rewrote quickstart, build-process

[AGL/documentation.git] / docs / 4_APIs_and_Services / 4.5_Message_Signaling / 7_CanDevStudio_Quickstart / candevstudio / 2_can_device_socketcan_backend.md

diff --git a/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/2_can_device_socketcan_backend.md b/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/2_can_device_socketcan_backend.md
deleted file mode 100644 (file)
index 1a6a52b..0000000
--- a/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/2_can_device_socketcan_backend.md
+++ /dev/null
@@ -1,44 +0,0 @@
----
-edit_link: ''
-title: Bringing up a CAN device using socketcan backend
-origin_url: >-
-  https://raw.githubusercontent.com/automotive-grade-linux/docs-sources/master/agl-documentation/candevstudio/docs/2_can_device_socketcan_backend.md
----
-
-<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/apis_services/master/candevstudio-developer-guides-api-services-book.yml -->
-
-# Bringing up a CAN device using socketcan backend
-
-* [Using a supported Linux CAN device](https://www.elinux.org/CAN_Bus):
-
-```bash
-# Find your interface name (e.g. can0)
-ip link
-# Configure bitrate
-sudo ip link set can0 type can bitrate 1000000
-# Bring the device up
-sudo ip link set can0 up
-# Optionally configure CAN termination
-sudo ip link set can0 type can termination 1
-```
-
-## Using slcand
-
-* Based on FTDI Serial driver
-* Requires slcand to "convert" serial device to SocketCAN.
-* Officially supported in Linux Kernel v2.6.38
-
-```bash
-# Create SocketCAN device from serial interface
-sudo slcand -o -c -s8 -S1000000 /dev/ttyUSB0 can0
-# Bring the device up
-sudo ip link set can0 up
-```
-
-## Using builtin Linux kernel virtual CAN module vcan
-
-```bash
-sudo modprobe vcan
-sudo ip link add dev can0 type vcan
-sudo ip link set can0 up
-```