=================
For the runtime program, you always need *pb.h* for type declarations.
-Depending on whether you want to encode, decode or both, you also need *pb_encode.h/c* or *pb_decode.h/c*.
+Depending on whether you want to encode, decode, or both, you also need *pb_encode.h/c* or *pb_decode.h/c*.
-The high-level encoding and decoding functions take an array of *pb_field_t* structures, which describes the fields of a message structure. Usually you want these autogenerated from a *.proto* file. The tool string *nanopb_generator.py* accomplishes this.
+The high-level encoding and decoding functions take an array of *pb_field_t* structures, which describes the fields of a message structure. Usually you want these autogenerated from a *.proto* file. The tool script *nanopb_generator.py* accomplishes this.
+
+.. image:: generator_flow.png
So a typical project might include these files:
- pb_encode.h and pb_encode.c (needed for encoding messages)
2) Protocol description (you can have many):
- person.proto (just an example)
- - person.c (autogenerated, contains initializers for const arrays)
- - person.h (autogenerated, contains type declarations)
+ - person.pb.c (autogenerated, contains initializers for const arrays)
+ - person.pb.h (autogenerated, contains type declarations)
Features and limitations
========================
**Features**
#) Pure C runtime
-#) Small code size (2–10 kB depending on processor)
-#) Small ram usage (typically 200 bytes)
+#) Small code size (2–10 kB depending on processor, plus any message definitions)
+#) Small ram usage (typically ~300 bytes, plus any message structs)
#) Allows specifying maximum size for strings and arrays, so that they can be allocated statically.
-#) No malloc needed: everything is stored on the stack.
+#) No malloc needed: everything can be allocated statically or on the stack.
#) You can use either encoder or decoder alone to cut the code size in half.
+#) Support for most protobuf features, including: all data types, nested submessages, default values, repeated and optional fields, packed arrays, extension fields.
+#) Callback mechanism for handling messages larger than can fit in available RAM.
+#) Extensive set of tests.
**Limitations**
#) User must provide callbacks when decoding arrays or strings without maximum size. Malloc support could be added as a separate module.
-#) Some speed has been sacrificed for code size. For example varint calculations are always done in 64 bits.
+#) Some speed has been sacrificed for code size.
#) Encoding is focused on writing to streams. For memory buffers only it could be made more efficient.
#) The deprecated Protocol Buffers feature called "groups" is not supported.
#) Fields in the generated structs are ordered by the tag number, instead of the natural ordering in .proto file.
#) Unknown fields are not preserved when decoding and re-encoding a message.
+#) Reflection (runtime introspection) is not supported. E.g. you can't request a field by giving its name in a string.
#) Numeric arrays are always encoded as packed, even if not marked as packed in .proto. This causes incompatibility with decoders that do not support packed format.
-#) Cyclic references between messages are not supported. They could be supported in callback-mode if there was an option in the generator to set the mode.
+#) Cyclic references between messages are supported only in callback mode.
Getting started
===============
The number of bytes in the message is stored in *stream.bytes_written*.
You can feed the message to *protoc --decode=Example message.proto* to verify its validity.
-For complete examples of the simple cases, see *tests/test_decode1.c* and *tests/test_encode1.c*. For an example with network interface, see the *example* subdirectory.
+For a complete example of the simple case, see *example/simple.c*.
+For a more complex example with network interface, see the *example/network_server* subdirectory.
Compiler requirements
=====================
-Nanopb should compile with most ansi-C compatible compilers. It however requires a few header files to be available:
+Nanopb should compile with most ansi-C compatible compilers. It however
+requires a few header files to be available:
#) *string.h*, with these functions: *strlen*, *memcpy*, *memset*
#) *stdint.h*, for definitions of *int32_t* etc.
#) *stddef.h*, for definition of *size_t*
#) *stdbool.h*, for definition of *bool*
-If these header files do not come with your compiler, you should be able to find suitable replacements online. Mostly the requirements are very simple, just a few basic functions and typedefs.
+If these header files do not come with your compiler, you can use the
+file *extra/pb_syshdr.h* instead. It contains an example of how to provide
+the dependencies. You may have to edit it a bit to suit your custom platform.
-Debugging and testing
-=====================
-Extensive unittests are included under the *tests* folder. Just type *make* there to run the tests.
+To use the pb_syshdr.h, define *PB_SYSTEM_HEADER* as *"pb_syshdr.h"* (including the quotes).
+Similarly, you can provide a custom include file, which should provide all the dependencies
+listed above.
+
+Running the test cases
+======================
+Extensive unittests and test cases are included under the *tests* folder.
+
+To build the tests, you will need the `scons`__ build system. The tests should
+be runnable on most platforms. Windows and Linux builds are regularly tested.
+
+__ http://www.scons.org/
-This also generates a file called *breakpoints* which includes all lines returning *false* in nanopb. You can use this in gdb by typing *source breakpoints*, after which gdb will break on first nanopb error.
+In addition to the build system, you will also need a working Google Protocol
+Buffers *protoc* compiler, and the Python bindings for Protocol Buffers. On
+Debian-based systems, install the following packages: *protobuf-compiler*,
+*python-protobuf* and *libprotobuf-dev*.
-Wishlist
-========
-#) A specialized encoder for encoding to a memory buffer. Should serialize in reverse order to avoid having to determine submessage size beforehand.
-#) A cleaner rewrite of the Python-based source generator.
-#) Better performance for 16- and 8-bit platforms: use smaller datatypes where possible.