wheel turns, absolute position or relative position at ignition on.",
"unit": "turns",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
}
}
},
"name": "EBC2",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Rlative.Speed.Rear.Axle2.Right.Wheel" : {
"comment": "The speed of the rear axle #2, right wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Relative.Speed.Rear.Axle2.Left.Wheel" : {
"generic_name": "Relative.Speed.Rear.Axle2.Left.Wheel",
"comment": "The speed of the rear axle #2, left wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Rlative.Speed.Rear.Axle1.Right.Wheel" : {
"generic_name": "Rlative.Speed.Rear.Axle1.Right.Wheel",
"comment": "The speed of the rear axle #1, right wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Relative.Speed.Rear.Axle1.Left.Wheel" : {
"generic_name": "Relative.Speed.Rear.Axle1.Left.Wheel",
"comment": "The speed of the rear axle #1, left wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Rlative.Speed.Front.Axle.Right.Wheel" : {
"generic_name": "Rlative.Speed.Front.Axle.Right.Wheel",
"comment": "The speed of the front axle, right wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Relative.Speed.Front.Axle.Left.Wheel" : {
"generic_name": "Relative.Speed.Front.Axle.Left.Wheel",
"comment": "The speed of the front axle, left wheel relative to the front axle speed, SPN 904.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Front.Axle.Speed" : {
"generic_name": "Front.Axle.Speed",
"comment": "The average speed of the two front wheels.",
"unit": "km/h",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
}
}
},
"name": "ET1",
"bus" : "j1939",
"is_fd" : false,
- "is_extended": false,
"is_j1939" : true,
"signals" : {
"Eng.Fuel.Temp1" : {
"comment": "Temperature of fuel (or gas) passing through the first fuel control system.",
"unit": "deg C",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Intercooler.Thermostat.Opening" : {
"generic_name": "Eng.Intercooler.Thermostat.Opening",
"comment": "The current position of the thermostat used to regulate the temperature of the engine intercooler.",
"unit": "%",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Intercooler.Temp" : {
"generic_name": "Eng.Intercooler.Temp",
"comment": "Temperature of liquid found in the intercooler located after the turbocharger.",
"unit": "deg C",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Turbo.Oil.Temp" : {
"generic_name": "Eng.Turbo.Oil.Temp",
"comment": "Temperature of the turbocharger lubricant.",
"unit": "deg C",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Oil.Temp1" : {
"generic_name": "Eng.Oil.Temp1",
"comment": "Temperature of the engine lubricant.",
"unit": "deg C",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
},
"Eng.Coolant.Temp" : {
"generic_name": "Eng.Coolant.Temp",
"comment": "Temperature of liquid found in engine cooling system.",
"unit": "deg C",
"is_big_endian": false,
- "is_signed": false
+ "sign": 0
}
}
}